NAP-66A is mainly used for gas detectors and leak testers. NAP-66A is a half in height and needs a half in power consumption compared to existing sensor so that thinner and lighter-weight detectors can be produced. The following are the basic characteristics but it is recommended to refer to the individual users manual for further information.
* Target gases and concentration
Propan(C3H8): 0.03~ 2.2% (0.03~ 1%)
Iso-butane(Iso-C4H10): 0.03~ 1.8% (0.03~ 0.8%)
Hydrogen(H2):0.05~ 4% (0.05~ 1.5%)
Ethanol(C2H5OH): 0.05~ 3.2% (0.05~ 1.5%)
Hydrocarbons(CnH2n+2): 1~100% LEL (1~50%LEL)
( ) is a detection range in high accuracy
* Ratings
Supply Voltage:
DC 2.0 ± 0.2V
AC 2.0 ± 0.2V (r.m.s. 50~60Hz)
Current (When 2.0V is applied):
DC 140 ~ 160mA
AC 140 ~ 160mA (r.m.s. 50~60Hz)
Ambient Temperature:
In operation -10 ~ +50
In storage -10 ~ +50
Ambient humidity:
In operation 95ï¼?RH or less
In storage 99ï¼?RH or less (No dew condensation)
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, Rice
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
Description: Nap-56a is not made with thermoplastics to achieve a higher temperature Resistivity. The pin locations and dimensions are compatible to nap-55a for the Convenience of current users of nemoto nap-55a. The gas sensitivity is better Than nap-55a by about 15%. Users are to pay attention to this higher gas Sensitivity upon calibration. Target gases and concentration Gasesdetection range Methanech40.05 - 5% (0.05 - 2%) Ethanec2h60.05 - 3.2%(0.05 - 1.5%) Hydrogenh20.05 - 4% (0.05 - 1.5%) Hydrocarbonscnh2n+21 - 100%lel (1 - 50%lel) ( )is a detection range in high accuracy Gas sensitivity characteristics Gas & concentrationoutput voltage Output in clean air-35 - +35 mv Methane 3, 000 ppm15 - 23 mv Iso-butane 1, 400 ppm12 - 18 mv Hydrogen 1, 400 ppm10 - 17 mv Ratings Itemsratings Supply voltagedc 2.5±0.25v Ac 2.5±0.25v(r.M.S. 50-60hz) Current (2.5v supplied)dc 150 - 170ma Ac 150 - 170ma(r.M.S. 50-60hz) Ambient temperaturein operation -10 - +50°c In storage -10 - +50°c Ambient humidityin operation 95%rh or less In storage 99%rh or less(no dew condensation)
Power (W): 18; Power factor: 0,5; Voltage/Frequency (V/Hz): 220/50; CCT (K): 6500/3000; Luminous efficacy (lm/W): 70; CRI (Ra): 80; Life span (hrs): 25.000; IP54; Two options: Round shape & Square shape; Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 7/10/12/15/20/30; Power factor: 0,9; Voltage/Frequency (V/Hz): 220/60; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 90/105/110; CRI (Ra): 80; Life span (hrs): 25.000; Various options: - Type 1: AC direct - Type 2: High efficacy - Type 3: 3-CCT Changeable AC direct - Type 4: 3-CCT Changeable High efficacy - Type 5: 3-Step Dimming - Type 6: PIR sensor Flicker-free, EMC; KC, CE certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
- Solar Garden lamps 30 W / 50 W; - Housing: Die Casting Aluminum; - 16 V / 40 W / 50 W / solar panel ; - Ternary Lithium Battery 12.6 V / 14 Ah / 22 Ah; - Philips LED chip SMD 180 pcs / 240 pcs; - Light Size: OD 500/605 mm, H 170 mm, Case Mounting Tube: ID 65 / 76 mm; - Control Mode: Light Control / Radar Sensor/ Time control ; - charging time 6 to 8 hours, Lighting time 12 hours;
Nap-50a is a miniature & low power consumption type sensor. Nap-50a is Mainly used for gas detectors. Compared to nap-55a, nap-50a has a lower Alcohol sensitivity to eliminate false alarms caused by alcohol, thus more reliable Gas detectors can be produced with nap-50a. The following are the basic Characteristics but it is recommended to refer to the individual user’s manual for Further information. See nap-66a for measuring circuit for sensor evaluation. Target gases and concentration GasesDetection range MethaneCh40.05 - 5% (0.05 - 2%) EthaneC2h60.05 - 3.2% (0.05 - 1.5%) HydrogenH20.05 - 4% (0.05 - 1.5%) HydrocarbonsCnh2n+21 - 100%lel (1 - 50%lel) ( )is a detection range in high accuracy Gas sensitivity characteristics Gas & concentrationOutput voltage Output in clean air-35 - +35 mv Methane 3, 000 ppm10 - 16 mv Hydrogen 1, 400 ppm7 - 12 mv Ethanol 1 %Less than 10 mv Ratings ItemsRatings Supply voltageDc 2.5±0.25v Ac 2.5±0.25v(r.M.S. 50-60hz) Current (2.5v supplied)Dc 150 - 170ma Ac 150 - 170ma(r.M.S. 50-60hz) Ambient temperatureIn operation -10 - +50°c In storage -10 - +50°c Ambient humidityIn operation 95%rh or less In storage 99%rh or less(no dew condensation)
Supplier: Specialty metal products: titanium, stainless steel, and copper manufactured products, bars, pipe, tubular, sheet, plate, coils, etc. scrap metal: used rails, and copper mill berry & cathode. crude oil, gas & fuel products: en590, jet fuel, ago, bonny light crude oil, gasoline, espo, d6, d2, petcoke, etc. food products: sugar, soybeans, wheat, etc. fertilizers: urea and dap ore & minerals: lithium