10/100M Wdm Fiber Media Converter

Product name: 10/100m fiber media converter

Dual fiber

Product intro:

The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.

Main features:

Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.

With the function of automatic recovery to prevent system halt.

Indicate the working status.

Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.

Optional inside and outside power supply.

No adjust electrical and optical environment.

Led indicator light shows the working performance status.

Duplex mode:

Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.

Inserting to 14 slots rack with play and plug.

Led status indicator light makes easy diagnosing network and checking troubleshooting.

Good flow control and reset fuction prevent system halt.

Transmission distance:

Mm(multi mode): within 2 km

Sm(single mode):20km, 40km, 60km, 80km, .100km

Environment parameters:

Working temperature: 0íµí½65íµ

Storage temperature: -40íµí½+85íµ

Humidity: 5%í½90%

Other parameters:

Inside power supply dimesion: 160mm*110mm*30mm

Outside power supply dimesion: 110mm*70mm*30mm

Rated voltage: ac220v/50hz

Inside power supply: ac 220v/1a

Inside power supply: dc 5v/1a

HTFuture dual fiber Fiber Media Converter (Electric To Optic Converter) is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet. The media converter is connected between Fiber cable and Twisted cable segments with network operating smoothly. The Ethernet transmission distance of 100 meters from copper extended to 2 km (multimode fiber) or 120 km (single mode fiber). Using sophisticated switching core, support hot-swappable, with flexible, efficient, reliable etc. It's widely used in Telecommunications, Broadcasting, Broadband networks, Million high-definition video surveillance ect where require high-performance, high-reliability network environment.

Features
1, 10M/100M Adaptive, full/half duplex automatically configure in TP port.
2, The Max transmission distance: Mulit-mode 2KM,Single mode 120KM.
3, Using sophisticated switching core and ?large capacity of cache.
4, Supports LFP(Link Fault Pass-Through), Broadcast storm protection, Balanced Traffic, Isolate conflicts and Detection error.
5, Compliant with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX,100Base-FX Standards.
6, High-quality laser device has good optical properties, electrical properties and temperature stability.
7, Science Circuit layout , anti-interference ability, can effectively prevent lightning.
8, Working status indicator is complete, which can easily manage devices.
9, External professional switching power supply, security and stability. Power consumption is less than 4W.
10, Built-in lightning protection circuit, greatly reduce the damage caused by lightning induction.

1.Introduction
10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
2.Features
In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX
Supported Ports: SC for optical fiber; RJ45 for twisted pair
Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
Auto MDI/MDIX supported without need of cable selection
Up to 6 LEDs for status indication of optical power port and UTP port
External and built-in DC power supplies provided 128 K's data buffer RAM
Support for low-delay time pure data transmission and full/half-duplex flow control.
Built-in watch-dog timer to monitor any error in internal data exchange

Media Converter, 10/100M 1310nm SM 5km
Fiber optic media converter

Skype:wirenettehnology

Features :

Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets.

Surporting : The transmission of extra-long packes over VLAN

Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users.



Technical specifications

Parameter
Specifications

Access mode
10/100Mbps

Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree

Wavelength
850nm/1310nm/1550nm

Transmission distance
Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km

Category-5 twisted pair: 100m

Port
One RJ45 connector, connected to STP/UTP category-5 twisted pair

One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125¦m)

Single mode - SC/FC fiber port (fiber size: 9/125¦m)

Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125¦m)

Conversion mode
Medium conversion, storing and forwarding

MAC address table
I K

Buffer space
1Mbit

Flow control
Full duplex state: flow control; half duplex state: back pressure mode

Delay
9.6us

Bit error rate
<1/1000000000

MTBF
100,000 hours

LED
Power TX link ( fiber link action ), TP LINK1000, TP LINK100, TP ACT )

FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M)

TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action)

TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M)

Power
AC220 0.5A/PC-48(builtin)

Power consumption
5W

Operating temperature
-10~55¦C

Operating humidity
5%~90%

Storage temperature
-40~70¦C

Storage humidity
5%~90% (non-condensing)

Dimensions
140mm * 111 * 30mm(in) 95 + 70 + 26mm(out)








140mm x111 x 30mm(in) 95 x 70 x26mm(out) , 0.5KG/pc

Media converter desktop 1 u
10/100/1000mbps sc/fc single mode/multi-mode 1/2 core
2~120km ac/dc internal/external power



Standard export carton packing

ANYK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples,because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.
Main features

Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex;
UTP port supports MDI/MDI-X auto crossover;
Support link fault pass through function(LFP),with indicator function of link fault: When optical fiber or UTP is at fault, the converter could stop all the link;
Support far end fault function;
Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode;
Supporting 1600 bytes packet for management;
Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode;
Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction;
Internal or External switching power: for users to choose.
Technical Specifications
Operating standard: IEEE802.3u, 10/100Base-TX and 100Base-FX
Built in 128Kb RAM for data buffer;
Connector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps
Cable:
UTP: Cat. 5 UTP (the max distance up to100m)
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125ª¦m(the max distance up to 90km)
Flow control
Full Duplex:IEEE802.3x
Half Duplex:back pressure
LED: Power, FX Link/Act, FX SD(Signal Detect), TX 100, TX Link/Act, TX FDX.
Power : AC 220V(170-250V),50Hz; DC: 5V,1A
Ambient temperature:0 - +50íµ
Storage temperature:-20 - +70íµ
Humidity:5% - 90%
Dimensions:
Power external: 26 (high) x 70 (width) x 94 (length) mm
Power internal type: 30 (high) x 110 (width) x 140 (length) mm

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:

Interface:

Left side:

One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)

Right side:

One rs-232 console port (rj-45 connector)
One power jack

Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:

Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125

Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)