Wq600 Rugged Orp Sensor

Wq201 ph sensor description Wq201 ph sensor is a rugged and reliable water ph measuring device. The ph transmitter is mounted on 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The sensor's output is 4-20 ma with a three-wire configuration. The wq201's electronics are com- pletely encapsulated in marine grade epoxy within a stainless steel housing. The unit also uses a re- movable shield and replaceable ph sensor element for easy maintenance. Wq201 ph sensor features * submersible ph measurements * fully encapsulated electronics * 4-20 ma output * marine grade cable with strain relief * stainless steel housing * replaceable ph element Wq201 ph sensor applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. Wq201 ph sensor specifications * outputâ??: 4 to 20 maâ?? * rangeâ??: 0 to 14 phâ?? * accuracyâ??: 2% full scaleâ?? * maximum pressureâ??: 40 psiâ?? * operating voltageâ??: 10 to 30 vdcâ?? * current draw: 5.5 ma plus sensor outputâ?? * operating temperatureâ??: 23 to +131'f (-5 to +55'c)â?? * warm-up time: 3 seconds minimumâ??

WQ401 Dissolved Oxygen Sensor Description WQ401 Dissolved Oxygen Sensor is a rugged and reliable water oxygen measuring device. The WQ401's sensor is attached to 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The sensor's output is 4-20 mA with a three wire configuration. The sensor's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. The unit uses a removable shield and dissolved oxygen element for easy maintenance. WQ401 Dissolved Oxygen Sensor Features * Measure dissolved oxygen in situ * Fully encapsulated electronics * 4-20 mA output * Marine grade cable with strain relief * Stainless steel housing * Replaceable dissolved oxygen element WQ401 Dissolved Oxygen Sensor Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ401 Dissolved Oxygen Sensor Specifications * Output: 4-20 mA * Range: 0 to 100% saturation, 0 to 8 ppm, temperature compensated to 77'F (25'C) * Accuracy: ±0.5% full scale * Maximum Pressure: 40 psi * Operating Voltage: 10 to 36 VDC * Current Draw: 15.5 mA plus sensor output * Warm-up Time: 10 seconds minimum * Operating Temperature: -40 to +131'F (-40 to +55'C)

WQ-COND Rugged Water Conductivity Sensors Description WQ-COND Conductivity Sensors are suitable for measuring conductivity in a wide variety of applications including laboratories, streams, rivers, and groundwater. The conductivity sensor's small size and rugged housing make it useful for hand held measurements or permanent installation. WQ-COND Rugged Water Conductivity Sensors Features * Fully encapsulated electronics * Dual 4-20 mA outputs * Sensor armor available for harsh environments * Marine grade cable with strain relief * Measure conductivity up to 82 feet deep WQ-COND Conductivity Sensors Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ-COND Rugged Water Conductivity Sensors Specifications * Temperature Range: 23 to 158'F (-5 to 70'C) * Conductivity Accuracy: +0.5% of reading * Temperature Accuracy: +0.4'F (+0.2'C) * Temperature Resolution: 0.02'F (0.01'C) * Output: Dual 4-20 mA * Maximum Pressure: 35 psi (82 ft (25m)) * Warm-up Time: 3 seconds minimum * Operating Voltage: 10-36 VDC

Supplier: Online ph meter, orp, ph sensor, industrial conductivity meter, sensor, online acid, alkali meter, sensor, online dissolved oxygen meter, sensor, online turbidity meter, sensor, online residual, total chlorine meter, sensor, online ion meter, sensor, online cod, bod, heavy metals meter

Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.

Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.

Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.

Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.

•agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. •agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. •agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). •agecho accuracy is 1% of the full scale. •agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) •agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. •agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. •agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. •agecho operating temperature 0 to 65 degree celsius. •agecho temperature compensated measurement for better accuracy (optional). •agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.