Fiber Media Converter

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type Specifications: Interface: Left side: One 10gbps rj-45 port One 10gbps sfp + port (mini-gbic) Right side: One rs-232 console port (rj-45 connector) One power jack Wire speed cable length: up to 100m cat6a cable for wire speed transmission Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r Temperature:

Product name: 10/100m fiber media converter Dual fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a

HTFuture dual fiber Fiber Media Converter (Electric To Optic Converter) is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet. The media converter is connected between Fiber cable and Twisted cable segments with network operating smoothly. The Ethernet transmission distance of 100 meters from copper extended to 2 km (multimode fiber) or 120 km (single mode fiber). Using sophisticated switching core, support hot-swappable, with flexible, efficient, reliable etc. It's widely used in Telecommunications, Broadcasting, Broadband networks, Million high-definition video surveillance ect where require high-performance, high-reliability network environment. Features 1, 10M/100M Adaptive, full/half duplex automatically configure in TP port. 2, The Max transmission distance: Mulit-mode 2KM,Single mode 120KM. 3, Using sophisticated switching core and ?large capacity of cache. 4, Supports LFP(Link Fault Pass-Through), Broadcast storm protection, Balanced Traffic, Isolate conflicts and Detection error. 5, Compliant with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX,100Base-FX Standards. 6, High-quality laser device has good optical properties, electrical properties and temperature stability. 7, Science Circuit layout , anti-interference ability, can effectively prevent lightning. 8, Working status indicator is complete, which can easily manage devices. 9, External professional switching power supply, security and stability. Power consumption is less than 4W. 10, Built-in lightning protection circuit, greatly reduce the damage caused by lightning induction.

1.Introduction 10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks. 2.Features In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX Supported Ports: SC for optical fiber; RJ45 for twisted pair Auto-adaptation rate and full/half-duplex mode supported at twisted pair port Auto MDI/MDIX supported without need of cable selection Up to 6 LEDs for status indication of optical power port and UTP port External and built-in DC power supplies provided 128 K's data buffer RAM Support for low-delay time pure data transmission and full/half-duplex flow control. Built-in watch-dog timer to monitor any error in internal data exchange

Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported Plug-and-Play installation Support Jumbo frame (64-9216 Byte) Support Voltage Monitor Support full/half duplex auto-negotiation Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX Description: 10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM. 10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. Export standard packaging

Product name: 10/100m fiber media converter Single fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Single fiber 1310/1550 wdm Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback

Fiber media converter.

Main features In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm Half duplex: back pressure flow control Full duplex: IEEE802.3x flow control Automatic identification of MDI/MDI-X cross line Technical parameter: Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard Connector: one UTPRJ-45 connector, one SC/ST connector Operation mode: full duplex mode or half duplex mode Power supply parameter: Adapter(External): 110-265V AC input, 5V1A DC output Power(Internal): 110-265V AC input, 5V1A DC output Environmental temperature: 0íµ - 50 íµ Relative humidity: 5%-90% TP cable: Cat5 UTP cable Transfer fiber: Multi-mode: 50/125, 62.5/125 or 100/140ª8m Single mode: 8.3/125, 8.7/125, 9/125 or 10/125ª8m Dimensions: Power external: 94mm(L)x 71mm(W) x 26mm(H) Power internal: 150mm(L) x 110mm(W)x 28mm(H)