10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:
Interface:
Left side:
One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)
Right side:
One rs-232 console port (rj-45 connector)
One power jack
Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:
Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125
Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
HTFuture dual fiber Fiber Media Converter (Electric To Optic Converter) is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet. The media converter is connected between Fiber cable and Twisted cable segments with network operating smoothly. The Ethernet transmission distance of 100 meters from copper extended to 2 km (multimode fiber) or 120 km (single mode fiber). Using sophisticated switching core, support hot-swappable, with flexible, efficient, reliable etc. It's widely used in Telecommunications, Broadcasting, Broadband networks, Million high-definition video surveillance ect where require high-performance, high-reliability network environment.
Features
1, 10M/100M Adaptive, full/half duplex automatically configure in TP port.
2, The Max transmission distance: Mulit-mode 2KM,Single mode 120KM.
3, Using sophisticated switching core and ?large capacity of cache.
4, Supports LFP(Link Fault Pass-Through), Broadcast storm protection, Balanced Traffic, Isolate conflicts and Detection error.
5, Compliant with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX,100Base-FX Standards.
6, High-quality laser device has good optical properties, electrical properties and temperature stability.
7, Science Circuit layout , anti-interference ability, can effectively prevent lightning.
8, Working status indicator is complete, which can easily manage devices.
9, External professional switching power supply, security and stability. Power consumption is less than 4W.
10, Built-in lightning protection circuit, greatly reduce the damage caused by lightning induction.
1.Introduction
10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
2.Features
In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX
Supported Ports: SC for optical fiber; RJ45 for twisted pair
Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
Auto MDI/MDIX supported without need of cable selection
Up to 6 LEDs for status indication of optical power port and UTP port
External and built-in DC power supplies provided 128 K's data buffer RAM
Support for low-delay time pure data transmission and full/half-duplex flow control.
Built-in watch-dog timer to monitor any error in internal data exchange
60278 Fiber Media Converter Suppliers
Short on time? Let Fiber Media Converter sellers contact you.
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported
Plug-and-Play installation
Support Jumbo frame (64-9216 Byte)
Support Voltage Monitor
Support full/half duplex auto-negotiation
Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port
Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T
LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX
Description:
10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM.
10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel.
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
10M/100M media converters and 1000M media converters
Products capability:
According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab
Support long data packet
Easily for setting and debugging
Technology specification:
Wavelength:1310nm and 1550nm
LAN port speed:10M/100M and 1000M
Transimission distance:20km 40km 60km 80km 120km
Features:
1. Complies with 802.3u 100Base-TX and 100Base-FX
2. Provides UTP-to Fiber media conversion
3. Extentds network span to 2Km(multimode) 120Km(single mode)
4. Auto-negotiation on 100Base TX TP port
5. nteroperable with 100Base TX/TX devices
6. Provides Power, Link, and Receive Status LED Display
7. Supports a variety of fiber optic connectors to satisfy the extended requirements of users
Applications:
10/100/1000Mbps Gigabit Optical Ethernet network with long-distance transmission
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter
SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.
Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback
Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0íµ - 50 íµ
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
Multi-mode: 50/125, 62.5/125 or 100/140ª8m
Single mode: 8.3/125, 8.7/125, 9/125 or 10/125ª8m
Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)
Lnk-277 series is an industrial grade rs-232 / rs-422/ rs-485 to fiber optic converter which converts a standard rs-232 / rs-422 / rs-485 transceiver to a fiber optic link as to extend the serial signal up to 2km on multimode fiber and 80km on single mode fiber. This unit is enclosed in an industrial wall mount compact size rugged steel case.
StandardEia /tia rs232, rs-422, rs-485
Fiber connectorSc standard, st/fc optional
Fiber distance50/125um mmf: 2km, 62.5/125um mmf: 5km, 9/125 smf:20/40/60/80km
Serial connectorRs-232: db9, rs-422, rs-485: phoenix terminal
Serial distanceRs232: 15 meters, rs-422, rs-485: 1500 meters
Rate0-120kbps
Baud rate300 baud to 115, 200 baud
Rs-232In, out, gnd
Rs-485D+, d-, gnd
Rs-422R+, r-, t+, t-, gnd
Power supplyDc2.5 5v(9v-48v)
Power rate2w
Static protection15kv electric static discharge (esd) protection
Surge protection1500w/sec surge protection
Operation temperature-25°c to +70°c
Storage temperature-40°c to +85°c
Storage humidity5%~90% non-condescending
Dimensions110(l)*104(w)*28(h) mm
Weight0.3kg/pcs
Standard packaging: carton packaging(support customer logo)
Short Description:
10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup usersâ?? needs, achieving high-speed remote interconnection for up to 100 kmâ??s relay-free computer data network.We can offer dual fiber multi-mode as well single fiber single-mode.
Application :
With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
Product Name:10/100/1000M Single fiber Media Converter
Type: Fiber optic media converter
Warranty Time:3 Years
link Port:SC Bidi Simplex Fiber Port
Transmisssion Diatance:20, 40, 80km
Power Supply:DC5V1A
Transfer Mode:Store and forward
Dimensions:95*73*28mm
N.W:0.3KG
Operating Temperature:0 C +70 C
Certification:CE FCC RoHS
Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply
Features
Supports auto MDI/MDIX crossover
1K MAC address can be storage, and automatic updated
Supports 10/100M, full/half duplex auto- negotiation
Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard
More than 50,000 hours MTBF
Supports over-sized packets up to 1600Bytes
Full duplex-flow control, Half duplex-back pressure
Link fault pass through function
Full-positioned LEDs to indicate power and network status
Same card on rack mounted and desktop
FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark
Throughput @ 100Base: 148,800 pps (64-byte packets)
Multimode or Singlemode; single fiber or dual fiber optional
Transmission distance is from 2KM up to 120KM
Network broadcast storm protection function
High quality optical modules and chips with working stability
Specification
Standard
IEEE802.3 (10BASE-T)
IEEE802.3u 100BASE-TX/FX (Fast-Ethernet)
IEEE802.3x (Flow Control)
IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Fiber Connector
SC standard, ST/FC/LCoptional
10/100BASE-T
STP or UTP Category 5/5e/6 cable (Max. 100m)
100BASE-FX
50/125um, 62.5/125um multimode fiber cable (2Km)
9/125um singlemode fiber cable (20/40/60/80/100/120Km)
Conversion Mode / Delay Time
Store-and-Forward < 10us, straight-through<0.9us
Flow control
Full duplex-flow control, Half duplex-back pressure
MTBF
50,000 hours
RJ-45 Port
Auto-MDI/MDIX
Technical Specifications
Operating standards: IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX/HX
MAC address table: 4K
Data Buffer: 256K
Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: LC,1000Mbps
Cable :
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m)
singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km)
Flow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
Power: AC 220V(170-260V) 50Hz; DC 5V£¬1A
Ambient temperature: 0 ¡« +50
Storage temperature: -20 ¡« +70
Humidity: 5% ¡« 90%
Dimensions:
Internal Power: 40 (high) x 110 (width) x 140 (length) mm
External Power: 26 (high) x 70 (width) x 93 (length) mm.
Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC addresses table: 1K
Data buffer: Built-in 128Kbyte RAM .
Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps
Cable:
UTP: Cat. 5 (the max distance up to 100m)
Fiber ( Multimode): 50/125, 62.5/125m, the max distance up to 2km or 5km
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125m, the max distance up to 20 -120km
Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power Requirement: AC 170 ¡« 240V, DC 5V.
Ambient Temperature: 0 ¡« 70
Humidity: 5 ¡« 90%
Dimensions: Internal power: 30, 110, 140mm
External power: 26, 70, 93mm.
ANYK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples,because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.
Main features
Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex;
UTP port supports MDI/MDI-X auto crossover;
Support link fault pass through function(LFP),with indicator function of link fault: When optical fiber or UTP is at fault, the converter could stop all the link;
Support far end fault function;
Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode;
Supporting 1600 bytes packet for management;
Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode;
Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction;
Internal or External switching power: for users to choose.
Technical Specifications
Operating standard: IEEE802.3u, 10/100Base-TX and 100Base-FX
Built in 128Kb RAM for data buffer;
Connector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps
Cable:
UTP: Cat. 5 UTP (the max distance up to100m)
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125ª¦m(the max distance up to 90km)
Flow control
Full Duplex:IEEE802.3x
Half Duplex:back pressure
LED: Power, FX Link/Act, FX SD(Signal Detect), TX 100, TX Link/Act, TX FDX.
Power : AC 220V(170-250V),50Hz; DC: 5V,1A
Ambient temperature:0 - +50íµ
Storage temperature:-20 - +70íµ
Humidity:5% - 90%
Dimensions:
Power external: 26 (high) x 70 (width) x 94 (length) mm
Power internal type: 30 (high) x 110 (width) x 140 (length) mm
60278 Fiber Media Converter Suppliers
Short on time? Let Fiber Media Converter sellers contact you.
