200SV-SP vertical spindle sump slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Mainly SP Metal Lined Vertical Sump Pump Parts:
Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel.
G refers to submerged depth 1200mm;
J refers to submerged depth 1500mm;
L refers to submerged depth 1800mm;
M refers to submerged depth 2000mm;
Q refers to submerged depth 2400mm;
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Upper Strainer - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. Lower Strainer - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application. Design Features: Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Ductile iron fully lined casing provides durability, strength, safety, and long service life. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs. Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life. Designed for rugged duties while offering excellent efficiencies. Minimal shaft/impeller overhang reduces shaft deflection and increases packing life. Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life. Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs. Mechanical seals reduce flush water usage, minimizing pump operating costs.
Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc. Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
Tobee 300 L series Mining Slurry Pump Wear Parts including Impeller RSL30147A05A, Frame Plate Liner Insert SL30041MA05, Volute Liner SL30110A05, Throat Bush SL30083MA05, Bearing Assembly FFRS005M, Stuffing Box RSL30078D21 and Shaft Sleeve RS076C21, etc. Tobee�® 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the heavy-duty slurry pump range, A key feature is the light-duty high-efficiency impeller, engineered with the latest hydraulic and wear technologies for high-efficiency and increased wear life. With a range of high quality parts and different material combinations, the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution for any given application.
can offer replacement KSB slurry pump impellers, the KWPK 65-315 impeller used on KSB KWP Non-clogging Centrifugal Pump, it is a closed non-blocking multi-vane impeller impeller. pumps are Horizontal, single-stage, radially split volute casing types with heavy-duty back pull-out, non clogging impeller design for industrial applications, they have either multi-vane impeller (K), free-flow impeller (F) or open multi-vane impeller (O), the pumps are not self-priming. K type impeller - Closed non-blocking impeller. It is suitable for transporting clean water, sewage, and solids-containing media. The medium should not contain solids that are particularly easy to adhere and easy to entangle (such as extra long fibers or coarse rubber particles).
pump impellers are interchangeable with AH/HH/LM pump impellers, The Impeller is one of the most important parts for slurry pump. Centrifugal slurry pumps need impeller to produce the centrifugal force which transfer the . The centrifugal force is produced by the impeller which rotates to a certain speed, As main rotating component which normally has vanes to impart the centrifugal force to the liquid, Usually, slurry pump impellers have a plain or a Francis type vane.
Impeller for 8AHF Pump
OEM Andritz ACP series pump spares Impeller ACP 150-400.5 semi-open type in a highly wear-resistant design.
SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available. Vertical Sump Slurry Pumps Spare Parts Design features: â?¢ Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require. â?¢ Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings. â?¢ Large Particle - Large particle impellers are also available and enable passing unusually large solids. â?¢ Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft. â?¢ Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures. â?¢ Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered. â?¢ Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. â?¢ Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
We can supply many spare parts of slurry pump. OEM pump part is welcome. Material options: -High Chrome alloy -Grey Iron -Cast Iron -Rubber -Polyurethane -OEM Pump Parts: Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive Rubber impeller is made of SR26,SR55, SR33 Polyurethane material is available. Brief introduction: -Spare parts in anti-abrasion high chrome cast iron alloy. -Largest weight of single workpiece can be 13t. -Largest outside diameter of workpiece can be 5m -Manufacture other mechanical parts according to your drawing. -
