Pump Bearing assembly also called rotor assembly, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the pump and motor as a complete pump working system. Its stability will directly affect pump operation and worklife.
The Front Lining of Andritz ACP 300-400 Single-stage Centrifugal Pump is made by European standard or US standard.
Tobee Shaft 20612-02-33
C117C21 Shaft Spacer
Description
P/N: 20612-02-33 (646490557) Shaft for Mission Magnum Centrifugal Pumps and 2500 Supreme Pumps.
offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to mud pump as a filling pump. 6511 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Description
P/N: 20612-02-33 (646490557) Shaft for Mission Magnum Centrifugal Pumps and 2500 Supreme Pumps.
offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to mud pump as a filling pump. 6511 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
P/N: 23444-01-72 (648415156) Shaft Sleeve Seal is used for Mission Magnum Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14 and 10x8x14.
Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3213 through 8614 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
P/N: 25014-04M-B (661007005) Packing, Shaft can be used for Mission Magnum Centrifugal Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14.
The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications.
The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled .
Tobee provides replacement parts for Mining pump spare parts and stock a range of slurry pump wetted end parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc.
20943-21 641102182 Sleeve, Shaft used for Mechanical Seal Mission Magnum Centrifugal Pump.
The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Typical Applications
manufactures Andritz alternative ACP, S, VP, FP, CP series Paper & Pulp Stock Pumps and Pumps Wearing Spares, all the pumps and spares parts are widely for Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.
Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2 3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances.
Spare Pump Parts C004M bearing house is used for 3/2C-AH pump and 4/3C-AH pump.
Slurry Pump Bearing Housing is one most important part of bearing assembly for slurry pumps, It contains shaft and bearings, There are four clamp bolts through the base which fasten the slurry pump bearing housing.
Bearing Housing with Shaft for Bearing Assembly of Heavy Duty Slurry Pumps. Introduction: Bearing assembly is an assembled part which comprises parts like shaft, bearing housing, bearings, end cover, labyrinth, etc. and is the rotor part of a slurry pump.Heavy duty roller bearings are housed in a removeable bearing cartridge. Cartridge type with grease lubricated roller bearings designed for more than 60 000 operating hours.
Slurry pump shaft, slurry pump bearing housing, slurry pump bearings, slurry pump end cover, and slurry pump labyrinth, etc.assembled a slurry pump bearing assembly, and is the rotor parts of slurry pump. The bearings installed are branded, ZWZ, HRB, SKF, TIMKEN.
Andritz ACP series Pump Bearing Assembly used the single mechanical seal for stock conveyance without sealing and rinsing water.
Design Features:
Impellers - wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes.
Liners - wide variety of metallic and elastomeric options (metal and elastomer liners are interchangeable) to select from in order to provide the longest wear life possible.
Bearing assembly - Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment, Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field.
Seal arrangements - Expeller (Centrifugal Seal): no external sealing water required where applicable. Stuffing Box: flushed gland sealing with braided packing and a lantern ring. Mechanical Seals: advanced sealing technique without sealing leakage.
Description
Mission Magnum Centrifugal Mud Pump Spare Parts Housing, Outboard Bearing 20624-01-01 (Processing# 644308504) and it can be used for Mission pump model from
The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Soffers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
Slurry Pump Bearing Assembly is the most important part for drive power unit of AH Slurry Pump. It is also called rotor assembly. And the bearing assembly is to connect the slurry pump and motor as a complete pump working system. Its stability will directly affect slurry pump operation and work-life.
Slurry Pump Bearing Assembly is the most important part for drive power unit of AH Slurry Pump. It is also called rotor assembly. And the bearing assembly is to connect the slurry pump and motor as a complete pump working system. Its stability will directly affect slurry pump operation and work-life.
B005M Bearing Assembly 1.5/1B-AH, 2/1.5B-AH Slurry Pump
C005M Bearing Assembly 3/2C-AH Slurry pump
CAM005MBearing Assembly- 4/3C-AH Slurry Pump
D005M Bearing Assembly 4/3D-AH, 6/4D-AH Slurry Pump
E005M Bearing Assembly 6/4E-AH
EAM005M Bearing Assembly- 8/6E-AH Slurry Pump
R005M Bearing Assembly 8/6R-AH Slurry Pump
FAM005M Bearing Assembly 8/6F-AH, 10/8F-AH, 12/10F-AH Slurry Pump
SH005M Bearing Assembly 10/8ST-AH, 12/10ST-AH, 14/12ST-AH Slurry Pump
TH005M Bearing Assembly 16/14TU-AH, 18/16TU-AH, 20/18TU Slurry Pump
CAM005M Bearing Assembly 1.5/1C-HH Slurry Pump
EAM005M Bearing Assembly 4/3E-HH Slurry Pump
FAM005M Bearing Assembly 6/4F-HH Slurry Pump
EAM005M Bearing Assembly 10/8E-M Slurry Pump
R005M Bearing Assembly 10/8R-M Slurry Pump
Tobee F8083R55 Throat Bush is a wetted part used for 10/8E-M Rubber Slurry Pump. the wet end spares include: impeller F8147R55, Cover plate liner F8018R55, Frame Plate Liner F8036R55, Throat Bush F8083R55.
2P/N: 24027-01-30 (653322305) Stuffing Box, Mechanical Seal for Mission 14x12x22 XP Centrifugal Pump.
Mission XP Blender Pump and MCM XL Pump are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume mobile and stationary applications where a small footprint is critical. High chrome alloy or hard iron material options for different applications.
XP/XL Centrifugal Pumps Main Parts:
Heavy Duty Pedestal - heavy duty frames are manufactured from cast iron for high strength and durability to withstand high piping loads.
Casing - The Mission XP/XL frac pump has been beefed up in critical wear areas for extra life. The concentric housing eliminates vibration, turbulence, cavitation, and reduces bearing load and shaft deflection.
Impeller (Open Vane Design) - Mission XP/XL pump open vane impeller design is engineered to reduce turbulence, eliminate recirculation, lower radial and thrust loads, and provide a smooth flow of fluid through the pump.
Wear Plates - The Mission XP/XL pump casing comes with replaceable wear plates. This feature reduces the maintenance costs of housing replacement by merely replacing the wear plates.
Shearing Ring- Mission XP pump offers a shearing ring option to convert a regular centrifugal pump to a shearing pump for special mud applications.
Mechanical Seals - Mission XP/XL pump takes pride in carrying one of the finest mechanical seals on the market, whether it be Tungsten-Tungsten, Tungsten-Silicone, or Silicone-Carbide. They come with a highly polished sealing faced and with piton bellows and stainless steel springs.
Pump Bearings - Mission XP/XL pump uses nothing but the best and the finest bearings in its pumps. The outboard bearing assembly consists of a pair of angular contact bearings with high thrust load ratings and zero end play. The heavy duty inboard bearing is a double row ball bearing with high radial load ratings to compensate for the larger size impellers and heavy duty applications.
Labyrinth Seals (optional) - Mission XP pump installs labyrinth seals by customer request in all its pumps to isolate the bearings from harmful contaminants while keeping bearings lubricated.
H20617A 20617AH Cover OB Bearing with ductile iron that used for Mission 2500 Supreme Centrifugal Drilling Pumps
Mission 2500 Supreme Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 2500 Supreme is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration
Design Features
Versatile stuffing box
Thick strong concentric casing with replaceable casing wear pad
Casing provided with replaceable casing wear pad on 4x3x13 10x8x14 models
Replaceable stuffing box cover with dual stuffing box bolts
Longlife noadjustment mechanical seal available for near zero leakage
Replaceable shaft sleeve
Solid Frame base
Labyrinth seals for maximum bearing protection
Duplex angular contact bearings
Full pipe diameter entrance for minimum turbulence and maximum efficiency
Wide semiopen impeller creates lower axial thrust for improved bearing life
All sizes feature the same power end
QV65005J Bearing Assembly is one of wearing spares for 65QV-SP Vertical Slurry Pump with 1500mm submerged length,the bearing assembly for slurry pump is used to connect the pump and motor parts to form a complete working system. The stability of the bearing assembly for vertical slurry pump directly affects the operation and service life of the pump.The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft. whether new or re-used after overhaul, should be correctly packed with grease when fitted to the Bearing Assembly.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances. Tobee offers ZWZ, SKF, TIMKEN, NSK, FAG, NTN brands for different options.
Part 20617AH Cover Outboard Bearing is used for Mission Magnum 2500 Supreme type Centrifugal Pumps
Mission 2500 Supreme Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 2500 Supreme is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration
Design Features
Versatile stuffing box
Thick strong concentric casing with replaceable casing wear pad
Casing provided with replaceable casing wear pad on 4x3x13 10x8x14 models
Replaceable stuffing box cover with dual stuffing box bolts
Longlife noadjustment mechanical seal available for near zero leakage
Replaceable shaft sleeve
Solid Frame base
Labyrinth seals for maximum bearing protection
Duplex angular contact bearings
Full pipe diameter entrance for minimum turbulence and maximum efficiency
Wide semiopen impeller creates lower axial thrust for improved bearing life
All sizes feature the same power end
T004M Bearing Housing is used for 16/14TU-AH Horizontal Slurry Pump.
Slurry Pump Bearing Housing is one most important part of bearing assembly for slurry pumps, It contains shaft and bearings, There are four clamp bolts through the base which fasten the slurry pump bearing housing.
Bearing Housing with Shaft for Bearing Assembly of Heavy Duty Slurry Pumps. Introduction: Bearing assembly is an assembled part which comprises parts like shaft, bearing housing, bearings, end cover, labyrinth, etc. and is the rotor part of a slurry pump.Heavy duty roller bearings are housed in a removeable bearing cartridge. Cartridge type with grease lubricated roller bearings designed for more than 60 000 operating hours.
Slurry pump shaft, slurry pump bearing housing, slurry pump bearings, slurry pump end cover, and slurry pump labyrinth, etc.assembled a slurry pump bearing assembly, and is the rotor parts of slurry pump. The bearings installed are branded, ZWZ, HRB, SKF, TIMKEN.
14A 6124-4 Part# 648402105 Lockwasher O.B. Bearing is to reinforce the outer bearing of Magnum centrifugal sand pumps.
The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Description
Mission Magnum Centrifugal Mud Pump Spare Parts Housing, Outboard Bearing 20624-01-01 (Processing 644308504) and it can be used for Mission pump model from
The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications.
The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
H3861-117 3861-138 Bolt, Stuffing box will installed on the Mission 2500 Supreme Pump Stuffing Box.
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Design Features:
Description
20622A Gland Assembly for Mission 4x3x13 Mud Pumps.
offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
20622A Packing Gland Assembly 20622A is used for Magnum 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14 Pumps.
Part No.: 20622A
Stock No.: 64110338
The Gland Assembly, Packing is mainly used to compress the packing to ensure the tightness between the packing and the shaft sleeve. It will be contacted with the packing shaft and deflector assembly to act as a seal.
Tobee offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Ceramic Shaft Sleeve for Slurry Pump and gravel pump is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature.
Ceramic Slurry Pump spare parts is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mainly included impeller, Liners, Throat bush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However, the weight of ceramic spare parts is only 1/3 of chrome spare parts.
Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and downtime were reduced accordingly. slurry pump ceramic shaft sleeves are precision formed of high-density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower coefficient of friction, results in extended sleeve life and long service from the packing.
offers part codes for ceramic shaft sleeves include: B075J04, B075J05, C075J04, C075J05, CH075J04, CH075J05, CH076J04, CH076J05, D075J04, D075J05, E075J04, E075J05, F075J04, F075J04, FAM075J04, FAM075J05, FAM076J04, FAM076J05, PE075J04, PE075J05, PF075J04, PF075J05, G075J04, G075G05, SH075J04, SH075J05, SH076J04,SH076J05, GH075J04, GH075J05, GH076J04, GH076J05.
Hydraulic Excavator Submersible Dredge Pump Description:
Hydraulic Excavator Submersible Dredge Pump is a versatile tool. It can be attached to the of an excavator and run using the excavators hydraulics, or it can be suspended from a crane or an A-frame to form a high efficient suction dredger. Design of dredgers comes out to be extremely simplified with possibility to reduce capital cost and have high working depth without any increase in the cost of equipment. Pumps can be provided with cutter heads and thus form a submersible cutter dredger, and could include high pressure water jets to work with highly compacted soil. All of our Submersible Slurry Pumps are suitable to be used for dredging. The solids are pumped mixed with water. There are many applications for our dredge pumps: Dredging of Rivers, Harbors, Dams, Canals, Lakes and Lagoons. In some cases is essential to control the turbidity while dredging.
Pos. Number 135.2 Rear Liner 1.4517 used for Andritz S 125-400 DD Centrifugal Pumps.
The Rear Liner 135.2 suitable for Andritz S Series, the model: S 80-265, S 100-265, S 125-265, S 100-350, S 125-350, S150-330, S125-400, S 150-400, S 200-380, S 150-470, S 200-470, S 250-430, S 350-470, S 500-600, S 600-700.
manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc
Interchangeable Pump Parts Impeller ACP 80-250 3+3 SO of EN.1.4474 are widely used for highest efficiencies in various industrial applications.
Front Lining also called front insert, it s one of the important parts for the ACP80-250 Centrifugal Single-stage Pumps.
Andritz parts and spares for the Andritz ACP series, are some of the most popular ranges of equivalent parts and spares. These pumps parts are particular popular with our customers in the paper industry.
Description
19206-XX-30 Impeller for Mission Magnum 4x3x13 Centrifugal Pumps.
Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.
Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request
All impellers are investment casted or resin-casted with pickling (acid washing) as our power-end parts, which are also available in cast steel in favor of ductile. All other sizes are resin-casted with pickling (acid washing) to ensure smooth surface finish. To ensure quality, we meticulously check threaded holes by fitting their bolts to ensure the threads are clean and clear. All casings are of course pressure tested and all impellers and dynamic balanced. Each casing is properly pressure tested prior to shipping.
Our impellers are comparable to famous pump
FP40-400.12 Fan Pump Exchange Unit / FP40-400.12 Rotor Unit is 100% interchangeable with original Andritz FP40-400.12 Fan Pump, Th FP40-400.12 Exchange Unit made from duplex stainless steel 1.4460.
FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 mh and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
High efficiency and low pulsation
Water
With efficiencies of over 90%, FP40-400.12 Double Suction Split Case Pumps permanently help to save valuable energy.
Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation.
Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components)
Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
100RV-SP vertical sump pumps spares Features Lower SP10116L-G01 Impeller SP10206A05A, Casing SP10092A05A , Back Liner SP10041A05A , Lower Strainer SP10116LD21, Strainer SP10116-1-NBR, Casing Seal SE4124-NBR.
pump impellers are interchangeable with AH/HH/LM pump impellers, The Impeller is one of the most important parts for slurry pump. Centrifugal slurry pumps need impeller to produce the centrifugal force which transfer the . The centrifugal force is produced by the impeller which rotates to a certain speed, As main rotating component which normally has vanes to impart the centrifugal force to the liquid, Usually, slurry pump impellers have a plain or a Francis type vane.
Release Collar T239m
OEM Andritz ACP series pump spares Impeller ACP 150-400.5 semi-open type in a highly wear-resistant design.
Description
11 inch Impeller 19121-70-30 is used for 6x5x11 Mission Magnum Centrifugal Sand Pumps.
provides 19121-xx-30 impellers for Mission Magnum centrifugal pump 6x5x14:
19121-70-30 Impeller 6 x 5 11 inch
19121-80-30 Impeller 6 x 5 12 inch
19121-90-30 Impeller 6 x 5 13 inch
19121-A0-30 Impeller 6 x 5 14 inch
Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.
Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request
Impeller for 8AHF Pump
Discharge Pipe Gasket SP10204 is one of spare parts for 100RV-SP Vertical Sump Slurry Pumps.
Discharge Pipe Gasket is used to seal the outlet of 100RV-SP vertical slurry pump and pipeline or valve connected to the slurry pump discharge end.
100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.
FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
FP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Design Features:
Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
Shaft seal - Mechanical seals and packing seal can be used as per requested
Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate.
are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.
20943-21 641102182 Sleeve, Shaft used for Mechanical Seal Mission Magnum Centrifugal Pump.
The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications.
The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Vertical slurry pump named vertical spindle pump, Vertical sump pump, vertical cantilever pump. vertical submerged pump. Vertical sewage pump, Column pump as well.
Impeller SP10206 - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Casing SP10092 - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Back Liner SP10041 - It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardard pump back liners with high chrome, natural rubber, polyurethane for different working condition.
Vertical Sump Pump Parts:
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Submerged Bearings - None
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc.
ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
ACP Centrifugal Pump Design:
Impeller(230)
Accelerating the medium by charging it with energy.
Semi-open impeller with vanes on the back.
Spiral casing (102)
Guiding the medium with a favorable flow pattern, converting speed energy into pressure energy.
Pressure-sealed pump casing with delivery and suction channels.
Suction and delivery flange.
Holds the bearing housing with bearing assembly, shaft and impeller.
Pump shaft (211)
Holding the impeller, shaft seal, bearing assembly and coupling.
Transmitting the drive energy to the impeller and thus, to the medium.
Sturdily dimensioned drive shaft.
Bearings
Interface between stationary and rotating parts. Absorption of axial and radial forces.
Impeller side: Two angular contact ball bearings (321.1) with steel cage.
Drive side: One deep groove ball bearings (321.2) with steel cage.
Shaft seal
Depending on operating requirements, there is a choice of eight different shaft seals:
Cartridge mechanical seal - single
Cartridge mechanical seal - double
Standard cartridge mechanical seal - single
Standard cartridge mechanical seal double
Single standard mechanical seal
Tandem mechanical seal
Stuffing box packing
Dynamic shaft seal
Back Liner SP20041A05 is used for 200SV-SP Vertical Slurry Pump.
Slurry Pump Frame Plate Liner Insert is a wear part of slurry pumps, It is also called for slurry pump back liner based on locating position in slurry pump structure, Frame plate liner insert forms a pump chamber with throat bush and volute liner where the slurry would flow through them, offers frame plate liner inserts are interchangeable with warman pump frame plate liner inserts with high chrome, natural rubber, polyurethane for different working condition.
Andritz S Pump and Spares S100-350 pump front lining is made of 1.4460 material, and S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc.
Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
Description
20622A Gland Assembly for Mission 4x3x13 Mud Pumps.
offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Description
20622A Gland Assembly for Mission 4x3x13 Mud Pumps.
offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
The Standard-Front Lining of 300-400 Single-stage Centrifugal Pump is made by standard or standard.
Standard-Front Lining is Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content with consistencies of up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. centrifugal pumps from the series can be delivered with and for an Industrial Internet of Things upward integratable base.
4/3D AHR Slurry Pumps are 100% analogue of original 4/3D-AHR Slurry Pumps.
4/3D-AHR Rubber Lined Slurry Pump is widely used for transporting slurry with strong corrosion and high concentration for many industries such as metallurgy, mine, coal, electric power, building materials etc. The wet parts is 100% interchangeable with 4/3D-AH metal lined slurry pump.
Design Features:
Double casings design centrifugal rubber lined slurry pump, wide passage for solids
Bearing assembly & frame: Both standard & high capacity types available.
A large diameter shaft with a short overhang minimizes deflection and vibration.
Heavy duty roller bearing is housed in a removable bearing cartridge.
Rubber slurry pump body is fastened with the frame by minimum bolts.
Slurry pump impeller adjustment is provided in a convenient position below the bearing assembly.
Slurry pump Impeller & liner material: natural rubber etc
High efficiency impeller available: up to 86.5% for certain type.
Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12.
Shaft seal: Packing seal, centrifugal seal, mechanical seal.
Discharge branch: 8 positions in each 45
Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler etc.
Hydroman Hydraulic Slurry Pump Description:
Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
FEATURES LOWER SP10116L-G01 Spare Parts is installed on 100RV-SP Vertical slurry pump.
100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.
Design Features:
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Upper Strainer - Drop-in metal mesh, snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
Lower Strainer - Bolted metal or polyurethane for SP, moulded snap-on elastomer for SPR.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Submerged Bearings - None
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application. Wetted components are available in a wide range of alloys and elastomers. They are ideally suited for handling abrasive and corrosive liquids and slurries while submerged in sumps or pits.
Tobee 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Polyurethane Pump Spares are made by the material of a polymer composed of organic units joined by carbamate (urethane) links, so the work life of Polyurethane pump parts is longer than Rubber materials for 3~5 times, Slurry Pump Polyurethane Spare Parts include PU Impeller, PU Throat bush, PU Frame plate liner, PU Cover plate liner, PU Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here.
Polyurethane Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field, Diamond, Alumina, Coal, Gold, Silver, Cement, Lead & zinc, Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands, Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum, Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking Operations, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac Sand Blending, Tobacco, Construction, City Sewage, Industrial Processing etc.
Slurry Pump Polyurethane impellers have a longer life, which reduces the frequency of replacing them. And because the material is smooth, there is little chance that the slurry will stick to the impeller and clog the pump.
Slurry Pump Polyurethane Liners have Cover plate liners, Frame plate liner, The liners are together with throat bush and Frame plate liner insert form a pump chamber, The impeller works in it. The polyurethane liners are generally made of polyurethane without steel skeleton. But the polyurethane impeller, throat bush and frame plate liner insert are embedded the steel skeleton.
Casing SP25092A05 is used for 250 TV-SP Vertical Slurry Pump and has a simple bolt-on attachment to the base of the column, Vertical Slurry Pump Casing is in a heavy walled abrasive resistant high chrome alloy for a variety of submerged suction pumping applications.
250TV Vertical Cantilever Pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump.
P/N: 24022-01-30A(651120206) Casing is one of the best important parts for Mission Magnum XP 14X12X22 Centrifugal Pump.
Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Design Features:
Full-open wide impeller.
Long life no adjustment mechanical seal available for near zero leakage.
Thick, concentric casing with replaceable casing wear pad.
Hard iron and high chrome alloy material optional.
â Large power to ensure large flow rates and head pressure up to 500ft.
Small footprint design is versatile for mobile and stationary application.
Heat treatment was done to improve the hardness and wear-resistance to ensure a longer working life.
Shaft sleeves are made by 416SS and ceramic coating to protect shaft from abrasive fluids for extra lifeilicone, or Silicone-Carbide, all with highly polish sealing face and piton bellow and stainless steel springs.
â?? 100% compatible with NOVâ?¢ Missionâ?¢ Magnumâ?¢ XP, MCM XL series and current market offerings.
The pumps can be unitized with Ex-proof electric motors, diesel engines in-line or over-belt driven configuration.
Bare Shaft Mission XP Blender Pump Information:
BT-650120009/ 14 x 12 x 22 Hard Iron Centrifugal Pumps, Mechanical Seal
BT-650120010/ 14 x 12 x 22 High Chrome Centrifugal Pumps, Mechanical Seal
BT-666001001/ 12 x 10 x 23 Hard Iron Centrifugal Pumps, Mechanical Seal
BT-666001007/ 12 x 10 x 23 High Chrome Centrifugal Pumps, Mechanical Seal
BT-666001005/ 8 x 6 x 18 Hard Iron Centrifugal Pumps, Mechanical Seal
BT-666001006/ 8 x 6 x 18 High Chrome Centrifugal Pumps, Mechanical Seal
P/N: 24024-X0-HS (662005003) High Chrome Impeller for Mission Magnum XP 14x12x22 Centrifugal Frac Pump.
Mission Magnum XP Blender Pump and MCM XL Pump are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume mobile and stationary applications where a small footprint is critical. High chrome alloy or hard iron material options for different applications.
XP/XL Centrifugal Pumps Main Parts:
Heavy Duty Pedestal â?? heavy duty frames are manufactured from cast iron for high strength and durability to withstand high piping loads.
Casing The Mission XP/XL frac pump has been beefed up in critical wear areas for extra life. The concentric housing eliminates vibration, turbulence, cavitation, and reduces bearing load and shaft deflection.
Impeller (Open Vane Design) Mission XP/XL pump open vane impeller design is engineered to reduce turbulence, eliminate recirculation, lower radial and thrust loads, and provide a smooth flow of fluid through the pump.
Wear Plates The Mission XP/XL pump casing comes with replaceable wear plates. This feature reduces the maintenance costs of housing replacement by merely replacing the wear plates.
Shearing Ring- Mission XP pump offers a shearing ring option to convert a regular centrifugal pump to a shearing pump for special mud applications.
Mechanical Seals Mission XP/XL pump takes pride in carrying one of the finest mechanical seals on the market, whether it be Tungsten-Tungsten, Tungsten-Silicone, or Silicone-Carbide. They come with a highly polished sealing faced and with piton bellows and stainless steel springs.
Pump Bearings Mission XP/XL pump uses nothing but the best and the finest bearings in its pumps. The outboard bearing assembly consists of a pair of angular contact bearings with high thrust load ratings and zero end play. The heavy duty inboard bearing is a double row ball bearing with high radial load ratings to compensate for the larger size impellers and heavy duty applications.
Labyrinth Seals (optional) Mission XP pump installs labyrinth seals by customer request in all its pumps to isolate the bearings from harmful contaminants while keeping bearings lubricated.
H19117-01-30A Casing is an important Wear Parts for Mission 8x6x142500 Supreme Centrifugal Pumps.
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Fluid end parts available with Supreme Hard material that has a 400 Brinell hardness. The standard impeller, casing wear pad and stuffing box are Ductile Iron to ensure even wear characteristics.
Casing provided with replaceable casing wear pad on 4x3x13 â?? 10x8x14 models.
Design Features:
Versatile stuffing box Thick, strong, concentric casing with replaceable casing wear pad
Casing gasket receded for protection.
Replaceable stuffing box cover with dual stuffing box bolts
Long-life, no-adjustment mechanical seal available for near zero leakage
Replaceable shaft sleeve
Solid Frame base
Labyrinth seals for maximum bearing protection
Duplex angular contact bearings
Full pipe diameter entrance for minimum turbulence and maximum efficiency
Wide semi-open impeller creates lower axial thrust for improved bearing life
All sizes feature the same power end
Gravel Pump Impeller FG10137A05 apply to 12/10 G-G Gravel Pumps, compared to slurry pump impeller, gravel pump impeller has larger internal profile that allows bigger particles for handling the most difficult higher abrasive slurries.
The gravel sand pump impeller is easy to be worn out, so we researched the special materials to prolong the lifespan of gravel pump impeller, hyperchrome alloy is one of them, aims at handling the river sand with strong abrasion or sharp particles.
Tobee volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Materials are A05, A49, A33, Natural Rubber , Polyurethane...etc, to meet different working duty.
Tobee Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.
Pump model: AH, HH, L, M, SP, G/GH, AF
Materials: A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Vertical slurry pump named vertical spindle pump, Vertical sump pump, vertical cantilever pump. vertical submerged pump. Vertical sewage pump, Column pump as well.
Metal Model: 40PV-SP, 65QV-SP, 100RV-SP,150SV-SP, 200SV-SP, 250TV-SP, 300TV-SP
Wet End parts:
Pump Impeller SP40206A05, SP65206A05,SP10206A05, SP15206A05, SP20206A05, SP25206A05, SP30206A05
Pump Casing SP40092A05, SP65092A05, SP10092A05, SP15092A05, SP20092A05, SP25092A05, SP30092A05
Pump Back liner SP40041A05, SP65041A05, SP10041A05, SP15041A05, SP20041A05, SP25041A05, SP30041A05
Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR,150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR
Wet End parts:
Pump Impeller SPR40206R55, SPR65206R55, SPR10206R55, SPR15206R55.
Pump Casing SPR40092, SPR65092, SPR10092, SPR15092,
Pump Back liner SPR40041, SPR65041, SPR10041, SPR15041,
Impeller O-ring RV064-S10, Discharge Pipe Gasket SP10204, Rubber Back liner Seal E4124S01
FP40-400 Double-Flow Axial Split Case Pump with efficiencies of up to 91%, split case pumps help to save valuable energy. All pumps are fitted with a double-flow radial impeller which achieves very favorable NPSH value.
Centrifugal Pumps are operating successfully all over the world. They offer robustness and wear resistance and thus fulfil high customer expectations in terms of efficiency, life cycle, maintenance friendliness and economic efficiency.
Fields of application:
Cooling water, circulation water pumps
Power stations industrial plants
District heating networks
Raw water pumps for water treatment
Plants Drinking water pumps for water
Supply systems
manufactures alternative ACP, S, VP, FP, CP series Paper & Pulp Stock Pumps and Pumps Wearing Spares, all the pumps and spares parts are widely for Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.
pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc
S series Centrifugal Pump S100-350 pump front lining is made of 1.4460 material, and Tobee s S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc.
Tobee 150MC Slurry Pump Spare Parts 4 vanes Impeller FMC15145EL1A05 can easily pumping large size particles in dense abrasive slurries and offers the right combination of ruggedness, durability, hydraulics and materials.
Tobee�® MC Mill Circuit Duty Slurry Pumps are interchangeable with MC/MCR mill circuit pumps easily manage large size particles in dense abrasive slurries and are specifically designed for the most severe slurry applications such as ball and SAG mill cyclone feed plus water-flush crushing in mineral processing plants. They are also suitable for use as slurry transfer pumps on arduous applications such as gravel dredging or coarse coal cyclone feed.
MC Mill Circuit Pump hydraulics are based on more than 25 years of fundamental and applied research and backed up by wear performance field trials. Unique design and wear evaluation software ensures high efficiency and optimum life.
MC Mill Circuit Pump designs incorporate the latest in hard alloy and elastomer technology, extending wear life in highly abrasive and corrosive slurries.
The T-MC range mill circuit pump is engineered to enable different material combinations:
T-MCR pump â?? elastomer liners inside ductile iron outer casing with metal impeller and metal or elastomer throatbush and frame plate liner insert
T-MCU pump â?? all metal unlined hard white iron casing with metal impeller, throatbush and frame
plate liner insert
T-MCM pump â?? hard white iron metal liners inside ductile iron outer casing with metal impeller, throatbush and frame plate liner insert
MC Pump Detailed Features:
Large diameter, low speed, high efficiency impellers
Latest wear resistant materials
Interchangeable elastomer or metal liners, or unlined metal
Simple full face side liner adjustment
Self centering stuffing box design
Fast one-piece wet-end changeout on larger sizes
Reverse rotation also available to minimize wear in special sump orientations
Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc.
Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Tobee manufacture replacement Andritz S series Pumps and Parts, Andritz ACP series Pumps and Parts, Andritz FP series Pumps and Parts, Andritz VP series Pumps and Parts, Andritz CP series Pumps and Parts etc.
Tobee�® manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps, VP series pumps, CP series pumps etc.
Tobee ACP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Andritz ACP Paper Pump Performance Parameters:
Size: 1"-16" Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: 120
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
Andritz ACP Paper Pump Design Features:
Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
Shaft seal - Mechanical seals and packing seal can be used as per requested
Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Tobee mainly manufacture Andritz Paper Pulp Pumps and Spares Parts, such as Andritz ACP, S, CP, VP, FP etc paper pulp pumps and Andritz Spares Parts.
Tobee�® Andritz Single-stage Centrifugal Pump Specification:
Pump type: Horizontal
Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel
Seal arrangement: Mechanical Seal, Double Seal
Max temperature: 200 Celsius
Tobee�® ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200â??
Efficiency:up to 90%
Tobee�® Pump is always making continuous optimization of materials like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, Viton, Fluoroplastic, Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive & corrosive materials for various applications.
Such as impeller: EN-GJL 250, 1.4460 and 1.4517, casing/casing cover: EN-GJL 250 and 1.4460, volute casing: EN-GJL 250, EN-GJS-400-15 and 1.4460, bearing housing EN-GJL 250 and 1.4468, front and rear lining: 1.4460 and 1.4517, stuffing box body EN-GJL 250, 1.4460 and 1.4408, shaft: 1.4021 & 1.4462 and 1.4404 & 1.4439, etc.
Hydroman TJQ Submersible Slurry Pumps are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors. Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation.
Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components)
heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of the MAGNUM I pumps.
Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6 5 1 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Mission Sandmaster Pump Designs:
Compact heavy-duty frame design for small space;
Multiple application in the oil and gas industrial;
Full open impeller reduces shaft loading;
Replaceable stuffing box cover,
Available in hard ductile iron, high chrome alloy fluid ends(casing, impeller, wear pad, stuffing box), customized fluid ends in stainless steel or aluminum bronze acceptable;
Available in 8 different size, 3x2, 4x3, 5x4, 6x5, 8x6, 10x8;
One-piece concentric and thicker casing with same power end;
SKF bearings or equal;
Oil or grease lube available; oil lube is for speeds in excess of 2400rpm; 3500rpm is available for 3x2x13 and 4x3x13 pump;
Completely interchangeable with Mission Sandmaster and MCM Mud Master and all other popular brand design in the market;
Spare parts are interchangeable with the standard model.
The pumps can be unitized with hydraulic motors driven.
Sandman Crane Type Mechanical Seal 24036 (658416102) can be used for Mission Magnum XP series centrifugal pumps from 8x6x18, 12x10x23 and 14x12x22 XP Frac Pumps.
Mission Magnum XP Blender Pump and MCM XL Pump are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume mobile and stationary applications where a small footprint is critical. High chrome alloy or hard iron material options for different applications.
Tobee manufacture the Andritz replacement Pump Spare Parts Front Lining ACP300-700 and full 100% warranty and reliability.
Pump Rubber Cover plate liner is the main wear parts for the rubber lined slurry pump. It forms a pump chamber with frame plate liner and throat bush to contact with , As one of main wetted parts, Cover plate liner is very easily worn-out components because it works under longtime impact of abrasive and corrosive in the high speed conditions, So the materials is very crucial to lifetime of complete pump, provides a complete rubber and metal materials selection for most all duties in mill.
SPECIFICATIONS:
Size: 18 x 16
Capacity: 2160-5040m3/h
Head: 8-66m
Speed: 200-500rpm
NPSHr: 4.5-9m
Eff.: 80%
Power: Max.1200kw
Handling solids: 135mm
Seal arrangement: Packing seal, Expeller seal, Mechanical seal
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Hydroman Hydraulic Slurry Pump Description:
Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Hydraulic Slurry Pump with Agitator for Pumping Sand
Hydroman Hydraulic Submersible Slurry Pump Description:
Hydroman THY Hydraulic Submersible Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The THY hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
TG14x12T Gravel pump is interchangeable with 14/12T-G Pump. It is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Its wear parts made from high chrome alloy, The hardness can upto HRC65, Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
14/12T-G Gravel Pump Design Features:
Bearing assembly - Large diameter shaft with short overhang contributes to long bearing life.
Liners - Easily replaceable liners are bolted, not glued to the casing for positive maintenance.
Casing - Casing halves of cast or ductile iron provide high operating pressure capabilities.
Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Throat bush - Wear is reduced and maintenance simplified by the use of tapered.
Description
Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump. It is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Tobee manufacture replacement Andritz S series Pumps and Parts, Andritz ACP series Pumps and Parts, Andritz FP series Pumps and Parts, Andritz VP series Pumps and Parts, Andritz CP series Pumps and Parts etc.
Tobee�® manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps, VP series pumps, CP series pumps etc.
Andritz ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%.ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3 2 13 through 8 6 14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachromeâ?¢, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Tobee 100RV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 100RV SP Vertical Acid-resistant Slurry Pump can be named metal lined metallurgy sump pump, vertical sump mining slurry pump, vertical slag slurry pump, vertical slurry sewage pump, chemical melting hot salt pump, etc
Tobee Vertical Slurry Pump called Spindle pump, sump pump, column pump, cantilever pump, submerged pump, open-pit pump, Vertical pumps as well. 100RV vertical spindle slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.
Description
EN 1.4474 SS Front Lining for Andritz ACP 150-400.5 Centrifugal Pumps used in sugar industry.
Andritz ACP series Pumps and parts: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700.
ACP Centrifugal Pump Design:
Impeller(230) Accelerating the medium by charging it with energy.
Semi-open impeller with vanes on the back.
Hydromanâ?¢ Hydraulic Submersible Sand Pump for River Dredging is a hydraulic machinery with mixing function,designed to utilize the performance of hydraulic motor to the utmost for the site where the electric power source canâ??t be supplied. Hydraulic sand pump is suitable for conveying media containing various particle sizes of solid particles such as sediment, cinder, tailings and ore sand. Submersible hydraulic sand pump is mainly used for dredging and dredging of metallurgy, mines, thermal power plants, iron and steel, water treatment, sand mining, mining, ports, rivers, lakes and ponds; The suction and transportation of sediment media such as port construction and Hydraulic Reclamation of rivers, seas and beaches are ideal substitutes for traditional mud pumps. The whole set of equipment can be flexibly matched with other equipment, such as hydraulic station, excavator and loader, so as to break the power restriction and transfer flexibly, especially for construction in remote areas.
mainly manufacture Paper Pulp Pumps and Spares Parts, such as ACP, S, CP, VP, FP etc paper pulp pumps and Spares Parts.
Single-stage Centrifugal Pump Specification:
Pump type: Horizontal
Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel
Seal arrangement: Mechanical Seal, Double Seal
Max temperature: 200 Celsius
Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Series Paper Stock Pumps are widely used in papermaking, pulp mills, pulp medium of transportation, also applies to enterprise sugar, starchprocessing, chemical raw materials, such as the transmission medium.
Available Interchangeable S Pumps Models and Spares:S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc
100% Equivalent S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for S series paper-pulp pumps.
Andritz ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
Andritz ACP Specifications:
â?¢ Flow rates up to 6,000 m�³/h
â?¢ Heads up to 160 m
â?¢ Casing pressure up to 25 bar
â?¢ Temperatures up to 200�°C
â?¢ Consistencies up to 6%
â?¢ Efficiency up to 90%
Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content with consistencies of up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ANDRITZ single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. ANDRITZ centrifugal pumps from the ACP series can be delivered with and for an Industrial Internet of Things upward integratable base.
Tobee Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
Hydroman Submersible Sand Dredging Pump Description:
Hydroman Submersible Sand Dredging Pumps are suitable to be used for pumping sand. Sand is pumped mixed with water up to 70% of solids by weight. The mixture of liquid and particles of sand and gravel is pumped in a procedure often used as a convenient way of handling sand and gravel. There are many applications for submersible sand pumps: sand and gravel extraction, dredging of rivers, harbors and marines maintenance or construction, beach reclamation, filling of Geotubes, among others. Here below you can read about some of the multiple applications of sand pumps.
Hydroman Stainless Steel Submersible Slurry Pump Description:
Hydroman Stainless Steel Submersible Slurry Pumps are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman�® submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel , meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman Hydraulic Submersible Slurry Pump Description:
Hydroman THY Hydraulic Submersible Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman�® pumps deliver massive solids production at very low operational costs. The THY hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Hydroman Submersible Sludge Sewage Pump with Control Panel Description:
Hydroman Submersible waste water sludge pumps are a popular type of submersible water pump used in pump station of wastewater collection system, submersible sludge pump is compact and often less costly to install than other pump types. Being a below grade installation, these submersible sludge pumps do not obstruct sight lines and are virtually silent during operation.
Submersible waste water sludge pumps with control panels will be more energy saving, because the control panel can control the submersible slurry sludge pump reduce or increase the capacity based on demands at any one time, which can have a major positive impact on the submersible pump's lifetime cost.
Hydroman Electric Driven Submersible Slurry Pumps to Remove Sludge from Mine are required to remove or reduce this water collected in quarries from both rainwater and groundwater seepage from the active parts of the quarry to allow mineral extraction to continue. The quarry is a challenging environment for pumps to work in. Often large volumes need moving over a long period of time. The water will often contain mud or abrasive aggregate particles. And of course, the quarry operator has to satisfy the planning and environmental agencies in relation to site discharge and noise, and also keep the neighbours on side, So submersible mine dewatering sludge pump plays a central role in the mining process, assisting with everything from abrasive sludge dewatering through to mineral processing, reagent dosing, slurry transfer, waste water, water supply and boosting, tailing transfer and more.
Why Choose Hydromanâ?¢ Electric Driven Submersible Slurry Pump to Remove Sludge from Mineï¼?
Submersible Sludge Pump can directly submerged in water to workï¼?there was no any noise.
Submersible Mine Dewatering Pump driven by electric power and hydraulic and so on a variety of driving, reduced the problem of insufficient power conditions to drive the pumps.
Submersible sludge pumps are engineered to move easilyï¼?can be changed to other industrials and minings whenever necessary.
Electric submersible motors are all Class H insulated and have a minimum 1.25 service factor.
Temperature sensor, embedded in the electric motor, and Moisture sensor, in the oil chamber, are available options to protect the pump in the most demanding application.
Submersible slurry pump is designed with replaceable wear parts: casings, impellers, wear plates all can be replaced independently as necessary.
Hydroman Electric Driven Submersible Slurry Pump to Remove Sludge from Mine are engineered for heavy duty performance in challenging applications for mining, construction, tunnelling and other demanding industries with high performance requirements.
Tobee 4x3C-AH Slurry Pump with ceramic shaft sleeve C075J04 that widely used as ash handling pump in as handling system in power plant.
Slurry Pump Ceramic Shaft Sleeve, which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and down-time were reduced accordingly. Tobee's slurry pump ceramic shaft sleeves are precision formed of high density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower co-efficient of friction, results in extended sleeve life and long service from the packing.
One of the problems of concern to operators of centrifugal slurry pumps is the wear of shaft sleeves and the deterioration of packing material in the gland.
This matter has also been under study by the Materials Research and Development Department of TOBEE PUMP for some time. The result is the development of a shaft sleeve of much superior wearing qualities.
Tobee Slurry Pump Ceramic Shaft Sleeve, which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and down-time were reduced accordingly.
Slurry Pump Steel Shaft Sleeve has always been the here-to-fore accepted material for shaft sleeves for most centrifugal slurry pumps. However, steel in shaft sleeves is subject to pitting, fritting and wear that often results in short part life. So Tobee Pump developments of a ceramic coating shaft sleeve of much superior wearing qualities.
Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings.
10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries, 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
Hydroman Stainless Steel Submersible Slurry Pump Description:
Hydroman Stainless Steel Submersible Slurry Pumps are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman�® submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel , meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman Electric Submersible Sand Pump Description:
Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Hydroman Submersible Sand Pump Description
Hydroman Submersible Sand Pumps specifically designed for handling slurries with a high content of abrasive solids. The dredge pumps have been extremely successful for clients operating in specialized sectors who face severe conditions and solve very difficult applications. The electric dredge pumps are positioned as submersible dredge pumps for marine and energy sectors as well a in mining for minerals and other materials. Handling slurries with up to 70% solids content and specific gravity up to 1.7, with a capacity of up to 5,300 gpm at 275 feet of head.With high chrome wear parts and specially designed, grease packed lip seals, the dredge pumps are manufactured with exceptional structural quality to maximize the benefits of the customer's initial investment and achieve low maintenance and service costs.
B1052U38 Slurry Pump Polyurethane Impeller is used on small slurry pump 1.5/1B-AHR. Expand work life 3-5times than normal standard R55 material.
Slurry pump impeller is the main component in centrifugal slurry pumps which has vanes to impart and direct the centrifugal force to the slurry. Slurry pump impeller is also the most diverse component in slurry pumps, by changing impeller, the same slurry pump can cover more different duties.
Slurry Pump Polyurethane Parts(commonly abbreviated PU) is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. It allows the engineer to replace rubber, plastic and metal with the ultimate in abrasion resistance and physical properties. Polyurethane can reduce plant maintenance.
Urethane abrasion and tear resistance are much better than rubbers, while offering higher load bearing capacity. Compared to plastics, urethane offer superior impact resistance, while offering excellent wear properties and elastic memory. And, PU is advance in weight reduction, noise abatement and wear improvement than metal slurry pump parts.
Tobee 12/10 FG River Stone Suction Pump 3 vanes Closed type Impeller FG10137A05 which specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
Labyrinth FAM06210D81
Description
Equivalent Andritz S 150-330 Open Impeller Pump with mechanical seal cover the requirements for municipal and for industrial wastewater disposal.
Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Hydroman Stainless Steel Submersible Slurry Pump Description:
Hydroman Stainless Steel Submersible Slurry Pumps are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel , meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman Electric Submersible Sand Pump Description:
Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Hydroman Heavy Duty Submersible Sand Pumps are designed for moving slurry, sand, and other material with ease and without clogging. Submersible slurry pumps and submersible sand pumps from Hydroman offer the highest in quality and strength over other submersible pumps.The advantages of submersible sand pump is simple operation, self-mixing operation, strong anti-abrasiveness, energy saving, environmental friendly, low noise and low failure rate.Hydroman has offered products such as submersible sand pumps with a high-pressure water jet, large-particle submersible sand pump, submersible sand pump with side cutters, hydraulic driven submersible sand pump with side cutters, stainless steel submersible slurry pump and deep-well submersible sand pump.
Hydroman Submersible sewage sludge pump is used for civil and industrial non aggressive waste water, municipal works, industrial buildings, hotels, hospitals, civil air defense, mines etc., suitable for drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics. Especially effective in returning activated sludge in wastewater treatment works, temporary sewage bypass pumping and emptying polluted excavations or tanks, these units are robust in design and capable of delivering months of continuous operation with no maintenance requirements.
Hydroman has the proven experience and submersible pumps to provide reliable and efficient solutions for handling sludge,so we can offer a complete range of high-quality submersible sewage sludge pumps made for dewatering, moving mud, clay, sludge, light slurry, tank clean-outs, trench & pond cleaning, and mining applications.
Vertical Slurry Pump called Spindle pump, sump pump, column pump, cantilever pump, submerged pump, open-pit pump, Vertical pumps as well. 100RV-SP/SPR vertical spindle slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.
Tobee Alternative S series Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc
Single-stage Centrifugal Paper Making Pumps Specification:
Pump type: Horizontal
Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel
Seal arrangement: Mechanical Seal, Double Seal
Max temperature: 200 Celsius
Tobee�® Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
S series centrifugal pumps are available with closed, semi-open or open impellers in a highly wear-resistant design. The S series pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ANDRITZ single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. For more information on our single-stage centrifugal pumps from the ACP and S series please have a look at our brochures in the sidebar or contact us directly.
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of theMAGNUM I pumps.
Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6Ã??5Ã??11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Tobee Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Tobee Mission Magnum 8x6x18, 12x10x23, and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, and corrosive. An excellent choice for high-volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life by approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy-duty bearings are per
Description
19122-01-30A Casing is an important Wear Parts for Mission Magnum 6x5x11 Centrifugal Pump.
All of the pumps feature a concentric casing. This casing averages 37% thicker than conventional pump casings, and up to 50% thicker for the larger, mud pumping models. They are pressure rated at 1 .5 times the flange rating and are designed with a 1 /8 erosion allowance. The concentric style casing has proven to offer the greatest pump life and reduced downtime. The walls of a concentric style casing are an equal distance from the impeller throughout the impeller circumference, which results in a smooth flow pattern. A volute style casing has a cutwater point that disturbs the fluid flow pattern creating an eddy. The concentric casing eliminates vibration, turbulence and aeration that is caused by the cutwater point in conventional volute pumps. It also reduces the high bearing loads and shaft deflection even at near shutoff flows.
The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications.
The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Tobee 100RV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee�® 200SV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available.
Tobee 40PV-SP Vertical Slurry Pumps Performance Parameters:
Size: 40mm
Capacity: 19.44-43.2m3/h
Head: 4.5-28.5m
Max. power: 15kw
Handing solids: 12mm
Speed:1000-2000rpm
Submerged length:900-2500mm
Materials:High chrome alloy, Rubber, Polyurethane etc.
150SV-SP Vertical Slurry Pump is available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in Minerals processing, Coal preparation, Chemical processing, Effluent handling, Sand and gravel and almost every other tank, pit or hole-in-the ground slurry handling situation.
Tobee 200SV-SP Vertical Pumps and spare parts: Pump casing SP20092A05, Pump impeller SP20206A05, Pump F.P.L. Insert SP20041A05, Seal parts: SP15116-1, SV025, SP20204, F8124, etc.
Tobee�® 200SV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
200SV-SP vertical spindle sump slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Mainly SP Metal Lined Vertical Sump Pump Parts:
Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel.
G refers to submerged depth 1200mm;
J refers to submerged depth 1500mm;
L refers to submerged depth 1800mm;
M refers to submerged depth 2000mm;
Q refers to submerged depth 2400mm;
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Upper Strainer - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. Lower Strainer - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Tobee�® 150E-L Slurry Pumps Performance Parameters:
Size: 150mm
Capacity: 115-568.8m3/h
Head: 10.5-51.8m
Pressure: Max. 250psi
Density: Max.1.35
Materials: Hyper chrome alloy, Rubber, Polyurethane etc.
Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc.
Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling high abrasive, high density slurries.
Design Features
Bearing assembly - a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Volute Liners - easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
Elastomer seal rings back all liner joints.
Pump casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
Tobee 4/3E-HH High Head Slurry Pump is fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps. The high heads along with sturdier wear parts makes these pumps some of the most rugged in the slurry pump line. Extensive exterior ribbing allows for higher heads to be reached with a single slurry pump, and bulked up wet end parts handle the toughest applications in the field today.
Design Features:
Ductile iron fully lined casing provides durability, strength and long service life.
Multi-stage high pressure operation to 750 psi.
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to maximize wear life and lower operating costs.
Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life.
Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Tobe 16x14TU-AH Slurry Pumps provide a ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application need to transport heavy duty abrasive and corrosion medium.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime
Ductile iron fully lined casing provides durability, strength, safety, and long service life
Large diameter, slow turning, high efficiency slurry pump impellers designed to achieve maximum wear life and low operating costs
Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the slurry pump, resulting in reliable operation and prolonged bearing life
Tobee 14x12ST-AH Slurry Pump is made for high wearing and heavy duty applications. 14x12 slurry pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the toughest and most abrasive applications.
Design Features:
Power End
Labyrinth bearing isolators to protect internal components during wash-down cycles.
Clearances can be easily adjusted to maintain efficiency while optimizing performance and extending wear life.
Over-sized, self-aligning spherical roller bearings for trouble free operation.
Heavy duty bearing assembly, 50,000 hour minimum L10 bearing life, Distortion free bearing clamp system ensures maximum bearing life and prevents premature fatigue.
Tobee 6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6x4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids.
Design Features:
Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely.
Interchangeable anti-abrasive wet parts made of high-chrome alloys.
The discharge branch can be oriented to any eight positions at the interval of 45 degrees.
Various drive types: DC (direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control etc.
The shaft seal uses the packing seal, expeller seal and mechanical seal.
Tobee TL(R) FGD Limestone Slurry Pump is the new generation high efficiency energy saving pump product elaborately researched and developed by Tobee through absorbing the technical advantages from similar FGD pumps from domestic and abroad, with reference to the technical specifications of flue gas desulfurization project, aiming at the characteristic of FGD system of transporting medium through pump in thermal power plant.
Design Features:
Excellent performance and comparatively high reliability and stability.
Simple structure, convenient maintenance and reliable operation.
Excellent performance of corrosion resisting and wear resisting, suitable for transporting different PH medium.
The bearing body adopts tubular structure, which will adjust the bearing parts to change the position of impeller in the pump cavity and make the pump be always under high efficiency operating status.
The shaft seals can be classified as filler seal, dynamic seal and assembled mechanical seal specially used for desulphurization technology to facilitate users to select suitable shaft seal according to actual condition. It is easy to be installed and maintained without connecting clean industrial flushing water.
Tobee DT Series FGD Gypsum Slurry Pump is a single stage, single suction horizontal centrifugal pump. Mainly used as the circulating pump for absorbent tower in FGD system. It has the advantages of wide range capacity, high efficiency, better energy saving etc,The wetted parts are designed with the CFD fluid simulating analysis technology to ensure its high-efficiency operation. DT series FGD slurry pump is optimal pump type for transporting gypsum slurry, limestone slurry or other abrasive and corrosive medium in thermal power plants.
Design Features:
DT series FGD slurry pump wetted parts adopt the advanced flow simulation technology to guarantee reliable design and high operating efficiency.
Corrosion resistant and wear resistant metal and rubber materials for options.
The special integrated mechanical seal design is suitable to Thermal Power Plant Fuel Gas Desulphurization process.
The bearing at pump end is double-row taper roller bearing, and bearing at drive end is cylindrical roller bearing. The bearings are lubricated with oil to longer the service time.
Achieve highest efficiency all the time by adjusting the bearing components to alter the impeller position in pump chamber.
The pump can be disassembled without dismantling suction or discharge pipes.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Ductile iron fully lined casing provides durability, strength, safety, and long service life.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs.
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.
Designed for rugged duties while offering excellent efficiencies.
Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings.
Design Features:
Modular design for ease of maintenance.
Medium duty one piece frame base with lifting points for easy maintenance.
Standard ductile iron outer casings for higher working pressures and incorporating lifting points.
Standard or advanced bearing assembly improves reliability to extend bearing life reduce lubrication costs.
Shaft sealing for increased reliability, stuffing box, expeller, elevated seal or mechanical seal options available.
Standard or advanced impeller design options available.
Allows ease of fitting multiple liner materials, including hard metal, thick section rubber or polyurethane.
Single piece sleeve for stuffing box sealing, lowers stock holding and maintenance.
Multi-purpose design allows for reduced inventory requirements and interchangeability.
Belt guards allows for ease of maintenance and inspection of belt condition.
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Design Features:
Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers, from which Weir Minerals selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance and where larger particles or high density slurries are encountered.
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Design Features:
Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers, from which Weir Minerals selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance and where larger particles or high density slurries are encountered.
Tobee SPR Rubber Lined Vertical Slurry Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters. Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe. The wet parts of SPR vertical sump pump is interchangeable with the SP series hard metal lined heavy duty sump pumps.
Design Features:
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Tobee 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Design Features:
Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings.
Large Particle - Large particle impellers are also available and enable passing unusually large solids.
Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft.
Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures.
Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered.
Tobee 250TV-SP Vertical Slurry Pump is no submerged bearings or seals heavy duty cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms.
Design Features:
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
Tobee GH High Head Gravel Pumps are Capable of handling large particles at consistently high head, high pressure, long distance, resulting in lower costs. Casing is designed with a large volume internal profile to reduce associated velocities which prolong component life. Designed to pump extremely aggressive gravels with a wide particle distribution. The GH gravel pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications.
Design Features:
Modular design for ease of maintenance.
Large passage width designed to minimise internal velocities resulting in prolonged wear life.
Lifting points for easy maintenance.
Standard or advanced bearing assembly improves reliability to extend bearing life reduce lubrication costs.
Shaft sealing for increased reliability, stuffing box, expeller, elevated seal or mechanical seal options available.
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3213 through 8614 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachromeâ?¢, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Design Features:
Up to 50% more capacity from the 8 x 6 pump
Optimum pressure at low operating speeds
Thicker casing to extend life from wear and corrosion
New impeller design to reduce loads and extend bearing life
Larger, stronger shaft to reduce deflection
Replaceable shaft sleeve in packing wear area
Larger, long-life bearings
Replaceable stuffing box cover
Smoother, non-turbulent flow throughout casing
Tobee Mission 2500 Supreme Centrifugal Pump has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Design Features:
Versatile stuffing box
Thick, strong, concentric casing with replaceable casing wear pad
Casing provided with replaceable casing wear pad on 4x3x13 - 10x8x14 models
Replaceable stuffing box cover with dual stuffing box bolts
Long-life, no-adjustment mechanical seal available for near zero leakage
Replaceable shaft sleeve
Solid Frame base
Tobee Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Design Features:
Full-open wide impeller.
Long life no adjustment mechanical seal available for near zero leakage.
Thick, concentric casing with replaceable casing wear pad.
Hard iron and high chrome alloy material optional.
Large power to ensure large flow rates and head pressure up to 500ft.
Small footprint design is versatile for mobile and stationary application.
Working for fracking industrial standard and blending application.
Each casing is approved pressure test prior to delivery.
Tobee 18x16TU-GH High Head Gravel pump is designed for continuously handling for large particles of slurries, sands, gravels, stones with high head applications, The main wear parts made from high chrome alloy, The hardness can upto 65HRC, Working life is 30% increasing than other common slurry pumps, 18x16 dredge gravel pump widely used for cutter suction dredges, sand dredgers, sand Excavation, sand reclamation, sand barge loading etc.
Design Features:
18x16 dredge gravel pumps are designed for gravel and sand dredge from river and/or sea, as well as large particle pass in mining operations.
The unique segmented clamp ring on larger size units and solid on smaller pumps,facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimizing suction side recirculation.
Tobee 16x14TU-GH High Head Gravel pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high head, high pressure results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
Broad path created by single casing and clamp bands connection
Unique design to make maintenance and wet parts replacement convenient.
The wet parts are made of Ni-hard and high-chrome wear-resistant alloys with good anti-corrosive property.
The discharge direction of pump can be oriented in any direction of 360�°.
The standard seal type is packing seal.
Good performance of NPSH.
Tobee 12x10G-GH High Head Gravel Pump is the worldâ??s standard pump for dredge and gravel with high pressure applications. The 12x10 pump performance range provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications.
Design Features:
Impeller - Pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination
NPSH - Exceptional NPSHr conditions due to large impeller eyes
Large Particles Large eye openings and vane passages allow for the largest particle flows
Expeller (Centrifugal Seal) - Available with low flow water flush or zero flow (grease lubricated) options to provide exceptional sealing where water introduction to the seal is intolerable or limited
Tobee 10x8S-GH High Head Gravel Pump is designed for continuously handling the most difficult high abrasive, big particles slurries with extra high head. The wet parts are made of high-Chrome alloys to ensure long service life. GH gravel pumps has far better performance than common gravel pumps in dredging, sand mining, barge loading and mineral processing etc.
Design Features:
GH high head gravel pump is cantilevered horizontal centrifugal pump designed for handling the most difficult higher abrasive slurries which contain too big solids to be pumps by a common slurry pump.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.
The discharge direction of pump can be oriented in any direction of 360°.
closed impeller with wide passage, good performance of NPSH and abrasion resistance.
All the wet parts are made of wear resistant high chrome alloy material. They are suitable for delivering slurry in mining, metal melting, dredging, barge loading.
Tobee 18x16TU-G Gravel Pump is designed for continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump, The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, Other industries.
Design Features:
The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design.
Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Tobee 12x10F-G Gravel Pump is a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy assembly, The discharge outlet can be adjusted at any direction, It is world's standard for dredge, gravel or large particle slurries applications.
Design Features:
Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving.
Large dredging sand depth, high density of dredging mud, good pump NPSH and strong suction lift ability.
Strong through-put, The dredging pump can persistently discharge gravel, high plastic soil lump,etc.
Wide application, The sand pump can be used in various kinds of soil quality.
The TG sand pump can be directly matched with electric motor or diesel engine.
The TG sand pump impeller is 3 or 5 vanes for large particles delivering.
Little hydraulic loss, high efficiency and low oil-consumption.
Steady operating, little vibration, low noise.
Simple & reliable constriction, easily disassembly & assembly, convenient maintain.
Reliable sealing without leakage.
Long operating life of wear parts.
Tobee WN Dredge Pumps are single-stage single suction cantilever horizontal centrifugal pumps with advantages of light weight, good wear-resistance, super dredging performance, WN dredging pumps impeller passage is very wide, It can continuously transport gravels or high plastic clay and not happens jam, Especially for dredging sands and damming of the river and seas.
WN Series Dredge Pumps can be also integrated with the gearbox, That mean the pump and gear box share one common shaft. So It doesn't need the pump bearing assembly and frame, In this way, Not only save space, but also reduce cost and breakdown ratio, Let the dredge pump give play to maximum effectiveness.
Design Features:
Construction
WN200 to WN500 dredge pumps are of single casing, single stage cantilevered horizontal centrifugal pumps. Two types of coupling with gear box: frame and pump box.
WN600 to WN1000 dredge pumps are of double casings, single stage cantilevered centrifugal pumps.
These pumps are equipped with frame and lubrication is force thin oil. The design of double casing the pump working till the volute liner almost worn down and guarantee no leakage when volute liner is worn down.
Tobee WN1000 Dredge Pump is single-stage single suction cantilever horizontal centrifugal dredge pumps with advantages of light weight, good wear-resistance, super dredging performance, perfectly suited for the dredge on the whole construction, high multiple economy benefits, etc, It throughout meets requirements of the dredge to dredging pumps.
Design Features:
Overall structure performance well in marine use
WN1000 dredge pump with a double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.
Tobee WN900 Marine Dredge Pump is one type of horizontal centrifugal dredging pump. It is mainly used for dredging in river, lake, seaport, lagoon, pond, reservoir etc. And it is usually installed in dredgers. It is very wearable for sand and mud dredging. The marine dredge pump is made of high chrome alloy. In accordance with clients' requirements, the dredge pump can be connected to diesel engine through connecting gearbox.
Design Features:
Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving
Large dredging depth, high density of dredging mud, good NPSH and strong suction lift ability
Strong through-put. The pump can persistently discharge gravel, high plastic soil lump,etc.
The dredge pump can be directly matched with either motor or diesel engine
Long operating life of parts
Little hydraulic loss, high efficiency and low oil-consumption
Large volume, Heavy duty
Steady operating, little vibration, low noise
Simple & reliable construction, easily disassembly & assembly, convenient maintenance
Reliable sealing without leakage
Tobee WN800 Diesel Engine Dredge Pump is horizontal, single-stage cantilevered structure pump, which is designed to meet the requirement of the contractor demanding and comprehensive dredging requirement. WN800 dredging pump impeller passage is very wide to continuous pumping gravel or high plastic clay and not happens jam. The minimal amount of wear parts design in the dredging pump results in reduced wear, long life and lower maintenance which translates into less downtime, significant cost savings and dredging good performance with high efficiency.
Design Features:
Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving .
Large dredging depth, high density of dredging mud, good NPSH and strong suction lift ability.
Strong through-put. The pump can persistently discharge gravel, high plastic soil lump,etc.
The dredge pump can be directly matched with either motor or diesel engine.
Wide application. It can be used in various kinds of soil quality. Generally, the dredge pump is matched with an impeller with 3 or 5 pieces of vane.
Tobee WN700 CSD Dredge Pump is a kindly of special pump used for cutter suction dredger, hopper suction dredger or offshore dredging platform etc. It is double casings, single stage cantilevered centrifugal dredge pump structure. WN700 dredge pump is equipped with frame and lubrication is force thin oil. The design of double casing the pump working till the volute liner almost worn down and guarantee no leakage when volute liner is worn down.
Design Features:
WN700 dredge pumps are of single stage, single suction, horizontal structure. According to discharging pressure, The WN700 dredge pump is double casing pump.
Double casing design enhances the safety reliability. If volute liner is getting close to being worn out, or split, there will be no water leakage inside pump house. The WN700 dredge pumps can be work under water. The submerging depth can meet different requirements. Bearings use famous domestic or foreign brands. WN700 dredge pump has long trouble free working time.
WN700 dredge pump uses front dismantling structure, and is easy to stall, disassemble and repair. Different components have special dismantling tools.
Tobee WN600 Suction Dredge Pump is a new type dredging pump, aiming to China's river, lake and sea situation, they haven't been repaired for many years and now they are in great need to dredge and fill hydraulically. The dredging pump has characteristic features: easy installation, long-life service, high efficiency, reliable bearing lining and good economical efficiency etc. This type of pump can meet dredger's requirements completely and each set of dredging pump has passed the inspection issued by ISO.
Design Features:
The whole construction is suitable for dredgers.
Reliable and simple structure.
Easy Disassembly and Installation, Convenient Maintenance.
Good NPSH performance.
Excellent Ant-wear Performance, Long Service of Wet Parts.
A little Hydraulic Loss, High Efficiency, Low Consumption.
Reliable shaft sealing without leakage.
WN600 dredge pump has wide flow channel, which is designed for high density and lower abrasive slurry.
Tobee WN500 Gold Dredge Pump is designed for continuously handling the most difficult higher abrasive slurries & sands which contain too big solids, It has advantages of single case, wide channel, high chrome wetted parts. The discharge can be installed in 360 degree in any direction, easy to install and use, good cavitation performance, anti-abrasion etc. WN500 gold dredge pump mainly used for dredging, explosive sludge, dredger, sewage, mineral processing and metal smelting slag etc.
WN 500 Gold Dredge Pump Applications:
Construction:
preparation, pumping and recycling of bentonite
transportation of mud, sand, and gravel
pumping in depth and special foundations
moving slurries in civil works
emptying sludge for tunnel construction
Tobee WN450 Sand Dredge Pump is singe stage single suction horizontal cantilevered centrifugal dredging pump. Tobee designs and researches this new type dredging pump by making full use of advanced CAD software, aiming to dredging river, lake and seal which is in great need to dredge in the world. The use of this dredge pump has remarkable comprehensive economic benefits and can meet dredging ship's requirements completely.
Design Features:
Structure suitable for dredgers:
The structure of WN450 type dredge pumps are single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
Tobee WN300 Dredge Booster Pump is a kind of highly effective wear-resistant marine dredging pump, The wetted parts like Impeller, volute liner, front liner and black liner is made of high chrome alloy. WN300 dredge pump is mainly used in dredgers for dredging river, dredging sands, Blowing sand reclamation, Dredging port, cleaning lake and sea etc.
Design Features:
WN300 Dredge Booster Pumps are the heart to the dredgers according to its capacity, working efficiency, transferring distance, suction depth. DOD Dredge Pump are designed with features of resistance to wear and malfunction, and general robust and reliable character, which are highly successful proven in abrasive sand dredging industry.
Dredge Booster Pump offer a complete range of single-or double-walled, inboard or submerged, which are available for different uses. They can be used in inboard or submerged by single and double walled types.
Tobee WNQ Submerged Dredge Pumps are also known as onboard dredge pumps, It can either be installed onboard of the dredging vessels or in the suction pipe or cutter ladder as submerged pump. Onboard dredge pumps are the primary power source for transporting the mixture to the hopper or discharge location. The dredge pumps are also essential for mixture transport in stationary dredgers and at pipeline booster stations. The WNQ series dredge pumps are single-walled conventional and high performance types, complete with drive, support and control systems. They can respond to a wide range of operational requirements. Each offers benefits according to dredging materials, circumstances, and weight and space limitations.
Design Features:
Heavy Duty - a double-walled pump construction fully equipped with interchangeable wear parts. Excellent configuration for the most demanding operations.
Performance - a single-walled construction furnished with, where possible, replaceable wear parts. An all purpose dredge pump and balanced option as regards weight, size and replaceable wear parts.
Easy - for operations that are less demanding. This is a single-walled construction without any replaceable wear parts - a pump construction with as few components as possible.
Tobee AF Vertical Froth Slurry Pumps are latest generation of froth pump based on advanced technology at home and abroad. It is vertical shaft configuration, and comprise a hopper, with vertical bearing assembly. AF froth slurry pump is designed for transporting high abrasive and corrosive froth slurries, Especially used in the flotation process.
Design Features:
Excellent performance, easy assembly & disassembly, high reliability etc.
Dont need shaft sealing and sealing water.
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Tobee 8SV-AF Vertical Froth Pump is latest generation of froth pump based on advanced technology at home and abroad. It is vertical shaft configuration, and comprise a hopper, with vertical bearing assembly. 8 inch froth slurry pump is designed for transporting high abrasive and corrosive froth slurries, Especially used in the flotation process.
Design Features:
Vertical froth pump is suitable for transporting slurry with froth, especially for flotation processing .
It can eliminate the froth or foam in the running slurry and work normally even if the feeding slurry is not enough.
The froth pump wet parts are made of Ni-hard and high chromium wear-resistant alloy materials.
Funnel charging box is of steel structure.
The discharge direction of froth pump can be oriented at intervals of 45°.
The vertical froth pump adopts double-casing structure, with stable performance, high efficiency, wear resistance, and great interchangeability of components.
Tobee 6SV-AF Froth Slurry Pump has been designed to increase the pump ability of frothy slurry. The principle of operation is similar to that of hydrocyclone separation. Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pumps conical sump. This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by air locking.
Design Features:
AF rubber lined and hard metal vertical froth pumps were designed as one integrated unit for flexible layout and simple installation.
The pump, pump sump and driver are integrated in one self contained unit.
Simple to install and connect.
No alignment or special foundations needed.
The design ensures minimum maintenance and eliminates any requirement for water flushing.
Impeller clearance is maintained by external axial adjustment of the shaft/bearing assembly.
Tobee 3QV-AF Vertical Froth Pump is designed to increase the pump ability of frothy slurries. The principle of operation is similar to that of hydrocyclone separation. Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump's conical sump. This results in more efficient pumping at higher capacities and a smooth operation. It is ideal product for the transporting of slurries with lots of froth, especially the slurries in the minerals flotation processing.
Design Features:
Submerged in liquid, delivering abrasive & corrosive slurry which contains froth.
Double casing structure
No shaft seal and flushing water
The parts immersed in liquid can be wear resistant metal or rubber
Easy to maintain
Tobee 2QV-AF Froth Slurry Pump is vertical, double casing, single stage centrifugal forth pump, manufactured with advanced technology. The 2QV-AF froth pump can effectively eliminate the bubble in the slurry at work, even the slurry capacity is not enough the pump can work normally. It is suitable for various of flotation process and a perfect pump for handing frothy pulp indeed. AF vertical forth pumps capacity is much higher than that of other types slurry pump without shaft seal and sealing water.
Design Features:
Excellent performance, easy assembly & disassembly, high reliability and etc.
Without shaft seal and sealing water.
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to Any eight positions to suit installations and applications.
Tobee AFR Rubber Lined Vertical Froth Pumps are designed to increase the pumpability of corrosive frothy suspensions. The principle of operation is similar to that of hydro- cyclone separation. Air is separated from the corrosive slurry in a vortex created by the impeller rotation and the tangential inlet to the pumps conical sump. This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by air locking.
Design Features:
Integrated unit for layout flexibility.
Smooth operation of the open vortex created in the sump and vertical wet end inlet prevents air locking.
Cantilever design does not require submerged bearings or shaft seals.
Bearing assembly with double protection sealing arrangement to prevent ingress of slurry.
Wear parts are available in a variety of different materials.
Simplified maintenance.
Tobee Hydroman TJQ Submersible Slurry Pumps are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps in the Industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors. TJQ Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman offers the highest head submersible, largest capacity, heavy duty slurry pumps available on the market.
Design Features:
HIGH-EFFICIENCY HIGH CHROME REVERSIBLE AGITATOR
Doubles the life of the agitator. The excavating action is created by the hardened high chrome agitator blades. They create a current that lifts settled sediments conveying them to the suction of the impeller which delivers a continuous flow of solids to the pump discharge.
LOW OPERATING RPM
Low operating RPM promotes low wear rates and extended component life. When compared to other pumps of similar capacity Hydroman has a lower operating speed.
Tobee Hydroman Submersible Sand Pumps are a worlds standard submersible agitator pump, Capable of transporting up to 70% solids, this pump is born to dredge and has earned itself a solids-handling reputation for reliability and durability in the worlds toughest applications, The wear parts are made from high chrome alloy, It is widely used in pumping sand, sludge, ore slurry, coal slurry, sand-stones containing big solid particles etc.
Design Features:
The whole machine is dry submersible pump and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so high pressure water and impurities are effectively prevented from entering inner cavity of the motor.
Besides the main impeller,there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out.
Tobee Hydroman THY Hydraulic Submersible Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The THY hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Design Features:
Submersible heavy duty agitator pump, hydraulic driven with variable RPM
All Pumps have standard high efficiency agitator to lift settled solids.
High abrasion resistance with high chrome wear parts.
Low rotation speed to reduce wear effect.
Agitators, Cutters, Excavators are available for options
Able to handle up to 70% solids by weight.
Easy installation on the boom of hydraulic excavators.
Tobee Hydroman TQSY Hydraulic Submersible Dredge Pumps are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Design Features:
The bottom of the dredge pump has a mixing device, and it also could be equipped with bilateral or multilateral agitators additionally in order to prevent large pieces of fixed material clogging the dredge pump and fully making the solid and liquid mixed, thus it is more convenient to handle.
Tobee THY300-THY400 Hydraulic Sludge Pumps are a new dredging equipment. It is mainly used as an excavator attachment taking place of grab bucket when there is too much water, mud and not suitable for digging. It is driven by the excavator hydraulic system or a separate hydraulic station to pump sand, sludge, slurry, mortar etc. Its wear parts are made of high-strength and wear-resistant chrome alloy. Hydroman hydraulic sludge pump is mostly attached to amphibious excavator, swamp excavator, dredging excavators, or cutter suction dredger, bucket dredgers for dredging operation.
Design Features:
High performance in heavy duty conditions hydraulic sludge pumps ensure transportation up to 35% of dry mass (sand, gravel etc.) from total pump capacity.
Oversized motors are designed for sludge and slurries with solid concentration up to 70% by weight and 1.6 Kg/dm3. The hydraulic drive version is also available to provide higher performance in especially harsh working conditions.
Tobee Hydroman THY175-THY220 Hydraulic Dredge Pumps are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge, mud, sand and slurry. Remove the bucket and connect to the hydraulic dredge pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The Hydroman hydraulic dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can be supplied to various dredging conditions.
Design Features:
The hydraulic dredge pump bottom is arranged with the mixing device, and the bilateral and multilateral separate mixer can be arranged, which can prevent pump blockage by the bulky fixed substance, so as to fully mix the solid with liquid, and facilitate handling.
The hydraulic dredge pump can handle the solid substance with the maximum particle size of 150mm, and the solid-liquid extraction concentration can be over 70%.
Tobee Hydroman THY24 - THY85 Heavy Duty Hydraulic Slurry Pumps are designed for the pump that are driven by hydraulic motors, which are available by eliminating haul trucks, conveyor belts and other mechanical earth moving equipment. Hydraulic submersible slurry pumps are capable of dredging sand from the river and/or sea in high density and specific gravity by using the optional water jets and cutter heads. Dredging is an activity that dredge sand and gravel underwater in shallow seas or rivers, and so the project of dredging system will consist of dredging slurry pump, pipe, diesel motor or electric engine, and various accessories, in order to excavate and remove material from the bottom of water.
Design Features:
Wear parts are all constructed with abrasion resistant chromium alloy.
Unique mechanical seal device can prevent the electric motor from high pressure water and impurity.
Easy installation, operation and cost saving, No need additional vacuum pump.
In addition to the main impeller, a pair of agitation impeller is equipped to help break and mix the sludge.
Professional technology support is provided during the whole process of the usage and maintenance.
handle up to 70% per weight material density.
Tobee Hydroman 400TJQ Electric Submersible Slurry Pump adopts excellent material, advanced structure, and it is with wide flowing passage of strong delivery ability. The wear parts are wear-resistant chrome alloy. They are mainly used for transporting liquid with solid particles, like sand, cider coal, mud etc. It is widely used in metallurgy, in, steel industry, building, power station and other industries.
Design Features:
Better stability & longer service life - wear parts are all constructed with abrasion resistant chromium alloy.
Unique mechanical seal device can prevent the electric motor from high pressure water and impurities, thus high suction efficiency can be ensured.
Agitation impeller is equipped to help break and mix the sludge.
Easy installation, operation and cost saving, since no additional vacuum pump or pump house is needed.
Professional technology support is provided during the whole process of the usage and maintenance.
Specifications:
Size: 8" x 6"
Capacity: 360-828m3/h
Head: 10-61m
Speed: 500-1140rpm
NPSHr: 2-9m
Eff.: 72%
Power: Max.120kw
Handling solids: 63mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Design Features:
Bearing assembly - large diameter shaft with short overhang contributes to long bearing life.
Liners - easily replaceable liners are bolted, not glued to the casing for positive maintenance.
Casing - Casing halves of cast or ductile iron provide high operating pressure capabilities.
Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal.
Tobee 100RV SPR Rubber Lined Vertical Circulation Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump.
Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR, 150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR
Wet End parts:
Pump Impeller: SPR40206, SPR65206,SPR10206, SPR15206, SPR20206, SPR25206, SPR30206
Pump Casing: SPR40092, SPR65092, SPR10092, SPR15092, SPR20092, SPR25092, SPR30092
Pump Back Liner: SPR40041, SPR65041, SPR10041, SPR15041, SPR20041, SPR25041, SPR30041
Impeller O-ring: RV064-S10, Discharge Pipe Gasket: SP10204, Rubber Back Liner Seal: E4124S01
RV004-1
100RV-SP Rubber Lined Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.
10x8S-G Gravel Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels.
10x8S-G Gravel Pump Wear Parts Design:
Impeller: Front and back shroud expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimizing suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
Casing: Robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design.
Expeller (Centrifugal Seal): no external sealing water required where applicable.
Stuffing Box: flushed gland sealing with braided packing and a lantern ring.
Bearing Assembly: Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Tobee is committed to improvement of slurry pump spares continues with the introduction of the Hyperchrome alloy material. Slurry pump spares have direct connection with slurry, are very crucial to the service life of slurry pumps. The slurry pump spare parts include slurry pump impeller, slurry pump liners, slurry pump throatbush, slurry pump frame plate liner insert, slurry pump casing, slurry pump shaft, slurry pump shaft sleeves, slurry pump bearing assembly etc, They are very easily worn-out components because the slurry pump spares work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of slurry pump spares, the material plays an important role here.
Slurry Pump Bearing Housing is one most important part of bearing assembly for slurry pumps, It contains shaft and bearings, There are four clamp bolts through the base which fasten the slurry pump bearing housing.
Tobee�® Slurry Pump Bearing Housing Specifications:
Part No.: 004
Materials: Hard Iron, OEM
Models: AH, HH, L, M, G, GH, etc
Tobee Slurry Pump Bearing Housing description:
Bearing Housing with Shaft for Bearing Assembly of Heavy Duty Slurry Pumps. Introduction: Bearing assembly is an assembled part which comprises parts like shaft, bearing housing, bearings, end cover, labyrinth, etc. and is the rotor part of a slurry pump.Heavy duty roller bearings are housed in a removeable bearing cartridge. Cartridge type with grease lubricated roller bearings designed for more than 60 000 operating hours.
Slurry pump shaft, slurry pump bearing housing, slurry pump bearings, slurry pump end cover, and slurry pump labyrinth, etc.assembled a slurry pump bearing assembly, and is the rotor parts of slurry pump. The bearings installed are branded, ZWZ, HRB, SKF, TIMKEN.
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 6/4 AHR Slurry Pumps can make the inlet to 5 inch with an adaptor, that's 5/4 AHR slurry pump with polyurethane lined parts, The main purpose of the 6/4 AHR slurry pump is to move these sands from one place to another without damaging the pump or the surrounding environment.
6/4 Polyurethane Slurry Pumps are directly connection with slurries, It is very crucial to the service life of slurry pumps. The worklife of Polyurethane parts is longer than Rubber materials for 3~5 times, Polyurethane wetted parts include Impeller, Throatbush, Frame plate liner, Cover plate liner, Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here.
Electrically Powered Slurry Pump Solution to Transfer Sand are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors.Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman�® offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
Tobee 18x16TU-GH High Head Gravel Pump is horizontal single-casing gravel pump with wide channel to transfer sands,slurries or gravels with big particle size. The wet parts are made of Ni-hard and high-Chrome alloys to ensure long service life. It has superior performance than common pumps in dredging, sand mining, barge loading and mineral processing etc. With all the advantages of TG Gravel pump,TGH gravel pump has achieved extra high head for special working conditions.
3/2C-AH Slurry Pump is a heavy-duty slurry pump that designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry pumps offer unmatched power consumption, long component life, and unmatched reliability.
Tobee�® 3/2 C AH Slurry Pumps Performance Parameters:
Size: 3" x 2"
Capacity: 39.6-86.4m3/h
Head: 12-64m
Speed: 1300-2700rpm
NPSHr: 4-6m
Eff.: 55%
Power: Max.30kw
Handling solids: 25mm
Seal arrangement: Packing seal, Expeller seal, Mechanical seal
Tobee 6/4D-G Single Casing Sand Gravel Mining Pump with high chrome material and packing seal arrangement that used in river sand.
6x4D-G Gravel Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
TU18110TL1 Volute Liner for 20x18TU-AH
65QV-SP Vertical Slurry Sewage Pump for Mining and Aggregate Slurries, it is also is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance.
65 QV-SP Vertical Slurry Sewage Pump is a cantilever sump pump,Which work submerged to transport high abrasive and high density slurries with large particles.It doesn't need any seal water. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design.and suction agitator is also available.
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of the MAGNUM I pumps.
Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6Ã??5Ã??11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Tobee Slurry Pump Rubber Cover Plate Liner F8018R55 is the main wear parts for the 10x8 AH Rubber Lined Slurry Pumps, and it deals with the corrosive slurry with blunt particles.
As one of main wetted parts, Cover plate liner is very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber and metal materials selection for most all duties in mill.
Tobee offers a wide variety of natural rubber and synthetic rubber for the majority of slurry pump parts in both horizontal slurry pumps and vertical slurry pumps. A sample of our elastomer options: Natural Rubber, Neoprene, Hypalon, EPDM, Nitrile, Butyl, Polyurethane etc.
can offer replacement KSB slurry pump impellers, the KWPK 65-315 impeller used on KSB KWP Non-clogging Centrifugal Pump, it is a closed non-blocking multi-vane impeller impeller.
pumps are Horizontal, single-stage, radially split volute casing types with heavy-duty back pull-out, non clogging impeller design for industrial applications, they have either multi-vane impeller (K), free-flow impeller (F) or open multi-vane impeller (O), the pumps are not self-priming.
K type impeller - Closed non-blocking impeller. It is suitable for transporting clean water, sewage, and solids-containing media. The medium should not contain solids that are particularly easy to adhere and easy to entangle (such as extra long fibers or coarse rubber particles).
High chrome pump casing spare parts for tunnels pumps.
The OEM Slurry pump parts from are better than others on the market, because we are a professional slurry pump spares manufacturer, we know the exacting tolerances and engineering standards required to build and the maintain these pumps, and the slurry pump replacement spares we supply are identical to the parts of our slurry pumps.
foundry is a vertically integrated facility, with design, pattern prep, molding, casting, heat treating, machining and assembly. We can assure the customer of precise fit when the parts are installed in existing OEM frames and will operate mechanically and hydraulically as designed by the OEM.
Sandman manufactures the Mission Magnum XP series Large Blender Pump from 8x6-18, 12x10-23, 14x12-22, the 14x12x22 XP Centrifugal Pumps are used for oil and gas fracking operation.
Mission Magnum XP Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume mobile and stationary applications where a small footprint is critical. High chrome alloy or hard iron material options for different applications.
Design Features:
Full-open wide impeller.
Long life no adjustment mechanical seal available for near zero leakage.
Thick, concentric casing with replaceable casing wear pad.
Hard iron and high chrome alloy material optional.
Large power to ensure large flow rates and head pressure up to 500ft.
Small footprint design is versatile for mobile and stationary application.
Working for fracking industrial standard and blending application.
Each casing is approved pressure test prior to delivery.
Heat treatment was done to improve the hardness and wear-resistance to ensure a longer working life.
Shaft sleeves are made by 416SS and ceramic coating to protect shaft from abrasive fluids for extra life.
Mechanical seals can be Tungsten-Tungsten, Tungsten-Silicone, or Silicone-Carbide, all with highly polish sealing face and piton bellow and stainless steel springs.
100% compatible with NOV Mission Magnum XP, MCM XL series and current market offerings.
The pumps can be unitized with Ex-proof electric motors, diesel engines in-line or over-belt driven configuration.
Diesel Engine Gravel Sand Pump is designed specifically for the continuous pumping of extremely aggressive slurries, with a wide particle size distribution. It is can be used for handling large particles at consistently high efficiencies results in low cost of ownership.Tobee only uses the best materials for our pumps' components (casing, impeller, wear plates etc.).
Tobee Gravel Sand Pump is single-stage single-casing horizontal dredging pump driven by diesel engine through a gearbox, The materials of gravel pump wear parts are made from high chrome alloy with hardness is no less than 60HRC, adopting grease lubrication for bearings to ensure stable running on the strong frame, It is widely used in the river platform, barges, marine ship or dredger for pumping sands, gravels, slurries, muds, sludges, stones or other big particle solids etc.
High Chrome Impeller GGH10137A05 of 3 Vane Closed Type which one of wet-end parts for 12/10G-GH Gravel Sand Pumps.
Tobee's G/GH Gravel Pump Impeller is to impart and direct the centrifugal force to the sand gravel slurries. And Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
Compared to slurry pump impeller, gravel pump impeller has larger internal profile that allows bigger particles and handling the most difficult higher abrasive slurries.
12x10G-GH High Head Gravel Pump is the world's standard pump for dredge and gravel with high pressure applications. The 12x10 pump performance range provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications.
Fan Pump also called low pulse paper pulp pump, It is a new pump type for paper making industry with advatages of high efficiency, low pulse and high dependability. It is used for transporting the paper pulp concentration 1 in medium-high speed paper making machine for supplying pulp system.
Paper Pump Specification:
Size: 150-500mm
Capacity: 160-2000m3/h
Head: 14-40m
Concentration: 1%
Temperature: 80
Materials: Cast iron, SS304, SS316L, Duplex stainless steel etc
Paper Pump Design Features:
1. Double Suction, high efficiency, low pulse closed Impeller design.
2. Split Case Structure, easy to install and maintain.
3. Especially for the supplying paper pulp system of medium-high speed paper making machine
4. Oil Lubrucation,running stable,long service life.
5. Packing seal and mechnical seal for options
6. High abrasive and corrosive materials are available for various paper pulp.
Andritz Paper Pump Specification:
Size: 1 16 Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: 120
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
Andritz Paper Pump Design Features:
Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
Shaft seal - Mechanical seals and packing seal can be used as per requested
Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Pos.212 Shaft suitable for Andritz ACP300-700 Single-stage Centrifugal Pump with spline slotting.
Pump is always making continuous optimization of materials like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, Viton, Fluoroplastic, Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive & corrosive materials for various applications.
Such as impeller: EN-GJL 250, 1.4460 and 1.4517, casing/casing cover: EN-GJL 250 and 1.4460, volute casing: EN-GJL 250, EN-GJS-400-15 and 1.4460, bearing housing EN-GJL 250 and 1.4468, front and rear lining: 1.4460 and 1.4517, stuffing box body EN-GJL 250, 1.4460 and 1.4408, shaft: 1.4021 & 1.4462 and 1.4404 & 1.4439, etc.
ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
ANDRITZ FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m�³/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
S Series Pumps and Pump Spares are widely used in papermaking, pulp mills, pulp medium of transportation, also applies to enterprise sugar, starchprocessing, chemical raw materials, such as the transmission medium.
S Paper Stock Pulp Pump SPECIFICATIONS:
Size: 1-16 Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: 120
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for S series paper-pulp pumps.
Hydroman Submersible Centrifugal Dredging Mud Suction Slurry Pump Description:
Hydroman Submersible Centrifugal Dredging Mud Suction Slurry Pump can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump. These are activated should the stator temperature exceed 157 degrees C. The water leakage probe is mounted inside of the oil chamber for the submersible slurry pumps. Should the oil water ratio reach a pre-determined ratio a warning signal will be activated, and the pump switched off.(The oil in the chamber should be replaced at regular service intervals.)
Tobee Wear Parts Impeller SPR10206 of 100mm SPR Vertical Sump Pumps are made of Ethylene Propylene Diene Monomer (EPDM) material which replace original 100RV-SPR Vertical Pump Parts on site.
Tobee Vertical slurry pump named vertical spindle pump, Vertical sump pump, vertical cantilever pump. vertical submerged pump. Vertical sewage pump, Column pump as well.
Impeller SP10206 - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Casing SP10092 - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Back Liner SP10041 - It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardard pump back liners with high chrome, natural rubber, polyurethane for different working condition.
100RV-SPR Rubber Vertical Slurry Pump Parts including No.: SPR10206AR55, SPR10092R55, SPR10041R55, etc.
Metal Model: 40PV-SP, 65QV-SP, 100RV-SP, 150SV-SP, 200SV-SP, 250TV-SP, 300TV-SP
Submerged depth: E 900mm, G 1200mm, J 1500mm, L 1800m, M 2000m, Q 2400mm
Wet End parts:
Pump Impeller: SP40206A05, SP65206A05, SP10206A05, SP15206A05, SP20206A05, SP25206A05, SP30206A05
Pump Casing: SP40092A05, SP65092A05, SP10092A05, SP15092A05, SP20092A05, SP25092A05, SP30092A05
Pump Back Liner: SP40041A05, SP65041A05, SP10041A05, SP15041A05, SP20041A05, SP25041A05, SP30041A05
Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR, 150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR
Wet End parts:
Pump Impeller: SPR40206, SPR65206,SPR10206, SPR15206, SPR20206, SPR25206, SPR30206
Pump Casing: SPR40092, SPR65092, SPR10092, SPR15092, SPR20092, SPR25092, SPR30092
Pump Back Liner: SPR40041, SPR65041, SPR10041, SPR15041, SPR20041, SPR25041, SPR30041
Impeller O-ring: RV064-S10, Discharge Pipe Gasket: SP10204, Rubber Back Liner Seal: E4124S01
RV004-1
100RV-SP Rubber Lined Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.
Tobee 100RV-SPR vertical slurry pumps and slurry pump spares to South Africa.
The SP/SPR Vertical cantilever Sump pumps is a vertical spindle slurry pump. It is designed to transport corrosive, coarse particles, and highly concentrated slurry. It can operate normally without a shaft gland or shaft gland water, and the length of the shaft can be customized to the depth of the liquid level.
The SP/SPR vertical slurry pump is a vertical type slurry pump. The inlet is oriented vertically and downward on one side of the vertical pump, and the outlet is oriented vertically and upward on the other side. It composed of the lower filter platform, pump body, impeller, shaft, guard plate, and bracket. The upper part of the SP/SPR pump is supported by bearings; the pump is installed under the liquid, and no shaft seal is used. It uses a belt drive (BD) and direct drive (CD) transmission type. The depth of the immersion liquid in the standard size range can be adjusted according to the needs of the user.
Vertical Pumps Design features:
1. Vertical sump pumps are vertical, centrifugal slurry pumps submerged in sump to work.
2. They are designed for delivering abrasive, large particle and high density slurries.
3. These pumps have no need of any shaft seal and sealing water.
4. They can also be operated normally for insufficient suction duties.
5. Wet parts of type SP metal vertical slurry pump are made of abrasion-resistant metal.
6. All parts of type SP(R) rubber lined vertical slurry pump immersed in liquid are lined with rubber outer liner. They are suited
7. To transport non-edge angle abrasive slurry.
16x14TU-GH High Head Gravel Pump are Capable of handling large particles at consistently high head, high pressure, long distance, resulting in lower costs. Casing is designed with a large volume internal profile to reduce associated velocities which prolong component life. Designed to pump extremely aggressive gravels with a wide particle distribution. The GH gravel pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications.
Sandman 20612-02-33 H20612-02-33 Shaft can be used for Mission Magnum 6x5x14 Pump and Mission 2500 Supreme 6x5x14 Pump.
Mission I Pump Parts
The Magnum is available in Magnachromeâ?¢, hard iron, stainless steel, and aluminum bronze fluid ends.
2500 Supreme Pump Parts
The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze wearing spare parts.
Sandmasater Pump Parts
The Sandmaster centrifugal pumps contain almost all the features and designs of MAGNUM I for hydraulic motor drives.
Magnum XP Pump Parts
The Magnum XP pump parts are available in high chrome alloy or hard iron material options for different applications.
Tobee E044 Split Packing Gland Assembly is used for 6x4 EAH slurry pump, 8x6 EAH slurry pump and 10x8 EM slurry pump.
Slurry Pump Gland Assembly is primarily used to compress the packing to ensure a tight seal between the packing and the bushing. Gland Assembly has a split Gland Assembly that is typically used in slurry pumps.
The stuffing box seal is composed of packing box body, packing, gland, bolt and other basic parts. The packing placed between the box body and the rotating shaft is radially extended under the axial force of the bolt force and the gland, so that the packing is tight. Adhered to the periphery of the rotating shaft, the lubricating oil added from the oil cup will form a very thin oil film between the packing and the contact surface of the rotating shaft when the shaft rotates, which not only has lubricating effect, but also prevents the medium in the kettle from escaping and Infiltration of gas outside the kettle.
The gland is also available with a pair of open gland assembly used for slurry pumps. The slurry pump gland assembly is prone to damage due to stress during packing replacement and adjustment. Previously, usually with wire binding or replacement of gland assembly of slurry pump, often cause the media to continue to leak, both a waste of material, and unsafe. The packing gland has the characteristics of simple structure, easy to use, safe and reliable, and strong emergency. When the gland assembly is damaged, it can be easily and quickly replaced without affecting the normal use of the centrifugal slurry pumps.
Hydroman Offloading Submersible Dredge Pump Description:
Hydroman Offloading Submersible Dredge Pump is also called Submersible agitator dredge pumps, it is a single suction submersible sand pump that allows solid to be drawn. Submersible dredge pump is the kind of heavy duty submersible mud pump that is applied for the dredging process to transport underwater sand, slurry, sludge, gravel or other sediments to specified place.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Ductile iron fully lined casing provides durability, strength, safety, and long service life.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs.
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.
Designed for rugged duties while offering excellent efficiencies.
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.
Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Mechanical seals reduce flush water usage, minimizing pump operating costs.
Back Liner SPR65041 is one of rubber wetted parts for Rubber Lined 65QV-SPR Vertical Slurry Pump.
The rubber wet parts of vertical slurry pump are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert.
Tobee Slurry Pump Parts Piston Ring basic part number is 108, Its function is to form a maze together with labyrinth to keep contaminants out of the bearings. Slurry Pump piston ring is called Labyrinth ring as well. D108 is used on 4/3D-AH, 4/3D-AHR, 6/4D-AH, 6/4D-AHR, 6/4D-G, 3/2D-HH Slurry pumps
Slurry pump piston rings are normally made in gray iron material, ductile iron is also available. G01, G02.
Slurry Pump Piston Ring Codes: B108, C108, D108, E108, F108, X108, R108, S108,etc.
Andritz ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%.ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
Tobee ACP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Andritz ACP Paper Pump Performance Parameters:
Size: 1"-16" Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: 120
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
Tobee Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
Tobee FP Series Pumps and Pump Spares are widely used in papermaking, pulp mills, pulp medium of transportation, also applies to enterprise sugar, starchprocessing, chemical raw materials, such as the transmission medium.
ANDRITZ FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m3/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
Tobee 6x4D-AH Slurry Pump
SPECIFICATIONS:
Size: 6" x 4"
Capacity: 162-360m3/h
Head: 12-56m
Speed: 800-1550rpm
NPSHr: 5-8m
Eff.: 65%
Power: Max.60kw
Handling solids: 44mm
Seal arrangement: Packing seal, Expeller seal, Mechanical seal
6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6x4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids.
Design Features:
Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely.
Interchangeable anti-abrasive wet parts made of high-chrome alloys.
The discharge branch can be oriented to any eight positions at the interval of 45 degrees.
Various drive types: DC (direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control etc.
The shaft seal uses the packing seal, expeller seal and mechanical seal.
TL45018R55 Cover Plate Liner is one of the rubber wear parts for 450ST-L Rubber Lined Slurry Pumps.
Tobee�® R55 Cover Plate Liner TL45018 is the main wear parts suit for 450ST-L Rubber Lined Slurry Pump, and it is very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber and metal materials selection for most all duties in mill.
Our Slurry Pump Cover Plate Liners are normally made in premium natural rubber R55 that offers 1.5 times service life of normal liner rubber R26. They work under longtime impact of abrasive and corrosive slurries in the high speed. And it used for for Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailing, Aggregate Processing, Ash Handling.
Tobee offers a wide variety of natural rubber and synthetic rubber for the majority of slurry pump parts in both horizontal slurry pumps and vertical slurry pumps. A sample of our elastomer options: Natural Rubber, Neoprene, Hypalon, EPDM, Nitrile, Butyl, Polyurethane etc.
AISI 4140 Shaft 20612-02-33 can be used for Mission Magnum I Centrifugal Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14 Sand Pumps.
offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6511 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Tobee Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
Tobee manufactures Andritz alternative ACP, S, VP, FP, CP series Paper & Pulp Stock Pumps and Pumps Wearing Spares, all the pumps and spares parts are widely for Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.
Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Andritz S Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc
Equivalent Andritz S100-265 Process Pumps and Paper Pulp Centrifugal Pumps are widely used for handling pulp and paper stock transfer.
Tobee Andman Paper Pulp Pumps SPECIFICATIONS:
Size: 1"-16" Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: â?¤120â??
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
Design Features:
â?¢ Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
â?¢ Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
â?¢ Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
â?¢ Shaft seal - Mechanical seals and packing seal can be used as per requested
â?¢ Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Andritz S Series Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, S600-700 etc.
Tobee Andman Paper Pulp Pumps SPECIFICATIONS:
Size: 1"-16" Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: 120
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
Design Features:
Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
Shaft seal - Mechanical seals and packing seal can be used as per requested
Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Andritz S Series Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, S600-700 etc.
Andritz ACP Series Pump Models and Spares:
ACP65-315, ACP100-500, ACP65-250, ACP100-315, ACP125-400, ACP150-500, ACP100-250, ACP125-315, ACP150-400, ACP200-500, ACP300-700, ACP125-250 etc.
Tobee Andritz Pump Spare Parts namely the pump parts have direct connection with slurry, are very crucial to the service life of slurry pumps. The wet parts, include impeller, liner, throatbush, frame plate liner insert, casing, etc., are very easily worn-out components because they work under longtime impact of abrassive and corrosive slurries in the high speed. For the long service life of pump parts, the material plays an important role.
Tobee�® mainly manufacture Andritz Paper Pulp Pumps and Spares Parts, such as Andritz ACP, S, CP, VP, FP etc paper pulp pumps and Andritz Spares Parts.
Andritz replacement parts including: Open or Semi Impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), Pump casings, Casing cover, Front linings, Rear lininings, Stuffing box body, Shaft etc, The materials can be manufactured in cast iron, SS304L, SS316L, 1.4460 Duplex stainless steel, 1.4517, 1.4517 hardened etc.
ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
Sandman 8x6x11 Replacement NOV Mission Magnum Centrifugal Pumps with 11 inch impeller that widely used for provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer.
MISSION Magnum I pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. Standard models are equipped with a heavy-duty 2�½-in. alloy steel shaft protected from wear by a stainless-steel shaft sleeve, double-row outboard bearings, and inboard roller bearings. They are rated for continuous service in applications up to 200 hp and are available in hard iron, stainless steel, aluminum bronze, and high Chrome with capacities up to 3,400 gal/min and pressure head up to 550 ft. Some sizes can be offered in a counterclockwise rotation giving the user more flexibility.
Mission MAGNUM I Sand Pump
Tobee�® as a professional centrifugal pump manufacturer in China, with more than 34 years of experience in the manufacturing and service of Mission centrifugal pumps and parts. Our pumps are specifically designed to meet the needs of some of the oil and gas drilling, mining, fluid pumping, horizontal directional drilling and well stimulation fracking.
Tobee offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x5x11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Sandman Mission 2500 4x3x13 Pump Impeller H19206XX30 is same and match 250 series 3x4x13 Centrifugal Pump Impeller P25D343MRxxx
The 250 series Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 250 series is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration
Design Features
Versatile stuffing box
Thick strong concentric casing with replaceable casing wear pad
Casing gasket receded for protection
Replaceable stuffing box cover with dual stuffing box bolts
Longlife noadjustment mechanical seal available for near zero leakage
Replaceable shaft sleeve
Solid Frame base
Labyrinth seals for maximum bearing protection
Duplex angular contact bearings
Full pipe diameter entrance for minimum turbulence and maximum efficiency
Wide semiopen impeller creates lower axial thrust for improved bearing life
All sizes feature the same power end
Mission 2500 Supreme Pump Parts Seal, O.B. Brg Housing also called Outboard Bearing Housing Seal, P/N H7496-253 648402295.
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Tobee offers replacement MCM 250 series Centrifugal Pump 3x4x13 and Nov Mission 2500 Supreme Pump 4x3x13 Halco 2500 Supreme Pump 4x3x13
Mission 2500 Supreme Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 2500 Supreme is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration
Design Features
Versatile stuffing box
Thick strong concentric casing with replaceable casing wear pad
Casing provided with replaceable casing wear pad on 4x3x13 10x8x14 models
Replaceable stuffing box cover with dual stuffing box bolts
Longlife noadjustment mechanical seal available for near zero leakage
Replaceable shaft sleeve
Solid Frame base
Labyrinth seals for maximum bearing protection
Duplex angular contact bearings
Full pipe diameter entrance for minimum turbulence and maximum efficiency
Wide semiopen impeller creates lower axial thrust for improved bearing life
All sizes feature the same power end
40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available.
Tobe 250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Hydroman Hydraulic Submersible Pump for Sludge Dredging Application is extremly suitable for immersions depths of up to 80m and solids handling of 120mm in suspension, and Hydraulic Sand & Slurry Pump is a highly durable and reliable sand & slurry pump for dredging and transporting solids and a variety of other materials, so mainly used for dredging, excavating, and transporting materials such as rocks, gravel, and soils.
Hydroman Hydraulic Submersible Pumps for Sludge Dredging Application are also often used by construction companies who need to move large amounts of dirt or sand quickly, so hydraulic submersible excavator sand pump can continue building houses or other structures on-site without having to wait around all day long until someone else gets there with heavy equipment
As hydraulic submersible solids sand pump use energy from water pressure rather than from human power or diesel engines like in different machines. So submersible hydraulic dredging sand pump have a very high efficiency compared to other lifting-heavy materials such as cranes and backhoes.
Hydroman Hydraulic Submersible Slurry Pump is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities. In addition to the main impeller, there is also an agitating impeller for the submersible slurry pump, which can agitate the slag deposited on the bottom of the water. Plus, the mixing impeller and other main flow parts are made of advanced materials, which are wear-resistant, corrosion-resistant, non-clogging, strong in sewage, and can effectively pass larger solid particles.The slag suction efficiency is high, and the dredging is more thorough. The motor of submersible slurry pumps dives into the water, without the need to construct complex ground protection and fixing devices, and the management is easier, thus to ensure high and reliable performance.
150SV-SP Vertical Slurry Pump is available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in Minerals processing, Coal preparation, Chemical processing, Effluent handling, Sand and gravel and almost every other tank, pit or hole-in-the ground slurry handling situation.
Tobee E044 Split Packing Gland Assembly is used for 6x4 EAH slurry pump, 8x6 EAH slurry pump and 10x8 EM slurry pump.
Slurry Pump Gland Assembly is primarily used to compress the packing to ensure a tight seal between the packing and the bushing. Gland Assembly has a split Gland Assembly that is typically used in slurry pumps.
3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, the high head slurry pump lines can often satisfy application duties with a single pump where others require multiple pumps in series.
1.5/1B-AH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly.
Tobee�® AH Series Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling high abrasive, high density slurries.
Equivalent Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Paper Stock Pulp Pumps and Wearing Spares working advantages:
1. High efficiency and energy saving: The operating efficiency is 3-10 percentage points higher than that of ordinary pulp pumps on average, and the energy saving and consumption reduction reach 15-30%.
2. Good cavitation performance and long service life: the actual service life can be 2-3 times longer than that of ordinary pulp pumps;
3. High concentration and no clogging: the pulp concentration can reach 6%;
4. Reasonable structure and convenient maintenance: The pump head part adopts a front and rear door-opening structure. There is no need to disassemble the pipeline during maintenance. The pump can be disassembled and repaired by simply moving the motor backward.
18x16TU-GH High Head Gravel Pump is horizontal single-casing gravel pump with wide channel to transfer sands,slurries or gravels with big particle size. The wet parts are made of Ni-hard and high-Chrome alloys to ensure long service life. It has superior performance than common pumps in dredging, sand mining, barge loading and mineral processing etc. With all the advantages of TG Gravel pump,TGH gravel pump has achieved extra high head for special working conditions.
Tobee 10/8S-GH High Capacity Gravel Suction Pump with high chrome wear parts which design for handling large particles at river.
10x8S-GH High Head Gravel Pump is designed for continuously handling the most difficult high abrasive, big particle slurries with extra high head. The wet parts are made of high-Chrome alloys to ensure long service life. GH gravel pumps has far better performance than common gravel pumps in dredging, sand mining, barge loading and mineral processing etc.
Design Features:
GH high head gravel pump is cantilevered horizontal centrifugal pump designed for handling the most difficult higher abrasive slurries which contain too big solids to be pumps by a common slurry pump.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.
The discharge direction of pump can be oriented in any direction of 360 .
closed impeller with wide passage, good performance of NPSH and abrasion resistance.
All the wet parts are made of wear resistant high chrome alloy material. They are suitable for delivering slurry in mining, metal melting, dredging, barge loading.
TG14x12T Gravel pump is interchangeable with 14/12T-G Pump. It is designed specifically for the continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Its wear parts made from high chrome alloy, The hardness can upto HRC65, Capable of handling large particles at consistently high efficiencies resulting in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
14/12T-G Gravel Pump Design Features:
Bearing assembly - Large diameter shaft with short overhang contributes to long bearing life.
Liners - Easily replaceable liners are bolted, not glued to the casing for positive maintenance.
Casing - Casing halves of cast or ductile iron provide high operating pressure capabilities.
Impeller - Front and rear shrouds have pump-out vanes that reduce recirculation and seal contamination.
Throat bush - Wear is reduced and maintenance is simplified by the use of tapered.
Tobee Labyrinth T062DM-10-E62 is a component of drive end parts installed on slurry pump bearing assembly for 14/12ST-AH Slurry pumps, 14/12T-G Gravel Pumps. its purpose is to plug the hole in the bearing housing where the shaft passes through.
Slurry Pump Labyrinth Part Code: B062, C062, D062, DD062XL, E062, E062XL, EE062, EE062XL, F062, F062-10, G062-10, GAM062-10, FAM062, X062, R062-1, R062DM, S062, S062DM, T062, T062DM, PV062, QV062, RV062, SV062, etc.
Tobee can offer various materials as the client required, such as C23, D81, E62, G02, etc, for AH, HH, M, L, and G/GH pumps. And Slurry Pump Labyrinth are normally made in gray iron material, ductile iron is also available. And Tobee can offer various materials as the client required, such as C23, D81, E62, G02, etc.Except for the wetted parts, the pumps also are composed of many other wear parts, such as expeller, expeller ring, pump case, shaft sleeve, mechanical seal, shaft, bracket, bearing assembly etc. We supply all these spares 100% interchangeably with original and and we can guarantee the stability, substantial savings and a very competitive price. Tobee slurry pump parts are available in high chrome, gray iron & ductile iron, stainless steel, rubber and urethane material which are manufactured to maximize the abrasion and corrosion resistant. And we have stock for most of standard slurry pump spares which could deliver you within 7 days after your PO.
Tobee�® Slurry Pump Spare Parts Applications:
Heavy Mining | Mineral Processing | Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Washdown | Floor Drainage | Mixing
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances. Tobee offers ZWZ, SKF, TIMKEN, NSK, FAG, NTN brands for different options.
18x16TU-GH High Head Gravel Pump is horizontal single-casing gravel pump with wide channel to transfer sands,slurries or gravels with big particle size. The wet parts are made of Ni-hard and high-Chrome alloys to ensure long service life. It has superior performance than common pumps in dredging, sand mining, barge loading and mineral processing etc. With all the advantages of TG Gravel pump,TGH gravel pump has achieved extra high head for special working conditions.
Slurry pump Volute Liner is an important wetted end parts of slurry pumps ,and slurry pump volute basic part number is 110. It forms a slurry pump chamber with slurry pump throat bush and slurry pump frame plate liner insert where the slurry would flow through them. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the slurry pump.
The slurry pump volute has functions as follows:
1) Closed the slurry pump impeller to a certain space, so that inhaled and forced out liquid through the role of the impeller.
2) Most of Pump volute are made to be Volute-shaped, it is also called the slurry pump casing. Because the area of channel section is widening , the high speed liquid around the slurry pump impeller gradually reduce the flow velocity, and part of the kinetic energy is converted to static pressure can effectively
3) The slurry pump volute liner is not only collected liquid that thrown out by the slurry pump impeller, but also an energy conversion device
4) Lead evenly the liquid to the impeller, collect the high-speed flowed liquid from the pump impeller, and send to the next level or export-led.
5) Realize the energy conversion, Reduce the flow speed, transform the kinetic energy to pressure energy .
6) Connect other components, and play a supporting role.
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of theMAGNUM I pumps.
Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x511 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Mission Sandmaster Pump Designs:
Compact heavy-duty frame design for small space;
Multiple application in the oil and gas industrial;
Full open impeller reduces shaft loading;
Replaceable stuffing box cover,
Available in hard ductile iron, high chrome alloy fluid ends(casing, impeller, wear pad, stuffing box), customized fluid ends in stainless steel or aluminum bronze acceptable;
Available in 8 different size, 3x2, 4x3, 5x4, 6x5, 8x6, 10x8;
One-piece concentric and thicker casing with same power end;
SKF bearings or equal;
Oil or grease lube available; oil lube is for speeds in excess of 2400rpm; 3500rpm is available for 3x2x13 and 4x3x13 pump;
Completely interchangeable with Mission Sandmaster and MCM Mud Master and all other popular brand design in the market;
Spare parts are interchangeable with the standard model.
The pumps can be unitized with hydraulic motors driven.
TH20x18 Mill Discharge Pump is world s standard for heavy duties application. It is designed to easily manage large size particles in dense abrasive and offers the right combination of ruggedness, durability, hydraulics and materials. From the most difficult mill discharge to water flushed crusher, From cyclone feed to regrind, flotation and tailings, The 20x18 pump is the best choice.
Design Features:
Bearing assembly - a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners - easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
Elastomer seal rings back all liner joints.
Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throatbush - wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
One-piece frame - a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump Description:
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Hydroman Submersible Axial and Mixed Flow Sewage Pump Description:
Hydroman Submersible axial and Mixed Flow Sewage Pump is specifically designed to pick up and transport abrasive materials with the least amount of water. The design incorporates the patented Tobee' s agitator, attached directly to the pump shaft, which together with the closed impeller or open impeller, large open passages for the easy passage of solids, heavy duty shaft/bearing configuration and custom built motor with 1.35 service factor, result in the most rugged submersible slurry pump on the market today. In applications where solids are especially difficult to pump, or simply where more agitation is required, Hydroman offers a special high pressure jet ring. This combination of jet ring and agitator have proven to be a truly effective 'agitation team', together pumping solid concentrations of up to 70% by weight.
SP100RV Heavy Duty Sump Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump.
100RV vertical slurry pumps are also used for mill scale pumping, pumping of machine tool cuttings and wood chip pumping applications.
Is there a better way to pump sewage, overflows and other collected dirty water around the plant The answer is Yes. SP vertical slurry pump can solve problems when pumping sewage. For example, the oil pan on the ground is difficult to maintain, pit or hole-in-the-ground slurry handling situation.
Tobee manufactures Andritz alternative ACP, S, VP, FP, CP series Paper & Pulp Stock Pumps and Pumps Wearing Spares, all the pumps and spares parts are widely for Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc.
Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Sandman 8x6x11 Mission Magnum Centrifugal Sand Pump with open type impeller 19121-70-30 and hard iron casing 19763-01-30A is widely used for handle the barite, ferric oxide and mineral oil base drilling muds.
MISSION Magnum I pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. Standard models are equipped with a heavy-duty 2½-in. alloy steel shaft protected from wear by a stainless-steel shaft sleeve, double-row outboard bearings, and inboard roller bearings. They are rated for continuous service in applications up to 200 hp and are available in hard iron, stainless steel, aluminum bronze, and high Chrome with capacities up to 3,400 gal/min and pressure head up to 550 ft. Some sizes can be offered in a counterclockwise rotation giving the user more flexibility.
Mission MAGNUM I Sand Pump
Tobee�® as a professional centrifugal pump manufacturer in China, with more than 34 years of experience in the manufacturing and service of Mission centrifugal pumps and parts. Our pumps are specifically designed to meet the needs of some of the oil and gas drilling, mining, fluid pumping, horizontal directional drilling and well stimulation fracking.
Tobee offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x5x11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
TPR100RV series Vertical Centrifugal Sump Pump with rubber impeller is 100% same and interchangeable with 100RV-SPR rubber lining vertical slurry pump.
TPR100RV Vertical Sump Pump for Mining and Aggregate Slurries, it is also is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 100RV vertical sump slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.
40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available.
Tobee�® 40PV-SP Vertical Slurry Pumps Performance Parameters:
Size: 40mm
Capacity: 19.44-43.2m3/h
Head: 4.5-28.5m
Max. power: 15kw
Handing solids: 12mm
Speed:1000-2000rpm
Submerged length:900-2500mm
150SV-SP Vertical Slurry Pump is available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in Minerals processing, Coal preparation, Chemical processing, Effluent handling, Sand and gravel and almost every other tank, pit or hole-in-the ground slurry handling situation.
65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application. Wetted components are available in a wide range of alloys and elastomers. They are ideally suited for handling abrasive and corrosive liquids and slurries while submerged in sumps or pits.
65QV SP Mining Vertical Slurry Pump for Vertical Immersion Pump
Tobee�® 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Product Brands: Tobee
P/N: 19204-XX-30(641215603) Hard Iron Impeller for NOV Mission Magnum 3x2x13 Centrifugal Pumps.
Tobee Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Design Features:
Full-open wide impeller.
Long life no adjustment mechanical seal available for near zero leakage.
Thick, concentric casing with replaceable casing wear pad.
Hard iron and high chrome alloy material optional.
Large power to ensure large flow rates and head pressure up to 500ft
Small footprint design is versatile for mobile and stationary application.
Working for fracking industrial standard and blending application.
Each casing is approved pressure test prior to delivery.
Heat treatment was done to improve the hardness and wear-resistance to ensure a longer working life.
Shaft sleeves are made by 416SS and ceramic coating to protect shaft from abrasive fluids for extra life.
Mechanical seals can be Tungsten-Tungsten, Tungsten-Silicone, or Silicone-Carbide, all with highly polish sealing face and piton bellow and stainless steel springs.
100% compatible with NOV Mission Magnum XP, MCM XL series and current market offerings.
The pumps can be unitized with Ex-proof electric motors, diesel engines in-line or over-belt driven configuration.
GH series of High Head Gravel Sand Pump is designed specifically for continous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Tobee 10/8 F-GH Gravel Sand Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels.
Tobee 10/8 F-GH Gravel Sand Pump Advantages:
Large drdging depth, high density of dredging mud, good NPSH and stronger suction lift ability
Strong through-put. The pump can persistently discharge gravel, high plastic soil lump and so on
The pump can be directly matched with either motor or diesel engine
Wide application. It can be used in various kinds of soil quality.
Little hydraulic loss, high efficiency and low oil-consumption
Little volume, light weight
Steady operating, little vibration, low noise
Simple & reliable construction, easily disassembly & assembly, convenient maintaining
Reliable sealing without leakage
Long operation life of parts, high reliability of whole set, long MTBF
Obvious economic efficiency and energy-saving
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
19123-01-30A Casing is an important Wear Parts for Mission Magnum 6x5x14 Centrifugal Pump.
All of the pumps feature a concentric casing. This casing averages 37% thicker than conventional pump casings, and up to 50% thicker for the larger, mud pumping models. They are pressure rated at 1 .5 times the flange rating and are designed with a 1 /8â?³ erosion allowance. The concentric style casing has proven to offer the greatest pump life and reduced downtime. The walls of a concentric style casing are an equal distance from the impeller throughout the impeller circumference, which results in a smooth flow pattern. A volute style casing has a cutwater point that disturbs the fluid flow pattern creating an eddy. The concentric casing eliminates vibration, turbulence and aeration that is caused by the cutwater point in conventional volute pumps. It also reduces the high bearing loads and shaft deflection even at near shutoff flows.
The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
20616-1 Stock no. 648408201S Bearing O.B for Magnum Centrifugal Pump 8x6x14, 6x5x14, 6x5x11, 5x4x14, 5x4x11, 4x3x13, 3x2x11.
The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Tobee Vertical Slurry Pump Casing SPR10092 has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Tobee�® Vertical Slurry Pumps without submerged bearings or packings, Customized submerged length and suction agitator available. They are been called Spindle pump, sump pump, column pump, cantilever pump, submerged pump, and open-pit pumps as well.
Tobee�® Identical Vertical Cantilever Pump Metal Model: 40PV-SP, 65QV-SP, 100RV-SP,150SV-SP, 200SV-SP, 250TV-SP, 300TV-SP
Tobee Analogues Vertical Cantilever Pump Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR, 150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR
Tobee�® Replacement Vertical Metal Slurry Pump Wet End Parts:
Vertical Sump Pump Impeller SP40206A05, SP65206A05, SP10206A05, SP15206A05, SP20206A05, SP25206A05, SP30206A05
Vertical Sump Pump Casing SP40092A05, SP65092A05, SP10092A05, SP15092A05, SP20092A05, SP25092A05, SP30092A05
Vertical Sump Pump Back liner SP40041A05, SP65041A05, SP10041A05, SP15041A05, SP20041A05, SP25041A05, SP30041A05
Tobee Alternative Vertical Rubber Slurry Pump Wet End Parts:
Vertical Spindle Pump Impeller SPR40206, SPR65206, SPR10206, SPR15206, SPR20206, SPR25206, SPR30206
Vertical Spindle Pump Casing SPR40092, SPR65092, SPR10092, SPR15092, SPR20092, SPR25092, SPR30092
Vertical Spindle Pump Back liner SPR40041, SPR65041, SPR10041, SPR15041, SPR20041, SPR25041, SPR30041
High Head Gravel Sand Pump is designed specifically for continous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
10/8 F-GH Gravel Sand Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels.
10/8 F-GH Gravel Sand Pump Advantages:
Large drdging depth, high density of dredging mud, good NPSH and stronger suction lift ability
Strong through-put. The pump can persistently discharge gravel, high plastic soil lump and so on
The pump can be directly matched with either motor or diesel engine
Wide application. It can be used in various kinds of soil quality.
Little hydraulic loss, high efficiency and low oil-consumption
Little volume, light weight
Steady operating, little vibration, low noise
Simple & reliable construction, easily disassembly & assembly, convenient maintaining
Reliable sealing without leakage
Long operation life of parts, high reliability of whole set, long MTBF
Obvious economic efficiency and energy-saving
T004M Bearing Housing is used for 16/14TU-AH Horizontal Slurry Pump.
Slurry Pump Bearing Housing is one most important part of bearing assembly for slurry pumps, It contains shaft and bearings, There are four clamp bolts through the base which fasten the slurry pump bearing housing.
Bearing Housing with Shaft for Bearing Assembly of Heavy Duty Slurry Pumps. Introduction: Bearing assembly is an assembled part which comprises parts like shaft, bearing housing, bearings, end cover, labyrinth, etc. and is the rotor part of a slurry pump.Heavy duty roller bearings are housed in a removeable bearing cartridge. Cartridge type with grease lubricated roller bearings designed for more than 60 000 operating hours.
Slurry pump shaft, slurry pump bearing housing, slurry pump bearings, slurry pump end cover, and slurry pump labyrinth, etc.assembled a slurry pump bearing assembly, and is the rotor parts of slurry pump
EAM029A05 Slurry Pump Expeller Ring is an important Hi-seal wearing spares of 10/8 E-M Slurry Pump, Slurry Pump High Seal Parts mainly included: expeller, expeller ring, frame plate liner insert and stuffing box,there will be HS1 after the basic part numbers to represent Hi-seal pump parts, and compare with standard pump parts, the HS1 slurry pump parts are more suitable for sealing at high intake pressures as the large diameter slurry pump expeller.
Slurry Pump Expeller Ring is used for AH/HH/L/M slurry pumps, The expeller ring is together work with expeller for the slurry pumps. They can not only help seal the pump, but also reduce the centrifugal force. The design and material of expeller is significant to its service life, Tobee offers expeller in cast iron, high chrome and rubber materials for options.
Tobee 12/10 AH Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling high abrasive, high density slurries.
Hydroman Electric Submersible Mud Pump Description:
Hydroman Electric Submersible Mud Pump for Mining Reclamation is a versatile solids handing pump designed for Mining and Dredging applications where the water is contaminated with suspended solids such as coal fines, sand, and mud. Used to remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas as well as to irrigate farms and ranches.
The submersible electric motor is protected by a superior double mechanical seal and probes to detect water ingress into the mechanical sea oil chamber. The wear parts is fitted with an integrated agitator, come breaker; this will ensure that only particles of the correct size enter the chamber, plus creating adequate flow turbulence to keep suspended solids flowing.
100RV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobeea 150SV-SP vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
SPR65092R55 Casing Spares on 65QV-SPR Vertical Cantilever Sump Pumps.
Tobeea Vertical Spindle Pumps are available in a wide range of popular sizes to suit most pumping applications:
Minerals processing
Coal preparation
Chemical processing
Effluent handlin
Abrasive and/or corrosive slurries
High density slurries
Sand and gravel
and almost every other tank, pit or hole-in-theground slurry handling situation.
Slurry Pump Spares in S42 Rubber are widely used for Chemical fertilizer plant, Chemical, gold, copper, nickel, tar etc.industry,because S42 is a kind of neoprene rubber has good physical and mechanical properties and high tensile strength, acid and alkali resistance, Chemical reagent resistance, good resistance to inorganic acid and alkali corrosion.
Slurry pumps from Tobee are manufactured in a number of materials, to suit a wide range of operating conditions. Elastomeric materials, including natural rubber, synthetic rubbers and polyurethane offer unique combinations of erosion wear resistance and chemical resistance and are suitable for use in many slurry pump applications.
Tobee Hi-seal Stuffing Box G078HS1D21 is one of shaft seal parts in 10x8ST-AH Centrifugal Slurry Pump. It also can be installed on 12x10ST-AH Slurry Pump and 14x12ST-AH Slurry Pump.
Slurry pump stuffing box of a sailboat will have a stern tube that is slightly bigger than the prop shaft. It will also have packing nut threads or a gland nut. The packing is inside the gland nut and creates the seal. The shaft is wrapped by the packing and put in the gland nut. Through tightening it onto the stern tube, the packing is compressed, creating a seal against the shaft. Creating a proper plunger alignment is critical for correct flow and a long wear life. Stuffing box components are of D21 cast iron, A05 high chrome, stainless steel, brass or other application-specific materials.
Andritz ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
Andritz ACP Specifications:
Flow rates up to 6,000 m�³/h
Heads up to 160 m
Casing pressure up to 25 bar
Temperatures up to 200�°C
Consistencies up to 6%
Efficiency up to 90%
Tobee mainly manufacture Andritz Paper Pulp Pumps and Spares Parts, such as Andritz ACP, S, CP, VP, FP etc paper pulp pumps and Andritz Spares Parts.
Tobee�® Andritz Single-stage Centrifugal Pump Specification:
Pump type: Horizontal
Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel
Seal arrangement: Mechanical Seal, Double Seal
Max temperature: 200 Celsius
Tobe ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
Tobee FP Fan Pump also called low pulse paper pulp pump, It is a new pump type for paper making industry with advatages of high efficiency, low pulse and high dependability. It is used for transporting the paper pulp concentration â?¤1% in medium-high speed paper making machine for supplying pulp system.
Tobee�® Andritz Paper Pump Specification:
Size: 150-500mm
Capacity: 160-2000m3/h
Head: 14-40m
Concentration: 1%
Temperature: 80
Materials: Cast iron, SS304, SS316L, Duplex stainless steel etc
Tobee Andritz Paper Pump Design Features:
1. Double Suction, high efficiency, low pulse closed Impeller design.
2. Split Case Structure, easy to install and maintain.
3. Especially for the supplying paper pulp system of medium-high speed paper making machine
4. Oil Lubrucation,running stable,long service life.
5. Packing seal and mechnical seal for options
6. High abrasive and corrosive materials are available for various paper pulp.
Tobee 6/4inch Pump can be installed with metal lined or rubber lined as per the different application on site. with the wet parts: Impeller E4147A05, E4147R55, Volute liner E4110A05, Frame Plate Liner E4036R55, Cover plate liner F4018R55, Frame Plate liner insert E4041A05, Throat bush, E4083R55
Tobee�® 6/4E-AH heavy duty rubber slurry pumps are ready for partners' project, 6/4D-AH, 6/4E-AH rubber lining mining slurry pumps for handling highly abrasive, high density slurries in metallurgy industry, mining industry, coal, power, chemical, building material and other industrial departments. The pumps of these models also can be installed as multi-stage series.
4inch AHR Rubber Lined Slurry Pump is the standard heavy duty slurry pumps which designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, It maintains high efficiencies over the wear life of its components. 6/4 slurry pump typically used in process plant transfers, wet waste processes, recycling-washing plants, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.
Tobee Alternative 500F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Tobee Alternative 500TL Slurry pump spare parts:
500T-L Slurry pump impeller TL50147A05;
500T-L Slurry pump rare plate TL50041A05;
500T-L Slurry pump throat bush TL50083A05;
500T-L Slurry pump volute liner TL50110A05;
500T-L Slurry pump Lantern Restrictor T118C23;
500T-L Slurry pump Seal Volute T50124S01
500T-L Slurry pump Shaft sleeve T076C21, T076C23, T076J04, T075C21;
500T-L Slurry pump Stuffing Box TL500278D21;
500T-L Slurry pump Expeller TL50028A05;
500T-L Slurry pump Expeller ring TL50029A05;
500T-L Slurry pump Gland assembly T044C02;
500T-L Slurry pump frame plate linerTL50043MRU55;
Tobee Alternative 500F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Tobee Alternative 500TL Slurry pump spare parts:
500T-L Slurry pump impeller TL50147A05;
500T-L Slurry pump rare plate TL50041A05;
500T-L Slurry pump throat bush TL50083A05;
500T-L Slurry pump volute liner TL50110A05;
500T-L Slurry pump Lantern Restrictor T118C23;
500T-L Slurry pump Seal Volute T50124S01
500T-L Slurry pump Shaft sleeve T076C21, T076C23, T076J04, T075C21;
500T-L Slurry pump Stuffing Box TL500278D21;
500T-L Slurry pump Expeller TL50028A05;
500T-L Slurry pump Expeller ring TL50029A05;
500T-L Slurry pump Gland assembly T044C02;
500T-L Slurry pump TL50043MRU55;
Tobee Alternative 500F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Tobee Alternative 500TL Slurry pump spare parts:
500T-L Slurry pump impeller TL50147A05;
500T-L Slurry pump frame plate liner insert TL50041A05;
500T-L Slurry pump throat bush TL50083A05;
500T-L Slurry pump volute liner TL50110A05;
500T-L Slurry pump Lantern Restrictor T118C23;
500T-L Slurry pump Seal Volute T50124S01
500T-L Slurry pump Shaft sleeve T076C21, T076C23, T076J04, T075C21;
500T-L Slurry pump Stuffing Box TL500278D21;
500T-L Slurry pump Expeller TL50028A05;
500T-L Slurry pump Expeller ring TL50029A05;
500T-L Slurry pump Gland assembly T044C02;
500T-L Slurry pump fram plate liner TL50043MRU55;
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Tobee�® 150E-L Slurry Pumps Performance Parameters:
Size: 150mm
Capacity: 115-568.8m3/h
Head: 10.5-51.8m
Pressure: Max. 250psi
Density: Max.1.35
Materials: Hyper chrome alloy, Rubber, Polyurethane etc.
Tobee Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Tobee Impeller SL30147A05 is made from A05 that will be used for 300S-L Horizontal Slurry Pump.
The slurry pump impeller is one of the most important parts of the slurry pumps. It is located in the pump casings on the shaft and connects with the motor to form a centrifugal force system. When the motor drives the impeller to rotate, the blades force fluid to rotate, increasing its pressure, potential energy, and kinetic energy. At the same time, under the force of inertia, fluid flows from the center to the edge of the impeller, out at a very high speed, and passes through the discharge pipeline to be transported. When an impeller is rotating, and in good condition, the slurry pump can easily meet output expectations. however, highly prone to wear and require regular maintenance to ensure efficiency.
Design Features:
â?? Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Ductile iron fully lined casing provides durability, strength, safety, and long service life.
â?? Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to reduce internal Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.
Designed for rugged duties while offering excellent efficiencies.
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.
Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Mechanical seals reduce flush water usage, minimizing pump operating costs.
40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available.
Tobee 40PV-SP Vertical Slurry Pumps Performance Parameters:
Size: 40mm
Capacity: 19.44-43.2m3/h
Head: 4.5-28.5m
Max. power: 15kw
Handing solids: 12mm
Speed:1000-2000rpm
Submerged length:900-2500mm
Materials:High chrome alloy, Rubber, Polyurethane etc.
Tobee 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Tobee S Series Pumps and Pump Spares are widely used in papermaking, pulp mills, pulp medium of transportation, also applies to enterprise sugar, starchprocessing, chemical raw materials, such as the transmission medium.
Tobee S Paper Stock Pulp Pump SPECIFICATIONS:
Size: 1"-16" Pump
Capacity: 30-3300m3/hr
Head: 3-100m
Working temp.: 120
Concentration: 0%-7%
Material:Cast iron, Cast steel, SS304, SS316L, Duplex stainless steel etc
Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
135.2 Rear Liner is one of wear parts for Andritz S series Pump S125-400 DD.
The Rear Liner 135.2 suitable for Andritz S Series, the model: S 80-265, S 100-265, S 125-265, S 100-350, S 125-350, S150-330, S125-400, S 150-400, S 200-380, S 150-470, S 200-470, S 250-430, S 350-470, S 500-600, S 600-700.
Tobee�® manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc
Tobee�® Pump is always making continuous optimization of materials like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, Viton, Fluoroplastic, Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive & corrosive materials for various applications.
Such as impeller: EN-GJL 250, 1.4460 and 1.4517, casing/casing cover: EN-GJL 250 and 1.4460, volute casing: EN-GJL 250, EN-GJS-400-15 and 1.4460, bearing housing EN-GJL 250 and 1.4468, front and rear lining: 1.4460 and 1.4517, stuffing box body EN-GJL 250, 1.4460 and 1.4408, shaft: 1.4021 & 1.4462 and 1.4404 & 1.4439, etc.
ANDRITZ S & ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%. S series and ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
ANDRITZ FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m�³/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
The Mission Magnum Pumps and Stuffing Box are rated for continuous service in applications up to 200 hp and are available in Hard Iron, Stainless Steel, Aluminum Bronze, and High Chrome.
An easily removable stuffing box allows these pumps to be customized to meet customer needs. The different options available are stuffing boxes to accommodate:
â?¢ Shaft packing
â?¢ Single mechanical seal
The packed box has a tapped opening to the lantern ring to allow grease lubrication or a flush line to be attached.
Dual stuffing box bolts are positioned 180 degrees apart to hold the stuffing box in position during casing removal. When only one stuffing box bolt is used the stuffing box remains in position on one side while the other side moves with the casing, causing the casing to bind and make removal difficult.
Inboard Bearing Cover Labyrinth Seal H2564-4 P/N 2564-4H Buna-n used for 2500 Supreme 3 x 2 x 13, 4 x 3 x 13, 5 x 4 x 14, 6 x 5 x 11, 6 x 5 x 14, 8 x 6 x 11, 8 x 6 x 14, 10 x 8 x 14 Pumps.
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine also known as stainless steel submersible slurry pump are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel, meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine Features
Best structure design of submersible sand pump, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protection, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals.
The stainless series submersible agitator slurry pump is suitable for all light acid, corrosive and/or sea water application fluid in pH values between 4 to 10pH.
For strong acidity and alkalinity applications, please use the specified chemical vertical submerged pump.
Investment Casting Precision casting with the use of an advanced stainless investment casting method that produces the highest quality with a smooth surface finish.
Viton O-rings are used throughout the stainless steel submersible slurry agitator pump to give better pump life in corrosive acid and aggressive media.
Austenitic Stainless Steel SS316 water application of light acid-base.
Spare Parts for 65QV-SP, 100RV-SP, 150SV-SP Vertical Slurry Pumps.
Mainly SP Metal Lined Vertical Sump Pump Parts:
Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel.
G refers to submerged depth 1200mm;
J refers to submerged depth 1500mm;
L refers to submerged depth 1800mm;
M refers to submerged depth 2000mm;
Q refers to submerged depth 2400mm;
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Upper Strainer - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
Lower Strainer - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
32056RU Impeller of 3 vanes for 3x2 C-SC series rubber lined slurry pumps, which are suited for processing the chemical acid slurries.
Tobee�® Provides replacement SC and L series pump wet parts that are able to be interchangeable. Both types smaller pumps with Semi-open impellers. The material of the wet parts can be used as A05, A07, A33, A49, A51, A61, and natural rubber spares. Today we are talking about the A49 Alloy and rubber spares. They have the same function to prevent erosion and corrosion.
Tobee C090 Slurry Pump Shaft Seal is been called slurry pump shaft seal ring, Double Lip Seal as well, which is a kinds of seals spare parts of 1.5/1C-HH, 3/2C-AH Slurry Pumps, 4/3C-AH, 4/3C-SC, 75C-L Slurry pumps.
Slurry Pump Intake Joint is used for sealing the pump with inlet pipeline or inlet valve for preventing leak from suction end, It is installed on slurry pump suction flange.
SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Vertical Sump Slurry Pumps Spare Parts Design features:
â?¢ Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
â?¢ Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings.
â?¢ Large Particle - Large particle impellers are also available and enable passing unusually large solids.
â?¢ Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft.
â?¢ Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures.
â?¢ Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered.
â?¢ Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
â?¢ Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Hydroman Submersible is axial and Mixed Flow Sewage Pump is specifically designed to pick up and transport abrasive materials with the least amount of water. The design incorporates the patented Tobee' s agitator, attached directly to the pump shaft, which together with the closed impeller or open impeller, large open passages for the easy passage of solids, heavy duty shaft/bearing configuration and custom built motor with 1.35 service factor, result in the most rugged submersible slurry pump on the market today. In applications where solids are especially difficult to pump, or simply where more agitation is required, Hydroman offers a special high pressure jet ring. This combination of jet ring and agitator has proven to be a truly effective 'agitation team', together pumping solid concentrations of up to 70% by weight.
024E65 End Cover
Hydroman Electrically Powered Slurry Pump Description:
Electrically Powered Slurry Pump Solution to Transfer Sand are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors.Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman�® offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc.
ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
Product Description:
12x10ST-AH Slurry Pump is robust state of the art slurry pumps that feature oil or grease lubrication bearing assemblies and complete interchangeable with other major brands. The 12x10 centrifugal slurry pump can be supplied in high chrome alloy materials specifically designed for heavy duty slurry applications.
Tobee 40PV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee F8083R55 Throat Bush is a wetted part used for 10/8E-M Rubber Slurry Pump. the wet end spares include: impeller F8147R55, Cover plate liner F8018R55, Frame Plate Liner F8036R55, Throat Bush F8083R55.
Tobee Sandmanâ?¢ manufacture the Mission Magnum I series centrifugal pumps 6x5x14 pump with 14 inch open type impeller 19121-XX-30 for drilling liquid.
Mission Magnum I Pump Design Feature:
â?¢ Wider impellers and increased re-circulation areas. Each feature,contributes to reducing wear when handling abrasive fluids.
â?¢ Concentric casing that is an average of 37% thicker than conventional pump casings, The concentric style casing has proven to offer the greatest pump life and reduced downtime.
â?¢ The shaft is much larger in diameter than conventional pump shafts for heavy-duty performance, minimum deflection and increased operating life of the seal or packing.
â?¢ A type I single tungsten carbide vs. tungsten carbide mechanical seal is standard. Tungsten carbide has proven itself as a highly abrasive resistant material with a Ph range of 7 to 14.
â?¢ An easily removable stuffing box allows these pumps to be customized to meet customer needs.
â?¢ Magnachrome impellers have a 400 Brinell hardness and Magnachrome casings and stuffing boxes feature a 600 Brinell hardness.
Mission Magnum I Pump Applications:
Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, etc.
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Tobee OEM dredger pump parts are better than others on the market, because we are a professional dredged pump spares manufacturer, we know the exacting tolerances and engineering standards required to build and the maintain these pumps, and the dredge pump replacement spares we supply are identical to the parts of IHC dredger pumps.
Tobee Pump is able to make prototypes or molds needed for mass producing OEM slurry pump parts according to the technical drawing you provided. Tobee Pump also offers reverse engineering services where we measure existing slurry pump parts samples, creating a technical drawing, and make prototypes or molds in order to produce OEM slurry pump parts. During the mass production of OEM slurry pump part samples, our technicians would set out the complete tolerance bands for each dimension of the parts based on where they are going to be fitted. This is to ensure optimal interchangeability of our slurry pump parts with original samples. We produce a wide range of OEM slurry pump wetted parts that are 100% interchangeable with many popular slurry pump models in the world.
OEM Pump Parts Materials:
Wear-resistant high-chrome alloys: contains Cr15, Cr27,Cr29, Cr30, or Cr35 etc
Grey iron, ductile iron: HT200, HT250, QT500-7, QT400-12,cast steel etc
Stainless steel: 304, 316, 316L, 904L, CD4MCu, duplex stainless steel etc
Rubber: natural rubber, butyl rubber, chloroprene rubber, hypalon, etc.
Other Materials: polyurethane, ceramic, copper, brzonze, aluminum etc
TL45018R55 Cover Plate Liner is one of the rubber wear parts for 450ST-L Rubber Lined Slurry Pumps.
Tobee�® R55 Cover Plate Liner TL45018 is the main wear parts suit for 450ST-L Rubber Lined Slurry Pump, and it is very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber and metal materials selection for most all duties in mill.
Our Slurry Pump Cover Plate Liners are normally made in premium natural rubber R55 that offers 1.5 times service life of normal liner rubber R26. They work under longtime impact of abrasive and corrosive slurries in the high speed. And it used for for Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailing, Aggregate Processing, Ash Handling.
Tobee offers a wide variety of natural rubber and synthetic rubber for the majority of slurry pump parts in both horizontal slurry pumps and vertical slurry pumps. A sample of our elastomer options: Natural Rubber, Neoprene, Hypalon, EPDM, Nitrile, Butyl, Polyurethane etc.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances. Tobee offers ZWZ, SKF, TIMKEN, NSK, FAG, NTN brands for different options.
Tobee 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Tobee�® 300F-L Light Duty Slurry Pump Wet End Parts:
300F-L, 300FF-L Slurry Pump Impeller RSL30147A05, RSL30147R55, RSL30147S42
300F-L Slurry Pump Frame Plate Liner Insert SL30041MA05;
300F-L Slurry Pump Volute Liner SL30110A05;
300F-L Slurry Pump Throat Bush SL30083MA05;
300F-L Slurry Pump Bearing Assembly FRS005M;
300FF-L Slurry Pump Bearing Assembly FFRS005M;
300F-L Slurry Pump Stuffing Box RSL30078D21;
300F-L Slurry Pump Shaft Sleeve RS076C21, etc.
Tobee 300F-L Light Duty Slurry Pump Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Ductile iron fully lined casing provides durability, strength, safety, and long service life.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs.
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.
Designed for rugged duties while offering excellent efficiencies.
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.
Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Mechanical seals reduce flush water usage, minimizing pump operating costs.
P/N: 19204-XX-30(641215603) Hard Iron Impeller for NOV Mission Magnum 3x2x13 Centrifugal Pumps.
Tobee S Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Tobee�® S Series Paper Stock Pumps are widely used in papermaking, pulp mills, pulp medium of transportation, also applies to enterprise sugar, starchprocessing, chemical raw materials, such as the transmission medium.
Available Interchangeable Andritz S Pumps Models and Spares:S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc
100% Equivalent Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
Alternative S series Pump Models and Spares:
S80-265, S100-265, S125-265, S3 100-350.3, S125-350, S150-330, S3 125-400, S3 150-400.3, S3 200-380, S8 200-380, S3 150-470.3, S3 200-470.3, S3 250-430.3, S3 350-470.3, S8 350-470.6, S500-600, etc
Andritz ACP Series Centrifugal Paper Pulp Pumps are available with closed, semi-open or open impellers with 3 vanes or 6vanes in a highly wear-resistant design. These pumps are suitable for conveying many different media. Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content up to consistencies up to 8%.ACP series paper pulp pumps are wide used in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, water supply, waste water treatment, desalination plants, and irrigation as well as drainage etc.
Tobee�® Andritz ACP Specifications:
Base: U-steel
Bearing: SKF, NSK, TIMKEN, HRB
Shaft: 40CrMo, SS316L,Duplex SS
Mechanical seal: Burgmann
Packing seal: Asbestos fibers+mica, PTFE
Wear parts: Cast iron, Cast steel, Stanless steel, Duplex SS, Chrome etc
Tobee�® Andritz ACP paper stock pumps and pump spares:
ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc.
Tobe mainly manufactures Andritz Paper Pulp Pumps and Spares Parts, such as Andritz ACP, S, CP, VP, FP etc paper pulp pumps and Andritz Spares Parts.
Andritz Single-stage Centrifugal Pump Specification:
Pump type: Horizontal
Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel
Seal arrangement: Mechanical Seal, Double Seal
Max temperature: 200 Celsius
Tobee Paper Pulp Centrifugal Pumps Applicable Industries:
1 Paper industry: for conveying pulp with a concentration of less than 6% and for circulating, lifting, and pressurizing the medium in the industrial process of alkali recovery.
2 Sugar industry: used for conveying syrup with concentration below 4% and viscosity below 150mm2/s.
3 Urban sewage industry: used for circulation conveying, lifting and pressurization of medium in sewage treatment process. Water and watewater treatment. transport the non-abrasion medium in other industries.
Tobee Andritz Pump Spare Parts namely the pump parts have direct connection with slurry, are very crucial to the service life of slurry pumps. The wet parts, include impeller, liner, throatbush, frame plate liner insert, casing, etc., are very easily worn-out components because they work under longtime impact of abrassive and corrosive slurries in the high speed. For the long service life of pump parts, the material plays an important role here.
3/2C-AH Slurry Pump is a heavy-duty slurry pump that designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry pumps offer unmatched power consumption, long component life, and unmatched reliability.
Tobee�® 3/2 C AH Slurry Pumps Performance Parameters:
Size: 3" x 2"
Capacity: 39.6-86.4m3/h
Head: 12-64m
Speed: 1300-2700rpm
NPSHr: 4-6m
Eff.: 55%
Power: Max.30kw
Handling solids: 25mm
Seal arrangement: Packing seal, Expeller seal, Mechanical seal
18x16TU-G Dredging Slurry Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life, It is mainly suitable for delivering slurry, sand, gravel, sludge, mud, blast slag and other abrasive medium. Especially suitable for the high flow, high concentration and high head working conditions.
TG18x16TU river sand pumpgravel pumping equipment Mud and sand pumps with diesel engine
Diesel Engine Gravel Sand Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. It is can be used for handling large particles at consistently high efficiencies results in low cost of ownership. only uses the best materials for our pumps' components (casing, impeller, wear plates etc.).
Gravel Sand Pump is single-stage single-casing horizontal dredging pump driven by diesel engine through a gearbox, The materials of gravel pump wear parts are made from high chrome alloy with hardness is no less than 60HRC, adopting grease lubrication for bearings to ensure stable running on the strong frame, It is widely used in the river platform, barges, marine ship or dredger for pumping sands, gravels, slurries, muds, sludges, stones or other big particle solids etc.
250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
12x10E-M Centrifugal Slurry Rubber Impeller F10147R55 Wearing Spares Parts Supply.
Tobee manufactures impellers with metal, rubber, and polyurethane materials etc, impeller for horizontal slurry pump, impeller for vertical slurry pump, impeller for gravel sand pump, and impeller for forth slurry pump etc.
Tobee offers three different types of slurry pump impellers: open, closed, and semi-closed. Each has its own strengths and weaknesses, depending on the application. Some are better for solids handling, others are better for high efficiency. To learn more about the specifics of each type of slurry pump impeller.
Tobee Rubber Slurry Pump Main parts:
Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge-type housing in the frame.
Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure-molded elastomers. Elastomer seal rings back all liner joints.
Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump Description:
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Tobe 40PV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 65QV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Slurry Pump Polyurethane Parts are made by the material of a polymer composed of organic units joined by carbamate (urethane) links, so the work life of Polyurethane slurry pump parts is longer than Rubber materials for 3~5 times, Slurry Pump Polyurethane Spare Parts include Impeller, Throat bush, Frame plate liner, Cover plate liner, Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here.
The Main Parts for Slurry Pump Polyurethane Spare and Parts:
Polyurethane Slurry Pump Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Slurry Pump Polyurethane Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Polyurethane Slurry Pump Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
64017M R55 Cover Plate Liner is one of 6/4 DSC Slurry Pump Rubber Wet Parts, slurry pump rubber cover plate liner is the main wear parts for the rubber lined slurry pump and normally made in premium natural rubber R55 that offers 1.5 times service life of normal liner rubber R26.
Rubber Slurry Pump Impeller, Rubber Slurry Pump Frame Plate Liner, Rubber Slurry Pump Cover Plate Liner and Rubber Slurry Pump Throat bush constitute a whole wetted end parts for rubber lined slurry pumps.
6/4 D SC Slurry Pump Rubber Wet Parts List:
64017M R55 Cover Plate Liner
64114 R55 Vane Open Impeller
64036M R55 Frame Plate Liner
12x10F-G Gravel and Dredge Slurry Pumps are designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution.
12x10F-G Gravel Pump is a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy assembly, The discharge outlet can be adjusted at any direction, It is world's standard for dredge, gravel or large particle slurries applications.
Design Features:
Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving.
Large dredging sand depth, high density of dredging mud, good pump NPSH and strong suction lift ability.
Strong through-put, The dredging pump can persistently discharge gravel, high plastic soil lump,etc.
Wide application, The sand pump can be used in various kinds of soil quality.
The TG sand pump can be directly matched with electric motor or diesel engine.
The TG sand pump impeller is 3 or 5 vanes for large particles delivering.
Little hydraulic loss, high efficiency and low oil-consumption.
Steady operating, little vibration, low noise.
Simple & reliable constriction, easily disassembly & assembly, convenient maintain.
Reliable sealing without leakage.
Long operating life of wear parts.
Tobee manufacture replacement Andritz S series Pumps and Parts, Andritz ACP series Pumps and Parts, Andritz FP series Pumps and Parts, Andritz VP series Pumps and Parts, Andritz CP series Pumps and Parts etc.
Tobee�® manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps, VP series pumps, CP series pumps etc.
Tobee Slurry pumps are recommended for pumping liquids containing small or large suspended solids. They are designed for continuous pumping of highly abrasive and corrosive slurry. The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry.
Tobee�® 4-3C-AH Slurry Pump for Cleaning coal thickening cyclone, Cyclone underflow pump is a type of centrifugal pump, lobe pump or peristaltic hose pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energy.
Tobee�® 4x3C AH Slurry Pump SPECIFICATIONS:
Size: 4" x 3"
Capacity: 86.4-198m3/h
Head: 9-52m
Speed: 1000-2200rpm
NPSHr: 4-6m
Eff.: 71%
Power: Max.30kw
Handling solids: 28mm
Materials: A05, A07, A33, A49, A51, A61, R08, R26, R55, U01 U38 etc
4x3DD-AH Polyurethane Slurry Pumps are made of polyurethane cover plate liner and polyurethane frame plate liner which wear resistance is excellent. with polyurethane liners D3018U38, D3036U38, and Impeller D3147U38.
4/3DD-AH Polyurethane Slurry Pump Designs:
4x3DD-AH slurry pump with polyurethane lining with excellent hydrolysis resistance, oil, acid and alkali, corrosion resistance. It can be used in any mineral processing, transportation environment, etc.
Polyurethane pumps have the advantages of high conveying efficiency, because the surface is smooth, no burrs, non-stick materials, low friction coefficient, and the material running resistance is small.
â?¢ Slurry pump polyurethane liners sets of special production process makes the polyurethane is directly cast with a steel skeleton, polyurethane adhesive layer and steel skeleton bonding firmly, not degumming, continuous layer.
â?¢ Polyurethane lined pump has excellent resilience and impact resistance, which can effectively reduce the impact of the conveying medium on the pump.
The wear resistance of polyurethane slurry pump is generally more than 3-5 times that of rubber slurry pump parts and metal slurry pump parts, and the life of polyurethane slurry pump parts is longer, thereby replacing low frequency and high efficiency.
Tobee Slurry Pump Rubber Cover Plate Liner F8018R55 is the main wear parts for the 10x8 AH Rubber Lined Slurry Pumps, and it deals with the corrosive slurry with blunt particles.
As one of main wetted parts, Cover plate liner is very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber and metal materials selection for most all duties in mill.
Tobee offers a wide variety of natural rubber and synthetic rubber for the majority of slurry pump parts in both horizontal slurry pumps and vertical slurry pumps. A sample of our elastomer options: Natural Rubber, Neoprene, Hypalon, EPDM, Nitrile, Butyl, Polyurethane etc.
Tobee F8036R55 Frame Plate Liner is a wetted part used for 10/8E-M Rubber Slurry Pump. the wet end spares include: impeller F8147R55, Cover plate liner F8018R55, Frame Plate Liner F8036R55, Throat Bush F8083R55.
Tobee F8147R55 Impeller is a wetted part used for 10/8E-M Rubber Slurry Pump. the wet end spares include: impeller F8147R55, Cover plate liner F8018R55, Frame Plate Liner F8036R55, Throat Bush F8083R55.
Description
22451-1 Mechanical Seal is used for Mission Magnum Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14.
Type 1-2. seal is identical to Mission pump seal NOV# 22451-1, 648414308 and T1-3.5 is identical to Mission Magnum XP pump seal NOV#24306, 658416102.
Mechanical seal (Tungsten carbide faces), P/N: 22451-1, 648414308; 22451-2, 648414340; 22451-3, 648414357; 22451-9A
Dimensions: 3.5inch, 2.5 inch, 1.875 inch and 1.5 inch
Material: Tungsten Carbide, Viton, SS316 machining parts
Seal, Mechanical (Tungsten carbide faces), P/N: 22451-1, 648414308
Seal, Mechanical (ceramic to carbon face), P/N: 22451-2, 648414340
Seal, Mechanical (silicon to tungsten face), P/N: 22451-3, 648414357
Seal, Mechanical (silicon carbide faces), P/N: 22451-9A
Packing shaft with lantern ring (Graphite), P/N: 25014-04M-B, 661007005
Packing shaft with lantern ring (King), P/N: 25014-04M-BA, 661007008
Packing shaft with lantern ring (Teflon), P/N: 250147-04M-D, 661007011
Packing shaft with lantern ring (Kevlar), P/N: 25014-04M-C, 661007006
Packing, Shaft -M.S. Backup (Graphite), P/N: 648402600
Ring, Lantern, or Lantern Ring, P/N: 648408607
A set of mechanical seal includes Mechanical seal, 3 pcs packings and a pin.
Replacement AHLSTAR APP/T 51-300 end-suction single-stage centrifugal process pumps with cartridge mechanical seal are used for Clean and lightly contaminated liquids, Viscous liquids, Fibrous slurries, Large solids containing liquids and Gas containing liquids and self-priming applications.
APP High performance process pumps for demanding applications
AHLSTAR APP end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.
APP 51-300 Pump Mechanical Seal Design Features:
The cartridge seal forms one solid unit having its own sleeve, fixing flange, seal faces, springs and all necessary O-rings, gaskets, setting clips and fixing crews.
By the setting clips, the cartridge seal is set radially and axially in the right location during assembly.
The seal is fixed on the pump shaft or on the shaft sleeve by set screws and into the casing cover by studs and nuts utilizing fixing slots (4x90) on the seal flange.
Since cartridge seals can be fitted to the standard casing cover of all kinds of pumps and rotating flow machines, it is possible to use the same seal types in a variety of pumps and other machines.
Mechnical Seal TIH-65-50-160-SS316L for Sea Water Pumps, Centrifugal Chemical Pumps.
Slurry Pump Mechanical Seal is mainly used for chemical slurries, dredging, alumina plant, flue gas desulfurization systems power plant ash handling systems, pulp and paper and other industries, It can be installed on slurry pump, gravel pump, dredge pump, FGD pump, sewage pump, clean water pump, chemical pump, oil pump for different work condistions.
Chemical Pump is single-stage end-suction (axial suction) cantilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. The marked and rated performances and dimensions adopt ISO2858 international standard. It has wide performance range, high efficiency, high mechanical, chemical, physical level and convenient maintenance. It is widely applied to transport various corrosive media or media in which pollution is forbidden similar to water in such industries as chemical industry, petroleum, metallurgy, electric power, papermaking, food, starch factory, pharmacy and synthetic fiber etc.
P/N: 22451-1 (648414308) Seal, Mechanical Tungsten Carbide for Mission Magnum type Centrifugal Pumps.
Type 1-2.5 seal is identical to Mission pump seal NOV 22451-1, 648414308 and T1-3.5 is identical to Mission Magnum XP pump seal NOV#24306, 658416102.
Mechanical seal (Tungsten carbide faces), P/N: 22451-1, 648414308; 22451-2, 648414340; 22451-3, 648414357; 22451-9A
Dimensions: 3.5inch, 2.5 inch, 1.875 inch and 1.5 inch
Material: Tungsten Carbide, Viton, SS316 machining parts
Seal, Mechanical (Tungsten carbide faces), P/N: 22451-1, 648414308
Seal, Mechanical (ceramic to carbon face), P/N: 22451-2, 648414340
Seal, Mechanical (silicon to tungsten face), P/N: 22451-3, 648414357
Seal, Mechanical (silicon carbide faces), P/N: 22451-9A
Packing shaft with lantern ring (Graphite), P/N: 25014-04M-B, 661007005
Packing shaft with lantern ring (King), P/N: 25014-04M-BA, 661007008
Packing shaft with lantern ring (Teflon), P/N: 250147-04M-D, 661007011
Packing shaft with lantern ring (Kevlar), P/N: 25014-04M-C, 661007006
Packing, Shaft -M.S. Backup (Graphite), P/N: 648402600
Ring, Lantern, or Lantern Ring, P/N: 648408607
A set of mechanical seal includes Mechanical seal, 3 pcs packings and a pin.
Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition, So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.
Slurry Pump Mechanical seal is widely used in chemical slurries, alumina plant, FGD systems, power plant ash handling systems, pulp and paper and other industries. The mechanical seal consists of a stationary and a rotating face pressed together under mechanical and hydraulic pressure to prevent leakage. Silicon carbide is the most common material used for manufacture of these seal faces. The use of mechanical seals in slurry applications requires extreme care and attention due to the limited reliability common in this developing area. Sea costs are relatively high and require substantial justification to warrant their use.
Tobee�® Slurry Pump Mechanical Seal is mainly used for chemical slurries, dredging, alumina plant, flue gas desulfurization systems power plant ash handling systems, pulp and paper and other industries, It can be installed on slurry pump, gravel pump, dredge pump, FGD pump, sewage pump, clean water pump, chemical pump, oil pump for different work condistions.
Tobee Replacement AHLSTAR APP/T 51-300 end-suction single-stage centrifugal process pumps with cartridge mechanical seal are used for Clean and lightly contaminated liquids, Viscous liquids, Fibrous slurries, Large solids containing liquids and Gas containing liquids and self-priming applications.
APP High performance process pumps for demanding applications
AHLSTAR APP end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.
20622A Packing Gland Assembly 20622A is used for Magnum 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14 Pumps.
Part No.: 20622A
Stock No.: 64110338
The Gland Assembly, Packing is mainly used to compress the packing to ensure the tightness between the packing and the shaft sleeve. It will be contacted with the packing shaft and deflector assembly to act as a seal.
Tobee�® offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
As a China-based slurry pump parts manufacturer, Tobee�® provide a broad range of slurry pump rubber parts included rubber impellers, liners and plates, froth pump rubber parts, medium/light duty slurry pump rubber parts, sump pump rubber parts, FGD(flue gas desulfurization) pump rubber parts and customized rubber pump parts.
The rubber slurry pump parts are widely used in fine slurry conditions and lower PH to 2. Rubber pump parts are also many rubbers for different conditions, Tobee offers the full rubber pump parts including R08, R24, R26, R33, R38, R55, R66, S01, S10, S12, S21, S31, S42, S44, S50 etc.
SL35029A05 Expeller Ring is used for 350S-L Slurry Pumps, It is an important Hi-seal wearing spares of slurry pump.
Slurry Pump Expeller Ring is used for AH/HH/L/M slurry pumps, The expeller ring is together work with expeller for the slurry pumps. They can not only help seal the pump, but also reduce the centrifugal force. The design and material of expeller is significant to its service life, Tobee offers expeller in cast iron, high chrome and rubber materials for options.
