Tgs2602 For The Detection Of Air Contaminants

Air contaminants sensor tgs2602 in stock The tgs 2600 has high sensitivity to low concentrations of gaseous air contaminants such as hydrogen and carbon monoxide which exist in cigarette smoke. The sensor can detect hydrogen at a level of several ppm. Due to miniaturization of the sensing chip, tgs 2600 requires a heater current Of only 42ma and the device is housed in a standard to-5 package.

Supplier: Dehumidifier, voltage stabilizer, voltage regulator, water leak detection system, close control unit, GE UPS, industrial dehumidifier, pool dehumidifier, static transfer switch, frequency converter, desert cooler, air cooler

We offer stand-alone Environmental monitoring appliance that provides dynamic, real-time temperature monitoring, humidity monitoring for server room, Datacentre and computer rooms or any critical environment. It has following features: 1) Real time monitoring of Humidity and Temperature. 2) Includes dry contact for alarms from critical equipment include power monitoring, water sensors, smoke and fire alarms, motion detectors, airflow, and access/entry sensors. 3) Permits remote monitoring of temperature, humidity and digital dry contact. 4) Notification of alarms via email, SMS, SNMP traps when specified temperature and humidity thresholds or the change of status of a digital dry contact signal 5) Simple integration to a Building Management System (BMS). 6) Capable of Modbus over TCP/IP. Built-in Web server. 7) Option of additional humidity & Temperature sensor. 8) Datacenter & Server room Environment monitoring & control. We also offer Facility Monitoring system (FMS) equipment which extreme versatility that simplifies and consolidates monitoring of numerous types of signals and equipment available at facilities. These equipments can be UPS, water leak detection, Close control unit (CCU), access control or any equipment that has dry contact etc. Environmental monitoring, humidity monitoring, temperature monitoring, humidity & temperature monitoring, datacenter, server room, server room, rle, enviromux, nti, liebert, APC, netboltz, Aqualeak, SecurityProbe, openxtra, server room monitoring

Close control unit (ccu) also commonly known as computer room air conditioner (crac) or precision air conditioner (pac) use for precise control of temperature along with humidity in server room, datacenter, laboratory and various industrial applications. Our closed control unit (ccu or crac) has following features: 1) 5kw to 60kw nominal cooling capacity. 2) up flow and down flow configuration. 3) modular construction & low noise. 4) advanced airetronix controls technology. 5) tandem scroll compressors. 6) option of air & chilled water. 7) small footprint. 8) low noise condenser fan (optional) 9) optimized evaporator.

Supplier: Electro magnetic flow meters, turbine & ultrasonic flow meters, flow elements, flow indicators & totalizes, guided wave radar, ultrasonic, capacitance type, magnetic flow operated, level switches, pressure transmitters, digital pressure indicators and controllers, digital pressure gauges, sensors and transmitters, digital temperature indicators & controllers, digital temperature gauges, online ph, orp, conductivity, TDS, do transmitters, indicators and controllers, bar graph indicator, loop power indicators, process scanners and indicators, controllers, signal isolator, sequential timers, portal monitors, area gamma monitor, frisker contamination monitors, hand & foot contamination monitors, high & low volume air samplers, tritium in air, water monitors, vehicle contamination monitors, dose rate meters, vehicle contamination monitor, HV units

Rapid Test Detecting Beta-lactams, Sulfonamides And Tetracyclines In Milk 3sensor is a rapid assay in strips format detecting the contamination of milk samples by Beta-lactams, Tetracyclines and Sulfonamides molecules. Benefits - Only 7 minutes to results - User friendly - High sensitivity - Cost-effective - Test 3 in 1 - Save milk, save time, save energy - Rapid One Step Assay - No extra device or equipment needed - 12 months long term storage, 2-8, no freezing

Car intake air temperature sensor (IATS) Automotive coolant temperature sensor (CTS) automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS) car was NTC thermistor / temperature sensor Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions. Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.

The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly. Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal. The normal use of the coolant temperature sensor is -30 ° C to 120 ° C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure. Car intake air temperature sensor (IATS) Automotive coolant temperature sensor (CTS) automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS) car was NTC thermistor / temperature sensor Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions. Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.

The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly. Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal. The normal use of the coolant temperature sensor is -30 ° C to 120 ° C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure. Car intake air temperature sensor (IATS) Automotive coolant temperature sensor (CTS) automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS) car was NTC thermistor / temperature sensor Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions. Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.