CV7-OEM Ultrasonic Wind Speed Sensor Description
CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption.
With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and installations. It is powered by 8-30 VDC power supply and it outputs RS232/RS422/NMEA0183 signal.
CV7-OEM Ultrasonic Wind Speed Sensor Specification:
* Output rate: 2 Hz / 30 Hz measurement or *4 Hz / 60 Hz meas.
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +55 degree C
-
Cv7-e ultrasonic wind speed sensor description The cv7-e is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The cv7-e is powered by 8-30 vdc power supply and it outputs rs232 / rs422 / 5 v level signal / nmea0183. The cv7-e shows a data rate twice faster than the cv7 and cv7-v with a data output 4 per second. The small size of this sensor makes it very discreet. Like every lcj capteurs products, cv7-e is energy efficient. Cv7-e has proved its value with universities â??laboratories, scientific and wind tunnels successful tests. It can be used connected to a pc and to any system featuring a nmeaâ® input port. Cv7-e ultrasonic wind speed sensor specification: * output data format: nmea0183, mwv, xdr * information transmited: instant. W. Speed, instant. W. Angle, avaibility * output rate: 4 hz / 60 hz measurement * wind module sensitivity: 0.12 m/s * wind module resolution: 0.05 m/s * wind module dynamic: 0.12 to 40 m/s * direction sensitivity: +/-1.5' * direction resolution: 1' * power supply: 8 v to 30 v dc * electrical consumption: 9 ma * op. Temp. Without icing: -15'c to +50'c * cable: 25 cm / 4 x 0.22 mm2, 20 g/m * connection: 4 wires * weight of the head: 100 gr * weight of unit assembly: 200 gr with mounting parts.
The cv7 range of products features lateral transducers delivering four independent measurements. The validity checks are used to measure head wind vectors for calculations. This method gives a wind speed sensitivity of 0.15 m/s, and reliability and excellent linearity up to 40 m/s. Cv7-v ultrasonic wind speed sensor specification: Output data format: nmea0183; mwv, xdr Information transmited: instant. W. Speed, instant. W. Angle, avaibility Output rate: 2 hz / 30 hz measurement Wind module sensitivity: 0.12 m/s Wind module resolution: 0.05 m/s Wind module dynamic: 0.12 to 40 m/s Direction sensitivity: +/-1.5' Direction resolution: 1' Power supply: 8 v to 30 v dc Electrical consumption: 9 ma Op. Temp. Without icing: -15'c to +55'c Cable: 25 m / 4x0.22 mm2 Connection: 4 wires Weight of the head: 100 gr Weight of unit assembly: 200 gr with mounting part Mounting: vertical ; 300 aluminium arm, 16 mm
CV7-E Ultrasonic Wind Speed Sensor Description The CV7-E is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The CV7-E is powered by 8-30 VDC power supply and it outputs RS232 / RS422 / 5 V level signal / NMEA0183. The CV7-E shows a data rate twice faster than the CV7 and CV7-V with a data output 4 per second. The small size of this sensor makes it very discreet. Like every LCJ Capteurs products, CV7-E is energy efficient. CV7-E has proved its value with universities â??laboratories, scientific and wind tunnels successful tests. It can be used connected to a PC and to any system featuring a NMEA® input port. CV7-E Ultrasonic Wind Speed Sensor Specification: * Output rate: 4 Hz / 60 Hz measurement * Wind module sensitivity: 0.12 m/s * Wind module resolution: 0.05 m/s * Wind module dynamic: 0.12 to 40 m/s * Direction sensitivity: +/-1.5 degree * Direction resolution: 1 degree * Power supply: 8 V to 30 V DC * Electrical consumption: 9 mA * Op. temp. without icing: -15 degree C to +50 degree C -
CV7-V Ultrasonic Wind Speed Sensor Description The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183. CV7-V Ultrasonic Wind Speed Sensor Application Static wind sensor A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure. CV7 series was extensively tested in Marine applications for both precision and robustness. Configurable wind sensor CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format. CV7-V connexion CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats. In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format. Quality All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process. CV7-V Ultrasonic Wind Speed Sensor Specification: Output data format: NMEA0183; MWV, XDR Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility Output rate: 2 Hz / 30 Hz measurement Wind module sensitivity: 0.12 m/s Wind module resolution: 0.05 m/s Wind module dynamic: 0.12 to 40 m/s Direction sensitivity: +/-1.5 degree Direction resolution: 1 degree Power supply: 8 V to 30 V DC Electrical consumption: 9 mA Op. temp. without icing: -15 degree C to +55 degree C Cable: 25 m / 4x0.22 mm2 Connection: 4 wires Weight of the head: 100 gr Weight of unit assembly: 200 gr with mounting part Mounting: Vertical ; 300 aluminium arm, 16 mm
LED light.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Powerï¼? 900W LED Qtyï¼? 72pcs 5W LED & 6pcs 90W COB Voltage ï¼? AC85-265V Work frequencyï¼? 50/60Hz Lumen ï¼? >15400Lm Dimmensionï¼? 660X385X118mm N.W ï¼? 11.4kg Coverage ï¼? 1.0Ã?1.2 m Warranty ï¼? 50000 hours
Power 900W LED Qty 72pcs 5W LED & 6pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmension 660X385X118mm N.W 11.4kg Coverage 1.0 1.2 m Warranty 50000 hours
Power 1200W LED Qty 96pcs 5W LED & 8pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen 21050Lm Dimmension 848X385 X118mm N.W 14.8kg Coverage 1.5 X1.0 m Warranty 50000 hours