Temperature and humidity sensor module HTF3223
Description
Based on the rugged HS1101LF humidity sensor, HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output.
MAIN FEATURES
* Size and connector type match existing humidity modules.
* Stable, linear proportional frequency output from 10 to 95% RH.
* Calibrated within +/- 5% RH @ 55% RH.
* Optional 10 K +/- 3% NTC temperature sensor (HTF 3223)
* Stable characteristics with temperature.
* High reliability and long term stability
HUMIDITY SENSOR SPECIFIC FEATURES
* Instantaneous de-saturation after long periods in saturation phase.
* Fast response time.
* High resistance to chemicals.
* Not affected by water immersion.
* Patented solid polymer structure.
TEMPERATURE SENSOR SPECIFIC FEATURES
* High quality thermistor
* Stable
* High sensitivity
MAXIMUM RATINGS
Storage Temperature: -40 to 85 °C
Storage Humidity Range: 0 to 100 % RH
Supply Voltage (Peak): 7 Vdc
Humidity Operating Range: 0 to 99 % RH
Temperature Operating Range: -30 to 80 °C
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
Supplier: Wired magnetic door sensors.
Power Modules are Point of Load (POL) DC-DC converters integrating controller chips, chokes and I/O capacitors into a single power management package for step-down(buck) applications. The low profile and compact size enables significant saving of board space, high efficiency enhances application performance, and design structure allows automated assembly by standard surface mount equipment
For price, specification and other details please contact us
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
Economic and reasonable OEM humidity sensor module Humidity voltage output: 1-3.6V Low power consumption Long stability and proven reliability not affected by repetitive condensations Direct interface with micro-controller RoHS Directive-compliant
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Temperature measurement through NTC 10 kΩ +/- 1% direct output Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses · GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. · GP3515 is protected against reverse polarity · GP3515 is not light sensitive · Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. -