Centrifugal Slurry Pump Impeller

pump impellers are interchangeable with AH/HH/LM pump impellers, The Impeller is one of the most important parts for slurry pump. Centrifugal slurry pumps need impeller to produce the centrifugal force which transfer the . The centrifugal force is produced by the impeller which rotates to a certain speed, As main rotating component which normally has vanes to impart the centrifugal force to the liquid, Usually, slurry pump impellers have a plain or a Francis type vane.

Product description
1.1 centrifugal slurry pump impeller:
Standard centrifugal slurry pump impeller is one of the most important spare parts pumps. When slurry pump impeller working, the slurry pump could meet the requirements of the equipment. However, it is a component, which is worn out very easily. Therefore, for long service life of the impeller, the material plays an important role here.
1.2 structure:
Centrifugal pump oem close impeller price
We choose the white iron, high chrome (27%) for the strong abrasive slurries with sharp particles. For the corrosive slurries with blunt particles, we recommend the natural rubber.
1.3 feature

Material: alloy metal, natural rubber slurry pump rubber impeller.
Life: long service life
Design: scientific design based on hydraulic theories
Production: strict manufacture procedures and specialized quality inspection personnel
Slurry pump spares
1.1 pumps spare and parts material :
High chrome alloy:a33, a05, a07, a49, etc.
Centrifugal pump oem close impeller price
Natural rubber: r08, r26, r33, r55, etc.
Other material as per requests, like stainless steel, duplex stainless steel, nickle alloy, alloy 20, and so on.

Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.

Design Features:

Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.

Ductile iron fully lined casing provides durability, strength, safety, and long service life.

Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.

Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs.

Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.

Designed for rugged duties while offering excellent efficiencies.

Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.

Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.

Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.

Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.

Mechanical seals reduce flush water usage, minimizing pump operating costs.

200SV-SP vertical spindle sump slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.

Mainly SP Metal Lined Vertical Sump Pump Parts:

Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel.
G refers to submerged depth 1200mm;
J refers to submerged depth 1500mm;
L refers to submerged depth 1800mm;
M refers to submerged depth 2000mm;
Q refers to submerged depth 2400mm;
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Upper Strainer - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. Lower Strainer - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.

Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc.

Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.

Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc.

Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.

The slurry pumps are widely used in industries, such as Ball mill discharge Rod mill discharge, Ni acid slurry, Coarse sand, Coarse tailings, Phosphoric matrix, lime grinding, Oil sands, Mineral sands , Firetailings,Minerals concentrate, Wastewater, Process chemical.

OGEM YZ Submersible slurry pump is centrifugal pump. It is usually used to pump drilling fluid with larger particle.
So it can be treated as shale shaker feeding pump. It is vertical type save much space. Furthermore, it also can be
decanter centrifuge feeding pump. YZ Submersible slurry pump impeller is semi opening type this provides high
efficiency. The impeller material is carbide alloy make pump more durable decrease maintenance cost. OGEM
Equipment is professional manufacturer on submersible slurry pump with high quality and economical cost.
Benefits
1.Request less space
2.High efficient and effect
3.Durable enough
4.Low maintenance cost
5.Better for transferring drilling fluid

Impeller for 8AHF Pump