Electric Submersible Sand Pump

Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.

Item name: dp-850 Outlet:8" Head: 15~ 30m Output: 50 hp Capacity: 480 m3/h (40% solid pumping) Solid passing: 60 mm Weight: 970 kg

INSTALLATIONS AND USE .For transporting clear water and the liquid which the physical and chemical property similar to water, and the temperature below 20ºC .For ground water supply to private houses,to waterworks and to irrigation systems .For water pressurization .For liquid transfer in tanks PERFORMANCE RANGE .Flow up to 100m³/h .Head up to 402m   OPERATION CONDITIONS .Liquid temperature up to +20ºC .Ambient temperature up to +20ºC .Continuous duty .Maximum sand content 0.25% .Minimum well diameter -4" for 4SP pumps -6" for 6SP pumps -8" for 8SP pumps -10'' for 10SP pumps    ELECTRIC MOTOR .Two-pole induction motor, 50HZ (n=2850rpm) .Single phase ,220-240V .With thermal protector incorporated into the winding .Available with the start control box or automatic control box .Three phase 380V/415V .Insulation Class F .Protection IP68 COMPONENT MATERIALS .External case Stainless steel AISI304 .Discharge head Stainless steel AISI304 .Diffuser Stainless steel AISI304 .Impeller Stainless steel AISI304 .Pump shaft Stainless steel AISI304 .Oil chamber Copper alloy   Main Features                                                                                                      1) Max head ranges from  20 m to 402 m . Max flow rate ranges from 2 m3/h to 100 m3/h with different size to be used in SP PUMP 2) 100% copper wire/ 304 stainless steel shaft  3) Advanced and smart controller 4) 100% testing system for motor/complete set pump/controller, each pump will be tested good before delivery. 5)Installation is simple and convenient, free maintenance 6)Overload protector.When the temperature of the motor is too high, more than the temperature of the Overload protector to protect the water pump will automatically jump out, prevent burning machine.   Pump Checking                                                                                                  EACH PUMP WILL BE TESTED GOOD BEFORE PUMP DELIVERY. Product Application Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Skysea people practice the spirit of craftsmen, pursue excellence, and insist on continuous innovation and improvement. The company from raw materials into the factory, parts processing to pump assembly testing out of the factory, all use advanced testing instruments, perfect technical means, standardized operation process, to ensure that each part, each product meets the technical requirements, thus ensuring the stable performance and reliable operation of the product.

Hydromanâ?¢ Hydraulic Submersible Sand Pump for River Dredging is a hydraulic machinery with mixing function,designed to utilize the performance of hydraulic motor to the utmost for the site where the electric power source canâ??t be supplied. Hydraulic sand pump is suitable for conveying media containing various particle sizes of solid particles such as sediment, cinder, tailings and ore sand. Submersible hydraulic sand pump is mainly used for dredging and dredging of metallurgy, mines, thermal power plants, iron and steel, water treatment, sand mining, mining, ports, rivers, lakes and ponds; The suction and transportation of sediment media such as port construction and Hydraulic Reclamation of rivers, seas and beaches are ideal substitutes for traditional mud pumps. The whole set of equipment can be flexibly matched with other equipment, such as hydraulic station, excavator and loader, so as to break the power restriction and transfer flexibly, especially for construction in remote areas.

Hydroman Submersible Sand Dredging Pump Description: Hydroman Submersible Sand Dredging Pumps are suitable to be used for pumping sand. Sand is pumped mixed with water up to 70% of solids by weight. The mixture of liquid and particles of sand and gravel is pumped in a procedure often used as a convenient way of handling sand and gravel. There are many applications for submersible sand pumps: sand and gravel extraction, dredging of rivers, harbors and marines maintenance or construction, beach reclamation, filling of Geotubes, among others. Here below you can read about some of the multiple applications of sand pumps.

Hydroman Submersible Sand Pump Description Hydroman Submersible Sand Pumps specifically designed for handling slurries with a high content of abrasive solids. The dredge pumps have been extremely successful for clients operating in specialized sectors who face severe conditions and solve very difficult applications. The electric dredge pumps are positioned as submersible dredge pumps for marine and energy sectors as well a in mining for minerals and other materials. Handling slurries with up to 70% solids content and specific gravity up to 1.7, with a capacity of up to 5,300 gpm at 275 feet of head.With high chrome wear parts and specially designed, grease packed lip seals, the dredge pumps are manufactured with exceptional structural quality to maximize the benefits of the customer's initial investment and achieve low maintenance and service costs.

Please confirm more details we will sent you price list. 1. what the water pumps head and water capacity? 2. Any request about the borehole diameter. 3. How about voltage and frequency 380V or 220V,50HZ or 60HZ? 4.Whatâ?²s the temperature of water? 5. What the material, cast iron or stainless steel? SkySeaParticipate in the formulation of national standards for submersible pumps. FAQ & Contact us: Q1: Are you manufacturer or a trading company? A: We are the best manufacturer in submersible pump with a history of 70 years in China. Q2: What are your payment terms? A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. Q3: Can you do OEM? A: Yes, we can. Any OEM is welcome. Q4: How about MOQ? A: Usually, it is 5 PCS for each model. Q5: How about the delivery time? A: Usually, 20-30 days after receiving your L/C order. Q6: How about the warranty? A: 1 year. Why Choose US? 1. Specializing in manufacturing submersible pump products for 70 years. 2. The motor and pump body are self-produced on the whole line. 3. Each product is tested by 136 processes and strictly controlled by quality. Product Description: Submersible water pump for deep well has perfect design and resonable structure which has low noise and long lifetime, small volum, no water pollution. Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Product Advantage: 1. High efficiency and energy saving; Save and environmental friendly. 2. Strong and durable, stable and reliable. 3. Easy to use and widely application. Working Conditions (1) Three-phase AC power supply of rated frequency at 50HZ and rated voltage at 380±5%V.(user voltage at 660V shall be otherwise specified) (2) Pump inlet shall be kept below the dynamic level by 1 meter, but the submerged depth shall not exceed 70 meters below the static level. And the lower part of motor shall be kept at least 1 meter to the bottom of the well. (3) Generally, water temperature shall not be higher than 30. (4) Water quality requirements: a. Sand content in water not greater than 0.01%( weight ration) b.PH value between 6.5~8.5 c. Chlorine ion content not greater than 400mg/l

Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump Model: 200QJ63-28/2 Flow: 63m3/h Head: 28m Power: 7.5kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/

Flow: 20m3/h Head: 91m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.