Week Technology Ltd.

The cdm7160 co2 module uses a compact ndir co2 sensor, featuring excellent performance characteristics, including high accuracy and low power consumption. Two detector elements inside the module make absolute measurement possible.

Features
* small size
* low power
* high accuracy
* absolute measurement via dual sensors

Application examples
* indoor air quality control
* fresh air ventilators
* air conditioners
* automatic fans and window openers

Features:
1, gas concentration is digitally and quantitively output by means of communications
2, alarm output can be set through programming
3, factory calibrated, temperature compensated
4, compact size, low cost

Applications
1, front-end solution for methane gas alarm
2, simple methane gas alarm output

MS5803-14BA
Miniature 14 bar Module

Description:
The MS5803-14BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 1cm and below. The sensor module includes a high linear pressure sensor and an ultra low power 24 bit Î?Σ ADC with internal factory calibrated coefficients. It provides a precise digital 24 Bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a depth measurement systems and thermometer function without any additional sensor. The MS5803-14BA can be interfaced to any microcontroller. The communication protocol is simple, without the need to programming internal registers in the device. The gel protection and antimagnetic stainless steel cap protects against 30 bar overpressure waterproof. This new sensor module generation is based on leading MEMS technology and latest benefits from the Intersema's proven experience and know-how in high volume manufacturing of pressure modules have been widely used for over a decade. This sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal.

Features:
* High resolution 0.2 mbar
* Fast conversion down to 1 ms
* Low power, 1 μA (standby < 0.15 μA)
* Integrated digital pressure sensor (24 bit Σ ADC)
* Supply voltage 1.8 to 3.6 V
* Operating range: 0 to 14 bar, -40 to +85 'C
* I2C and SPI (Mode 0, 3)
* No external components (Internal oscillator)
* Excellent long term stability
* Hermetically sealable for outdoor devices

Applications:
* Mobile water depth measurement systems
* Diving computers
* Adventure or multi-mode watches

1. Features
Single Supply Voltage Operation
Voltage Output
High Sensitivity and Good Solar Blindness
Small and Compact Size

2. Applications
UV-A Lamp Monitoring

3. Absolute Maximum Ratings
Storage Temperature: -40~90'C
Operating Temperature: -30~85'C
Supply Voltage: 5.5V
Soldering Temperature: 260'C

4. Characteristics (at 25'C)
Supply Voltage: 1.8~5.5V
Supply Current: 50µA
Responsivity: 1.8mV/nW
Spectral Detection Range: 220~370nm
Output Voltage: 1.88V
Offset Voltage: 0.01V
Detection Power Range: 0~2.7mW/cm2
Rising Time: 3ms

Properties of the SG01D-5LENS UV photodiode
Broadband UVA+UVB+UVC, PTB reported high chip stability, for very weak radiation
Radiation sensitive area A = 11.0 mm2
TO5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
10uW/cm2 peak radiation results a current of approx. 350 nA

TGS2602 - for the detection of Air Contaminants

Features
* High sensitivity to VOCs and odorous gases
* Low power consumption
* High sensitivity to gaseous air contaminants
* Long life
* Uses simple electrical circuit
* Small size

Applications
* Air cleaners
* Ventilation control
* Air quality monitors
* VOC monitors
* Odor monitors

The sensing element is comprised of a metal oxide semiconductor layer formed on the alumina substrate of a sensing chip together with an integrated heater. In the presence of detectable gas, sensor conductivity increases depending on gas concentration in the air. A simple electrical circuit can convert the change in conductivity to an output signal which corresponds to the gas concentration.

The TGS2602 has high sensitivity to low concentrations of odorous gases such as ammonia and H2S generated from waste materials in office and home environments. The sensor also has high sensitivity to low concentrations of VOCs such as toluene emitted from wood finishing and construction products.

Due to miniaturization of the sensing chip, TGS2602 requires a heater current of only 56mA and the device is housed in a standard TO-5 package.

Specification
Model number: TGS2602-B00
Sensing principle: MOS type
Standard package: TO-5 metal can
Target gases: Air contaminants (VOCs, ammonia, H 2 S, etc.)
Typical detection range: 1 ~ 30ppm of EtOH

CGM6812-B00 Pre-calibrated module for combustible gas

Features:
Linear analog output proportional to gasconcentration
Maintenance free
Compact size
Meets RoHS requirements

Applications:
Gas leak detection in fuel cell systems
Hydrogen & combustible gas leakdetectors

The CGM6812-B00 combustible gas sensor module is a new unit which utilizes TGS6812, Figaro's catalytic pellistor type gas sensor which features durability and stability. This module provides analog output voltage proportional to hydrogen gas concentration. CGM6812-B00 has conformal coatings for moisture-proofing and electrical insulation purposes, and is also capable of detecting sensor wire breakage. The unit has a wide range of operating temperature from -10'C to +60'C.

Because the TGS6812 sensor can detect methane and LP gas as well as hydrogen, this module is suitable for gas leak detection in stationary fuel cells which use hydrogen generated from combustible gases.

Figaro's tgs5141 is a battery operable electrochemical sensor which uses a unique electrolyte that eliminates the need for a water reservoir. By eliminating the water reservoir used in tgs5042, the comparative size of tgs5141 is reduced to just 10% of tgs5042. With its ultra compact size, this sensor is the ideal choice for size oriented applications such as portable co detectors, small residential co detectors, and multi-sensor fire detectors. Oem customers will find individual sensors data printed on each sensor in bar code form, enabling users to skip the costly gas calibration process and allowing for individual sensor tracking.

Features:
* ultra compact
* battery operable
* high repeatability/selectivity to co
* linear relationship between co gas concentration and sensor output
* simple calibration
* long life
* ul recognized component
* meets ul2034, en50291, and en54-31 requirements

Applications:
* residential and commercial co detectors
* fire detection

Temperature and humidity sensor module HTF3223

Description
Based on the rugged HS1101LF humidity sensor, HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output.

MAIN FEATURES
* Size and connector type match existing humidity modules.
* Stable, linear proportional frequency output from 10 to 95% RH.
* Calibrated within +/- 5% RH @ 55% RH.
* Optional 10 K +/- 3% NTC temperature sensor (HTF 3223)
* Stable characteristics with temperature.
* High reliability and long term stability

HUMIDITY SENSOR SPECIFIC FEATURES
* Instantaneous de-saturation after long periods in saturation phase.
* Fast response time.
* High resistance to chemicals.
* Not affected by water immersion.
* Patented solid polymer structure.

TEMPERATURE SENSOR SPECIFIC FEATURES
* High quality thermistor
* Stable
* High sensitivity

MAXIMUM RATINGS
Storage Temperature: -40 to 85 °C
Storage Humidity Range: 0 to 100 % RH
Supply Voltage (Peak): 7 Vdc
Humidity Operating Range: 0 to 99 % RH
Temperature Operating Range: -30 to 80 °C

The CMM5042 carbon monoxide sensor module is a new unit which utilizes TGS5042, Figaro's electrochemical CO sensor, a widely used model for residential and commercial CO detectors with excellent durability and long term stability. This module provides analog output voltage proportional to CO concentration. CMM5042 is capable of detecting sensor trouble.

Customers can easily design CO detectors with the ready- to-use module.

CMM5042 Carbon Monoxide (CO) Gas Sensor Module Features:
* Ease of use
* Linear analog output proportional to gas concentration
* Maintenance free
* Battery operable

CMM5042 Carbon Monoxide (CO) Gas Sensor Module Applications:
* Residential and commercial CO detectors
* Ventilation control
* CO monitor for gas boilers, kerosene heaters, etc.

FSM-T-04A Combustible gas sensor Module Features:
* Linear analog output proportional to gas concentration
* Maintenance free
* Compact size
* Meets RoHS requirements

FSM-T-04A Combustible Gas sensor Module Applications:
* Gas leak detection in fuel cell systems
* Hydrogen & combustible gas leak detectors

The FSM-T-04A combustible gas sensor module is a new unit which utilizes TGS6812, catalytic pellistor type gas sensor which features durability and stability. This module provides analog output voltage proportional to hydrogen gas concentration.(There is a memory in module, where factory calibration data has been store). FSM-T-04A has conformal coatings for moisture proofing and electrical insulation purposes, and is also capable of detecting sensor wire breakage. The unit has a wide range of operating temperature from -10 to +70'c.

Furthermore, the unit can detect CH4, LPG, H2. It is less sensitivity to VOCs gas, it immunes poison by silicon compounds, it suits to work at rugged environment.

FSM-T-04A Combustible Gas Sensor Module Specification:
Product name: Combustible gas sensor module
Model No.: FSM-T-04A
Gas sensor: TGS6812 (catalytic type)
Detection range: 0 ~ 50,000ppm CH4 (also can detect methane, iso-butane, and propane)
Error: ±3%LEL

FSM-BP-01Combustible gas sensor Module Features:
* PWM, USART digital output proportional to gas concentration
* Maintain Free
* Compact size, low cost
* Meets RoHS requirement

FSM-BP-01Combustible Gas sensor Module Applications:
* Detect flammable gas leakage
* Flammable gas leakage Detector
* Industrial detector

FSM-BP-01 is pre-calibrated module for LPG gas alarm which applies TGS2610-D00 sensor together, it features durability and stability. The module outputs PWM signal which is proportional to LPG gas concentration (The module has a memory which is stored with factory calibration data), also is capable of detecting sensor wire breakage and short. The module can operate at wide temperature from -10~70'C.

Furthermore, the unit is less sensitivity to VOCs gas, it immunes poison by silicon compounds, it suits to work at rugged environment.

FSM-BP-01Combustible Gas Sensor Module Specification:
Product name: Combustible gas sensor module
Model No.: FSM-BP-01
Gas sensor: TGS2610-D00(Semiconductor)
Detection range: 0 ~ 4,000ppm H2 (also can detect methane, iso-butane, and propane)
Error: ±300ppm

MB1010 LV-MaxSonar-EZ1 Ultrasonic Rangefinder Product Description
The LV-MaxSonar-EZ1 is the original MaxSonar product. This is our most popular indoor ultrasonic sensor and is a great low-cost general-purpose sensor for a customer not sure of which LV-MaxSonar-EZ sensor to use.

MB1010 LV-MaxSonar-EZ1 Ultrasonic Rangefinder Features and Benefits
* Most popular ultrasonic sensor
* Low power consumption
* Easy to use interface
* Can detect people to 8 feet
* Great balance between sensitivity and object rejection
* Can be powered by many different types of power sources

MB1010 LV-MaxSonar-EZ1 Ultrasonic Rangefinder Applications and Uses
* Great for people detection
* Security
* Motion detection
* Used with battery power
* Autonomous navigation
* Educational and hobby robotics
* Collision avoidance

MB7052 XL-MaxSonar-WRM1
High Performance Ultrasonic Precision Rangefinder

MB7052 XL-MaxSonar-WRM1 Ultrasonic Rangefinder Product Description
The XL-MaxSonar-WRM1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is one of our advanced weather resistant sensors designed for target detection and ranging outdoors or in tank or bin applications.

The weather resistant XL-MaxSonar-WRM1 is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4inch PVC pipe fittings.

High output acoustic power combined with continuously variable gain, realtime background automatic calibration, realtime waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XLMaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.

MB7052 XL-MaxSonar-WRM1 Ultrasonic Rangefinder Features and Benefits
* Clutter rejection provides range to the largest amplitude reflection within the field of view
* Real-time calibration, noise rejection and additional filtering provides stable range information
* Excellent for ranging to large objects in the presence of cluttered or noisy environments
* Excellent for applications that require consistently accurate outputs
* Impressive acoustic and electrical noise resistance
* 6.6Hz refresh rate on the MB7052

MB7052 XL-MaxSonar-WRM1 Ultrasonic Rangefinder Applications and Uses
* Autonomous Navigation
* Environments with acoustic and electrical noise
* Bin Level Measurement
* Tank Level Measurement

Mb1003 hrlv-maxsonar-ez0
High performance ultrasonic rangefinder

Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product description
The hrlv-maxsonar-ez0 has the widest and most sensitive beam pattern of any unit from hrlv-maxsonar-ez sensor line. This makes the hrlv-maxsonar-ez0 an excellent choice for use where high sensitivity, wide beam, or people detection is desired.

Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product specifiations
* resolution of 1mm
* 10hz reading rate
* 42khz ultrasonic sensor measures distance to objects
* rohs compliant
* maximum range of 5000 mm (195 inches)
* operates from 2.5v-5.5v
* low 3.1ma average current requirement
* operational temperature from 0'c to +65'c

Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder features and benefits
* factory calibrated wide beam width
* low operating voltages from 2.5v to 5.5v
* all range outputs are active simultaneously
* high acoustic sensitivity
* detects small targets to longer distances
* widest beam width for the hrlv-maxsonar-ez sensors

Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder applications and uses
* people detection
* small target detection
* high sensitivity applications
* obstacle avoidance

Fti-10 single-channel fiber optic signal conditioner description
The fti-10 is a single-channel, battery-powered fiber optic signal conditioner especially designed to work with all of fiso's fiber optic sensors. It is a general purpose instrument ideally suited to perform single-point measurements in a myriad of industrial and r&d applications.

Fti-10 single-channel fiber optic signal conditioner key features
* compatible with most of fiso's fiber optic sensors
* voltage output and rs-232 communication port
* backlighted lcd screen
* small footprint
* rugged and easy to use
* battery powered
* 1/8 din enclosure

Fti-10 single-channel fiber optic signal conditioner applications
* microwave food processing
* thermotherapy
* nmr applications
* microwave and rf
* high temperature pressure measurements
* multi-purpose laboratory applications
* advanced composite materials
* hazardous environments
* aerospace applications

Fti-10 single-channel fiber optic signal conditioner specifications:
* number of channels: 1
* sampling rate: 10 hz
* averaging: 1 to 500 samples
* precision: 0.025% of full scale
* resolution: 0.01% of full scale
* analog output: +/-10 v with screw connectors
* operating temperatureâ??: -20'c to 40'c (-4'f to 104'f)

SG01S-C18
UVC-only SiC based UV photodiode A = 0.06 mm2

Properties of the SG01S-C18 UV Photodiode
* UVC-only sensitivity, compliant with DVGW W294, PTB reported high chip stability
* Active Area A = 0.06 mm2
* TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10mW/cm2 peak radiation results a current of approx. 720 nA

SG01S-C18 UV Photodiode Specifications
* Typical Responsivity at Peak Wavelength: 0,120/AW
* Wavelength of max. Spectral Responsivity: 275nm
* Responsivity Range: 225 - 287nm
* Active Area: 0.06mm2
* Dark Current (1V reverse bias): 0.2fA
* Capacitance: 15pF
* Short Circuit (10mW/cm2 at peak): 720nA
* Temperature Coefficient: < 0.1%/K
* Operating Temperature: -55 ~ +170°C
* Storage Temperature: -55 ~ +170°C
* Soldering Temperature (3s): 260°C

High-Reliability CO2 Module For Various Applications IAQ, Greenhouse, HVAC
* Use Dual Beam NDIR technology to improve the long term stability
* Cost - effective CO2 monitors made with IR-SOC technology
* Small Module for OEM

ZG09 High-Reliability CO2 Sensor Module Application:
* IAQ (Indoor air quality)
* Greenhouse
* HVAC.DCV (Demand Control Ventilation)

ZG09 High-Reliability CO2 Sensor Module Specification
* CO2 Measurement Range: 0~10,000ppm/1.0%??
* Operating temperature: 0~50'C (32~122'F)
* Operating humidity: 0-95% RH, non-condensing
* CO2 Accuracy: ±50ppm ±3% of reading
* Repeatibility: ±20ppm
* Resolution: 1ppm
* Response Time: About 1 min

MB1260 XL-MaxSonar-EZL0
High Performance Ultrasonic Rangefinder

MB1260 XL-MaxSonar-EZL0 Ultrasonic Rangefinder Product Description
The XL-MaxSonar-EZL0 offers the widest and most sensitive beam pattern of any indoor sensor we currently offer. This makes the XL-MaxSonar-EZL0 an excellent choice wherever wide beam detection, reliable people detection, or reliable small obstacle detection are required. In addition to detecting small objects, the XL-MaxSonar-EZL0 can also detect large targets to the extended range of 1068 cm (420 inches)

The sensor is small in size, yet the high output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and real-time noise rejection algorithms results in virtually noise free distance readings for most users. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL-MaxSonar-EZ sensor line is factory calibrated to match the sensor beam patterns and provides a long range detection zone.

MB1260 XL-MaxSonar-EZL0 Ultrasonic Rangefinder Product Specifications
* Resolution of 1 cm
* 10Hz reading rate
* 42kHz Ultrasonic sensor measures distance to objects
* RoHS Compliant
* Virtually no dead zone, objects closer than 25 cm range as 25 cm
* Operates from 3.3-5.5V
* Low 3.4mA average current requirement
* Operational Temperature from 0'C to +65'C (32'F to +149'F)
* Maximum range of 1068 cm (420 inches)

MB1260 XL-MaxSonar-EZL0 Ultrasonic Rangefinder Features and Benefits
* Shares same beam pattern with MB1200
* Maximum range of 1068cm to large targets
* Low power consumption
* Easy to use interface
* Can detect people to approximately 18feet
* 3.3v to 5v operational voltage

MB1260 XL-MaxSonar-EZL0 Ultrasonic Rangefinder Applications and Uses
* Great for people detection
* Security
* Motion detection
* Used with battery power
* Autonomous navigation
* Educational and hobby robotics
* Collision avoidance
* Long range detection

Ze08-ch2o electrochemical ch2o detection module profile
Ze08-ch2o is a general-purpose and miniaturization electrochemical formaldehyde detection module. It utilizes electrochemical principle to detect ch2o in air which makes the module with high selectivity and stability. It is built-in temperature sensor to make temperature compensation. It has the digital output and analog voltage output at the same time. It is a combination of mature electrochemical detection principle and sophisticated circuit design.

Ze08-ch2o electrochemical ch2o detection module features
, high sensitivity &resolution, low power consumption, long life
, uart/analog voltage/pwm wave output
, good stability, excellent ability of anti-interference
, temperature compensation , excellent linear output

Ze08-ch2o electrochemical ch2o detection module main application
Portable detector, air-quality monitor, air cleaner, air renewal system, air conditioner, smart home.

Ze08-ch2o electrochemical ch2o detection module technical parameters
, target gas: ch2o
, interference gas: alcohol, co &ect.
, working voltage: 3.7v~9v
, response time: 60s
, detection range: 0~5ppm
, resolution: 0.01ppm
, operating temp.: 0~50
, operating hum.: 15%rh-90%rh(no condensation)
, working life: 2 years (in air)

Sck-11 dual axis inclinometer module description
The dual axis inclinometer module sck-11 was designed to stationary measurements of inclinations of two orthogonal axes in relation to earth. Recommended range of measured angles maintains from -70 to +70 deg. Due storing of new scaling values to internal registers it is possible to change measurement unit and resolution to any other linear. Build in offset registers allows user to measure relative angles and self zeroing after mounting. In addition to two registers containing information about sck-11 installation plane angle relative to the earth (two angles with the offset function), threre are available additional two records containing information on the accelerations in the same axes, what makes measurement of transducer movement more precision.

Sck-11 dual axis inclinometer module features
- power supply, : 10 - 36v dc,
- measurement range, : +/-70 deg. In relation to earth,
- protection level, : ip 67,
- weigh, t: 350 g,
- two measurement channels
- build-in temperature sensor
- resistance for mechanical damages
- aluminium housing

Sck-11 dual axis inclinometer module applications
Possible application fields:
- industry and farming
- position control equipement
- measurement systems of lifts etc.

SH-300-NDTH NDIR Carbon Dioxide Sensor Module Features
* Best Extremely Precise Sensor
* Quick Response Time
* Long Time Use, Stable performance at High & Low Temperature
* Waterproof Filter for anti static filters fine dust and humidity in the air
* One-way air indraft for represent average value when momentary CO2 Value change in the air
* Low Current consumption
* Output support: UART, 0~3V Analog

SH-300-NDTH NDIR Carbon Dioxide Sensor Module Application
* CO2 Control for IAQ
* Building, Hospital, School
* Air cleaner, Air conditioner
* Mushroom control, Boiler control

SH-300-NDTH NDIR Carbon Dioxide Sensor Module Technical Specification
* Measuring Type: Non-Dispersive Infrared (NDIR)
* Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm
* Accuracy: FS ±2%, measured value±3% @ 0 ~ 50'C
* Response Time: Every 2.0 Seconds
* Warm-Up Time @25'C: < 90sec
* Output support: UART, 0~3V Analog
* Operating Temperature: 0 ~ 50'C
* Operating Humidity: 0 ~ 95%RH (Non Condensing)

SF800 - Low Pressure Flow Meter

The patented SF800 is an all purpose flow meter with an excellent price-performance ratio. It is suitable for a wide range of applications and large variety of fluids, and covers flow velocities of 0.5 to 20 liter per minute at temperatures of -20 to +90°C and an operating pressure of 16 bar (max 40 bar).

The SF800 is entirely made of high-quality plastics and composites with great chemical and thermal resilience. The housing is made of PVDF, a high grade PVC, while the internal rotor of only 0.04 gram is made of Vectra, a liquid crystal polymer of very low weight. Both material are not susceptible to limescale.

An integrated PCB emits the infrared signal, which is interrupted by the three blades of the rotor. SMD components transform the interrupted signal into a pulse.

SF800 Low Pressure Flow Meter Specifications
* Flow velocity: 0.5 ~ 20 litre per minute
* Temperature: -20 ~ +90 deg C
* Operating pressure: 16 bar
* Max. pressure: 40 bar
* Power consumption: 12 - 36 mA/s
* Material: PVDF, Vectra (rotor), Viton or EPDM
* Output: frequencyPower consumption: 12 - 36 mA/s

Air contaminants sensor tgs2602 in stock

The tgs 2600 has high sensitivity to low concentrations of gaseous air contaminants such as hydrogen and carbon monoxide which exist in cigarette smoke. The sensor can detect hydrogen at a level of several ppm.

Due to miniaturization of the sensing chip, tgs 2600 requires a heater current
Of only 42ma and the device is housed in a standard to-5 package.

TS318-1B0814 Infrared Thermopile Temperature Sensor DESCRIPTION
TS318-1B0814 used for contactless temperature measurement in many applications; transfer the heat radiation emitted from the objects into a voltage output.

TS318-1B0814 Infrared Thermopile Temperature Sensor Features
* Thermopile IR-Sensor
* For Contactless Temperature Measurement
* Single Element
* Small Package for Ear Thermometer
* High Signal
* Flat Filter
* Accurate Reference Sensor

TS318-1B0814 Infrared Thermopile Temperature Sensor FEATURES
* High Signal
* Ni-RTD Reference Sensor
* Small TO-18 Package
* 8-14um Band Pass Filter for measurement distances >0.5m

TS318-1B0814 Infrared Thermopile Temperature Sensor APPLICATIONS
* Pyrometers (general)
* Industrial Pyrometers

DGS-Ethanol 968-035 Digital Breath Alcohol Sensor Module DESCRIPTION
Easily add Breath Alcohol sensing to your IoT application with our digital gas sensor module that provides a calibrated and temperature compensated output.

0 to 800 ppm Breath Alcohol sensor with digital output.

DGS-Ethanol 968-035 Digital Breath Alcohol Sensor Module BENEFITS
* Low Power 1 mW @ 1 minute sampling
* Calibrated & Temp. Compensated Output
* Simple Digital UART Interface
* Integrated T & RH Sensors
* Robust 10-year Estimated Lifetime
* ROHS Compliant
* Small form Factor
* UART to USB adapter provided
* Lightweight (< 2 oz.)

DGS-Ethanol 968-035 Digital Breath Alcohol Sensor Module APPLICATIONS
* Breathalyzer
* Breath Alcohol Detector

DGS-Ethanol 968-035 Digital Breath Alcohol Sensor Module MEASUREMENT PERFORMANCE CHARACTERISTICS
Based on Standard Conditions 25 degree C, 50% RH and 1 atm
* Measurement Range: 0 to 800 ppm
* Resolution: 0.3 ppm
* Measurement Accuracy: 15% of reading
* Measurement Repeatability: < ± 3% of reading
* T90 Response Time (100 ppm step): < 60 seconds
* Power Consumption:
1 mW for 1 minute triggered samples
12 mW for continuous sampling 5, 10 30, 60 second intervals
* Expected Operating Life: > 5 years (10 years @ 25± 10C; 60 ± 30% RH)
* Operating Temperature Range: -20 to 40 degree C (-30 to 55 degree C intermittent)
* Operating Humidity Range: 15 to 95% (0 to 100% non-condensing intermittent)
* Mechanical Dimensions: 1.75 x 0.82 x 0.35 in. (44.5 x 20.8 x 8.9 mm)
* Weight: < 2 Ounces

ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module DESCRIPTION
Quickly integrate Ozone sensing into your system with very low power consumption and a simple analog sensor signal output.

The ULPSM converts the Ozone sensor??s linear current signal output to a linear voltage signal, while maintaining the sensor at its ideal biased operation settings.

ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module BENEFITS
* 0 to 3 V Analog Signal Output
* Low Power Consumption < 45 uW
* Fast Response
* On-board Temperature Sensor
* Easy Sensor Replacement
* Standard 8-pin connector

ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module APPLICATIONS
* Fixed Industrial Safety Monitoring
* Portable Industrial Safety Monitoring
* Portable Personal Safety Monitor
* Indoor Air Quality Monitoring
* Outdoor Air Quality Monitoring
* Air Purification Control

ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module PERFORMANCE CHARACTERISTICS
* Measurement Range: 0 to 20 ppm
* Lower Detection Limit: 0.3 ppm
* Resolution: 0.15 ppm
* Accuracy: < ± 2 % of reading
* Response Time T90: < 30 seconds
* Power-On Stabilization Time: 60 minutes recommended

LLE Series Liquid Level Sensors Description
The enhanced series of liquid level sensors incorporates a photo-transistor trigger which provides a digital output that denotes the presence or absence of liquid.

The mode of operation is derived from the principle of total internal reflection. An LED and photo-transistor are housed within a plastic dome at the head of the device. When no liquid is present, light from the LED is internally reflected from the dome to the photo-transistor. When liquid covers the dome, the effective refractive index at the dome-liquid boundary changes, allowing some light from the LED to escape. Thus the amount of light received by the photo- transistor is reduced and the output switches, indicating the presence of liquid. This method of liquid level sensing is very fast, and almost instantaneous for water.

LLE Series Liquid Level Sensors Features
* Solid state technology
* Small size
* Digital output
* Pre-wired
* Electrically robust

LLE Series Liquid Level Sensors Benefits
* Accurate, repeatable switching point
* Can be mounted in applications where space is limited
* Microprocessor compatible
* Easy to install, saving assembly time
* Reverse polarity, over voltage, short circuit and transient protection

LLE Series Liquid Level Sensors Typical Applications
* Home appliances
* Spa baths
* Vending machines
* Food and beverage
* Medical
* Compressors
* Machine tools
* Automotive

LLE Series Liquid Level Sensors Technical Specifications
* Repeatability: ±1mm
* Hysteresis: 2mm (dependent on liquid)
* Material: Polysulphone
* Operating temperature: -40 to 125'C (-40 to 257'F)
* Storage temperature: -40 to 125'C (-40 to 257'F)
* Supply voltage: 5 Vdc to 12 Vdc
* Supply current: 5 mA nominal @ +5 Vdc

IRC-AT Infrared Carbon Dioxide (CO2) Sensor Description
Alphasense CO2 and Methane infrared sensors are supplied in the industry standard miniature (20mm diameter) gas sensor housing.

Patented optics give the best signal to noise ratio of any 20mm diameter NDIR and universal linearisation constants allow easy implementation.

The on-board temperature sensor allows for software compensation, including ideal gas law correction.

CO2
The IRC-AT with dual channel thermopile detector. This CO2 sensor is designed for IAQ, safety, combustion and high CO2 process control applications.

Application notes explain linearisation, temperature compensation and circuitry.

The IRC-AT cover the entire concentration range of measurement, simply implement the appropriate linearisation constants in software for your required range:
IAQ: 0 to 5,000ppm CO2
Safety: 0 to 5% CO2
Combustion: 0 to 20% CO2
Process control: 0 to 100% CO2

* IAQ Range: 0 to 5000ppm
* Temperature Signal : Integral thermistor
* Response Time (t90): < 40 s @ 20'C ambient
* MTBF: > 5 years
* Operating Temperature Range: -20 to +50'C
* Storage Temperature Range: -40 to +75'C
* Humidity Range: 0 to 95% rh non-condensing

TCS3000/3020 Series Toroidal Conductivity Sensors Features
* Resists coating, corrosion and fouling
* Durable Noryl construction
* Easy installation
* Custom tee for in-line mounting
* Connects to Sensorex TCSMA, TCSTX, Rosemount or Foxboro Instrumentation

TCS3000/3020 Series Toroidal Conductivity Sensors Description
The Sensorex TCS series toroidal inductive conductivity sensors features a wide measurement range and dependable toroidal technology over the range 0-2000. Resistant to corrosion, coatings and fouling common to contacting conductivity sensors, the TCS series is designed for a trouble free and long service life.

Noryl is the standard material of construction and has a wide solvent tolerance and temperature stability to 105 degrees C***. optional PeeK models will be available in the future. all models can be submersed by utilizing the 3/4" MnPT threads on the sensor or installed in 2" nPT tees for in-line deployment. aTC element is user specified and built into the TCS sensor. all TCS sensor models are suppplied with 20ft long 9-conductor cable. Custom lengths are available. Please contact Sensorex for pricing.

Choose the TCS3020 for use with a Sensorex TCSMa or TCSTX toroidal transmitter. TCS3000 sensors can be connected to many toroidal controllers and transmitter manufactured by rosemount, Foxboro or others.

TCS3000/3020 Series Toroidal Conductivity Sensors Specifications
* Measuring Range: TCS3020 and TCS3000 - 0 to 2,000,000 uS/cm
* Body Material: Noryl
* Max Temperature: 105 Degrees C
* Max Pressure: 150 psig
* Cable Length: 20 feet, 6 conductor plus shields
* Resists coating, corrosion and fouling
* Durable Noryl construction

MB7480 4-20HR-MaxSonar-WRI
High Performance Ultrasonic Precision Rangefinder

MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Product Description
The weather resistant 4-20HR-MaxSonar-WR is a rugged, ultrasonic sensor component module that features the industry standard 4-20mA analog current interface. This outdoor sensor provides very short- to long- distance detection and ranging in a compact, robust PVC housing. This ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings.

High-output, acoustic power, combined with continuously variable gain, realâ??time background automatic calibration, realâ??time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The 4-20HR-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones.

The MB7480 4-20HR-MaxSonar-WR sensor has an inverted 4-20mA signal where 20mA signifies that the sensor is reporting the minimum reported distance and 4mA signifies the maximum reported distance for the sensor.

MB7360 is the non 4-20mA version of this sensor line.
MB7389 is the most likely version of this sensor.

Models with additional chemical resistance are available

The F-Option (IP-68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP-68) when ordering.

MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Product Specifications
* Resolution of ~1.6mm
* Analog current output of 4-20mA
* 7.5Hz read rate
* 42kHz ultrasonic sensor measures distance to objects
* RoHS compliant
* Operates from 10V-32VDC
* Operational temperature -40'C to +65'C (-40'F to +149'F)
* Maximum Range of 5-meters (196 inches)

MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Features & Benefits
* Factory calibrated beam pattern
* Functions well in high noise environments
* Stable and highly reliable range readings
* Excellent noise and clutter rejection
* High acoustic sensitivity
* Low current draw
* High quality, low cost
* Minimal sensor-to-sensor variability

MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Applications & Uses
* Automated process control systems
* Weather station monitoring
* Bin level measurement
* Proximity zone detection
* Environments with acoustic and electric noise
* Height monitors
* Auto sizing
* Box dimensions
* People detection
* Robot ranging

IRt/c.01HB Infrared Temperature Sensors Features:
* Infrared Thermocouple IRt/c
* Non-contact
* Self-powered
* Intrinsically Safe
* Repeatability 0.02° F (0.01'C)
* Interchangeability ±1%
* Resolution approx. 0.0001'C
* Small Size

IRt/c.01HB Infrared Temperature Sensors Technical Data
* Sensing Range: -50 to 550'F (-45 to 290'C)
* Ambient Temperature: 0 to 160'F (-18 to 70'C)
* Field of View: approximately 1:1 (60')
* Repeatability 0.02' F (0.01'C)
* Interchangeability ±1%
* Resolution approx. 0.0001'C
* Minimum Spot Size: .3'(8mm)
* Spectral Response: 6.5 to 14µm
* Output Impedance: 3 Kohms approx
* Response Time: 100 Milliseconds

H2S-A1 Hydrogen Sulfide Sensor H2S Sensor Description
Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology.

H2S-A1 Hydrogen Sulfide Sensor size:
20mm diameter, the industry standard size for portable gas detectors

With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S.

H2S-A1 Hydrogen Sulfide Sensor H2S Sensor Specification
* Range: 100ppm H2S limit of performance warranty
* Sensitivity: 550 to 875 nA/ppm in 20ppm H2S
* Response time t90: < 35s from zero to 20ppm H2S
* Resolution: < 0.05 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6 g

Matched Transmitter board for H2S-A1 H2S Sensor
4-20 mA Digital Transmitter Board
* Factory calibration, custom-set for immediate use
* Digital zero, sensitivity and temperature compensation
* Digital and 4-20mA output
* Biased or unbiased operation
* Calibration and range change

WQ401 Dissolved Oxygen Sensor Description
WQ401 Dissolved Oxygen Sensor is a rugged and reliable water oxygen measuring device. The WQ401's sensor is attached to 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The sensor's output is 4-20 mA with a three wire configuration. The sensor's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. The unit uses a removable shield and dissolved oxygen element for easy maintenance.

WQ401 Dissolved Oxygen Sensor Features
* Measure dissolved oxygen in situ
* Fully encapsulated electronics
* 4-20 mA output
* Marine grade cable with strain relief
* Stainless steel housing
* Replaceable dissolved oxygen element

WQ401 Dissolved Oxygen Sensor Applications
Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications.

WQ401 Dissolved Oxygen Sensor Specifications
* Output: 4-20 mA
* Range: 0 to 100% saturation, 0 to 8 ppm, temperature compensated to 77'F (25'C)
* Accuracy: ±0.5% full scale
* Maximum Pressure: 40 psi
* Operating Voltage: 10 to 36 VDC
* Current Draw: 15.5 mA plus sensor output
* Warm-up Time: 10 seconds minimum
* Operating Temperature: -40 to +131'F (-40 to +55'C)

OPC-N3 PM2.5 Particle Sensor

* PM1 , PM2.5 and PM10
* Reduced power standby mode
* Capability to measure up to 2,000 µ g/m 3
* Onboard temperature and humidity sensor
* SPI interface not included, order code 000-0SPI-00

OPC-N3 PM2.5 Particle Sensor Specifications
* Particle range: 0.38 to 40 Spherical equivalent size
* Size categorisation: 24 Number of software bins
* Total flow rate (typical): 1.2 L/min
* Sample flow rate (typical): 220 mL/min
* Voltage range: 4.8 to 5.2 VDC
* Temperature range: -10 to 50'C
* Humidity range: 0 to 95 % rh non-condensing
* Weight: < 105g

DL0001 Laser Dust Sensor Introduction
The Laser Dust Sensor is used to measure the concentration of suspended particles in the air with different sizes (including PM2.5). It uses a laser diode as the light source to illuminate the sampling air boosted by the blower. When the small particles in the air enter the illuminated area, the laser beam is scattered. The scattered light is received by a photodetector and converted into current signal which is amplified and processed then to indicate the concentration of particles. A built-in microprocessor converts it into mass concentration (μg/m3) and outputs the signal via universal digital interface.

DL0001 Laser Dust Sensor Features
* Lensless design to ensure good consistency
* High accuracy measurement
* Can detect particles as small as 0.3μm in diameter

DL0001 Laser Dust Sensor Applications
* Ventilation system
* Air purifier
* Air quality monitor
* Automotive air purification
* Air conditioner
* Other home appliances

DL0001 Laser Dust Sensor Technical Parameters
* Measuring range of particles: 0.3~1.0; 1.0~2.5; 2.5~10 μm
* Effective range of particle mass concentration: 0~500 μg/m3
* Maximum range of particle mass concentration: 999 μg/m3
* Resolution: 1 μg/m3
* Single measurement response time: 1s
* Total response time: 10s
* DC power supply voltage: 5.0 V
* Working current: 100 mA

H2S-AE Hydrogen Sulfide Sensor (H2S Sensor) Description
Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology.

H2S-AE Hydrogen Sulfide Sensor size:
20mm diameter, the industry standard size for portable gas detectors

With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S.

H2S-AE Hydrogen Sulfide Sensor (H2S Sensor) Specifications
* Range: 2,000 ppm H2S limit of performance warranty
* Sensitivity: 65 to 110 nA/ppm in 400ppm H2S
* Response time t90: < 25 (s) from zero to 400ppm H2S
* Resolution: < 0.5 RMS noise (ppm equivalent)
* Temperature range: -30 to 50 'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6g

CO-BM Carbon Monoxide Sensor (CO Sensor) Description
Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology.

CO-BM Carbon Monoxide Sensor sizes:
32mm diameter package, the best choice for fixed site applications

The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology.

CO-BM Carbon Monoxide Sensor (CO Sensor) Specifications
* Range: 5,000 ppm limit of performance warranty
* Sensitivity: 80 to 130 nA/ppm in 400ppm CO
* Response time (t90): < 25 (s) from zero to 400ppm CO
* Resolution: < 0.5 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range:80 to 120KPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 13g

MB7066 XL-MaxSonar-WRL1
High Performance Ultrasonic Precision Rangefinder

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Description
The XL-MaxSonar-WRL1 is our longest range (10m) outdoor sensor.

The weather resistant XL-MaxSonar-WR is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings.

High output acoustic power combined with continuously variable gain, real-time background automatic calibration, realâ??time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Specifications
* Resolution of 1 cm
* 10Hz read rate
* 42kHz Ultrasonic sensor measures distance to objects
* RoHS Compliant
* Read from all 3 select sensor outputs: Analog Voltage, Serial, Pulse Width
* Operates from 3.0-5.5V
* Low 3.4mA average current requirement
* Small, light weight module
* Designed for easy integration into your project or product
* Operational Temperature from -40'C to +70'C (-40'F to +160'F)
* Real-time automatic calibration (voltage, humidity, ambient noise)
* Firmware filtering for better noise tolerance and clutter rejection
* 200,000+ Hours Mean Time Between Failure
* Weather Resistant (IP67), optional Chemical Resistant F-Option
* Matches standard electrical 3/4-inch PVC pipe fittings for easy mounting (3/4â?³ National Pipe Thread Straight)
* Our longest range outdoor, weather resistant, ultrasonic sensor
* Maximum range of 1068 cm (450 inches)
* Long range, narrow detection zone

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Features and Benefits
* Extended 10 meter range detection and outputs
* High acoustic power output
* Readings can occur up to every 100ms, 10-Hz rate
* Triggered operation provides the range reading as desired
* Fast measurement cycle
* Quality narrow beam characteristics
* Low cost, long range IP67 sensor

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Applications and Uses
* Robot ranging sensor
* Autonomous navigation
* Distance measuring
* Long range object detection
* Industrial sensor

NAP-57A Catalytic Type Gas Sensor Description
NAP-57A is a newly developed catalytic type gas sensor based on conventional type NAP-56A for not only residential but also commercial or semi-industrial applications because of having highly excellent poisoning resistivity. Since its power consumption and pin positions are completely the same as NAP-55A and 56A, it is easily replaceable as it is. However, it does not possess the explosion proof by itself, then it is recommended to install it into an explosion proof chamber for actual application.

NAP-57A Catalytic Type Gas Sensor Features
* Good stability
* Excellent repeatability and detection accuracy
* Good linearity against gas concentration at wide range
* Quite excellent poisoning resistivity
* Down sizing for design flexibility of gas alarm or detector

NAP-57A Catalytic Type Gas Sensor Usage
* Gas alarm or detector of general combustible gases for all applications
* Gas densitometer
* Driving module for gas leakage detector

NO-B1 Nitric Oxide Sensor (NO Sensor) Description
Alphasense Nitric Oxide gas sensors operate using proven fuel cell technology.

NO-B1 Nitric Oxide Sensor size:
32mm diameter package, the best choice for fixed site applications

The NO range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 200 parts per billion (ppb) whilst giving linear outputs to as high as 250ppm. The sensors are suitable for inclusion in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers.

Alphasense NO sensors provide a significant improvement in stability of response to transient relative humidity changes.

The NO sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.

NO-B1 Nitric Oxide Sensor (NO Sensor) Specification
* Range: 250ppm NO limit of performance warranty
* Sensitivity: 400 to 620nA/ppm in 50ppm NO
* Resolution: < 0.15 RMS noise (ppm equivalent)
* Response time t90: < 30s from zero to 50ppm NO
* Temperature range: -30 to 50 deg C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 13g

LLT600D3SH Liquid Level Switches General Description
Optomax Digital liquid level switches are ideal for applications with restricted space that require a miniature, low power and low cost sensing solution.

The microcontroller based sensor is solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid.

Available in two chemically resistant housing materials, Polysulfone, the standard choice for most applications or Trogamid, which is typically used in food and beverage applications.

LLT600D3SH Liquid Level Switches Features
* Liquid level switches that can detect almost any liquid type; oil or water based
* Choice of material; Trogamid
* Choice of threads and terminal connections

LLT600D3SH Liquid Level Switches Benefits
* Low power
* Low cost
* Compact design

LLT600D3SH Liquid Level Switches Technical Specifications
* Supply voltage: 4.5V DC to 15.4V DC
* Supply current: 2.5mA max. (Vs = 15.4V DC)
* Output sink and source current: 100mA
* Operating temperatures: -25'C to +80'C
* Storage temperatures: -30'C to +85'C
* Housing material: Trogamid®
* Housing Type: 1/2" SAE

NO2-B43F Nitrogen Dioxide Sensor (NO2 Sensor) Description
Alphasense Nitrogen Dioxide gas sensors operate using proven fuel cell technology.

Sensors are available in the following sizes:
32mm diameter package, the best choice for fixed site applications

The NO2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 50 parts per billion (ppb) and an operating range to 20ppm. The sensors are suitable for use in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers.

The NO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.

* Range: 20 ppm NO 2 limit of performance warranty
* Sensitivity: -175 to -450 nA/ppm at 2ppm NO2
* Response time: < 60 t90 (s) from zero to 2ppm NO2
* Temperature range: -30 to 40'C
* Pressure range: 80 to 120kPa
* Humidity range: 15 to 85 % rh continuous
* Weight: < 13 g

OPC-N2 Alphasense PM2.5 Particle Sensor Description
Alphasense is dedicated to supplying sensors for air quality networks. Increased awareness of the health danger from particulates has raised significantly the importance of monitoring PM. Our Optical Particle Monitor OPC-N2 measures PM1, PM2.5 and PM10, augmenting our range of gas and VOC sensors for indoor and urban air quality monitoring.

The OPC-N2 originated from research at the Centre for Atmospheric and Instrumentation Research, University of Hertfordshire and has subsequently been developed and refined with five years of Alphasense and UoH collaboration, including the capture of more than 150 million readings at Heathrow airport.

The OPC-N2 measures particles from 0.38 micron to 17 micron diameter accurately, repeatedly, and with minimal maintenance using the patented pump-less design. A proven technology, the OPC-N2 provides both PM readings and real time particle size histograms, competing in performance with existing analytical units but at a fraction of the cost.

* Particle range: 0.38 to 17 Spherical equivalent size (based on RI of 1.5)
* Temperature range: -10 to 50'C
* Humidity range: 0 to 99 % rh (continuous) (non-condensing)
* Weight : < 105 g

CO-AF Carbon Monoxide Sensor (CO Sensor) Description
Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology.

CO-AF Carbon Monoxide Sensor (CO Sensor) sizes:
20mm diameter, the industry standard size for portable gas detectors

The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology.

CO-AF Carbon Monoxide Sensor (CO Sensor) Specifications
* 20mm diameter
* Sensitivity: 55 to 90nA/ppm in 400ppm CO
* Response time t90: < 25s from zero to 400ppm CO
* Resolution: < 0.5 RMS noise (ppm equivalent)
* Range: 5,000ppm CO limit of performance warranty
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120kPa
* Humidity range: 15 to 90% rh continuous

Matched Transmitter board for CO-AF CO Sensor
4-20 mA Digital Transmitter Board
* Factory calibration, custom-set for immediate use
* Digital zero, sensitivity and temperature compensation
* Digital and 4-20mA output
* Biased or unbiased operation
* Calibration and range change

MTCS2601 silicon sensing die in SMD ceramic package

The MTCS2601 sensors consist of a micro-machined thermal conductivity sensor using four Ni-Pt resistors realized using MEMS technologies. The sensor is mounted in a miniature SMD package, available on tape and real. This MEMS TC sensor, combined with simple low power CMOS standard integrated circuits, is an excellent choice for size-critical leakage OEM detector or miniature vacuum gauge based on Pirani principle requiring ultra-low power consumption, long lifetime and no maintenance. Applications are primary pressure control in rough environment with power and size constraints, or detection in closed volume of gas leakage or moisture, or intrusion.

MTCS2601 Thermal Conductivity Sensor Applications
* Primary vacuum control following Pirani principle. This sensor is easily added within a pressure valve or directly in vacuum pipes or systems, such as small mechanical pumping systems, vacuum pumping machine and analytical instruments .
* Leakage miniature SMD sensor as control integrity of closed systems or instruments under dedicated pressure, able to detect defect like corrosion or simply box opening (load cells; flywheel systems, Dewarâ?¦)

MTCS2601 Thermal Conductivity Sensor Features
* Thermal conductivity sensor for primary vacuum measurement
* Silicon device in SMD ceramic package. Delivery in Tape & Reel
* Small dimension compatible with measurement in very small volume
* Low power consumption and short time constants
* Optimal sensitivity in the range 10^(-2) to 10^(+2) mbar. Possible extension in the range 10^(-4) to Patm
* Low cost for volume application
* Robust MEMS sensor following physical Pirani principle (hot wire) with no chemical reaction, based on gas thermal conductivity variation versus pressure
* Measuring range from 10^(-4) to 1000 mbar with excellent reproducibility
* Temperature compensated with excellent matching of compensation and heating resistors on the same silicon die
* Ultra small sensor gas volume such as < 0.1 cm^3
* Robust and long MTBF (> 30â??000 hs) due to physical resistive sensing principles
* Ultra-low power sensor consumption in operation (< 6 mW) due to the use of MEMS based micromachined silicon sensor with small heated mass.
* Ultra-fast response time < 50 ms
* Insensitive to mounting position
* Gold contact version upon request for corrosive gas environment
* Compatible with a simple constant excess temperature operation circuit

WQ600 ORP Sensor Description
WQ600 (Redox) ORP Sensor is a rugged and reliable ORP/Redox measuring device. The sensor is molded to 25' of marine grade cable, with lengths up to 500' available upon request. The WQ600's output is 4-20 mA with a three wire configuration. The unit's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing.

WQ600 ORP Sensor Features
* Continuous ORP monitoring
* Fully encapsulated electronics
* 4-20 mA output
* Marine grade cable with strain relief
* Stainless steel housing

WQ600 ORP Sensor Applications
Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications.

WQ600 ORP Sensor Specifications
* Output: 4-20 mA
* Range: -500 to +500 mV
* Accuracy: 2% full scale
* Maximum Pressure: 40 psi
* Operating Voltage: 10 to 36 VDC
* Current Draw: 0.2 mA plus sensor output
* Warm-up Time: 3 seconds minimum
* Operating Temperature: -40 to +55'C

Electrochemical Sensing Module
Chlorine (HOCl, HOBr or ClO2 ) & Temperature

KAPTA 2000-AC2 In-line Chlorine Sensors General description
The KAPTA 2000-AC2 probe has been specifically developed to measure free chlorine (HOCl) and temperature directly within a pressurised pipe for many applications including management and control of a drinking water network, real-time, rapid control of chemical dosing for industrial water processes and cleaning regimes and management of chlorine levels within swimming pools and spas.

The KAPTA 2000-AC2 is an amperometric sensor using a structured photo-polymerised membrane directly on the electrode which suppresses the well-known drawbacks of amperometric sensors with electrolyte, such as pressure and flow sensitivity, and enables the probe to be installed directly within pipes up to 10 bar flow pressure without flow or pressure control.

The sensor principal also eliminates the need for field re-calibration and on-going routine membrane replacement allowing both long-term stability of the signal and reduced maintenance costs. The principal of the measurement is based on a Clark-type cell with a working, counter and reference electrode.

The sensor design includes a simple replaceable head which is easy to handle and requires no reagent or electrolyte. As the lifetime of the sensor can vary with the application, this design allows more flexibility and price improvement for critical applications.

KAPTA 2000-AC2 In-line Chlorine Sensors Benefits
* Real-time water network monitoring
* No on-going membrane / electrolyte maintenance
* Chemical free operation

KAPTA 2000-AC2 In-line Chlorine Sensors Main features
* Amperometric sensor
* Measurement of the main disinfection species: HOCl, HOBr or ClO2
* User replaceable sensing head
* Inline monitoring at up to 10 bar pressure
* Easy conditioning
* > 1 year shelf life

KAPTA 2000-AC2 In-line Chlorine Sensors Typical applications
* Water quality control
* Drinking water security
* Industrial process control
* Chemical dosing measurement and control
* RO membrane security
* Swimming pool water quality
* Cooling towers
* Fish farming

Ee893 digital co2 sensor module for oem applications

The e+e co2 module ee893 is designed for oem applications and for demanding environment. A multiple point co2 and temperature adjustment procedure leads to excellent co2 measurement accuracy over the entire temperature working range; this is a must for process control and outdoor applications.

The e+e dual wavelength ndir co2 sensing procedure compensates automatically for ageing effects. Ee893 is highly insensitive to pollution and offers outstanding long term stability.

With its small dimensions and electrical connection via contact pins and pads, ee893 is the optimal choice for oem devices such as wireless transmitters, hand-helds or data loggers. The measured data, with a range of up to 10000ppm, is available on the e2 digital interface.

An optional kit facilitates easy configuration and adjustment of the module. The measurement interval can be set according to the application requirements; by this the average current consumption can be reduced to less than 60î¼a for battery-operated devices.

Ee893 digital ndir co2 sensor module typical applications
* data loggers
* hand helds
* wireless transmitters
* building management
* demand controlled ventilation

Ee893 digital co2 sensor module key features
* autocalibration
* outstanding long-term stability
* temperature compensation
* low power consumption
* very small size

Ee893 digital ndir co2 sensor module technical data
* co2 working range: 0 - 2000 / 5000 / 10000ppm
* supply voltage: 4.75 - 7.5v dc
* average power consumption: 58âµa ~ 3.7ma
* calibration interval: >5 years
* operation temperature: -40~60'c (-40~140'f)
* operation humidityâ??: 0~95% rh (not condensating)
* operation pressure: 85~110kpa (12.33 ~ 15.95psi)

TD40 Wireless Particle Monitor Overview
The TD40 is a sensitive and concise airborne particle measurement sensor. This unit is well suited to carrying out precise measurements of particle densities in clean and dust free facilities. The unit acquires the current particle concentration in the environment though it's internal air circulation system and particle concentrations at precise diameter intervals are calculated based on the scattering of a laser source. The measurement of concentrations of particles within specific diameter intervals is performed using advanced digital signal processing electronics.

TD40 Wireless Particle Monitor Typical Applications
* Monitoring of dust sensitive manufacturing environments
* Food production and packaging facilities monitoring
* Healthcare environment monitoring
* Office and factory indoor air quality monitoring

TD40 Wireless Particle Monitor Features
* Particle Sensor: 16 Particle Bin sensor that counts particles in the range of 0.38µm to 17µm
* Temperature Sensor: Important measure for a controlled environment
* Wireless: Enables you to connect multiple sensors
* Alert: Get real-time alerts when the values go outside set limits
* Humidity Sensor: Measures the relative humidity in the room
* Easy Set-up: Plug and Play Technology will have the sensor running in minutes

NH3-A1 Ammonia Sensor NH3 Sensor Description
Alphasense is expanding its line of electrochemical toxic gas sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.

Ammonia (NH3)
Our first family of Ammonia sensors. This sensor is designed for higher concentrations of Ammonia. Sensors for lower level detection are in development.

NH3-A1 Ammonia Sensor NH3 Sensor Specifications
* Range: 200 ppm NH3 limit of performance warranty
* Sensitivity: 17 to 27 nA/ppm in 50ppm NH3
* Response time t90:

3SP_O3_5 P
15x15 O3 Sensor 5 ppm Pinned Package 110-406

3SP_O3_5 P Ozone Sensor O3 Sensor Description
SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.

3SP_O3_5 P Ozone Sensor O3 Sensor Benefits
* Small Size with Low Profile (20x20x3 mm)
* Long Life (10 years expected life)
* Fast Response (< 15 seconds)
* Low Power Consumption
* Individually Calibrated (NIST Traceable)
* ROHS Compliant
* Improved stability and ppb performance

3SP_O3_5 P Ozone Sensor O3 Sensor Applications
* Air Quality Monitoring
* Industrial Safety
* Air Purification Control

3SP_O3_5 P Ozone Sensor O3 Sensor Specifications
* Measurement Range: 0 to 5 ppm
* Lower Detection Limit: < 20 ppb
* Resolution: < 20 ppb
* Response Time: < 15 seconds typical
* Sensitivity @ 5ppm: -60 +/- 10 nA/ppm
* Operating Temperature: -30 to 50'C
* Operating Humidity: 0 to 100% RH non-condensin
* Power Consumption: 10 to 50 uW

ETO-A1 Ethylene Oxide Sensor ETO Sensor Description
Alphasense is expanding its line of Electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.

Ethylene Oxide (C2H4O)
The ETO is a general purpose sensor, primarily developed for monitoring Ethylene Oxide but also capable of measuring other volatile organic compounds (VOCs). Our toxic evaluation board allows easy adjustment of the bias voltage to optimise this sensor for the required application.
See application note AAN113.
Available in A and B series

ETO-A1 Ethylene Oxide Sensor ETO Sensor Specifications
* Range: 100 ppm EtO limit of performance warranty
* Sensitivity: 2000 to 3200 nA/ppm in 20ppm EtO
* Response time t90: < 150s from zero to 20ppm EtO
* Resolution: < 0.1 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120kPa
* Humidity range: 15 to 90% rh continuous
* Weight: < 6 g

RESP_IRR_20 P
15x15 Respiratory Irritant Sensor 20 ppm P Package 110-901

RESP_IRR_20 P Respiratory Irritant Sensor Description
RESP_IRR_20 is a Screen Printed ElectroChemical sensor component specifically designed for the broad detection of respiratory irritant gases: NO2, Ozone, Chlorines, SO2, H2S and odorous gases.

RESP_IRR_20 P Respiratory Irritant Sensor Benefits
* Zero Power Sensor
Sensor Circuit - < 10 uW max
* Sensitive - In the ppb range
* Cold operation - No Heating required
* Stable Response - Not affected by humidity, CO2, N2, Ar, most saturated hydrocarbons, hexane, ammonia,
* Small Size& Low Profile - 20 x 20 x 3 mm
* Easy to Use - Linear Response
* Long Life - 10 years expected life
* Fast Response - < 60 seconds
* ROHS Compliant

RESP_IRR_20 P Respiratory Irritant Sensor Applications
* Bad Air Quality Detection
* Indoor Air Monitor
* Air Purifier Controls
* Weather Stations
* Internet of Things
* Smart Homes
* Leak Detection
* HVAC Ventilation Control
* Telemedicine Equipment

RESP_IRR_20 P Respiratory Irritant Sensor Specifications
* Measurement Range: 0 to 20 ppm
* Response Time to 90%: < 60 seconds typical
* Sensitivity: -50 +/- 25 nA/ppm
* Long Life: 10 years expected life
* Fast Response: < 60 seconds
* Operating Temperature: -10 to 40 deg C
* Operating Humidity: 0 to 100% RH non-condensing

NH3 3E 100 Ammonia Sensor (NH3 Sensor) FEATURES
* Amperometric 3 electrode sensor cell
* Fixed organic gel electrolyte
* No CO2 interference
* 0 volt bias operation

NH3 3E 100 Ammonia Sensor (NH3 Sensor) TYPICAL APPLICATIONS
* TLV-monitoring, leakage detection
* Fixed point applications in cold storages & refrigeration plants only
* For other applications please use NH3 3E SE versions
* No background concentrations of ammonia & alcohols

NH3 3E 100 Ammonia Sensor (NH3 Sensor) TECHNICAL SPECIFICATIONS
* Measuring Range: 0-100 ppm
* Sensitivity Range: 90 nA/ppm ± 40 nA/ppm
* Zero Current at 20 deg C: < ± 150 nA
* Resolution at 20 deg C: < 2 ppm
* Bias Potential: 0 mV
* Linearity:

TF-LP01 Laser Particle Sensor Description
TF-LP01 type laser particle sensor is a small module for detection of particles in the air with scattering principle. It features compact size, high accuracy, repeatablity and consistency, and strong resistance against interference. It adopts ultra-silent fan, and is able to response in real-time and collect data continuously. The sensors are 100% tested and calibrated in factory.

TF-LP01 Laser Particle Sensor Features
* High accuracy
* Fast response
* Compact in size

TF-LP01 Laser Particle Sensor Applications
* Air purifier, portable air quality detector, smart home, etc.

TF-LP01 Laser Particle Sensor Technical index
* Distinguishable particle: PM1.0, PM2.5, PM10
* Measurement range: 0~999 ug/m3
* Mass concentration resolution: 1 ug/m3
* Response time:

AM2322 Temperature and Humidity Sensor Product Overview
AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance.

AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand.

AM2322 Temperature and Humidity Sensor Product Features
* Super Mini Size Easy Portable
* Ultra-low voltage work
* Ultra-Low Power State
* Excellent long-term stability
* Standard And single bus output

AM2322 Temperature and Humidity Sensor Range of application
Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control.

AM2322 Temperature and Humidity Sensor Product highlights
Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose.

AM2322 Temperature and Humidity Sensor Sensor performance
* Humidity range: 0~99.9%RH
* Temperature range: -40 ~ +80'C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy: ±0.3'C
* Humidity Repeatability: ±0.1%RH
* Temperature Repeatability: ±0.2'C
* Service voltage: 3.1V to 5.5V
* Output signal: single bus /IIC signal

UV Sensor "UV-Arc"
water proof UV sensor with G3/4" thread for pantograph arc detection

Properties of Waterproof UV Sensor UV-Arc
The UV-Arc is a waterproof sensor with a male threaded body (G3/4") to be used on trains to measure intensity and length of pantograph arcs according to EN 50317. This indicates the quality of the contact between a pantograph and the contact wire and allow a location of defects at the wire within a rail network. The UV-Arc sensor is configured for this special application. It contains a very sensitive photodiode with an additional fi lter to suppress solar UVB sensitivity. The time constant is adjusted to the typical arc lengths and the metal housing provides high EMC safety.

UV-Arc Waterproof UV Sensor Specifications
* Temperature Coefficient (30 to 65'C): 0.05 to 0.075%/K
* Operating Temperature: -20 to +80'C
* Storage Temperature: -40 to +80'C
* Humidity: < 80%, non condensing
* Spectral Sensitivity: UVC+
* Measuring Range: up to 400 µW/cm2
* Signal Output: 0 to 5 V or 4 to 20 mA

IRt/c.01HB Infrared Temperature Sensors Features:
* Infrared Thermocouple IRt/c
* Non-contact
* Self-powered
* Intrinsically Safe
* Repeatability 0.02° F (0.01'C)
* Interchangeability ±1%
* Resolution approx. 0.0001'C
* Small Size

IRt/c.01HB Infrared Temperature Sensors Technical Data
* Sensing Range: -50 to 550'F (-45 to 290'C)
* Ambient Temperature: 0 to 160'F (-18 to 70'C)
* Field of View: approximately 1:1 (60')
* Repeatability 0.02° F (0.01'C)
* Interchangeability ±1%
* Resolution approx. 0.0001'C
* Minimum Spot Size: .3'(8mm)
* Spectral Response: 6.5 to 14µm
* Output Impedance: 3 Kohms approx
* Response Time: 100 Milliseconds

OPTOD Optical Dissolved Oxygen & Temperature Sensor Optical technology:
The OPTOD sensor is based on luminescent optical technology and is approved by the ASTM International Standard Method D888-05.

Without calibration requirements, and thanks to an ultra low power technology, the OPTOD sensor is suitable for field work as well as long and short term monitoring.

With no oxygen consumption, this technology gives an accurate measure in all situations, even in very low oxygen concentrations.

Digital Technology:
The "smart" OPTOD sensor stores calibration and history data within the sensor. This allows you a "plug and play" system without re-calibration.

Digitally optimised measurement technology
* Optical luminescence technology requires minimal maintenance
* Digital sensor: Modbus RS-485
* No calibration required and therefore little to no drift occurs
* Robust and Watertight

OPTOD Optical Dissolved Oxygen & Temperature Sensor Applications
* Industrial effluent treatment
* Urban waste water treatment
* Surface water monitoring
* Drinking water

OPTOD Optical Dissolved Oxygen & Temperature Sensor Specifications
* Measurement ranges: 0.00 to 20.00 mg/L
* Resolution: 0,01
* Accuracy: +/- 0.1mg/L, +/- 0.1 ppm, +/- 1 %
* Response time: 90% of the value in less than 60 seconds
* Temperature compensation: Via CTN
* Operating temperature: -10°C to +60'C
* Signal interface: Modbus RS-485 (standard) and SDI-12 (option)
* Sensor power-supply: 5 to 12 volts

AM2322 Temperature and Humidity Sensor Product Overview
AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance.

AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand.

AM2322 Temperature and Humidity Sensor Product Features
* Super Mini Size Easy Protable
* Ultra-low voltage work
* Ultra-Low Power State
* Excellent long-term stability
* Standard And single bus output

AM2322 Temperature and Humidity Sensor Range of application
Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control.

AM2322 Temperature and Humidity Sensor Product highlights
Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose.

AM2322 Temperature and Humidity Sensor Sensor performance
* Humidity range: 0~99.9%RH
* Temperature range: -40 ~ +80'C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy: ±0.3'C
* Humidity Repeatability: ±0.1%RH
* Temperature Repeatability: ±0.2'C
* Service voltage: 3.1V to 5.5V
* Output signal: single bus /IIC signal

CM-01B Contact Microphone Specifications
* High Sensitivity
* Robust
* Low Noise
* Piezo Film Technology
* Shielded Cable

CM-01B Contact Microphone Description
The CM-01B contact microphone uses sensitive but robust PVDF piezo film combined with a low-noise electronic preamplifier to provide a unique sound or vibration pick-up with buffered output. The design minimizes external acoustic noise while offering extremely high sensitivity to vibration applied to the central rubber pad. The CM-01B is ideal for detecting body sounds.

CM-01B Contact Microphone Features
* Broad Bandwidth
* High Sensitivity
* Excellent Impact Resistance
* Lightweight
* Low Cost

CM-01B Contact Microphone Applications
* Electronic Stethoscope
* Bone-conducted Sound Pickup
* General Purpose Contact Microphone
* Vibration/Impact Sensing

CM-01B Contact Microphone Performance Specifications
* Sensitivity: 40V/mm
* Resonance Frequency: 5kHz
* Supply Voltage: 4 - 30VDC
* Supply Current: 0.1mA
* Operating Temperature: 5 ~ 60'C
* Storage Temperature: -20 ~ 85'C

NO-AE Nitric Oxide Sensor (NO Sensor) Description
Alphasense Nitric Oxide gas sensors operate using proven fuel cell technology.

NO-AENitric Oxide Sensor size:
20mm diameter, the industry standard size for portable gas detectors

The NO range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 200 parts per billion (ppb) whilst giving linear outputs to as high as 250ppm. The sensors are suitable for inclusion in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers.

Alphasense NO sensors provide a significant improvement in stability of response to transient relative humidity changes.

The NO sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.

NO-AE Nitric Oxide Sensor (NO Sensor) Specification
* Range: 5,000ppm NO limit of performance warranty
* Sensitivity: 40 to 80nA/ppm in 250ppm NO
* Resolution: < 1 RMS noise (ppm equivalent)
* Response time t90: < 75s from zero to 250ppm NO
* Temperature range: -30 to +50'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6 g

Matched Transmitter board for NO-AE NO Sensor
4-20mA Digital Transmitter Board
* Factory calibration, custom-set for immediate use
* Digital zero, sensitivity and temperature compensation
* Digital and 4-20mA output
* Biased or unbiased operation
* Calibration and range change

CO-AM Carbon Monoxide Sensor (CO Sensor) Description
Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology.

CO-AM Carbon Monoxide Sensor sizes:
20mm diameter, the industry standard size for portable gas detectors

The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology.

CO-AM Carbon Monoxide Sensor (CO Sensor) Specifications
* Range: 5,000 ppm CO limit of performance warranty
* Sensitivityâ??: 55 to 90 nA/ppm in 400ppm CO
* Response time t90: < 25 (s) from zero to 400ppm CO
* Resolution: < 0.5 RMS noise (ppm equivalent)â??
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120kPa
* Humidity range: 15 to 90% rh continuous
* Weight: < 6 g

Carbon Monoxide Sensor CM8

CM8 Carbon Monoxide Sensor Features:
1. More than ten years long life, electrochemical principle
2. Low sensitivity to ethanol;
3. Can reduce the influence of various interference gases, good linear output characteristics;
4. Consistency is very good;
5. The carbon monoxide gas selectivity and repeatability is very good;
6. The sensor signal output and the concentration of carbon monoxide gas into a linear relationship;
7. The leading production technology and new advanced materials;
8. Electrolyte pollution, materials comply with RoHS requirements;
9. Strong anti-interference;
10. The shell thicker will never rust, the new material used in component feet is conductive.

CM8 Carbon Monoxide Sensor Typical Applications:
1. Carbon monoxide detector alarms
2. Car alarms
3. Smart furniture
4. Commercial carbon monoxide detector
5. Industrial carbon monoxide detector
6. Indoor parking ventilation control
7. Portable carbon monoxide concentration meter
8. CO detection alarm.

PSML Series PM2.5 / PM1.0 Particle Sensor Description
PSML Series, in which SAMYOUNG S & C's 20 years knowledge and technology are concentrated, is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm ~ 1.0μm, which enables classifying PM2.5/PM1.0 level more precise than existing sensors. PSML Series which performs higher accuracy along with improved sensitivity than conventional sensors provides reliable information to users enabling more accurate and sophisticated control in the applications such as air purifiers, air conditioners and air quality measuring devices.

PSML Series PM2.5 / PM1.0 Particle Sensor Features
* Minimum Detectable Particle Size - 0.3μm
* PWM Output (Low Pulse Occupancy)
* Enhanced Accuracy (LPO)
* Precise PM2.5/PM1.0 Level Classification
* High Linearity and Uniformity
* Market-proven Reliability and Durability
* Pin-to-Pin Compatibility with Existing Sensors

PSML Series PM2.5 / PM1.0 Particle Sensor Applications
* Air Solution Products (Air Purifier, Air Conditioner and etc.)
* HVAC Control System
* Smart IAQ Device
* Outdoor Particle Sensing Device

IRC-A1 Infrared Carbon Dioxide (CO2) Sensor Description
Alphasense CO2 and Methane infrared sensors are supplied in the industry standard miniature (20mm diameter) gas sensor housing.

Patented optics give the best signal to noise ratio of any 20mm diameter NDIR and universal linearisation constants allow easy implementation.

The on-board temperature sensor allows for software compensation, including ideal gas law correction.

CO2
The IRC-A1 with dual channel pyroelectric detector. This CO2 sensor is designed for IAQ, safety, combustion and high CO2 process control applications.

Application notes explain linearisation, temperature compensation and circuitry.

The IRC-A1 cover the entire concentration range of measurement, simply implement the appropriate linearisation constants in software for your required range:
IAQ: 0 to 5,000ppm CO2
Safety: 0 to 5% CO2
Combustion: 0 to 20% CO2
Process control: 0 to 100% CO2

Matched Transmitter board for IRC-A1 Infrared CO2 Sensor
IRC-TX NDIR CO2 Transmitter Board Features
* Both 4-20mA and USB output
* Uses Alphasense IRC-A1 NDIR cell
* Adjustable bulb voltage to optimise long-term stability vs. resolution

NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Description
Alphasense Nitrogen Dioxide gas sensors operate using proven fuel cell technology.

NO2-A1 Nitrogen Dioxide Sensor size:
20mm diameter, the industry standard size for portable gas detectors

The NO2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 50 parts per billion (ppb) and an operating range to 20ppm. The sensors are suitable for use in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers.

The NO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.

NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Specifications
* Range: 20 ppm NO2 limit of performance warranty
* Sensitivity: -250 to -650 nA/ppm in 10ppm NO2
* Response time t90: < 50 (s) from zero to 10ppm NO2
* Resolution: < 0.02 RMS noise (ppm equivalent)
* Temperature range : -20 to 50 deg C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6 g

4S Rev. 2 CiTiceL Sulfur Dioxide Sensor (SO2 Sensor) Key Features & Benefits:
* Industry leading reliability
* Improved performance variability

4S Rev. 2 CiTiceL Sulfur Dioxide Sensor (SO2 Sensor) Technical Specifications
* Operating Principle: 3-electrode electrochemical
* Measurement Range: 0-20 ppm SO2
* Maximum Overload: 150 ppm SO2
* Filter: To remove H2S
* Sensitivity: 0.5 ± 0.1 µA/ppm
* Response Time (T90): < 25 Seconds at 20 deg C
* Repeatability: < ±2% of signal
* Recommended Storage Temp: 0 - 20 deg C
* Operating Humidity: 15% to 90%RH non-condensing

Poisoning
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments, and operation.

When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.

IoLine Tris Compatible pH Electrodes
Iodine glass pH electrodes for the most demanding applications

IoLine-TrisB IoLine Tris Compatible pH Electrodes Description
The IoLine Tris compatible pH electrodes use a patented three chamber system with an iodine reservoir in the iodine/iodide reference electrode. The standard hydrogen electrode has proven too difficult in practical use to gain more than a mere theoretical importance. The Ag/AgCl reference system, which is the most common reference system, can cause measuring instabilities originating from potential variations with changing temperature or reactions between silver ions and the measuring solution in the area of the diaphragm. IoLine pH electrodes, in contrast, have the advantage of a much lower temperature sensitivity and a metal ion free reference system.

IoLine-TrisB IoLine Tris Compatible pH Electrodes Features
* Unique iodine/iodide reference system
* Tris buffer compatible
* Exchangeable bridge electrolyte
* Integrated refill port
* Excellent for a wide range of applications

IoLine-TrisB IoLine Tris Compatible pH Electrodes Specifications
* pH Range: 0 to 14
* Temperature Range: 23 to +212'F (-5 to +100'C)
* Shaft: Glass
* Zero Point: pH = 7.000.25
* Reference System: iodine/iodide
* Type of Membrane Glass: A

IoLine High Performance pH Electrodes
Iodine glass pH electrodes with temperature sensor

IoLine-HPB IoLine High Performance pH Electrodes Description
The IoLine high performance pH electrodes use a patented three chamber system with an iodine reservoir in the iodine/iodide reference electrode. The standard hydrogen electrode has proven too difficult in practical use to gain more than a mere theoretical importance. The Ag/AgCl reference system, which is the most common reference system, can cause measuring instabilities originating from potential variations with changing temperature or reactions between silver ions and the measuring solution in the area of the diaphragm. IoLine pH electrodes, in contrast, have the advantage of a much lower temperature sensitivity and a metal ion free reference system.

IoLine-HPB IoLine High Performance pH Electrodes Features
* Unique iodine/iodide reference system
* Tris buffer compatible
* Exchangeable bridge electrolyte
* Integrated refill port
* Excellent for a wide range of applications
* Integrated temperature sensor

IoLine-HPB IoLine High Performance pH Electrodes Specifications
* pH Range: 0 to 14
* Temperature Range: 23 to +212'F (-5 to +100'C)
* Shaft: Glass
* Zero Point: pH = 7.00 ±0.25
* Reference System: iodine/iodide

MF5806 Series Digital Oxygen Flow Meters General description

MF5806 series oxygen flow meters are specially designed for hospital individual oxygen therapy applications. it provides precise measurement of instant oxygen intake rate and accumulated oxygen dosage for the individual oxygen delivery system. the design provides low power consumption that make it possible for operation on battery when power is an concern. themeter can be directly connected to the central station via RS485 that can provide remote monitoring and control which will reduce the risk of oxygen over dosing.

MF5806 Series Digital Oxygen Flow Meters Features and Applications
- Plug-and-paly hospital oxygen deliver design for easy usage
- Mass flow technology provide precise instant rate and accumulated dosage
- Historical data storage and retrieval
- Password protected access
- Instant rate and accumulated dosage alarm
- Excellent repeatability and accuracy
- Low power design with stand-alone operation by battery

MF5806 Series Digital Oxygen Flow Meters Specifications
* Flow Range: 0 ~ 10 SLPM
* Accuracy: �±(1.5+0.5 FS)%
* Repeatability: 0.5%
* Respâ??onse Time: 2 sec
* Digital Output: RS485 (Modbus)
* Working Pressure: 0.1 ~ 0.6 MPa
* Working Temperature: -10 ~ +55'C

New photoionization detector (pid) voc sensor
Features and benefits
* intrinsically safe
* saves time and money in r&d and product design
* 4p cell platform compatible
* variety of ranges and lamp energies
* quick start lamp ignition circuit
* long lamp life
* input voltage regulation for greater stability
* easily cleaned and field serviced
* out of warranty sensor exchange program

Applications
* industrial hygiene & safety monitoring
* confined space entry
* soil contamination and remediation
* hazmat sites & spills
* low concentration leak detection
*indoor air quality
* epa method 21

TGS5042 - for the detection of Carbon Monoxide

Features
* Battery operable
* High repeatability/selectivity to CO
* Linear relationship between CO gas concentration and sensor output
* Simple calibration
* Long life
* UL recognized component
* Meets UL2034, EN50291, and RoHS requirements

Applications
* Residential and commercial CO detectors
* CO monitors for industrial applications
* Ventilation control for indoor parking garages
* Recreational vehicle CO detectors
* Marine CO detectors
* Fire detection

Figaro's TGS5042 is a battery operable electrochemical sensor which offer several advantages over traditional electrochemical sensors. Its electrolyte is environmentally friendly, it poses no risk of electrolyte leakage, can detect concentrations as high as 1% CO, operates in a range from -40Ë? and +70Ë?C, and it has lower sensitivity to interferant gases. With a long life, good long term stability, and high accuracy, this sensor is the ideal choice for CO detectors with digital display. OEM customers will find individual sensors data printed on each sensor in bar code from, enabling users to skip the costly gas calibration process and allowing for individual sensor tracking. TGS5042 utilizes a standard AA battery-sized package.

Specifications
Model number: TGS5042-A00 (pin version)
TGS5042-B00 (ribbon version)
Target gases: Carbon monoxide
Typical detection range: 0 ~ 10,000ppm
Output current in CO: 1.2~2.4nA/ppm
Baseline offset:

GS Yuasa Dissolved Oxygen sensor KDS-25B

Features:
* Long life
* Virtually no in�uence from CO2
* No external power supply required for sensor operation
* No warmup time is required

Applications:
* Water quality control

The GS Yuasa Dissolved Oxygen Sensor KDS-25B is a unique galvanic cell type sensor which was developed for water quality control. Its most notable features are long life expectancy and it is not influenced by CO2.

Specification:
Measurement range: 0~80mg/L dissolved oxygen
Accuracy in water at 25'C±1'C: ±5% (full scale)
Operating conditions
Atmospheric pressure: 81~203kPa (corresponds to 10m of water depth)
Temperature: 5~35'C
Relative humidity: 10 ~ 90%R.H. (no condensation)
Thermal time constant: 10 min. or less
Initial output voltage in clean air under standard test conditions: 8.0~15.0mV
Standard test conditions
Atmospheric pressure: 1013±5hPa
Temperature: 25'C±1'C
Relative humidity: 60±5%

So-e2-960
Limiting current type sensor oxygen sensors

When voltage is applied to a zirconia electrolyte cell, oxygen is pumped through the zirconia disc from the cathode side to the anode side because the carriers of the current flowing through the zirconia electrolyte are oxygen ions. By attaching a cap with a pinhole on the cathode side of the cell and by increasing the voltage over the cell the current shows saturation due to the rate limiting step in the transfer of oxygen to the cathode. This saturation current is called limiting current and is nearly proportional to the ambient oxygen concentration.

Below the advantages of the oxygen sensor:
Measuring range 1.00 to 96.0 vol.% oxygen
High accuracy
For many types a more or less linear characteristic
Small temperature dependence of the sensor signal
Low interference with other gases
Long service life
In many cases â??single point calibrationâ?? necessary only once

Applications:
Medical
Laboratory
Food industry
Household/gastronomy
Measuring technique
Security technology/monitoring
(electrical-) industry

Characteristic data:
Measuring gas: oxygen concentration
Measuring medium: gaseous atmosphere
Measuring principle: limiting current type sensor
Measuring ranges: 1.00 - 96.0 vol.% o2
Response time (t90): 2 to 25 sec. (depends on: sensor type, gas flow, measuring chamber)
Sensor voltage / heating voltage / power consumption / heater cold resistance
Sensor voltage: 0, 7 to 1, 6 volt
Heating voltage: 3.6 â?? 4.4 volts
Power consumption: 1.3 to 1.8 watts (depends on application and packaging)
Cold resistance: r( 25'c ) = 3.25 ohm â± 0.20 ohm
Warm up time: min. 30 s

-

Cozir ambient sensor
Ultra low power carbon dioxide sensor

Cozir is an ultra low power (3.5mw4), high performance co2 sensor, ideally suited for battery operation, portable instruments and hvac.Based on gss ir led and detector technology, and innovative optical designs, the cozir offers the lowest power ndir sensor available.Optional temperature, humidity and light sensing are available.Cozir is a third generation product from gss - leaders in ir led co2 sensing.

With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the cozir ambient sensor is suitable for applications such as building control and horticulture.

* ultra-low power 3.5mw
* measurement ranges from 0 to 1%
* low noise measurement

-

Sprintir
High speed carbon dioxide sensor

Sprintir is a high speed (20 hz) co2 sensor, ideally suited for applications which require capture of rapidly changing co2 concentrations including metabolic assessment and analytical instrumentation.

* high speed sensing (20hz)
* measurement ranges from 0 to 100%
* 3.3v supply
* low power requirement 35mw
* flow through adaptor (optional)

-

Tgs4161 for the detection of carbon dioxide

Features:
* high selectivity to co2
* compact size
* low dependency on humidity
* long life and low cost
* low power consumption

Applications:
* indoor air quality control
* co2 monitors

Tgs4161 is a new solid electrolyte co2 sensor which offers miniaturization and low power consumption. A range of 350~10, 000ppm of carbon dioxide can be detected by tgs4161, making it ideal for indoor air control applications.

The co2 sensitive element consists of a solid electrolyte formed between two electrodes, together with a printed heater (ruo2 ) substrate. By monitoring the change in electromotive force (emf) generated between the two electrodes, it is possible to measure co2 gas concentration.

The top of the sensor cap contains adsorbent (zeolite) for the purpose of reducing the influence of interference gases.

Tgs4161 exhibits a linear relationship between â??emf and co2 gas concentration on a logarithmic scale. The sensor displays good long term stability and shows excellent durability against the effects of high humidity.

-

Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards

Specifications
Heater voltage:
Porous cap (15mm): 4.35v dc +/- 0.1v dc (1.85a)
Stand by: 2v dc (0.85a)
Pump resistance @ 700'C: < 6kOhm
Permissible gas temperature: -100 to 250C
Gas flow rate: 0 to 10 m/s
Repetitive permissible acceleration: 5 g
Incidental permissible acceleration: 30 g

The luminox family is a range of factory calibrated optical sensors which measure ambient o2 levels using the principle of fluorescence quenching by oxygen.

Our unique patented process allows us to produce an oxygen sensor that benefits from low power, traditionally associated with electrochemical sensing devices, while providing a much longer lifetime due to the non-depleting sensing principle.
* low drift
* rohs compliant
* extended temperature range compared to electrochemical sensing devices
* low in cost
* factory calibrated
* measures temperature and pressure (if selected)
* small and compact
* maintenance free

Luminox unlike other sensor technologies is stable and robust, it is rohs compliant as it does not contain lead or any other hazardous materials and has negligible cross sensitivity.

Luminox can be purchased as a single optical sensor, or as part as an evaluation kit which includes the luminox sensor evaluation interface board, which was designed to allow customers to easily evaluate the sensor with minimum effort or design work.

Typical applications for the luminox optical oxygen sensor are;
* oxygen detection
* portable equipment
* breathing apparatus
* inerting
* medical
* lab equipment
* agriculture
* incubation
* fore prevention
* flue gas in condensing boilers

Part numbering system
Lox - xx
01: measures 0-300 mbar ppo 2 and temperature (â°c)
02: measures 0-300 mbar ppo 2 , 0-25% o 2 , temperature (â°c) and 500-1200mbar barometric pressure

-

SO2-B4 Sulfur Dioxide Sensor 4-Electrode

PERFORMANCE
Sensitivity nA/ppm at 2ppm SO2 275 to 475
Response time t90 (s) from zero to 2ppm SO2 < 30
Zero current nA in zero air at 20â?? -80 to +80
Noise* ±2 standard deviations (ppb equivalent) 5
Range ppm limit of performance warranty 100
Linearity ppb error at 100ppm SO2 , linear at zero and 10ppm SO2 0 to -2
Overgas limit maximum ppm for stable response to gas pulse 200
* Tested with Alphasense ISB low noise circuit

LIFETIME
Zero drift ppb equivalent change/year in lab air < ±20
Sensitivity drift % change/year in lab air, monthly test < ±15
Operating life months until 50% original signal (24 month warranted) > 36

ENVIRONMENTAL
Sensitivity @ -20â?? (% output @ -20â??/output @ 20â??) @ 2ppm SO2 70 to 82
Sensitivity @ 50â?? (% output @ 50â??/output @ 20â??) @ 2ppm SO2 95 to 110
Zero @ -20â?? nA change from 20â?? 0 to -10
Zero @ 50â?? nA change from 20â?? 10 to 30

CROSS SENSITIVITY
Filter capacity ppm·hrs 450
H2S sensitivity % measured gas @ 5ppm H2S < 2
NO2 sensitivity % measured gas @ 5ppm NO2 < -160
Cl2 sensitivity % measured gas @ 5ppm Cl2 < -40
NO sensitivity % measured gas @ 5ppm NO < -2
CO sensitivity % measured gas @ 5ppm CO < 2
H2 sensitivity % measured gas @ 100ppm H2 < 0.5
C2H4 sensitivity % measured gas @ 100ppm C2H4 < 1
NH3 sensitivity % measured gas @ 20ppm NH3 < 0.1
CO2 sensitivity % measured gas @ 5% CO2 < 0.1

KEY SPECIFICATIONS
Temperature range â?? -30 to 50
Pressure range kPa 80 to 120
Humidity range % rh continuous (see note below) 15 to 90
Storage period months @ 3 to 20°C (stored in sealed pot) 6
Load Resistor ohm (ISB circuit is recommended) 33 to 100
Weight g < 13

MS5534C
Barometer Module

SPECIFICATIONS
* 10 - 1100 mbar absolute pressure range
* 6 coefficients for software compensation stored on-chip
* Piezoresistive silicon micromachined sensor
* Integrated miniature pressure sensor 9 x 9 mm
* 16 Bit ADC
* 3-wire serial interface
* 1 system clock line (32.768 kHz)
* Low voltage and low power consumption

Description:
The MS5534C is a SMD-hybrid device including a piezoresistive pressure sensor and an ADC-Interface IC. It provides a 16-bit data word from a pressure and temperature dependent voltage. Additionally the module contains 6 readable coefficients for a highly accurate software calibration of the sensor. MS5534C is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a microcontroller.

The MS5534C is fully software compatible to the previous versions (MS5534A and MS5534B). Compared to the previous versions, the ESD sensitivity level has been improved to 4kV on all pins.

Features:
* Supply voltage 2.2 V to 3.6 V
* Low supply current
* -40'C to +125'C operation temperature
* No external components required

Applications:
* Mobile altimeter/barometer systems
* Weather control systems
* Adventure or multi-mode watches
* GPS receivers

MS8607-02BA01
PHT Combination Sensor

SPECIFICATIONS
* Integrated pressure, humidity and temperature sensor
* QFN package 5 x 3 x 1 mm3
* Operating range: 10 to 2000 mbar, 0%RH to 100%RH, -40 to 85 'C
* High-resolution module: 0.016 mbar, 0.04%RH, 0.01'C
* Supply voltage: 1.5 to 3.6 V
* Fully factory calibrated sensor
* I2C interface

DESCRIPTION
The MS8607 is the novel digital combination sensor of MEAS providing 3 environmental physical measurements all-in-one: pressure, humidity and temperature (PHT). This product is optimal for applications in which key requirements such as ultra low power consumption, high PHT accuracy and compactness are critical. High pressure resolution combined with high PHT linearity makes the MS8607 an ideal candidate for environmental monitoring and altimeter in smart phones and tablet PC, as well as PHT applications such as HVAC and weather stations. This new sensor module generation is based on leading MEMS technologies and latest benefits from Measurement Specialties proven experience and know-how in high volume manufacturing of sensor modules, which has been widely used for over a decade.

FIELD OF APPLICATION
* Smart phones and Tablet PCs
* HVAC applications
* Weather station
* Printers
* Home Appliance and humidifiers

The gs oxygen sensor ke series (ke-25 and ke-50) is a unique galvanic cell type oxygen sensor which was developed in japan in 1985. Its most notable features are long life expectency, excellent chemical durability, and it is not influenced by co 2 . The ke series oxygen sensor is ideal to meet the ever-increasing demand for oxygen monitoring in various fields such as combustion gas monitoring, the biochemical field, medical applications, domestic combustion appliances, etc.

Features:
* long life
Ke-25 - 5 years / ke-50 - 10 years in ambient air
* virtually no influence from co2 , co, h2s, nox, h2
* low cost
* operates in normal ambient temperatures
* stable output signal
* no external power supply required for sensor operation
* no warmup time is required

Applications:
* medical - anesthetic instruments, respirators, oxygen-enrichers
* biotechnology - oxygen incubators
* food industry - refrigeration, greenhouses
* safety - air conditioners, oxygen detectors, fire detectors

Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* m18x1.5 screw mount

Specifications
Heater voltage* 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)

Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* pcb mountable

Specifications
Heater supply*
Porous lid cap 4vdc +/- 0.1vdc (1.7a)
Stand by 1.65vdc (0.7a)
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)

Features:

oxygen pressure range 2 mbar - 3bar
zirconium dioxide (zro2 ) sensing elements
non-consumption technology
integral heating element
no need for temperature stabilisation
no reference gas required
high accuracy
linear output signal
operates with external interface boards

Specifications

Heater supply*
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2 v dc (0.85a)

1.Features
Gallium Nitride Based Material
Schottky-type Photodiode
Photovoltaic Mode Operation
Good Visible Blindness
High Responsivity & Low Dark Current

2.Applications
UV Index Monitoring
UV-A Lamp Monitoring

3.Specifications
Spectral Detection Range: 240-370nm
Active area: 0.076mm2
Package: COB 2418 PKG
Chip size: 0.4mm
Responsivity: 0.14 A/W
Storage Temperature: -40 ~ +90'C
Operating Temperature: -30 ~ +85'C

UVA-only SiC based UV photodiode A = 0.06 mm
Model Number: SG01SA18

1.Properties of the SG01SA18 UV photodiode
* UVA-only sensitivity, PTB reported high chip stability
* Active Area A = 0,06 mm2
* TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10mW/cm2 peak radiation results a current of approx. 222 nA


2.About the material Silicon Carbide (SiC)
SiC provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current, high speed and low noise. These features make SiC the best available material for visible blind semiconductor UV de-tectors. The SiC detectors can be permanently operated at up to 170'C (338'F). The temperature coefficient of signal (responsivity) is also low, < 0.1%/K. Because of the low noise (dark current in the fA range), very low UV radiation intensities can be measured reliably

3.Options
SiC photodiodes are available with seven different active chip areas from 0.06 mm2 up to 36 mm2. Standard version is broadband UVA-UVB-UVC. Four filtered versions lead to a tighter sensitivity range. All photodiodes have a hermeti-cally sealed metal housing (TO type), either a 5.5 mm diameter TO18 housing or a 9.2 mm TO5 housing. Further op-tion is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).

Properties of the TOCON_ABC1
Broadband SiC based UV photodetector in TO5 housing with concentrator lens cap
0 to 5 V voltage output
peak wavelength at 280 nm
max. radiation (saturation limit) at peak is 18 nW/cm2, minimum radiation (resolution limit) is 1.8 pW/cm2
Applications: very low UV radiation, flame detection

Figaro Oxygen sensor SK-25F

Features:
* Virtually no influence from CO2, CO, H2S, NO, H2
* Temperature compensation circuit included
* Good linearity
* No position dependency
* Stable output signal
* No external power supply required for sensor operation
* No warmup time is required

Applications:
* Safety - Air conditioners, oxygen detectors, fire detectors, fuel cell systems
* Measurement - Oxygen monitors in flue gas
* Biotechnology - Oxygen incubators, anaerobic cultivators
* Food industry - Refrigeration, greenhouses

The Figaro Oxygen Sensor SK-25F is a unique galvanic cell type oxygen sensor. Its most notable features are no influence from CO2, good linearity up to 30% oxygen, and excellent chemical durability. This feature makes the sensor ideal for oxygen monitoring in various applications such as the biochemical field, food industry, and domestic safety applications.

Specification:
Measurement range: 0~30% O2
Accuracy: ±1% full scale
Operating conditions
Atmospheric pressure: 1013hPa ± 20%
Temperature: -10~50'C
Relative humidity: 0~99%RH (no condensation)
Response time (90%): â?¤ 15 seconds
Initial output voltage under factory test conditions: 5.5~8.5mV
Fcatory test conditions
Atmospheric pressure: 1013hPa
Temperature: 25±5'C
Life expectancy at 20'C in normal air: approx. 3 years

Miniature 30 bar Pressure Sensor Module MS5541-30C
0-30 bar absolute pressure range
16 Bit ADC

10 - 1100 mbar absolute pressure range
6 coefficients for software compensation stored on-chip
Piezoresistive silicon micromachined sensor
Integrated miniature pressure sensor 6.2 x 6.4 mm
16 Bit ADC
3-wire serial interface
1 system clock line (32.768 kHz)
Low voltage and low power consumption

Description:
The MS5540C is a SMD-hybrid device including a precision piezoresistive pressure sensor and an ADC Interface IC. It is a miniature version of the MS5534C barometer/altimeter module and provides a 16-bit data word from a pressure and temperature dependent voltage. MS5540C is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a microcontroller. Compared to MS5534A the pressure range (measurement down to 10 mbar) has been improved. The MS5540C is fully software compatible to the MS5534C and previous versions of MS5540. In addition, the MS5540C is from its outer dimensions compatible to the MS54XX series of pressure sensors. Compared to the previous version, the ESD sensitivity level has been improved to 4kV on all pins. The gel protection of the sensor provides a water protection sufficient for 100 m waterproof watches without any additional protection.

Features:
Integrated pressure sensor
Small size 6.2 x 6.4 mm
Pressure range 10-1100 mbar
Resolution 0.1 mbar
16 Bit ADC
6 coefficients for a software compensation stored on-chip
3-wire serial interface
1 system clock line (32.768 kHz)
Temperature range -40 ~ +85'C
Low voltage (2.2 to 3.6V)
Low power (Standby current:0.1uA)
Pb-free and RoHS-compatible
No external components required

Relative Humidity sensor - HM1520/HM1520LF

Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the moduleâ??s linear voltage output.

Main Features
* Tubular form for through wall mounting
* Not affected by water condensation
* Full interchangeability
* Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5 V DC supply
* Calibrated, linear voltage for easy electronic interface
* Controlled temperature dependency
* Ratiometric to voltage supply

Humidity Sensor Specfic Features
* No affected by long period at low humidity values.
* Patented solid polymer structure.
* High resistance to chemicals.
* Fast response time.

FOT-M Temperature sensor Fiber Optic Temperature sensor

The FOT-M is a fiber optic temperature sensor specifi cally designed for med-ical applications. The FOT-M temperature sensor combines all the desired characteristics you would expect from the ideal sensor. Its compact size, immunity to microwave and RF, resistance to corrosion, high accuracy and reliability make it the best choice for temperature measurements in harsh environments.

FISO's FOT-M fiber optic temperature sensor features complete immunity to EMI and RFI, built-in safety for medical applications, and high accuracy for temperature measurement. The FOT-M temperature sensor provides the medical industry with higher fi delity temperature measurements for demanding applications, like MRI applications.

Key Features
Intrinsically safe
Immune to EMI/RFI
Up to 85'C (180'F)
Accuracy of ±0.3'C
Miniature and rugged sensor
Fast response time

Applications
Medical applications
Industrial environments
Harsh and hazardous environments
MRI environment
Immune to microwaves and RF

Specifications
Temperature range: 20'C to 85'C (68'F to 185'F)
Resolution (*1): 0.1'C
Accuracy: ±0.3'C
Response time: Less than 750 ms
Connector type: ST connector
*1. Signal conditioner dependent

Misir is a low power (20mw4), high performance co2 sensor. Based on gss patented solid state ir sensor technology and innovative optical designs, misir is configured to meet the requirements of the hvac and demand led ventilation markets.

Low power 20mw
Measurement ranges from 0 to 1%
Low noise measurement

Indoor Air Quality Sensor IAQ Gas sensor 100ppm
- Zero Power Sensor
o Sensor Circuit - < 10 uW max
- Cold operation - No Heating required
-Rugged Design- Not poisoned by
sulfides, chlorides, NH3
- Stable Response– Not affected by
humidity, CO2, N2, Ar, most saturated
hydrocarbons, hexane
- Small Size& Low Profile - 20x20x3 mm
• Sensitive - In the ppm range
• Easy to Use - Linear Response
• Long Life - 10 years expected life
• Fast Response - < 20 seconds
• ROHS Compliant

Applications:
• Bad Air Quality Detection
• Indoor Air Monitor
• Air Purifier Controls
• Weather Stations
• Internet of Things
• Smart Homes
• Early Fire Detection
• Leak Detection
• HVAC Ventilation Control

optical oxygen sensor O2 Gas sensor LOX-02
Description
The LuminOx Family is a range of factory calibrated optical sensors which measure ambient O2levels using the principle of fluorescence quenching by oxygen.
Our unique patented process allows us to produce an oxygen sensor that benefits from low power, traditionally associated with electrochemical sensing devices, while providing a much longer lifetime due to the non-depleting sensing principle.

Applications
Typical applications for the Cheap Price Oxygen Sensor LOX-02 are;
Oxygen detection
Portable equipment
Breathing apparatus
Inerting
Medical
Lab equipment
Agriculture
Incubation
Fore prevention
Flue gas in condensing boilers

Cheap price Ozone sensor O3 Gas sensor 20ppm
SPEC’s printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC’s printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.

BENEFITS
• Small Size with Low Profile (20x20x3 mm)
• Long Life (10 years expected life)
• Fast Response (< 15 seconds)
• Low Power Consumption
• Individually Calibrated (NIST Traceable)
• ROHS Compliant

APPLICATIONS
• Air Quality Monitoring
• Industrial Safety
• Air Purification Control

OEM Optical Water Sensor Water Level Sensor
Whilst maintaining our very competitive pricing, the Optomax Industrial range of liquid level sensors offer higher supply voltage ranges, higher current drive options and an extended temperature range for more challenging specifications and environments.
SST has improved this range of industrial level sensors and introduced new features such as;
Low power consumption, reducing supply current from 15mA to 2mA
Increased output power, increasing output sink and source current from 500mA to 1A
They are solid state, no moving parts unlike mechanical switches where debris can get jammed and cause unreliability.
Very accurate and precise readings
Easy to install, saving assembly time
Very robust which permit use in a wide range of fluids and chemicals
Housings, cabling and connectors are made to your requirements
High pressure options available

Applications
Typical applications for our Optomax Industrial Range of Liquid Level Sensors are;
Engine Oil & Coolant High/Low levels
Cutting Machine Coolant Levels
Gear Box Oil Levels
Pump & Gearbox Leak Sensor

Digital Temperature Humidity Sensor HTU21D In Stock
1. digital temperature and humidity sensor
2. range:1-100%RH
3. original, high quality, competitive price

DESCRIPTION
HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format.
HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.

Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* 80mm, 220mm and 400mm probes available

Specifications
Heater supply*
Porous lid cap 4v dc +/- 0.1v dc (1.7a)
Stand by 1.65v dc (0.7a)
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)

SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Description:
As a result of its very special electronic architecture the SONIC-ANEMO-MICRO shows a very low electrical consumption. It is ideal for remote stations or mobile installation.

SONIC-ANEMO-MICRO is an OEM sensor designed for integration in other original Equipment.

This sensor shows a very low consumption. It operates from 300µA.
SONIC-ANEMO-MICRO is the lowest consumption power solution of all LCJ sensors.

SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Specification:
Output data format: ASCII format, avaibility
Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility
Output rate: select. 1 meas. and Tx: every 1,6 or 18 s
Wind module sensitivity: 0.12 m/s
Wind module resolution: 0.05 m/s
Wind module dynamic: 0.12 to 40 m/s
Direction sensitivity: +/-1.5 degree
Direction resolution: 1 degree
Power supply: 3 V to 3.6 V DC
Electrical consumption: 200µA avg
Op. temp. without icing: -15 degree C to +50 degree C
Cable: 50 cm / 4x0.22 mm2
Connection: 4 wires
Weight of the head: 100 gr
Weight of unit assembly: N/A
Mounting: N/A

CV7-V Ultrasonic Wind Speed Sensor Description
The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183.

CV7-V Ultrasonic Wind Speed Sensor Application
Static wind sensor
A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure.
CV7 series was extensively tested in Marine applications for both precision and robustness.

Configurable wind sensor
CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format.

CV7-V connexion
CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats.
In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format.

Quality
All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process.

CV7-V Ultrasonic Wind Speed Sensor Specification:
Output data format: NMEA0183; MWV, XDR
Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility
Output rate: 2 Hz / 30 Hz measurement
Wind module sensitivity: 0.12 m/s
Wind module resolution: 0.05 m/s
Wind module dynamic: 0.12 to 40 m/s
Direction sensitivity: +/-1.5 degree
Direction resolution: 1 degree
Power supply: 8 V to 30 V DC
Electrical consumption: 9 mA
Op. temp. without icing: -15 degree C to +55 degree C
Cable: 25 m / 4x0.22 mm2
Connection: 4 wires
Weight of the head: 100 gr
Weight of unit assembly: 200 gr with mounting part
Mounting: Vertical ; 300 aluminium arm, 16 mm

MB1444 USB-ProxSonar-EZ4
High performance USB ultrasonic proximity detection sensor

MB1444 High Performance USB Ultrasonic Sensor Product Description
The USB-ProxSonar-EZ4 has a detection zone of ~1 feet and will allow for 15+ simultaneous sensors.
These ultrasonic proximity sensors detect objects in a calibrated detection zone. The USB-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ detection zone.

MB1444 High Performance USB Ultrasonic Sensor Product Specifications
* USB interface
* ~2.5 second target acquire time*
* ~1.5 second target release time*
* Automatic multi-sensor operation
* People sensor
* Resolution of 1 inch
* Maximum Range of 125 inches (318 cm)
* Detection zone range of 12 inches (30 cm)
* 42kHz Ultrasonic sensor measures distance to objects
* RoHS compliant
* Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches
* Small, light weight module
* Designed for easy integration into your project or product
* Short range detection

Iaq_100 p package 110-801
15x15 indoor air quality sensor 100 ppm p package 110-801

Description
Spec sensors' iaq_100 is a screen printed electrochemical sensor component specifically designed for the broad detection of gases associated with poor air quality: sulfides, alcohols, ammonia, odorous gases, and carbon monoxide.

Benefits
* zero power sensor
Sensor circuit - < 10 uw max
* cold operation - no heating required
* rugged design- not poisoned by sulfides, chlorides, nh3
* stable response - not affected by humidity, co2, n2, ar, most saturated hydrocarbons, hexane
* small size& low profile - 20x20x3 mm
* sensitive - in the ppm range
* easy to use - linear response
* long life - 10 years expected life
* fast response - < 20 seconds
* rohs compliant

Applications
* bad air quality detection
* indoor air monitor
* air purifier controls
* weather stations
* internet of things
* smart homes
* early fire detection
* leak detection
* hvac ventilation control

3sp_no2_20 p 15x15 no2 sensor 20 ppm p package 110-501

Benefits
* small size with low profile (20x20x3 mm)
* long life (10 years expected life)
* fast response (< 15 seconds)
* low power consumption
* individually calibrated (nist traceable)
* rohs compliant

Applications
* air quality monitoring
* industrial safety
* air purification control

Description
Spec's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. Spec's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.

-

3sp_o3_20 p 15x15 o3 sensor 20 ppm p package 110-401

Benefits
* small size with low profile (20x20x3 mm)
* long life (10 years expected life)
* fast response (< 15 seconds)
* low power consumption
* individually calibrated (nist traceable)
* rohs compliant

Applications
* air quality monitoring
* industrial safety
* air purification control

Description
Spec's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. Spec's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.

-

Minir sensor
Low power carbon dioxide sensor

Minir is an ultra low power (3.5mw4 ), high performance co2 sensor, ideally suited for battery operation and portable instruments. Based on patented ir led and detector technology and innovative optical designs, minir is a third generation product from gas sensing solutions ltd - leaders in ir led co2 sensing.

* ultra-low power 3.5mw
* measurement ranges from 0 to 100%
* 3.3v supply.
* peak current only 33ma.
* compact 20mm diameter package

-

Cozir lp
Low power, low profile carbon dioxide sensor

Cozir lp is a low profile, low power, high performance co2 sensor. Operating at a 2hz update rate while only consuming 3mw5 , its world leading power consumption make it ideally suited for battery operation and portable instruments. Based on proven gss ir led and detector technology and innovative optical designs. Cozir lp is a third generation product from gas sensing solutions ltd - leaders in ir led co2 sensing.

With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the cozir lp sensor is suitable for applications such as building control and indoor air quality.

* ultra-low power 3mw
* measurement ranges from 0 to 1%
* 3.3v supply
* peak current only 33ma
* commands set and electrical interface compatible with gss cozir sensor range

-

O2-a2 oxygen sensor

Performance
Output î¼a @ 20.9% o2 80 to 120
Response time t90 (s) from 20.9% to 0% o2 < 15
Zero current î¼a in n2 < 2.5
Linearity % o2 deviation @ 10% o2 0.6

Lifetime
Output drift % change in output @ 3 months < 1
Operating life months until 85% original output of 20.9% o2 > 24

Environmental
Humidity sensitivity % o2 change: 0% to 95% rh @ 40â?? < 0.7
Co sensitivity % (change o2 reading) / % co2 @ 5% co2 0.1
Pressure sensitivity (% change of output)/(% change of pressure) @ 20kpa < 0.1

Key specifications
Temperature range â?? -30 to 55
Pressure range kpa 80 to 120
Humidity range % rh non-condensing (0 to 99% rh short term) 5 to 95
Storage period months @ 3 to 20â?? (store in sealed pot, open circuit) 6
Load resistor î© (recommended) 47 to 100
Diameter mm (including label) 20.0
Height mm (including foam ring) 17.4
Weight g < 16

-

MS1451

Description:
The MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required.

The pressure sensor is available with a gage or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. A cap is attached to the ceramic substrate, protecting the chip and providing the pressure port.

The devices are shipped in plastic anti-static shipping tubes for use with automated production equipment. Caps are also available with a narrow hole or a large hole to interface with the pressure media.

Features:
* PC Board Mountable Pressure Sensor
* 0-60 mV Output
* Gage and Absolute Pressure
* Low Cost
* Surface Mount Package
* ±0.25% Pressure Non-linearity
* 3 Pressure Port Options
* Solid State Reliability
* Low Power

Applications:
Altitude Measurement
Barometric Pressure
Medical Instrumentation
Consumer Appliances
Tire Pressure

FAM-001-01 Air Quality Detection Module Description:
FAM-001-01 is combined with sensor TGS2600 which detects indoor air quality, it is high sensitivity to low concentration pollutions, like , cooking, TVOCS.

FAM-001-01 Air Quality Detection Module Features:
* Low power consumption
* Long Lifetime
* High selective to low concentration gas
* High sensitivity to cigarette or cooking and VOCS

FAM-001-01 Air Quality Detection Module Applications:
* Indoor Air Purifier
* Indoor Air Quality Monitor
* Air Condition
* HVAC

FAM-001-01 Air Quality Detection Module Parameters:
Power Supply: 5 +/- 0.2V DC
Power consumption: 250mW
Operating Temperature: -10~55'C
Dimensions: 27.5*23mm
Terminal Type: K2 PH-12AYT(interval 2mm)

Dust Sensor Module DSM501B Description
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited.

Dust Sensor Module DSM501B Type:
DSM501A : 2mm pitch connector type (20010WR-05).
DSM501B : 2.5mm pitch connector type (S5B-EH).

Dust Sensor Module DSM501B Electrical characteristics:
Supply voltage: DC5V +/- 10%
Power consumption: 90mA
Operating temperature range: -10~ +65'C
Operating humidity range: 95%RH or less (without dew condensation)
Recommend storage condition: -20~ +80'C
Dimension: W59 * H45 * D20 (mm)
Detectable particle size: approx. 1um (minimum)
Detectable range of concentration: 0 ~ 1.4mg/m3
Output signal: PWM (pulse width modulation)
Time for stabilization: 1 minute after power turned on
Sensor characteristics: To be maintained in between the upper limit and lower limit of the standard dust sensor unit

Dust Sensor Module DSM501B Features:
* PWM output
* Easy installation
* Single power supply
* Compact size and lightweight

Dust Sensor Module DSM501B Application:
* Ventilator etc
* Air conditioner
* Air quality monitor
* Air cleaner or Air purifier

MB7389
HRXL-MaxSonar-WRMT
High Performance Ultrasonic Precision Rangefinder

High Performance Ultrasonic Precision Rangefinder MB7389 Product Description
The HRXL-MaxSonar-WRMT ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.

High Performance Ultrasonic Precision Rangefinder MB7389 Features and Benefits
* Factory calibrated beam width
* Low operating voltages from 2.7V to 5.5V
* All range outputs are active simultaneously
* Superior clutter rejection

High Performance Ultrasonic Precision Rangefinder MB7389 Applications and Uses
* Bin Level Measurement
* Tank Level Measurement

HS1101LF - Relative Humidity Sensor

* Lead free component
* High reliability and long term stability
* Patented solid polymer structure
* Suitable for linear voltage or frequency output circuitry
* Fast response time and very low temperature coefficient

DESCRIPTION
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed.

FEATURES
* Full interchangeability with no calibration required in standard conditions
* Instantaneous desaturation after long periods in saturation phase
* Compatible with automatized assembly processes, including Pb free wave soldering and reflow processes
* Individual marking for compliance to stringent traceability requirements
* Part may be washed with distilled water.

APPLICATIONS
* Automotive
* Home Appliance
* Printers
* Meteorology

PERFORMANCE SPECS
Operating Temperature: -60 to 140 °C
Storage Temperature: -60 to 140 °C
Supply Voltage (Peak): 10 Vac
Humidity Operating Range: 0 to 100 % RH

Humidity Module HTG3513CH Voltage Output Humidity Sensor

DESCRIPTION
Based on the rugged HUMIREL humidity sensor, HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3513CH is designed for high volume and demanding applications.

FEATURES
* Voltage Supply: 3.3 Vdc
* Nominal Output @55%RH: 1.462~1.568 V
* Humidity Average Sensitivity: +18 mV/%RH
* Current consumption: 1.0 mA dc
â?¢ Humidity Measuring Range: 0~100 %RH
* Humidity Operating Range: 0~100%RH
* Temperature Operating Range: -40 ~110'C
* Suitable for small bulk assembly
* Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
* Full interchangeability. Better than +/-3%RH and +/-0.25'C
* Humidity calibrated within +/- 3% RH @ 55% RH
* Temperature measurement through NTC direct output
* Demonstrated reliability and long term stability
* Reliability not affected by repeated condensations

APPLICATIONS
* Automotive
* Home Appliance
* Printers

Temperature and Relative Humidity Sensor Module

Description:
Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output.

Features:
* Small size product
* Compliant with RoHS recommendations and most of Lead Free Soldering Process
* Humidity calibrated within ±3% @55%RH at 5Vdc
* Stable, proportional frequency output from 0 to 100% RH
* High quality thermistor
* One of the smallest humidity/temperature modules on the market
* High reliability and long term stability
* Not affected by water immersion
* Stable characteristics with temperature
* Part could be washed with distilled water
Humidity Sensor Specific Features:
* Instantaneous de-saturation after long periods in saturation phase
* Fast response time
* High resistance to chemicals
* Patented solid polymer structure
Temperature Sensor Specific Features:
* 10kΩ ±1% NTC temperature sensor
* Stable
* High sensitivity

APPLICATIONS:
* Printers
* HVAC controller

PERFORMANCE SPECS
Storage Temperature: -40 to 105 'C
Storage Humidity: 0 to 100 % RH
Supply Voltage (Peak): 16 Vdc
Humidity Operating Range: 0 to 100 % RH
Temperature Operating Range: -40 to 85 'C

MS5541-30C
Miniature 30 bar Module

Specifications
* 0 - 30 bar absolute pressure range
* 6 coefficients for software compensation stored on-chip
* Piezoresistive silicon micromachined sensor
* Integrated miniature pressure sensor 6.2 x 6.4 mm
* 16 Bit ADC
* 3-wire serial interface
* 1 system clock line (32.768 kHz)
* Low voltage and low power consumption
* High Endurance (HM version)

Description:
The MS5541-30C is the high-pressure version of MS5541C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16 Bit Micropower Sensor interface IC known from the MS5535C. The ESD sensitivity has been improved to 4kV on all pins. In addition to this the MS5541- 30C is from its outer dimensions compatible to the MS54xx series of pressure sensors. It uses an antimagnetic polished stainless steel ring for sealing with O-ring. The sensor provides 16 Bit pressure and temperature data via a 3 wire serial interface that can be easily interfaced with 4 Bit low power microcontrollers. 64 Bit of factory programmed PROM provides calibration data for a highly accurate pressure and temperature calculation.

Features:
* Resolution 3.0mBar
* Supply voltage 2.2V to 3.6V
* Operating current < 5µA
* Standy current < 0.1µA
* -40'C to +85'C
* No external components required

Applications:
* Diving computers and divers watches
* Mobile water depth measurement systems
* High endurance pad technology (HM version)

1. Features
Gallium Nitride Based Material
Schottky-type Photodiode
Photovoltaic Mode Operation
Good Visible Blindness
High Responsivity & Low Dark Current

2. Applications
Full UV Band Monitoring
UV-A Lamp Monitoring

3. Absolute Maximum Ratings
Storage Temperature: -40~90'C
Operating Temperature: -30~85'C
Reverse Voltage: 5V
Forward Current: 1mA
Optical Source Power Range: 0.01µ~100m W/cm2
Soldering Temperature: 260'C

4. Characteristics (at 25'C)
Dark Current: 20nA
Photo Current: 2.8~3.4µA, 3.1µA(Typ)
Temperature Coefficient: 0.05%/'C
Responsivity: 0.18A/W
Spectral Detection Range: 220~370nm
Active area: 1.536mm2

Innovative Weather Monitoring

Especially ideal for mobile installations, Magellan MX Weather Stations combine the convenience of an all-in-one multi-parameter weather sensor with an internal compass and GPS. Four different models offer sensor options including:
* Ultrasonic wind speed and direction measurement
* A combined temperature, pressure, humidity instrument mounted inside three double louvered, naturally aspirated radiation shields
* Optical rain gauge provides measurements based on the size and number of drops

MX600: rain gauge, ultrasonic wind speed and direction, temperature, relative humidity, air pressure, compass, GPS
MX500: ultrasonic wind speed and direction, pressure, temperature, relative humidity, compass, GPS
MX300: pressure, temperature, relative humidity (no compass or GPS)
MX200: ultrasonic wind speed and direction only, compass, GPS

Magellan MX Weather Stations Feature
* Weather-protected sensor unit designed for maximum portability and utility
* GPS for compensated wind speed
* Automatic self-alignment of wind direction using internal compass
* No mechanical components means virtually no maintenance
* Low power consumption ideal for battery or solar-powered installations
* One-year warranty

Sensor Specifications

Temperature
Range: -40 to +70'C (-40 to +185'F)
Accuracy: ±0.3'C (20'C); ±0.54'F (68'F)
Resolution: 0.1'C (0.18'F)
Units: 'C, 'F

Barometric Pressure
Range: 8.85 - 32.48 inHg (300 - 1100 hPa)
Accuracy: ±0.015 inHg (±0.5 hPa) @ 77'F(25'C)
Resolution: 0.003 inHg (0.1 hPa)
Units Available: kPa, hPa, mbar, inHg

Wind Speed
Range: 0-134mph (0-60 m/s)
Accuracy: ±3% 0.02 mph to 90 mph (±3% 0.01m/s to 40 m/s), ±5% above 90 mph and up to 134
Resolution: 0.02 mph (0.1 m/s)
Units Available: knots, mph, km/hr, m/s

Wind Direction
Range: 0 to 359'
Accuracy:± 3' 0.02 mph to 90 mph (0.01 m/s to 40 m/s), ±5' above 90 mph and up to 134 mph (40 m/s and up to 60 m/s)
Resolution: 1.0'

Relative Humidity
Range: 0 to 100%
Accuracy: ± 2% @ 68'F (10%-90% RH)
Resolution: 1.0%

Precipitation
Accuracy:±2% at

Sonic-anemo-dzp ultrasonic wind speed sensor description:
Sonic-anemo-dzp ultrasonic anemometer is powered by its own solar panel. It is well suited to remote installations where power consumption matters. This unit connects directly to a pulse or potentiometer input (i.E. On davis instruments). It is a useful product for professionals, integration to aws (autonomous weather station), and well-informed users.

Sonic-anemo-dzp ultrasonic wind speed sensor specification:
, output rate: 1 measure and update per second
, wind module sensitivity: 0.12 m/s
, wind module resolution: 0.05 m/s
, wind module dynamic: 0.12 to 40 m/s
, direction sensitivity: +/-1.5'
, direction resolution: 1' (9 bits)
, power supply: photovoltaic panel, battery lifepo4
, op. Temp. Without icing: -15'c to +55'c

Do1200 and do1200tc dissolved oxygen sensors

Item no.: do1200/h, do1200/t, do1200tc/h, do1200tc/t, 971598, 971598tc

Do1200 dissolved oxygen sensor features
* reliable galvanic sensing technology
* compact 12mm design
* for portable, laboratory or on-line use
* optional integral atc element
* easy to use pre-membraned replacement caps

Do1200 dissolved oxygen sensor description
The do1200 and do1200tc feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding hdpe membrane caps for portable or lab use. Optional ptfe membrane caps are available for on-line or heavy uv exposure applications. Fill solution is replaceable when required.

The do1200 is supplied without internal temperature compensation. The do1200tc can be supplied with a variety of user defined atc elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our fc75p 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch fnpt threaded tees.

Do1200 dissolved oxygen sensor specifications
* range: 0-20 mg/l
* body material: epoxy and noryl
* max temperature: 50 degrees c
* saturation output: hdpe = 47mv +/- 9mv, ptfe = 33mv+/-9mv
* pressure: 0-100 psig (7.5 bar)
* calibration: single point in air
* response time: after equilibration, hdpe 1 minute for 2mv, ptfe 2 minutes for 2mv

O2-M2 Oxygen Sensor Description
Alphasense Oxygen sensors use capillary flow control.

Unlike partial pressure oxygen sensors, they have good pressure and temperature dependence, making them the best choice in safety applications.

Standard galavanic sensors use lead for greatest reliability but fixed lifetime.

Specifications
* Output: 80 to 120 uA @ 20.9% O2
* Response time t90: < 15 (s) from 20.9% to 0% O2


* Linearity: 0.6 % O2 deviation @ 10% O2
* Operating life: > 24 months
*Temperature range: -30 to 55 'C
* Pressure range: 80 to 120 kPa
* Humidity range: 5 to 95 % rh continuous
* Diameter: 20.0 mm (including label)
* Heigh: 17.4 mm (including foam ring)
* Weight: < 16g

Dgs-so2 968-038 digital so2 sensor module description
Easily add so2 sensing to your iot application with our sulfur dioxide digital gas sensor module that provides a calibrated and temperature compensated output.

0 to 20 ppm so2 sensor with digital output.

Dgs-so2 968-038 digital so2 sensor module benefits
Low power - 1 mw 1 minute sampling
Calibrated & temp. Compensated output
Fast response < 30 seconds
Simple digital uart interface
Integrated t & rh sensors
Robust 10-year estimated lifetime
Rohs compliant
Small form factor
Uart to usb adapter provided
Lightweight (< 2 oz.)

Dgs-so2 968-038 digital so2 sensor module applications
Air purification control
Air quality monitoring
Industrial safety sensing

Dgs-so2 968-038 digital so2 sensor module measurement performance characteristics
Based on standard conditions 25 âºc, 50% rh and 1 atm
Measurement range: 0 to 20 ppm
Resolution: 50 ppb
Measurement accuracy: 15% of reading,
, measurement repeatability, : < â± 3% of reading,
T90 response time (100 ppm step), : < 30 seconds,

Y504-A Dissolved Oxygen Sensor Description
The sensor is based on optical fluorescence lifetime quenching technique. Its technical procedure meets ASTM D888-09 standard for optical sensing of dissolved oxygen. This online sensor is developed to integrate with Yosemite wireless monitoring system. Its rugged design and large measurement range make it ideal for sampling, flow cell, ground water and waste water measurements.

Y504-A Dissolved Oxygen Sensor Applications
Fish farmer, waste water plant, river, stream, and ocean monitoring

Y504-A Dissolved Oxygen Sensor Feature
* 0-20mg/L or 0-200% Saturation
* 0~50 'C; IP68 rating
* Membraneless, no electrodes design
* No oxygen consumption
* Flow Independent
* Automatic temperature compensation
* No H2S Interference
* Low Drift, fast response, and more accurate
* Low Maintenance, low operating cost
* Easy sensor cap replacement
* RS-485; MODBUS protocol compatible

Y504-A Dissolved Oxygen Sensor Technical Specifications
* Range: 0-20mg/L or 0-200% Saturation
* Response Time: 10 sec
* Housing IP Rating: IP68
* Accuracy: 1%
* Drift:

-

Fs1015cl gas flow sensors description
Fs1015cl mass flow sensors are specially designed for medical equipment flow monitor and control applications, and are made with world leading proprietary mems mass flow designed channel with a low pressure loss. The current models can be readily applied to ventilators and anesthesia equipments. These sensors can also be sterilized in medical liquids for reuse or hygienic purposes.

Fs1015 series can measure a flow up to 150 slpm. Iso-15mm connection model is readily applicable to ventilators and/or anesthesia equipments.

Fs1015cl gas flow sensors features and applications
- mems thermal mass flow sensor
- excellent rangeability with integrated multiple sensing elements
- high stability at null and full scale
- fast response
- low power consumption
- low pressure loss

Fs1015cl gas flow sensors performance specifications
* flow range: 0 to 100; 0 to 150slpm
* turn-down ratio: > 100 : 1
* accuracy: +/- (2.0 + 0.5 fs) %
* repeatability: +/- 0.5% reading
* null shift: â± 30mv
* output shift: +/- 0.12%/'c
* response time: 8 (max.) ms

FS6122B Medical Respiratory Sensor Description
FS6122 series mass flow sensors are specially designed for personal ventilators for CPAP (continuous positive airway pressure). The sensor integrates MEMS mass flow sensor with a MEMS pressure the necessary information for the poper performance of the state-of-art CPAP ventilators. The miniature package not only provide space saving for the ventilator but also provides high accuracy and fast response for both mass flowrate measurement and gauge pressure data while with a very low pressure drop and small dead space.

FS6122B Medical Respiratory Sensor Features
* Measures mass flow rate and gauge pressure
* Fast response time
* Highly sensitive in small flow rate
* Low power consumption
* Specially designed for medical equipment

FS6122B Medical Respiratory Sensor Performance
* Flow Range: -250 ~ +250 SLPM
* Accuracy: ±(2.5+0.5FS)%
* Output: Linear, Analog/I2C
* Response Time: 5ms

Pdsm010 particle sensor module product summary
Pdsm010 detects approx. 1m particle such as house dust, pollen, germs, dust mites and cigarette smoke and measures the concentration of floating particles in a room space up to maximum 30m3.

This sensor is an ideal product for automatic room air monitoring system such as an air purifier.

Pdsm010's signal is converted to pwm output by internal circuit and mcu program. Also, the sensor's filter circuit and mcu program can remove a noise in order to operate more stably when a noise is in-flowed in the signal.

Pdsm010 has advantages of both stable detecting ability and high manufacturing efficiency.

The sensor does not have an additional control point (vr trimmer) on the device unlike its previous model (dsm). It prevents potential malfunction often occurred by user's arbitrary modification.

Pdsm010 particle sensor module features
* customized sensitivity for efficient control in application
* detects approx. 1m particle
* mcu control (factory calibration)
* easy maintenance
* pwm output (low logic pulse active)
* noise protection

Pdsm010 particle sensor module applications
* air cleaners, air conditioners
* ventilation system, fan control
* iaq monitoring & control
* iot device

Pdsm010 particle sensor module product specification
* supply voltage: 5v 10% v
* supply current (@ 5v): < 85ma
* storage temperature range: -20 ~ 80'c
* operating temperature range: -10 ~ 65'c
* operating humidity range: < 95%rh

Wq-cond rugged water conductivity sensors description
Wq-cond conductivity sensors are suitable for measuring conductivity in a wide variety of applications including laboratories, streams, rivers, and groundwater. The conductivity sensor's small size and rugged housing make it useful for hand held measurements or permanent installation.

Wq-cond rugged water conductivity sensors features
* fully encapsulated electronics
* dual 4-20 ma outputs
* sensor armor available for harsh environments
* marine grade cable with strain relief
* measure conductivity up to 82 feet deep

Wq-cond conductivity sensors applications
Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications.

Wq-cond rugged water conductivity sensors specifications
* temperature range: 23 to 158'f (-5 to 70'c)
* conductivity accuracy: +0.5% of reading
* temperature accuracy: +0.4'f (+0.2'c)
* temperature resolution: 0.02'f (0.01'c)
* output: dual 4-20 ma
* maximum pressure: 35 psi (82 ft (25m))
* warm-up time: 3 seconds minimum
* operating voltage: 10-36 vdc

SH-300-NDC NDIR CO2 Sensor Module Features
* Best Extremely Precise Sensor
* Quick Response Time
* Long Time Use, Stable performance at High & Low Temperature
* Waterproof Filter for anti static filters fine dust and humidity in the air
* One-way air indraft for represent average value when momentary CO2 Value change in the air
* Low Current consumption
* Output support: UART, 0~3V Analog

SH-300-NDC NDIR CO2 Sensor Module Application
* CO2 Control for Indoor Air Quality
* CO2 Measuring for Ventilation Control
* CO2 Control for Building, Hospital, School
* CO2 Control for Air cleaner, Air conditioner.
* Mushroom Control, Boiler Control

SH-300-NDC NDIR CO2 Sensor Module Technical Specification
* Measuring Type: Dual Light Wavelength NDIR
* Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm
* Accuracy: ±2% FS, ±3 % measured value @ 0 ~ 50'C
* Response Time: Every 2.0 Seconds
* Warm-Up Time @25'C: < 90sec
* Output support: UART, 0~3V Analog
* Operating Temperature: -10 ~ 50'C
* Operating Humidity: 0 ~ 99.5% RH (Non-Condensing)

HTG3515CH Voltage Output Temperature and Humidity Sensor DESCRIPTION
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications.

HTG3515CH Voltage Output Temperature and Humidity Sensor FEATURES
* Voltage Supply: 5 Vdc
* Nominal Output at 55%RH: 2.401~2.559 V
* Humidity Average Sensitivity: +26 mV/%RH
* Current consumption: 1.2 mA dc
* Humidity Measuring Range: 0~100 %RH
* Humidity Operating Range: 0~100%RH
* Temperature Operating Range: -40 ~110 deg C
* Suitable for small bulk assembly
* Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
* Full interchangeability. Better than +/-3%RH and +/-0.25 deg C
* Humidity calibrated within +/- 3% RH at 55% RH
* Temperature measurement through NTC direct output
* Demonstrated reliability and long term stability
* Reliability not affected by repeated condensations

HTG3515CH Voltage Output Temperature and Humidity Sensor APPLICATIONS
* Automotive
* Home Appliance
* Printers

Mb7139 xl-trashsonar-wr
High performance ultrasonic trash bin measurement

Mb7139 xl-trashsonar-wr ultrasonic sensor product description
The mb7139 xl-trashsonar-wr1 is a weather resistant sensor designed for trash bin level measurement.

The mb7139 xl-trashsonar-wr1 reports the range to the first detectable target in a trash bin. This sensor is our most recommended sensor for testing within trash bins.

High output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electric noise sources. The xl-trashsonar-wr sensors are factory calibrated to match narrow sensor beam patterns and provide reliable mid-range detection zones.

Mb7137 is the i2c version of this sensor.

Mb7139 xl-trashsonar-wr ultrasonic sensor product specifiations
Resolution of 1 cm
10hz read rate
42khz ultrasonic sensor measures distance to objects
Rohs compliant
Read from all 3 sensor outpus: analog voltage, pulse width, rs232 serial
Operates from 3.0-5.5v
Operational temperature from -40'c to +65'c
Maximum range of 350 cm (138 inches)

Mb7139 xl-trashsonar-wr ultrasonic sensor features and benefits
Real-time calibration, noise rejection and additional filtering provides stable range information
Excellent for applications that require consistently accurate outputs
Impressive acoustic and electrical noise resistance

Mb7139 xl-trashsonar-wr ultrasonic sensor applications and uses
Autonomous navigation
Environments with acoustic and electrical noise
Bin level measurement
Tank level measurement
Trash level measurement

SONIC-ANEMO-DVC Ultrasonic Wind Speed Sensor Description:
As Worldwide Premiere launch, a specific version of the CV7-V which connects directly to the wind sensor input on Davis instruments.

This sensor will allow the replacement of mechanical anemometers / wind vanes with no need of anything else but power supply.

Itâ??s an exclusive and useful product for both, professionals and well-informed amateurs.

SONIC-ANEMO-DVC Ultrasonic Wind Speed Sensor Specification:
* Output rat: 2 Hz / 30 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s (16 bits)
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5'
* Direction resolution: 1' (9 bits)
* Power supply: 2.7 V to 35 V DC
* Electrical consumption: 2.6 mA Avg. @ 12 V
* Op. temp. without icing: -15'C to +55'C

SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Description
SONIC-ANEMO-SDI is made from the CV7-V to which a SDI12 protocol and optimizing electrical consumption has been added. Sample rate is 2 Hz.
This ultrasonic wind sensor operates in a request-response mode.
This product is more energy-efficient than standard units.
The SONIC-ANEMO-SDI is dedicated to meteorological applications.

SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Available data:
- Average speed and direction over 10 minutes
- Minimum wind speed and direction for that period
- Maximum wind speed (gust 3s) and direction for that period
- Software version and serial number
- Data measurement quality rate from the sensor
- Data for sensor diagnostic (manufacturer use only)

SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Specification:
* Output rate: 2 Hz / 30 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5'
* Direction resolution: 1'
* Power supply: 2.7 V to 35 V DC
* Electrical consumption: 2.9 mA Avg. @ 12 V
* Op. temp. without icing: -15'C to +55'C

-

WQ201 pH Sensor Description
WQ201 pH Sensor is a rugged and reliable water pH measuring device. The pH transmitter is mounted on 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The sensor's output is 4-20 mA with a three-wire configuration. The WQ201's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. The unit also uses a removable shield and replaceable pH sensor element for easy maintenance.

WQ201 pH Sensor Features
* Submersible pH measurements
* Fully encapsulated electronics
* 4-20 mA output
* Marine grade cable with strain relief
* Stainless steel housing
* Replaceable pH element

WQ201 pH Sensor Applications
Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications.

WQ201 pH Sensor Specifications
* Output: 4-20 mA
* Range: 0 to 14 pH
* Accuracy: 2% full scale
* Maximum Pressure: 40 psi
* Operating Voltage: 10 to 30 VDC
* Current Draw: 5.5 mA plus sensor output
* Operating Temperature: 23 to +131'F (-5 to +55'C)
* Warm-up Time: 3 seconds minimum

IMR EX610 SMART Sensor Gas Detector MAIN FUNCTION AND FEATURES
* SMART sensor module, easy for replacement and maintenance
* Intrinsically safe design
* Wide screen LCD
* High / Low alarm adjustable
* Calibration level adjustable for each calibration
* Combustible gas channel with high-concentration protection function
* Low-voltage alert
* Internal memory storage of measurements (10,000 records)
* Data upload to PC
* Audible, visual and vibration alarm
* Self-test power on
* Self-diagnostic and self-correction function

IMR EX610 SMART Sensor Gas Detector TECH SPECIFICATIONS
* Target gas: combustible gas, toxic gas, Oxygen
* Detecting method: Natural diffusion
* Response Time:
Semi-conductor, Catalytic, Thermal Conductivity t 90 < 30s
Oxygen, Carbon Monoxide, Hydrogen Sulfide t 90 < 30s
Other Sensors t 90 < 120s
* Working Conditions:
Combustible Gas: -40'C ~ 70'C
Toxic Gas: -20'C ~ 50'C
Working humidity â?¤ 95%RH non-condensating
* Power Source: Lithium battery (DC3.7V 1800mAh)
* Charging time: 4 ~ 6hours
* Continuous working time:
â?¥ 8 hours (for combustible gas and toxic gas)
â?¥ 300 hours (for toxic gas under temperature of 20'C)
* USB connectivity for data transfer
* Explosion-proof grade: Exia II CT4
* Ingress protection: IP66
* Dimensions: 108.4mm x 61mm x 36mm
* Weight: about 191g

Fsm-10h-01 pre-calibrated module for lpg gas
Fsm-10h-01 is pre-calibrated module for lpg gas alarm which applies tgs2610-d00 sensor together, it features durability and stability. The module outputs pwm signal which is proportional to lpg gas concentration (the module has a memory which is stored with factory calibration data), also is capable of detecting sensor wire breakage and short. The module can operate at wide temperature from -10~70'c.

Furthermore, the unit is less sensitivity to vocs gas, it immunes poison by silicon compounds, it suits to work at rugged environment.

Fsm-10h-01 combustible gas sensor module features
* pwm, usart digital output proportional to gas concentration
* maintain free
* compact size, low cost
* meets rohs requirement

Fsm-10h-01 combustible gas sensor module applications
* detect flammable gas leakage
* flammable gas leakage detector
* industrial detector

Fsm-10h-01 combustible gas sensor module specification
* gas sensor: tgs2610-d00(semiconductor)
* detection range: 0 ~ 4, 000ppm h2
* error: â± 300ppm
* response time (t90): â?¤30s
* operation temperature: -10'c ~+70'c
* operation humidity: 20~95%rh(no condensing)
* input voltage (vin): 5.0â±0.2v dc
* power consumption: â?¤1.5w

PSC-SSS (Smart Small Sensor)
Precise non-contact temperature measurement from -50'C to 975'C

PSC-SSS-LT Infrared Temperature Sensor Description
The PSC-SSS IR temperature sensor series is a highly versatile low cost solution for reliable temperature measurement. It features a temperature range of -50 to 1800'C which is fully scalable by an operator via programming keys, or by use of the included, no cost PSC Connect software. Other IR sensor parameter adjustments include peak picking, valley hold, average, and extended hold function with threshold and hysteresis.

The sensor head can be installed in higher ambient temperature, and a full line of rugged industrial accessories is available for its protection and optimum operation. Its small size facilitates temperature measurement in not easily accessible areas and simplifies integration into existing manufacturing systems. All PSC-SSS Sensors feature a choice of outputs including 4 to 20 mA, thermocouple, and linear voltage. Optional digital outputs include USB, RS-232, RS-485, CAN, Profibus DP and Ethernet. Programmable functional inputs for external emissivity adjustment, ambient temperature compensation and trigger reset of hold functions are provided.

PSC-SSS-LT Infrared Temperature Sensor Features
* One of the smallest infrared sensors worldwide with 22:1 optical resolution
* Rugged and usable up to 180'C ambient temperature without cooling
* Separate electronics with easy accessible programming keys and LCD backlit display
* Selectable analog output: 0/4-20 mA, 0-5 V, 0-10 V, thermocouple type K or J
* Optional USB, RS485, RS232 interface, relay outputs (2 x optically isolated), CAN-Bus, Profibus DP, Ethernet
* Installation of up to 32 sensing heads

PSC-SSS-LT Infrared Temperature Sensor Specifications
* Temperature Range: -50 to 975'C
* Spectral Response: 8 - 14µm
* Optics Type: Laser Accessory
* Min. Spot Size: 1.2 mm
* Response Time: 150 ms
* Power Supply: 8-36 V DC
* Environmental rating: IP 65 (NEMA-4)
* Relative humidity: 10 - 95%, non condensing

Mb1043 hrlv-maxsonar-ez4
High performance ultrasonic rangefinder

Mb1043 hrlv-maxsonar-ez4 ultrasonic rangefinder product description
The hrlv-maxsonar-ez4 is the narrowest beam width sensor that is also the least sensitive to side objects offered in the hrlv-maxsonar-ez sensor line. The hrlv-maxsonar-ez4 is an excellent choice when only larger objects need to be detected.

Mb1043 hrlv-maxsonar-ez4 ultrasonic rangefinder product specifications
* resolution of 1mm
* 10hz reading rate
* 42khz ultrasonic sensor measures distance to objects
* rohs compliant
* maximum range of 5000 mm (195 inches)
* operates from 2.5v-5.5v
* low 3.1ma average current requirement
* operational temperature from -0'c to +65'c

Mb1043 hrlv-maxsonar-ez4 ultrasonic rangefinder features and benefits
* best noise tolerance of the hrlv-maxsonar-ez sensors
* most noise tolerant acoustic sensitivity
* ignores some small targets and medium targets
* detects most large targets to long distances
* narrow beam width

Mb1043 hrlv-maxsonar-ez4 ultrasonic rangefinder applications and uses
* large target detectio

Thin-film Humidity Sensing Element SH

* Low cost
* Wide T/RH operating zone
* Operating temperature up to 200'C
* Excellent sensibility
* Very good dynamic properties
* Short response time
* Long-term stability

The SH relative humidity sensing element consists of a system of electrodes on a glass-ceramic substrate, covered by a humidity-sensitive polymer coating and a water-vapor permeable metallic membrane. This coating system represents a humidity-dependent capacitor. Utilizing the principal of capacitive measurement, SH measures relative humidity in air or other non-aggressive gas es and gas mixtures with good long-term stability and linearity, small hysteresis, and excellent dynamic response.

RH/T Probe for Handheld Meters RHA

* Low cost
* Voltage output signal
* Built-in temperature sensor available
* May be used with H5800 handheld meter or separately
* Compact and convenient in use
* Fast connection

Using thin-film sensor, whose capacitance varies proportionally to medium relative humidity, RHA measures relative humidity of air and non-aggressive gases at normal ambient pressure and converts it into standard voltage signal. Based on the RHT transducer, but with its electronics fitted into a cylindrical body, this probe is especially suitable for fast measurements in combination with handheld humidity measuring devices that feature programmable or scalable input. Furthermore, a platinum temperature sensor may be built in the probe for simultaneous medium temperature measurement.

Through its flexible cable with miniature connector, the RHA probe can be easily connected to a H5800 meter to form a lightweight multifunctional and widely applicable device for handheld relative humidity measurement.

TS418-1N426 Thermopile Infrared Sensor SPECIFICATIONS
* Thermopile IR-Sensor
* Filter for NDIR CO2 Gas Detection
* Single Element
* Very High Signal
* Flat Filter
* Small Package
* Accurate Reference Sensor

TS418-1N426 Thermopile Infrared Sensor DESCRIPTION
Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output.

TS418-1N426 Thermopile Infrared Sensor FEATURES
* Very High Signal
* Accurate Reference Sensor
* 4.26µm Narrow Band Pass
* Small TO-18 package

TS418-1N426 Thermopile Infrared Sensor APPLICATIONS
* NDIR CO2 Gas Detection

NX1 CiTiceL Nitric Oxide Sensor (NO Sensor) Key Features & Benefits:
* Designed for Automotive Applications
* Fast Response

Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module description
Quickly integrate hydrogen sulfide sensing into your system with very low power consumption and a simple analog sensor signal output.

The ulpsm converts the hydrogen sulfide sensors linear current signal output to a linear voltage signal, while maintaining the sensor at its ideal biased operation settings.

Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module benefits
0 to 3 v analog signal output
Low power consumption < 45 uw
Fast response
On-board temperature sensor
Easy sensor replacement
Standard 8-pin connector

Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module applications
Fixed industrial safety monitoring
Portable industrial safety monitoring
Portable personal safety monitor
Indoor air quality monitoring
Outdoor air quality monitoring
Bad breath/halitosis sensing

Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module performance characteristics
Measurement range: 0 to 50 ppm
Lower detection limit: 0.3 ppm
Resolution: 0.15 ppm
Accuracy: < â± 2 % of reading
Response time t90: < 30 seconds
Power-on stabilization time: 60 minutes recommended

4nd citicel nitrogen dioxide sensor key features & benefits
, industry leading reliability
, improved performance variability

4nd citicel nitrogen dioxide sensor application
Industrial safety: sensors for portable gas detectors used in industrial hygiene and confined space entry.

4nd citicel nitrogen dioxide sensor performance characteristics
, nominal range: 0-20 ppm
, expected operating life: two years in air
, output signal: 0.6 , ± 0.15 ua/ppm
, resolution: 0.1 ppm
, repeatability:

Nh3-3e100se ammonia sensor nh3 sensor description
Nh3-3e100se ammonia sensor, 3 electrode sensor; available in mini, classic, 4-series and 7-series formats.

Nh3-3e100se ammonia sensor nh3 sensor features
Amperometric 3 electrode sensor cell
Very stable zero reading
Very selective
Highly sensitive
Hydrous electrolyte

Nh3-3e100se ammonia sensor nh3 sensor typical applications
Tlv-monitoring, leakage detection
Portable & fixed point applications
Food & refrigeration industry, general industry, semiconductor industry

Nh3-3e100se ammonia sensor nh3 sensor technical specifications
Measuring range: 0-100 ppm
Sensitivity range: 130 na/ppm â± 30 na/ppm
Resolution at 20â°c: < 1 ppm
Linearity: < 10% full scale
Operation temperature range: -20â°c to +40â°c
Operation humidity range, : 15-90% r.H, non-condensing

Sg01l-5lens
Concentrator lens sic based uv photodiode avirtual = 55 mm2

Properties of the sg01l-5lens uv photodiode
Broadband uva+uvb+uvc, ptb reported high chip stability, for flame detection
Radiation sensitive area a = 55 mm2
To5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
10âµw/cm2 peak radiation results a current of approx. 700 na

Sg01l-5lens uv photodiod specifications
Sensitive area: 55 mm2
Dark current: 3.5 fa
Capacitance: 250 pf
Responsivity range: 221 - 358 nm
Operating temperature: -55 ~ +170â°c
Storage temperature: -55 ~ +170â°c
Soldering temperature (3s): 260â°c
Reverse voltage: 20 v

Spd005gasmd 5 psi gauge pressure sensor with analogue output description
This pressure sensor has an amplified analogue output. The sensor is compensated for offset, sensitivity, temperature drift and nonlinearity.

The sensor is available in the range from 5 to 100 psi. Other ranges on request. Available in gauge and absolute type. The output is ratiometric to the power supply voltage. 5 v power voltage the output span is 0.5 to 4.5 v. The spd analogue series can be considered as an "analogue" successor of the spd series.

Spd005gasmd 5 psi gauge pressure sensor with analogue output electrical characteristics
Performance characteristic at vcc =5v excitation 25â°c.
Supply voltage: 4.75~5.5v
Supply current: max. 3ma
Pressure range: 0~5psi
Accuracy: â±1.8%fs
Operating temâ??perature: -20~85c
Storage temperature: -40~125c

CV7-OEM Ultrasonic Wind Speed Sensor Description
CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption.

With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and installations. It is powered by 8-30 VDC power supply and it outputs RS232/RS422/NMEA0183 signal.

CV7-OEM Ultrasonic Wind Speed Sensor Specification:
* Output rate: 2 Hz / 30 Hz measurement or *4 Hz / 60 Hz meas.
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +55 degree C

-

CV7-E Ultrasonic Wind Speed Sensor Description
The CV7-E is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The CV7-E is powered by 8-30 VDC power supply and it outputs RS232 / RS422 / 5 V level signal / NMEA0183.

The CV7-E shows a data rate twice faster than the CV7 and CV7-V with a data output 4 per second.
The small size of this sensor makes it very discreet.
Like every LCJ Capteurs products, CV7-E is energy efficient.

CV7-E has proved its value with universities â??laboratories, scientific and wind tunnels successful tests.

It can be used connected to a PC and to any system featuring a NMEA® input port.

CV7-E Ultrasonic Wind Speed Sensor Specification:
* Output rate: 4 Hz / 60 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +50 degree C

-

Y511-A Turbidity Sensor Description
Automatic cleaning turbidity sensor is complied with ISO 7027 Turbidity Standard. The turbidity sensor can be deployed in-situ and provide very stable data over long period of usage, which helps to ensure the quality of your measurements.

Y511-A Turbidity Sensor Typical Applications
Water quality monitoring, waste water testing, process water and aquaculture monitoring.

Y511-A Turbidity Sensor Features
* 0.1~1000 NTU
* Accuracy

-

IRceL CH4 NDIR CH4 Sensor Description
Miniature infrared sensor with on-board EEPROM and thermistor

IRceL CH4 NDIR CH4 Sensor Key Features & Benefits:
* Integrated thermistor for accurate temperature compensation
* EEPROM programmed with sensor specfic performance characteristics
* Compact Size

IRceL CH4 NDIR CH4 Sensor Technical Specifications
* Operating Principle: Non-Dispersive Infra-Red
* Measurement Range: 0-5% vol. Methane
* Accuracy (-20'C to +50'C): Within ± (0.1% vol CH 4 + 4% of concentration)â??
* Response Time (T90): < 35 Seconds
* Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration
* MTBF: > 5 years


-

MICROceL CF Carbon Monoxide Sensor (CO sensor) Description
MICRO 3-electrode carbon monoxide sensor with inboard filter.

MICROceL CF Carbon Monoxide Sensor (CO sensor) Key Features & Benefits
* A robust carbon monoxide sensor suitable for portable life safety applications
* Extremely small size

MICROceL CF Carbon Monoxide Sensor (CO sensor) Technical Specifications
* Operating Principle: 3-electrode electrochemical
* Measurement Range: 0-500 ppm CO
* Sensitivity: 0.045 ± 0.01 uA/ppm
* T50 Response Time:

-

MB7040 I2CXL-MaxSonar-WR
High Performance Ultrasonic Precision Rangefinder

MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Description
Weather Resistant (IP67) Sensors, and Optional Chemical Resistance
The industrial outdoor I2CXL-MaxSonar-WR sensors have a robust PVC housing designed to meet IP67 water intrusion. The sensors provide short to long distance detection and ranging with a narrow beam pattern. The I2CXL-MaxSonar-WR outdoor ultrasonic sensors have high power output, noise rejection, auto calibration, and factory calibrated beam patterns.

In addition to the standard I2CXL-MaxSonar-WR, has developed the Fâ??Option for additional protection necessary in a few hazardous chemical environments. Extremely corrosive gases or liquids can degrade or compromise the operation of the sensing unit. As a result, we offer a more chemically inert seal which allows our sensors to operate in all but the harshest of chemical environments. In addition to the chemical resistance the sensor has improved performance in wet or dust environments.

MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Specifiations
* Resolution of 1 cm
* Up to 40Hz reading rate
* RoHS Compliant
* Operates from 3.0-5.5V
* IP67 rated, I2C interface ultrasonic sensor
* Maximum range of 765 cm (300 inches)
* Operational Temperature from -40'C to +70'C

MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Features and Benefits
* Low power consumption
* Narrow, controlled beam
* Easy to use interface
* Detects smaller objects
* Can be powered by many different types of power sources

MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Applications and Uses
* People detection
* Security
* Motion detection
* Useable with battery power
* Autonomous navigation
* Educational and hobby robotics
* Collision avoidance

-

WQ730 Turbidity Sensor Description
WQ730 Turbidity Sensor is a highly accurate submersible instrument for in-situ environmental or process monitoring. Applications for the WQ730 include: water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, and effluent and industrial control.

WQ730 Submersible Water Quality Sensor Turbidity Sensor Features
* 4-20 mA output
* Marine grade cable with strain relief
* In-situ turbidity measurement
* Simple and convenient to use
* Rugged stainless steel and Delrin sensor housing

WQ730 Turbidity Sensor Specifications
* Range: 0-50 NTU and 0-1000 NTU
* Accuracy: +/- 1% of full scale
* Meter Resolution: 12 bit
* Output: 4-20mA
* Operating Voltage: 10-36 VDC at 40 MS
* Current Draw: 30 mA plus sensor output
* Warm Up Time: 5 seconds minimum
* Operating Temperature: 14 to 122'F (-10 to +50'C)
* Maximum Pressure: 30 psi

Wq-fdo optical dissolved oxygen sensor description
The wq-fdo optical dissolved oxygen transmitter is an instrument designed for measuring dissolved oxygen concentrations in liquids. The wq-fdo optical dissolved oxygen transmitters were developed to meet different requirements ranging from surface water monitoring programs to harsh waste water applications. The optical dissolved oxygen transmitter has been specifically designed to meet the demanding requirements of the environmental monitoring and scientific research sectors, providing long term, accurate and reliable dissolved oxygen measurement. The wq-fdo optical dissolved oxygen transmitter has extremely low power requirements and a 4-20 ma output making it ideal for incorporation into remote environmental monitoring installations.

Wq-fdo optical dissolved oxygen sensor features
* extremely fast and precise optical do sensor - outstanding for field and lab applications
* proven green light technology for long operation life of sensor
* beveled membrane repells interference that can be caused by air bubbles
* universal protective armoring available
* low power consumption and low maintenance
* simple to integrate and operate
* one year sensor life

Wq-fdo optical dissolved oxygen sensor applications
Long and short term monitoring for streams, rivers, lakes, aquaculture, thermocline profiling, industrial outfalls, wastewater, scientific research, homeland security, the food and wine industry, and more.

Wq-fdo optical dissolved oxygen sensor specifications
* dissolved oxygen accuracy: +/- 0.5 % of value
* dissolved oxygen repeatability: 0.01 ppm,
* temperature, accuracy: +/-0.2'f (+/-0.1'c),
* temperature, resolution:, 0.02'f (0.01'c),
* temperature, range: 32 to 122'f (0 to 50'c,
* max pressure: 35 psi (25m/82ft water depth),
* operating voltage: 10-30 vdc,
* warm up time: 6 sec. Min, 8 recommended,

Mfm2040u digital gas flow sensor description
Mfm2000 series is a gas flow sensor with low pressure drop capable of measuring medical gases up to 45 lpm. It is configured to be customizable with different flow inlet and outlet configurations.

Mfm2040u digital gas flow sensor features
* flow range: 0.04 to 40 slm
* operating temperature range: -40 to 85'c
* resolution: 15bit
* sampling time: 7.5ms
* low pressure drop flow sensor
* high accuracy +/-2.5% reading
* calibrated and temperature compensated for air
* low power consumption
* digital i2c
* made for medical applications
* calibrated for air, and o2

Dissolved Oxygen Meter Kit

Reliable DO readings at a reasonable price.
Measures dissolved oxygen to determine water quality in environmental testing, labs, industrial and municipal waste water, aquariums and fish hatcheries. The back-lit display simultaneously displays dissolved oxygen (in % or mg/L) and temperature readings (in 'C or 'F). Automatic temperature compensation as well as manual compensation for salinity and altitude (all factors affecting DO readings). Features simple one-button calibration to air. DO probe heads include built in membranes and screw on and off for easy replacement. Also functions as a pH, ORP, Conductivity, TDS or Salinity meter when used with the optional probes. Comes in a hard carrying case complete with DO probe, 2 spare probe heads, electrolyte, instructions and a 9V battery.
EPA Equivalency Method: 360.1 and Alpha Method 2580.1992.

AM2315 Digital Temperature and Humidity Sensor Product Overview
AM2315 humidity capacitance is a digital temperature and humidity module contains a digital IIC output has been calibrated temperature and humidity combined sensor. It uses a dedicated digital module acquisition techniques and temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages.

AM2315 Digital Temperature and Humidity Sensor Product Features
â?¢ Fully calibrated
â?¢ Digital signal output
â?¢ Ultra-low power
â?¢ Excellent long-term stability
â?¢ Standard single-wire output

AM2315 Digital Temperature and Humidity Sensor Applications
HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, appliances, humidifiers, medical, weather, and other relevant humidity detection control.

AM2315 Digital Temperature and Humidity Sensor Product Highlights
Ultra-low power, transmission distance, fully automated calibration, using capacitive humidity sensor, completely interchangeable, standard digital single-bus output, excellent long-term stability, high precision temperature measurement devices.

AM2315 Digital Temperature and Humidity Sensor Sensor Performance
* Humidity range: 0~99.9%RH
* Temperature range: -40 ~ +80 deg C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy: ±0.3 deg C
* Humidity Repeatability: ±0.1%RH
* Temperature Repeatability: ±0.2 deg C
* Service voltage: 3.3V to 5.5V
* Output signal: IIC

Clean CAP Wireless Ultrasonic Fill-Level Sensor

Do more with less, smarter, greener, and more efficiently than ever.

Reduce your waste collection costs by up to 50% with our smart IoT-based waste bin sensors and monitoring solution. It only requires three steps:
1. Read fill-level information
Clean CAP smart waste bin sensor is compatible with any type of container installation to monitor any type of subtance or waste in real-time.

2. Optimize collection routes
CCN's route optimization and predictive analytics provide insightful historical data to generate the best routes and estimate the time of containers becoming full.

3. Collect the garbage
With CCN, you can plan ahead how collections are implemented, targeting only the locations with full trash bins.

Clean CAP Wireless Ultrasonic Fill-Level Sensor Product features
1. Can be attached to any type of bin, container, or tank
Clean CAP fill-level sensor can be mounted on any type of bin, container, or tank. If the container is made of plastic, the device can be mounted by screwing. For steel containers, Clean CAP can be fixed to the container's lid using brackets.

2. Senses both solid and liquid materials
Clean CAP's ultrasonic sensor enables it to detect both solids (general waste, paper, glass, e-waste, textile, etc.) and liquids (oil, sludge, agriculture products, etc.). The range of distance can vary between 30 cm - 400 cm (4 m / 13 ft).

3. Communicates wirelessly with monitoring platform
Clean CAP sends real-time information to Clean City Networks monitoring and data-analytics platform through wireless data transmission using 2G/3G networks. The software enables our customers to optimize their waste collection operations through data-driven decision making.

4. Designed for extreme environments and durability
Clean CAP has been tested to push the limits of its operability in conjuction with its battery life. It is completely enclosed and protected against dust and water, has a battery life of up to 10 years, and can operate in temperatures from -30 deg C (-22 deg F) to 80 deg C (176 deg F).

Clean CAP Plus Wireless Ultrasonic Fill-Level Sensor Basic specifications
* Power: 3.6V high performance lithium battery
* Size (H x W x L): 95mm x 96mm (3.74in. x 3.8in.)
* Net weight: 470g (1.04 lbs.)
* Battery life: Up to 10 years

DHT11 Temperature and Humidity Sensor Module Product Overview
DHT11 digital temperature and humidity sensor is a calibrated digital signal output of the temperature and humidity combined sensor. It uses a dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit micro-controller connected.

DHT11 Temperature and Humidity Sensor Module Applications
HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, weather stations, home appliances, humidity regulator, medical and other relevant humidity measurement and control.

DHT11 Temperature and Humidity Sensor Module Product Highlights
Low-cost, long-term stability, relative humidity and temperature measurement, excellent quality, fast response, anti-interference ability, long distance signal transmission, the digital signal output, precise calibration.

DHT11 Temperature and Humidity Sensor Module Specifications
* Humidity Range: 5~95%RH
* Humidity Accuracy: ±5%RH
* Humidity Hysteresis: < ±0.3%RH
* Temperature Range: -20~+60 deg C
* Temperature Accuracy (25°C): ±2 deg C
* Temperature Repeatability: ±1 deg C
* Power supply: DC 3.3 ~ 5.5V
* Output signal: Single

MH-Z19B NDIR Infrared CO2 Sensor Module Applications
MH-Z19B NDIR infrared gas module is widely used in
* HVAC refrigeration
* Indoor air quality monitoring.
* Smart home appliances
* School
* Air cleaner

MH-Z19B NDIR Infrared CO2 Sensor Module Technical parameters
* Main Functions and Features
* High sensitivity, high resolution
* Low power consumption
* Output modes: UART and PWM wave
* Temperament compensation, excellent linear output
* Good stability
* Long lifespan
* Anti-water vapor interference
* No poisoning

MH-Z19B NDIR Infrared CO2 Sensor Module Technical Parameters
* Target Gas: CO2
* Working voltage: 4.5~ 5.5 V DC
* Average current: < 60mA(@5V)
* Peak current: 150mA (@5V)
* Interface level: 3.3 V(Compatible with 5V)
* Preheat time: 3 min
* Response Time: T90 < 120s
* Working temperature: 0 ~ 50 deg C
* Working humidity: 0~ 90% RH (No condensation)

HR202L Humidity Sensitive Resistor Product Overview
HR202L humidity resistance is the use of a new type of organic polymer materials moisture sensitive components, with a sense of wide humidity range, fast response, strong anti-pollution, no heat cleaning and long-term stable and reliable performance, and many other features.

HR202L Humidity Sensitive Resistor Applications
Display for temperature and humidity meter, temperature and humidity gift table, atmospheric environmental monitoring, industrial process control, agriculture, measuring instruments and other applications.

HR202L Humidity Sensitive Resistor Product Highlights
Compact and handsome appearance, good long-term stability, wide temperature and humidity measuring range, high and low temperature and humidity measurement accuracy.

HR202L Humidity Sensitive Resistor Parameters
* Fixed Voltage: 1.5V AC (Max, Sine wave)
* Fixed power: 0.2mW (Max, Sine wave)
* Operating Frequency: 500Hz ~ 2kHz
* Temperature: 0 ~ 60 deg C
* Humidity:

NAP-66A is mainly used for gas detectors and leak testers. NAP-66A is a half in height and needs a half in power consumption compared to existing sensor so that thinner and lighter-weight detectors can be produced. The following are the basic characteristics but it is recommended to refer to the individual users manual for further information.

* Target gases and concentration
Propan(C3H8): 0.03~ 2.2% (0.03~ 1%)
Iso-butane(Iso-C4H10): 0.03~ 1.8% (0.03~ 0.8%)
Hydrogen(H2):0.05~ 4% (0.05~ 1.5%)
Ethanol(C2H5OH): 0.05~ 3.2% (0.05~ 1.5%)
Hydrocarbons(CnH2n+2): 1~100% LEL (1~50%LEL)
( ) is a detection range in high accuracy

* Ratings
Supply Voltage:
DC 2.0 ± 0.2V
AC 2.0 ± 0.2V (r.m.s. 50~60Hz)
Current (When 2.0V is applied):
DC 140 ~ 160mA
AC 140 ~ 160mA (r.m.s. 50~60Hz)
Ambient Temperature:
In operation -10 ~ +50
In storage -10 ~ +50
Ambient humidity:
In operation 95ï¼?RH or less
In storage 99ï¼?RH or less (No dew condensation)

AC/DC Operated Carbon Monoxide Alarm (CO Alarm) VST-C598IH FEATURES AND BENEFITS
* AC/DC operated carbon monoxide alarm
* Non-radioactive technology for environmental friendly
* CO concentration threshold:
varying time-to-alarm depending on concentration
* With quick fix mounting bracket for easy installation and simple AC connector for easy installation
* Fitting and battery tamper resist feature
* Inter-connectable up to 40 CO, Heat And/Or Smoke Alarms
* 3 color LED indicator (Fault and Alarm and AC power indicator)
* Low-battery and battery missing warning indicator
* Hush/Test button
* Auto-reset when CO clears
* CE approved, comply with EN50291-1:2010

AC/ DC Operated Carbon Monoxide Alarm (CO Alarm) VST-C598IH PRODUCT SPECIFICATIONS
Model Number: VST-C598IH
Power Source: 220-240V AC 50Hz and 9V DC Battery back-up
Electrical Rating:
MAINS POWER:
Operating voltage : 220-240VAC, 50Hz
Operating current (Max.): 60mA
BACKUP BATTERY:
Operating voltage : 9VDC
Operating current (Max.) : 15uA (standby); 20mA (alarm)
CO sensitivity:
At 50 ppm, unit must alarm within 60 ~ 90 min
At 100 ppm, unit must alarm within 10 ~ 40 min
At 300 ppm, unit must alarm within 3 min
Maximum Hush Time: 4 min
Alarm Sound Level: 85 decibels at 1 meter
Detection Type: Electrochemical
Operation Temperature: 5'C to 38'C
Ambient Humidity: 15% to 90% Relative Humidity

SD12 Standalone Photoelectric Smoke Alarm Key Features:
* Worry-free! 10-year battery life
* Advanced photoelectric sensing technology offers high sensitivity
* Auto-check malfunction
* Low battery warning
* Manual Test & Auto-Reset

SD12 Standalone Photoelectric Smoke Alarm Specifications:
* Sensor Type: Photoelectric
* Alarm Sound: >85dB (3)
* Power Supply: DC 3V lithium battery (included)
* Power Supply Life: 10 years
* Alarm Current:

Sc05e smoke and co alarm key features:
* smoke & carbon monoxide dual detection
* advanced photoelectric sensor, mcu auto-processing technology
* strong anti-interference ability
* distinctive smoke & co alarm sounds
* low battery warning
* auto-check malfunction in smoke chamber
* test/silent button
* dustproof, mothproof, shockproof & anti-visible light

Sc05e smoke and co alarm specifications:
* sensor type: photoelectric
* alarm sound: >85db (3m)
* power supply: dc 3v lithium battery (included)
* power supply life: 5 years
* alarm current:

SD13 Smoke Alarm Key Features:
* Worry-free! 10-year sealed-in lithium battery
* Advanced photoelectric sensing technology offers high sensitivity
* Auto-check malfunction
* Low battery warning
* Manual Test & Auto-Reset
* Dustproof, mothproof & Anti-visible light
* Anti-RFI (20V/M-1GHz)

SD13 Smoke Alarm Specifications:
* Sensor Type: Photoelectric
* Alarm Sound: >85dB (3meter)
* Power Supply: DC 3V lithium battery (included)
* Power Supply Life: 10 years
* Alarm Current:

ETO-B1 Ethylene Oxide Sensor ETO Sensor Description
Alphasense is expanding its line of electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.

Ethylene Oxide (C2H4O)
The ETO is a general purpose sensor, primarily developed for monitoring Ethylene Oxide but also capable of measuring other volatile organic compounds (VOCs). Our toxic evaluation board allows easy adjustment of the bias voltage to optimise this sensor for the required application.
See application note AAN113.
Available in A and B series

ETO-B1 Ethylene Oxide Sensor ETO Sensor Specifications
* Sensitivity: 2000 to 3200 nA/ppm in 20ppm EtO
* Response time t90: < 200s from zero to 20ppm EtO
* Range: 100 ppm EtO limit of performance warranty
* Resolution: < 0.1 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* â??Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 13g

Matched Transmitter board for ETO-B1 ETO Sensor
4-20mA Digital Transmitter Board
* Factory calibration, custom-set for immediate use
* Digital zero, sensitivity and temperature compensation
* Digital and 4-20mA output
* Biased or unbiased operation
* Calibration and range change

UM0090 Ultrasonic Rangefinder Introduction
The UM0090 module is based on an ultrasonic sensor that combines transmitter and receiver in a single unit. By measuring the time of flight of ultrasonic wave, it can detect any object within 3 meters and output distance signals via UART interface.

This product features high sensitivity, fast response, and excellent anti-interference ability and stability. It is widely applied in object avoidance systems on robots, drones, and other smart devices.

UM0090 Ultrasonic Rangefinder Features
* Compact design for easy installation
* Measuring range up to 3M
* Excellent anti-interference ability
* Can detect objects of various colors, shapes and materials

UM0090 Ultrasonic Rangefinder Applications
* Robots
* Smart streetlight
* Smart trash bin
* Autonomous delivery vehicle

UM0090 Ultrasonic Rangefinder Technical Parameters
* Measuring range: 17300cm (object: flat surface)
* Frequency: 58kHz
* Resolution:

Point Combustible Gas Detector

BJ-86-3A Combustible Gas Detector Detection of gas:
Liquefied natural gas
Other

BJ-86-3A Combustible Gas Detector Technical Parameters
* Detection of gas: Liquefied natural gas
* Detection method: FIGARO semiconductor gas sensor
* Power sourceâ??: DC24V 15%
* Power consumption: 2.5W or less
* Alarm: red light, the alarm sound over 70dB
* Temperature: -10 ~ 55'C

MF5600 Series Detachable Display Gas Flow Meters General description
MF5600 series mass flow meters are specially designed for applications where the display isoften required to be placed separated away from the flow channel or meter body, such as theoxygen metering system in a hospital. These meters are opted with the standard industrialuser interfaces (RS485 and 4 ~ 20mA), and user defined alarm functions for better monitoringor control over the network. The off-the-shelf products (MF5612 and MF5619) are for gasflow measurement of 0 ~ 300 SLPM and 0 ~ 800 SLPM, respectively.

MF5600 Series Detachable Display Gas Flow Meters Features and Applications
- Detachable display that can be placed away from the flow channel via a specially designed cable
- Standard 4 ~ 20 mA or RS485 for remote data communication
- Hygienic stainless steel body ready for oxygen metering
- Extended rangeability for accurate flow monitoring and control
- Intrinsic safe enclosure

MF5600 Series Detachable Display Gas Flow Meters Specifications
* Flow Range:
- MF5612: 0.3 ~ 200, 300 SLPM
- MF5619: 0.8 ~ 600, 800 SLPM
* Turn-down Ratio: 30:1
* Accuracy: ±(1.5+0.5 FS)%
* Repeatability: ±0.5%
* Max. Pressure: 1.0 MPa
* Operating Tenperature: -10 ~ +55'C
* Output: 4~20 mA; RS485; Pules

TSP-16 Series Indoor Air Quality Monitor
--- Designed for hotels, houses and other public places to detect the indoor air quality

* Experienced in designing IAQ product for 12 years, long term exportation to Europe and America, powerful performance guaranteed
* Real-time detecting indoor PM2.5/PM10, CO2, TVOC, Temperature and relative humidity
* Built-in self-owned patent measurements of temperature and humidity compensation technology
* Suitable for hotels, residential projectsto analyze indoor air quality, and to control ventilation systems, etc.
* Wall mounting, provide Modbus RS485 and WIFI optional
* Basic function of indoor air detector

TSP-16 Series IAQ Monitor Features
* IAQ detector designed for civilian use with affordable price
* 24 hours online real-time IAQ detector
* Real-time output PM2.5/PM10, CO2, TVOC and humidity data
* Using special pattern to ensure the measurement value does not effected by the surrounding
* Modbus RS485 interface and WIFI available,suitable for networks in existing and modern buildings
* OLED displays real-time data (optional)
* Indicators with three different colors to show range of IAQ density
* Wall mounting, 24VAC/VDC power supply
* With over 12 years' experience in designing IAQ products and long-term exportation to Europe and America, we provide a dozen of different types of IAQ
* Products for different applications
* RJ45 Ethernet interface product customizable

TSP-16 Series Indoor Air Quality Monitor Main Application
* Smart Home Systems
*Residential projects
* Hotels, class rooms, offices and other public places where need IAQ monitoring with civil level
*Air quality monitoring in other public places

TSP-16 Series Indoor Air Quality Monitor Specifications
* Detection Parameters: PM2.5/PM10, CO2, TVOC, temperature & humidity
* PM2.5 Measuring Range: 0~1000μg/m3
* PM10 Measuring Range: 0~1000μg/m3
* Temperature Measuring Range: 0'C ~ 50'C
* Humidity Measuring Range: 0~99%RH
* CO2 Measuring Range: 400~2,000ppm
* Measuring Range: 0~ 4.0mgâ??m3
* Operating Temperature: 0~50'C
* Operating Humidity: 0~99%RH
* Power supply: 24VAC±10%, or 12~36VDC

Stand-combustible Gas Detector

BJ-62-1A Combustible Gas Detector Detection of gas:
liquefied natural gas

BJ-62-1A Combustible Gas Detector Output:
* DC12V pulse output can be driven shut-off valve
* No output

BJ-62-1A Combustible Gas Detector Technical Parameters
* Detection of gas: liquefied natural gas
* Detection methodâ??: FIGARO semiconductor gas sensorâ??
* Alarm concentrationâ??: 25% of the lower flammable limit or lessâ??
* Power supply: AC220V ± 15%
* Power consumption: 3W or less
* Temperature: -10 ~ 55'C

GM320 Infrared Thermometer Description
This GM320 infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous or hard-to-reach objects without contact safely and quickly. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.

GM320 Infrared Thermometer Specification
* Temperature range: -50 ~ 330'C (-58~626'F)
* Accuracy: ±1.5% or ±1.5'C
* Repeatability: ±1% or ±1'C
* Distance Spot Ratio: 12:1
* Emissivity: 0.95 preset
* Resolution: 0.1'C/'F
* Response Time: 500ms
* Wavelength: 8-14μm

High temperature boiler furnace oxygen sensor
• oxygen pressure range 2 mbar - 3bar
• zirconium dioxide (zro2) sensing elements
• non-consumption technology
• integral heating element
• no need for temperature stabilisation
• no reference gas required
• high accuracy
• linear output signal
• operates with external interface boards
• 80mm, 220mm and 400mm probes available

Applications
Boiler/furnace efficiency improvement for coal/oil/gas/biomass
Continuous emission monitoring systems (cems)
Aviation - obogs and obiggs
Accelerated composting
Agriculture
Medical and laboratory equipment
Controlled atmosphere monitoring
Controlled environment transportation - perishable goods storage
Engine and mot test emissions

PSC-T54U
Infrared Pyrometer for Glass Industry Applications

PSC-T54U Non-Contact Infrared Pyrometer Description
The digital PSC-T54U is designed specifically for glass surface applications. Offering a wide temperature range from 350 to 1200'C, it is essential for thin glass surface measurement.

The robust and compact stainless steel housing ensures operation under even the most difficult ambient conditions.

With a minimum response time of only 60 ms, the PSC-T54U is ideal for fast measuring tasks and spot sizes from 5mm.

The standard 0/4 to 20 mA linear output signal allows seamless integration into existing measurement and control systems. The PSC-T54U boasts a galvanically isolated RS-485 interface and therefore is bus-compatible and uses Modbus RTU protocol.

PSC-Spot software enables simple parameter adjustment of emissivity, sub temperature ranges, response time and data storage when joined to a PC through an RS-485 to USB connection.

PSC-T54U Non-Contact Infrared Pyrometer Features
* Designed for non-contact temperature measurement of ultra-thin glass < 1mm thickness
* Temperature Range: 350 to 1200'C
* High Resolution Optics - Field of View 70:1
* Compact, Rugged Stainless Steel Housing with Protective Hardware for Harsh Environments
* Digital RS-485 and Analog 4-20mA Interfaces for Ease of Installation in Existing Measurement & Control Systems
* Worldwide Application Specialist Support

PSC-T54U Non-Contact Infrared Pyrometer Specifications
* Temperature Range: 350 to 1200'C (662 to 2192'F)
* Spectral Range: 7.8um
* Accuracy: 0.6% of Measured Value in 'C or 1K
* Reproducibility: 0.3% of Measured Value in 'C or 0.5K
* Output: 0/4 to 20 mA, Temperature Linear, Max Load 700 ohm
* Power Requirement: 24 V DC ±25%, Residual ripple 500 mV
* Power Consumption: Max. 1.5W
* Operating Temperature: 0 to 70'C (32 to 158'F)

Product Features
Integrated DFB grating provides single frequency operation
Frequency tuning can be accomplished by adjusting either laser drive current or temperature.
Tuning range up to 6 nm without mode hopping
Temperature tuning control: 0.1 nm / 'C
Drive current tuning control: 0.04 nm / mA
Typical output power range: 2-8 mW

Packaging Options
TO-39 or TO-66 package
Glass or Sapphire window with 7' slope
Hermetically sealed Integrated thermoelectric cooler (TEC)
Mounted lens for collimation
Butierfly package with fibre coupled output

Applications
Molecular spectroscopy
Industrial gas sensing (TDLAS)
Environmental monitoring

AR8200 Carbon Dioxide Detector CO2 Detector Introduction
This Carbon Dioxide detector can detect the Carbon Dioxide content between the 0~5000ppm and shows the Carbon Dioxide volume with an LCD.

The product features:
* As it uses the imported Carbon Dioxide sensor, it is very precise and its performance is stable.
* It uses the intellectualized design and has gotten multiple functions.
* With highlight backlight display and acoustic-optic alarming, it is easily configured.
* The embedded temperature compensation can make the meter measuring the correct value in the environment temperature of -10~40'C.
* As its case is ergonomically designed, it looks handsome, feels good and is easy to carry.

AR8200 Carbon Dioxide Detector CO2 Detector Applications:
* Carbon Dioxide manufacturing workshop
* Petroleum refining and petrochemical plants
* Carbon Dioxide content detecting in trains and automobiles
* Carbon Dioxide content detecting in minerals
* Carbon Dioxide content detecting during mountain climbing and in sealed place
* Other industries and plants using Carbon Dioxide.

AR8200 Carbon Dioxide Detector CO2 Detector Technical Features
â?¢ Gas Type: Carbon Dioxide (CO2)
* Measuring range: 0 to 5000ppm
* Resolution: 1ppm
* Measuring Principle: Optics
* Display: Large LCD Display
* Operation Tempearture: -10'C ~ 60'C
* Operation Humidity: 0 to 99.9% RH
* Power supply: 3 x 1.5V AA battery
* Size: 182*66*32(mm)

S509 IR CO2 Gas Sensor Characteristics:
* -40'C~+70'C wide working temperature range high precision measurement
* Sensor automatic revision, zero drift an automatic adjustment
* Immune to poisonous and harmful material, have fight poisoning efficacy
* Work without oxygen to participate in
* Using the infrared principle scattered, and long service life
* Sensor work, can output the digital quantity and analog
* Has the standard output interface, peripheral use circuit is simple

Infrared gas sensor is based on bill-LangBo law and ir theory developed, we can accurately detect methane, carbon dioxide, hydrocarbons, etc.

Sensor interior has intelligent processing chip, the gas absorption of light signal conversion into gas concentration information, and digital signal and linear output voltage signal and through the software algorithm in complex linearization and precise processing temperature and humidity compensation of gas density per second, and a time interval according to certain packet format automatically send output.

When offered 3.0VDC ~ 6.0VDC range voltage, S509 infrared sensor can be in -40'C ~ +70'C Wide temperature range normal work. The sensor to provide analog and digital output interface. The user can through the interface auto receiving gas concentration data and execution, use the function such as calibration is very simple.

S509 IR CO2 Gas Sensor Specification
* Working voltage: 3.0 - 6.0V
* Resolution: 1°FS.
* Response timeT90: 30S
* Measurement accuracy: ±3%FS
* Zero repeatability: ±1%FS
* Long-term zero drift: ±1%FS/year
* Working temperature: -40'C~+70'C
* Working humidity: 0~95%RH No condensation

4OXV CiTiceL Oxygen Gas Sensor (O2 Sensor) Key Features and Benefits:
* False alarm immunity
* Enhanced response time in extreme applications
* Reliably meets stated life
* Superior environmental performance

Carbon Monoxide Detector And Transmitter
Model#: F2000TSM-CO-C101

* Real time detect and transmit ambiance carbon monoxide level
* Up to more than five years lifetime
* 1x analog output for linear measurement
* Modbus RS485 interface
* The highest performance with the lowest price

F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Description
F2000TSM-CO-C101 is specifically designed to detect and transmit carbon monoxide level in the enclosed or semi-enclosed car parks and to regulate the environment according to the measurement of carbon monoxide. It is designed for easy installation and minimum maintenance during operation.

F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Features
* Wall mounting, real time detect CO level with measuring range of 0~100ppm/ 0~200pm/ 0~500ppm.
* Electrochemical sensor which offer several advantages over traditional electrochemicalsensors.
* With a long life, good long term stability, and high accuracy, the CO sensor is environmentally friendly without risk of electrolyte leakage.
* With simple calibration
* The special design of easy sensor's replacement makes customers replace sensor easily by themselves
* Full time CO level detection, even the slightest leak can be detected
* One analog output of the measurement of carbon monoxide concentration with 0~10V/4~20mA selectable
* Special built-in Self-Zero Correction algorithm.
* Modbus RS-485 communication with 15KV antistatic protection, also can be calibrated carbon monoxide measurement via the interface

F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Application
* Residential and commercial CO detectors and transmitters
* Ventilation control for indoor parking garages
* Recreational vehicle CO detectors
* Kitchen rooms and restaurants
* Freezing machine rooms and other places where air quality is easy to worsen

F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Specifications
* Gas detected: Carbon monoxide
* CO Measuring Range:
0~100ppm(default); 0~200ppm/0~500ppm selectable
* Response Time: Within 60 seconds
* Accuracy:

Ar820 formaldehyde gas detector introduction
Ar820 household formaldehyde gas detector, which adopts imported advanced sensors, are of excellent performance, high accuracy and stability, and are able to implement continuous real-time detection. This type of detectors can be applied in household, offices and any other dwellings.

Ar820 formaldehyde gas detector product specifications
* measurement range: 0~5.0 ppm
* resolution: 0.01 ppm
* accuracy: ±5%
* temp. Measuring range: 0'c~40'c/32'f~104'f
* temp. Resolution: 0.1'c/0.1'f
* temp. Accuracy: ±2'c
* humidity measuring range: 10~95%rh
* humidity resolution: 0.1%rh
* humidity accuracy: ±5%rh

As8900 4 in 1 muilt gas monitor introduction
The as8900 multi-gas monitor is a portable and handheld instrument that is capable to use continuously and simultaneously monitoring 4 gases: oxygen, combustile gas, carbon monoxide and hydrogen sulfide. Every gas readings all shows in one lcd display. The unit also provide user to configure high and low alarm as well as twa and stel alarms. The unit will be audio and visual alarm once the alarm condition is exceeded.

As8900 4 in 1 muilt gas monitor specifications
* range:
Oxygen (o2): 0~30%
Combustile (lel): 0~100% lel
Carbon monoxide (co): 0~999 ppm
Hyrogen sulfide (h2s): 0~500 ppm
* operating temperature: -10~ 50'c(except lel is 0 ~40'c)
* operating humidity: 15~95 % rh, typical
* size: 120.20 x 64.50 x 38.30mm
* weight: 200g

AR5750B Refrigerant/SF6 Gas Leak Detector Description
A gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave. This type of device is important because there are many gases that can be harmful to organic life.

Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion, etc. This type of device is widely used in industry and can be found in locations, such as on oil rigs, to monitor manufacture processes and emerging technologies such as photovoltaic. They may also be used in firefighting.

This rechargeable refrigerant gas detector respond to all halogenated refrigerant, but also apply to:
A. This was response to all halogenated refrigerant (including chlorine and fluoride). Including but not only limited to below:
CFCs e.g. R12, R11, R500, R503 etcâ?¦
HCFCs e.g. R22, R123, R124, R502 etcâ?¦
HFCs e.g. R134a, R404a, R125 etcâ?¦
Also can detect compound gas for example AZ-50, HP62, Mp39, etcâ?¦
B. Detect gas leaks in hospital equipments.
C. SF6 gas was detected in high voltage circuit shot cut..
D. Detect halogen gas when gas mixing with, chlorine, fluorine,bromine.
E. Detect carbon tetrachloride from the dry cleaning machine.
F. Detect the halon gas from the fire extinguisher.

AR5750B Refrigerant/SF6 Gas Leak Detector Specifications
* Detect itemâ??: All halogen gasâ??
* Sensitivityâ??: Halogen refrigerant gas 3gr / yrâ??
* Response timeâ??: Instantaneousâ??
* Warm up timeâ??: < 6 secondâ??
* Continuous operation timeâ??: 5 hours(slightly vary with operation)â??
* Operation temperatureâ??: 0 to 52 deg C( 0 to 110 deg F)
* Power supplyâ??: 2000mAh, 3.7V lithium rechargeable batteryâ??

CUPS 4.0 A Wireless and Self-powered Anemometer Description
A wireless (BLE) and self-powered (solar) anemometer

Turn your tablet / smartphone into a wind instrument and data logger with CUPS 4.0.

With our free app Sailing Anemotracker (Android, iOS), receives the data and displays real / apparent wind speed / direction and many more variables.

Lightweight and easy to install

CUPS 4.0 is really easy to install, so you can make it portable and mount it anywhere you wish. No more wires, save time and enjoy sailing right away.
Read our manual and check the technical information for helpful details about CUPS 4.0.

CUPS 4.0 A Wireless and Self-powered Anemometer Specifications
* Wind Speed Range: 0.5 to 45 m/s
* Wind Speed Resolution: ±1 m/s (±5% over 20 m/s)
* Wind Direction Display resolution: 1'
* Wind Direction Resolution: ±3'
* Operating Temp.: -20'C to +65'C
* Bluetooth Version: 4.1
* Bluetooth Range: Up to 50 m

AquaTuff Waterproof Thermocouple Instrument
Model: 35200-K

The AquaTuff 35200-K model is a high accuracy instrument designed to withstand the harsh environments in a kitchen or in food processing. The ABS housing is extremely durable and IPX7 waterproof rated. The housing is ergonomic with a tapered design and curved back to fit nicely in your hand.

The 35200-K can be used with any Type K thermocouple probe with a standard mini-connector. Cooper-Atkins offers a wide selection of probes for use in industrial and foodservice applications. Manufactured in an ISO 9001:2008 facility in the USA.

35200-K Waterproof Thermocouple Instrument Product Specifications
* LCD: Large, easy-to-read display
* Waterproof: Yes, IPX7
* Certification: CE, NSF Component, RoHS, WEEE, NIST
* Temperature Range: -100 to 999 deg F (-73 to 537 deg C)
* Temperature Accuracy: ±0.5 deg â??F (±0.3 deg â??C)
* Ambient Temperature Range: 32 to 122 deg F (0 to 50 deg C)
* Resolution: 0.1 deg/ 1deg, user selectable

MB7583 SCXL-MaxSonar-WRLST
High Performance Ultrasonic Precision Rangefinder

MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Product Description
The weather resistant SCXL-MaxSonar-WR self-cleaning sensor is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4â??inch PVC pipe fittings.

The MB7583 features a self-cleaning transducer to remove condensation and ice buildup when operating in cold conditions. The sensor accurately applies temperature compensation to every reading, using either the integrated temperature sensor or the optional external temperature sensor (HR-MaxTemp).

MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Product Specifications
* Resolution of 1-mm
* Selfâ??cleaning transducer
* 0.57Hz read rate
* 42kHz ultrasonic sensor measures distance to objects
* RoHS Compliant
* Operates from 2.7-5.5V
* Low 68mA average current requirement
* Maximum range of 10 meters (394 inches)

MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Features and Benefits
* Factory calibrated beam width
* Low operating voltages from 2.7V to 5.5V
* All range outputs are active simultaneously
* High acoustic sensitivity

MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Applications and Uses
* Autonomous Navigation
* Robot Ranging Sensor
* Bin Level Measurement
* Tank Level Measurement
* Grain Level Measurement

Datalogging Conductivity/TDS Meter

Records data in the plant or field for later computer storage and analysis
Automatically records up to 16,000 data points in the field along with time and date. These can later be downloaded to a computer via the meter's USB port and the results viewed instantly on software which comes with the unit. The software also enables real-time datalogging directly from the meter to the computer. Simultaneously displays conductivity or TDS and temperature. A user adjustable ATC coefficient enables absolute (non-temperature compensated) measurements, as well as accurate measurements in solutions other than water. Features manual or auto-range, min/max, calendar/clock, auto power off, and hold function. This well-made unit has a detachable probe, fold-out easel back, and a large, easy-to-read LCD. Comes ready to use in a protective foam-lined carrying case, complete with probe, 4 AA batteries, and one 3V button cell battery.

Dim: 8" x 3" x 1" (203 x 76 x 38 mm).
Weight: 10 oz (283 g).

LEPTON UNCOOLED DETECTOR

Single element MWIR detectors with different geometries, packaging solutions and preamplifier boards

Uncooled, high-speed operation at room temperature (1- / 2- / 3-TEC cooled options also available)

LEPTON Uncooled Detector Applications
* Gas and flame detection
* Laser detection

LEPTON Uncooled Detector Specifications
* Detector geometries: 1x1 mm2, 2x2 mm2
(ask us for custom designs or other geometries)
* Spectral response: 1 - 5 microns (peak response at 3.7 microns)
* D*(»peak) (typ): 2 x 109 Jones
* Biasing voltage (typ): 10 V
* Pixel resistance (typ): 0.8 - 1.0 M©
* Responsivity (at Vb=10 V):
1x1 mm2: 9 x 103 V/W
2x2 mm2: 4.5 x 103 V/W
* Packaging options:
Uncooled: SMD (non-hermetic) / TO-5 (hermetic)
n-TEC cooled: TO-8 (hermetic)
* Operating temperature:
SMD package (non-hermetic): 5'C ~ 70'C
TO-5 & TO-8 (hermetic): -40'C ~ 85'C
* Response time (room temperature) (typ): < 2 us
* Readout electronics: not included (see preamp modules)

SHT20 Digital Temperature and Humidity Sensor Product Summary
The SHT20 humidity and temperature sensor of Sensirion has become an industry standard in terms of form factor and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, I2C format.

SHT20 Digital Temperature and Humidity Sensor FEATURES
* Fully calibrated
* Digital output, I2C interface
* Low power consumption
* Excellent long term stability
* DFN type package - reflow solderable

QCC Quad Channel Controller Description
The QCC Quad Channel Controller offers four channel configurations for monitoring toxic, combustible and/or refrigerant gases with versatile control functionality for non-hazardous, non-explosion rated, commercial and light industrial applications. It is designed to accept inputs from up to four remote digital and/or analog transmitters using digital or 4-20 mA analog input. The QCC is available in two models, the QCC-M with Modbus RS-485 output or the QCC-B with BACnet MS/TP output for communicating with a Building Automation System (BAS).

Standard features include, three configurable SPDT dry contact relays with field configurable time delays and trigger levels, an LCD display with LED indicators for channel alarm status, relay status and fault conditions, an extensive menu system with password protection, logic control, a USB port for firmware upgrades and a door mounted, loud audible alarm that is ideal for noisy environments. Optional value added features include: an analog output module with data logging, a manual shutoff switch (meets B52 code requirements), a top mounted strobe and a water tight, door mounted audible alarm. The QCC can be connected to several remote devices such as a Remote Strobe/Horn Combo, a Remote Display Module and the LNK-AO Analog Output Peripheral Device.

QCC Quad Channel Controller Key Features
* Up to 4 channels of gas readings in any combination of analog and/or digital transmitters
* Modbus RS-485 LAN communications for controlling Peripherals
* Modbus RS-485 (QCC-M) or BACnet® MS/TP (QCC-B) WAN output for communicating with a BAS
* Optional two 4-20 mA outputs with data logging
* Three 5A SPDT dry contact relays
* 4 line, 20 character LCD display with LED indicators
* Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rating with door mounted, water tight buzzer installed.
* USB port for firmware upgrades and data logging
* RoHS compliant circuit boards
* Thermal resetting fuses

QCC Quad Channel Controller Applications
* Wastewater Treatment Plants
* Ice Arenas
* Commercial Indoor Swimming Pools
* Chiller Rooms
* Parking Garages
* ... and many more

IRt/c.01HB Infrared Temperature Sensors Features:
* Infrared Thermocouple IRt/c
* Non-contact
* Self-powered
* Intrinsically Safe
* Repeatability 0.02'F (0.01'C)
* Interchangeability ±1%
* Resolution approx. 0.0001'C
* Small Size

IRt/c.01HB Infrared Temperature Sensors Technical Data
* Sensing Range: -50 to 550'F (-45 to 290'C)
* Ambient Temperature: 0 to 160'F (-18 to 70'C)
* Field of View: approximately 1:1 (60')
* Repeatability 0.02'F (0.01'C)
* Interchangeability ±1%
* Resolution approx. 0.0001'C
* Minimum Spot Size: .3" (8mm)
* Spectral Response: 6.5 to 14µm
* Output Impedance: 3 Kohms approx
* Response Time: 100 Milliseconds