10/100M Ethernet Fiber Media Converters

Technical Specifications Operating standards: IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX/HX MAC address table: 4K Data Buffer: 256K Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: LC,1000Mbps Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m) singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km) Flow control Full Duplex: IEEE802.3x Half Duplex: back pressure. Power: AC 220V(170-260V) 50Hz; DC 5V£¬1A Ambient temperature: 0 ¡« +50 Storage temperature: -20 ¡« +70 Humidity: 5% ¡« 90% Dimensions: Internal Power: 40 (high) x 110 (width) x 140 (length) mm External Power: 26 (high) x 70 (width) x 93 (length) mm.

Supplier: Textile products, colour dyes, handloom products, cotton yarns, fabrics, agro chemicals, organic chemicals, inorganic chemicals, pesticides, plastic household products, plastic polymers, fibers raw materials, fibers products, engineering products, mineral & metallurgy products, electronic products, consumer electronics products, cereals, halal products, dairy products, stationary products, beauty and cosmetics products, furniture, gardening tools, tiles & sanitaryware, flavour and fragrances, construction products, kraft paper rolls, grocery items, kitchen utensils, pipes & fittings, paper and pulps products, spices, empty glass bottles, stainless steel products, hardware products, and many more.

Fiber Optic media converter can transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometers or hundred kilometers. Using media converter is a economical solution to achieve long distance transmission base on current status. SC,FC,ST fiber ports available. Expand aple poly ephylene, carton.

SPC-10/100/1000M Series Media Converter can be used in the telecommunication IP MAN broadband optical network solution for its steady performance and powerful function.It convert 1000bps Ethernet copper port to optical port,up to 80km distandce on single-mode fiber without any relay device.It support auto-sending 10/100/1000Mbp half/full duplex topology,and MDI/MDI-X auto recognize. Selectable SC, FC, ST optical port makes the networks more flexible and feasible for the possibility of cost reduction. Package: carton Size:22X16X8cm.

OFS Gigabit Single Fiber Converter can convert Optical£­Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 90km through single optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. It must be used in couples because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters. Main features The transmission of a channel signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber. Auto negotiation function allows UTP port to auto select 10/100/1000M and Full Duplex or Half Duplex The UTP port supports MDI / MDI-X auto crossover. Supporting the max 1536 bytes packets Adopting internal power supply to insure equipment at long-hours work stably. Technical Specifications Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX MAC address table: 4K Data Buffer: 256K Connector: UTP: RJ-45,10/100/1000Mbps Fiber: SC,1000Mbps. Cable : UTP: Cat.5e or Cat.6 (the max distance up to 100m) Fiber (singlemode): 8.3/125, 8.7/125, 9/125, 10/125µm (the max distance up to 90km) Flow control: Full Duplex: IEEE802.3x Half Duplex: back pressure Power: AC. 220V(170-260V) 50Hz; DC. 5V 2A Ambient temperature:0 ¡« +50 Storage temperature:-20 ¡« +70 Humidity:5% ¡« 90% Dimensions:40 (high) x 110(width) x 140 (length) mm.

Technical Specifications Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX MAC address table: 4K Data Buffer: 256K Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m) singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km) Flow control Full Duplex: IEEE802.3x Half Duplex: back pressure. Power: AC 220V(170-260V) 50Hz; DC 5V2A Ambient temperature: 0 ¡« +50 Storage temperature: -20 ¡« +70 Humidity: 5% ¡« 90% Dimensions: 40 (high) x 110 (width) x 140 (length) mm .

14 Slots Media Converters Rack It is acceptable for the most 14 sets of 10M, 10/100M 10/1001000MMedia Converters within a rack-mountable chassis which is supplied with unified power. Installing at the center of network, the Rack not only reduce the links, simplify the structure, but also ease for management and maintenance. Main features: The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK. Supplying the Converters or Powers to be plugged and played. It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance 2U high: 19-inch standard design Technical Specifications: Capacity : 14 slots available Power: Input: AC 100 ¡« 260V, 50¡«60HZ Output: DC +5V 12A Power protection: protection from over voltage, over current and short circuit Working temperature: 0¡«50 Storage temperature: -20¡«70 Relative Humidity: 5%¡«95% Dimensions: 485 (wide), 245 (length), 90 (high) mm.

Idm ch-480net Brief introduction Idm ch-480net pdh multiplexer transmits 16 e1 and two 100mbps ethernet networks over one or two fiber channels. The optical interface supports simple als function, code of e1 interface is hdb3 which meets all the international standards. It also has perfect monitoring and alarm function, high degree of integration, low power consumption and stable performance. Both desktop type and integrated type are available. 220vac/-48vdc power supply alternative. It can be widely used in the mobile base stations, remote module of the switch and ddn private network and etc. Features 1.Provide standard 16e1 transmission and two 100m ethernet. 2.Ethernet ports support vlan and flow control. 3.155mbps speed rate of the optical interface and transmission distance more than 50km. 4.Support e1 loopback of cot (central office terminal) and rt (remote terminal), easy to test and manage. 5.Optical interfaces with 1+1 channel protection.(either one fails, the other will back it up) 6.Nms interface optional (rs232/ethernet). Specifications Power supply 220vac/-48vdc Consumption: 40w¦10% Optical interface Rate 155mbps¦50ppm Wavelength 1310nm/1550nm Physical connector Fc/sc Sensitivity Better than -36dbm E1 interface Channels 16 Rate 2.048mbps¦50ppm Comply with Itu-t g.703 Code Hdb3 Impedance 75 unbalanced and 120 balanced Ethernet interface Rate 100mbps, 10m/100m auto-negotiation Comply with Ieee802.3, 10/100base-tx Duplex Full/half auto-negotiation Operating environment Temperature: 0¦c~40¦c Humidity: 90% (non- coagulation) Dimensions 440mm+230mm+45mm (width + depth + height)