Tobee manufacture the Andritz replacement Pump Spare Parts Front Lining ACP300-700 and full 100% warranty and reliability.
The Standard-Front Lining of 300-400 Single-stage Centrifugal Pump is made by standard or standard. Standard-Front Lining is Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content with consistencies of up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. centrifugal pumps from the series can be delivered with and for an Industrial Internet of Things upward integratable base.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Tobee manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc. ANDRITZ ACP and S series Pump Specifications: Design:single-stage, single-flow, open and semi-open impeller Consistency:up to 8% Head:10-180 m Flow rate:up to 8,000 m3/h Pressure:up to 40 bar Temperature:up to 200 Efficiency:up to 90%
manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc. ANDRITZ ACP and S series Pump Specifications: Design:single-stage, single-flow, open and semi-open impeller Consistency:up to 8% Head:10-180 m Flow rate:up to 8,000 m3/h Pressure:up to 40 bar Temperature:up to 200 Efficiency:up to 90% ACP Centrifugal Pump Design: Impeller(230) Accelerating the medium by charging it with energy. Semi-open impeller with vanes on the back. Spiral casing (102) Guiding the medium with a favorable flow pattern, converting speed energy into pressure energy. Pressure-sealed pump casing with delivery and suction channels. Suction and delivery flange. Holds the bearing housing with bearing assembly, shaft and impeller. Pump shaft (211) Holding the impeller, shaft seal, bearing assembly and coupling. Transmitting the drive energy to the impeller and thus, to the medium. Sturdily dimensioned drive shaft. Bearings Interface between stationary and rotating parts. Absorption of axial and radial forces. Impeller side: Two angular contact ball bearings (321.1) with steel cage. Drive side: One deep groove ball bearings (321.2) with steel cage. Shaft seal Depending on operating requirements, there is a choice of eight different shaft seals: Cartridge mechanical seal - single Cartridge mechanical seal - double Standard cartridge mechanical seal - single Standard cartridge mechanical seal double Single standard mechanical seal Tandem mechanical seal Stuffing box packing Dynamic shaft seal
mainly manufacture Paper Pulp Pumps and Spares Parts, such as ACP, S, CP, VP, FP etc paper pulp pumps and Spares Parts. Single-stage Centrifugal Pump Specification: Pump type: Horizontal Materials: Cast Iron, Duplex, Super Duplex, Stainless Steel Seal arrangement: Mechanical Seal, Double Seal Max temperature: 200 Celsius
Front Lining also called front insert, it s one of the important parts for the ACP80-250 Centrifugal Single-stage Pumps. Andritz parts and spares for the Andritz ACP series, are some of the most popular ranges of equivalent parts and spares. These pumps parts are particular popular with our customers in the paper industry.
S series Centrifugal Pump S100-350 pump front lining is made of 1.4460 material, and Tobee s S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc.
The Front Lining of Andritz ACP 300-400 Single-stage Centrifugal Pump is made by European standard or US standard.
manufactures Andritz alternative ACP, S, VP, FP, CP series Paper & Pulp Stock Pumps and Pumps Wearing Spares, all the pumps and spares parts are widely for Paper mills, Paper Pulp, Coal prep, Waste pulp, Paper stock, Paper making, Waste paper stock, Chemical slurries, Sugar refining, Recycled fiber preparation, Chemical industry, Food industry, Energy supply, Water supply, Waste water treatment, Alkali recovery, Sugar syrup, Molasses, Pharmaceuticals industry, Potash Fertilizer Plant, Other industries etc. Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps.
