SG01S-C18
UVC-only SiC based UV photodiode A = 0.06 mm2
Properties of the SG01S-C18 UV Photodiode
* UVC-only sensitivity, compliant with DVGW W294, PTB reported high chip stability
* Active Area A = 0.06 mm2
* TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10mW/cm2 peak radiation results a current of approx. 720 nA
SG01S-C18 UV Photodiode Specifications
* Typical Responsivity at Peak Wavelength: 0,120/AW
* Wavelength of max. Spectral Responsivity: 275nm
* Responsivity Range: 225 - 287nm
* Active Area: 0.06mm2
* Dark Current (1V reverse bias): 0.2fA
* Capacitance: 15pF
* Short Circuit (10mW/cm2 at peak): 720nA
* Temperature Coefficient: < 0.1%/K
* Operating Temperature: -55 ~ +170°C
* Storage Temperature: -55 ~ +170°C
* Soldering Temperature (3s): 260°C
High Performance Fans Pedestal Fans OPF-3297 White - 400mm/16 Inch Sweep 1250 RPM Speed Motor Double ball bearing motor assuring no motor jam no motor burining Innovative Design Aesthetic Looks Sleek and Stylish Aerodynamically Designed and Balanced blade for Superior Air Delivery Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle Jerk Free and Uniform Oscillation Long lasting Powder coated guard set & Polymer Ring for anti-corrosion 100 % copper wire motor for long life 65cmm stronger air delivery 55 Watts Energy efficient motor for power saving 3 speed choices with sleek and attractive switch panel Unique Telescopic arrangement for height adjustment Large & Heavy base for enhanced stability
Supplier: Basmati & non basmati rice: 1121 raw basmati, 1121 steam basmati, 1121 white sella basmati, 1121 golden sella basmati, 1509 steam, 1509 sella, 1509 golden sella, 1401 steam, 1401 sella, 1401 golden sella, pusa, sugandha rice, sharbati, ir 64 parboiled.
fmcg: confectionaries, biscuits, potato chips, beverages, grocery items, canned fish, edible oil, palm oil, personal care products.
food ingredient: food color, food flavor, caramel, soya lecithin, spice oils & oleoresins, polyglycerol polyricinoleate (pgpr).
power : diesel generator, sine wave inverter, solar inverter, mppt inverters, tall tubular batteries, smf batteries.
automotive batteries: 2 wheeler batteries, 3 wheeler batteries, car batteries, truck batteries.
tyre: bicycle tyres, 2 wheeler tyres, 3w tyres, car tyres, suv tyres, truck & bus bias & radial tyres, tractor tyre, otr tyres.
adhesive/ glue: wood adhesive, industrial adhesive, solvent based adhesive, sprayable adhesive, contact adhesive.
corn starch.
Buyer: Used cooking oil, a4 size paper, glycerine
Model : uv light Power : 2w Power supply : usb 5v Size: 357*40*35mm Wave length : 275+395nm Lamp beads : uv3535 6v 2w Life span: 8000h Color: black /white Li-battery : 1800ma Sterilization time : cm height 10-20 seconds
Supplier: Soda ash light / dense 99.2%
sodium bicarbonate
caustic soda flakes 99%
sodium sulphate anhydrous (ssa) 99%
sodium sulphite flakes (ssf) 60%
sodium metabisulphate
hydrogen peroxide (h2o2) 50%
formic acid 85%
glacial acetic acid
paraffin wax
liquid paraffin (white oil) lp 100
menthol crystal
fumed silica
deg (di ethylene glycol)
mono ethylene glycol (meg)
poly ethylene glycol (peg),
base oil 150n, bs 150, 600n
bitumen 60/70
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
ferrous sulphate heptahydrate
additive for lubricating oil
aromatic chemicals
Services: Exporting of chemicals & other products
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Floating cable which can be applied to underwater robot equipment, either in fresh water environment or in seawater environment. It is widely used in marine exploration robot, underwater ROV UAV remote control submersible, underwater camera, underwater construction, underwater search and rescue robot, pipeline detection robot, submersible pump and the link between various underwater electrical equipment and shore based equipment; Link of signal transmission, power supply and equipment control system from underwater to water.
Application :- This is a premium product of electrical wires from \'JPCL\'. These cables are ideal for wiring in residential and commercial complexes, high-rise buildings, hotels, hospitals, schools, colleges, etc. (where the density of people is high). During a fire, these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of fire enabling those trapped inside to escape safely. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and manufactured in-house only. The insulation is far superior in terms of critical oxygen and temperature index as well as in light transmission and acid gas generation. The skin coloration offers high insulation resistance and long life. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.75, 1.00, 1.50, 2.50, 4.00 and 6.00 Sq. mm Color Codes : Red, Yellow, Blue, Black and Green (For Earthing) Specification : IS:694 Packing : In 90 meter coils in attractive cartons
Mystical combination of terracotta clay modelling with new design concepts which caters to current trend. Table lamps are handmade based on terracotta vases. The lamp shades are coated with a hand painted cloth and the inner surfaces are made of PVC which traps the heat emitted by the bulb.
Mystical combination of terracotta clay modelling with new design concepts which caters to current trend. Table lamps are handmade based on terracotta vases. The lamp shades are coated with a hand painted cloth and the inner surfaces are made of PVC which traps the heat emitted by the bulb.
