VPSA Oxygen station 1. Compenents of VPSA Oxygen station 1.1 Air Fan and Vacuum Pump Air fan provide air source for the whole system. Based on VPSA oxygen generator design condition and customer requirements, fan with proper outlet air pressure is to be provided. Vacuum pump ensures correct system operation and keeps the system in ideal vacuum state, which ensures equipment constantly adsorb nitrogen and produce oxygen. 1.2 Temperature Regulating System Air temperature regulating system is made up of a water cooler and an electric heater. The temperature of air compressed by fan is around 65oC-70oC, passing the water cooler, its temperature is reduced to meet the requirements of process operation. Then it is sent into the adsorption towers. In winter, the temperature of air is to be increased by the electric heater and reaches the requirements of process operation. 1.3 Adsorption System The adsorption system mainly consists of two towers filled with zeolite molecular sieve adsorbents and piping valves etc. Air enters into the bottom of one tower, when passing through the adsorbent layer,N2, Coxygen, Vapor are adsorbed by molecular sieve and oxygen passes through the adsorbents and gathers at the top of tower, flowing out as produced gas, meanwhile the other tower is in the process of regeneration. When the adsorbing tower almost reaches saturation, by the operation of control system, the processing air flows into the regenerated tower and begins to produce oxygen.Two towers alternately adsorb and constantly produce oxygen . 1.4 Oxygen Buffer Tank Compared with three-tower process, oxygen generator with two towers can not produce consecutive oxygen, therefore, a buffer tank with large volume is needed for stable oxygen output. 1.5 Control System 1.5.1 System process is achieved by DOS control system. In this system, valves switches are independently controlled by PLC (Programmable Logic Controller). Analog signals of test sensors communicate with the main control system through specific communication protocols. Relevant data of specific unit can be sent to main control system and remote control signals of main control system can be accepted by specific unit. 1.5.2 In order to ensure safe oxygen supply, functions of interlink, protection, alarm, print, record etc can be provided. 1.5.3 The output variation of oxygen supply can be adjusted by DCS control system. System operating parameters can be adjusted to save energy. 1.5.4 The main control system adopts industry computer, provided with specific software and convenient human-machine touching screen, Start/stop and operating parameter collection can be realized on control panel. Remote monitor and print of running status record can be easily achieved.
Cryogenic Air Separation Plant 1. Model: KDN-100 2. MOQ:1 set 3. Warranty:1 year 4. Delivery:5-7 months
Pursuing perfection of technology-supported products – Based on technical professionals and high-tech facillities, westrive to develop products and create new technogoles, and we also pursue perfect quality control and customer-oriented business. Strong structure and powerfull durability – Suntech’s generator miniizes the vibration and the noise of the engine. It not worn out and the consume grease so it has excelent durability. In case there is any proublem with the system, it itself diagnoses. Bed frame – FEM technique, fule tank built-in, One body structure, mounting hall. Features – Simple operation, Easy installation, low operations cost, auto stop protection, prompt, delivery, Compact structure for reduse for instllation place. -
Digital tension meter T2 Series tension meter Detailed Product Description: T2 Series Digital Tension meter are for accurately measuring the running line tensions on a wide variety of yarns,fibers and copper wires. Features: Easy to read: 128*64 LCD display panel,clear display with high brightness backlight. Clean Streamlined handle design ,easy handing. Trigger-operated roller shifting mechanism,easy to acquire the running material. Simple and user friendly fuctional buttons for easy operation. Direct display of real time measurement,with present maximum and minimum values displayed simultaneously. Powered by replaceable lithium battery. With memory back up function. Display unit selectable (gram/CN) Accuracy +/-1% R.C Power: Lithium Battery 6V/750m AH
Engine : Cummins - Mitsubishi - Perkins Alternator : Stamford - MeccAlte - Mitsubishi Control System : P 732 control system Water cooled diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack and cables Engine coolant heater Steel base frame and anti-vibration isolators Spare external fuel tank (open set) Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust silencer and steel bellows supplied separately Static battery charger Manual for application and installation Generators Sets’ voltage and frequency regulation comply with ISO 8528-5 Generators Sets’ can take 100% load at one step according to NFPA110 ISO8528 This generator set has been designed to meet ISO 8528 regulation. SZUTEST This generator set is manufactured in facilities certified to ISO 9001. This generator set is available with CE certification. 2000/14/EC Enclosed product is tested according to EU noise legislation 2000/14/EC Please Ask For Price
4 Input Channel PV Array Combiner Box for Controller System Description PV combiner box is used to bring together the output DC current of the PV array. It will combine the same solar panels which in series to form a PV Array ,supporting the use of photovoltaic grid-connected inverter, so as to constitute a complete photovoltaic system, with the city electric grid. Summarize BPVB series PV Array Combiner For a large-scale grid-connected PV system, it is a general practice to install a DC combining device in between the PV modules and inverters for the sake of minimizing the cable distance between them, facilitating maintenance and improving reliability. With many years of PV grid-connected system design experience, our BPVB PV array combiner box series is specially-designed for meeting the need of high performance and high reliability of PV systems. In combining with our Solar Access inverters, Bangzhao BPVB provides a turnkey solution for PV power plant systems. By using PV array combiner box, according to the input voltage of the inverter, Clients can connect a fixed number of similar PV modules to form a PV array. Then different strings of PV array can be converged into the PV array string box. After that, together with lightning arresters and circuit breakers, it is connecting to the inverter to reduce the system installation time and increase the system safety. Features of PV array combiner box: * Applicable for outdoor PV systems * Each PV array attached to DC fuse protection and anti-reverse protection optional * Wide DC voltage input range with maximum open-circuit voltage up to 1000V * High voltage lightning protection (SPD) special for PV * PG Cable glands connector input, convenient and safe system wiring * PV special high voltage circuit breaker control output * Output Waterproof terminals
For further details, please, contact us by e-mail. For further details, please, contact us by e-mail.
Capacity: 1-1000 Nm3/hr Purity: 99.5% Outlet pressure:0.2 - 0.4 bar Crygenic oxygen plant -
LED power supply, 12V DC - 6W DC plug, 5.5 * 2.1 for LED strip, 12V Specifications: Input:100-240V AC/50-60Hz Output:12V 500mA, 6W Color: black/white DC: 5.5*2.1/5.5*2.5cm Length of cable: 1000mm Weight: 250g Certificate: CE, RoHS, FCC, CCC, EMC Warranty: 1 year Descriptions: A stable adapter (also known as a transformer or power supply) for LED strips up to 24 watts. The power adapter is equipped with a robust plastic housing.
Description: High quality switching AC to DC 12V 5A Notebook power supply. These are switch mode notebook power supplies which mean the output is regulated to 12V DC. They take 100-240V AC, 1.6 A, 50/60Hz input and supply 12V DC 5A output. These power supply is great for projects that require up to 5A of current. Center-Positive 5.5x2.5mm barrel connector. Three-pronged Power Cord is provided with the Power Supply. These will convert international voltage (100V-240Vac 50/60Hz) automatically; no transformer needed. Great for many electronic projects that require higher output currents up to 5Amps! There is also an LED indicator light. 3 Notes when using wall adapter: 1) Voltage and current (12V, 5A) 2) Plug size (2.5mm) 3) Center polarity (positive center) Certificates: CE, RoHS, FCC, CCC,EMC
Description: LCD Monitor AC/DC Adapter Power Supply is 18V 2A output power. Good quality will promise all our clients a happy dealing. Win-win style is our main target. Specification: Input power: 100-240V AC/ 50-60HZ Output :18V 2A 36W DC Power cord : customized DC: 5.5*2.1cm/5.5*2.5mm Length of dc cable: customized AC: Customized(Standard:1200mm) Certificate: CE ROHS FCC CCC EMC
Automatic lighting surge generator (or lighting surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gb/t17626.5 standards. Specifications: Product modelSg61000-5Sg61000-5tSg61000-5h12Sg61000-5h Output voltage (open)1.2/50µs±20%1.2/50µs±20%1.2/50µs±20%1.2/50µs±20% Output current (short)8/20µs±20%8/20µs±20%8/20µs±20%8/20µs±20% Output impedance2o2o2o and 500o2o and 500o Output voltage range0~6kv±10%0~6kv±10%0~12kv±10%0~10kv±10% Output current range0~3ka±10%0~3ka±10%0~6ka±10%0~5ka±10% Surge repetition1~9999 times1~9999 times1~9999 times1~9999 times Interval time20~9999s20~9999s20~9999s20~9999s PolarityPositive, negative or positive/negative automatic Phase shiftAsynchronous, synchronization 0°~ 360° or specific angle Coupling/decoupling network (cdn)Includes a 16a single phase cdnIncludes a 20a 3phases cdnIncludes a 30a 3phases cdnBuilt-in 20a 3phases cdn Dimensions (wxdxh)44x45x35cm44x45x55cm56x69x165cm56x69x155cm Gross weightAbout 30kgAbout 48kgAbout 300kgAbout 270kg Touch screen with super big lcd and built-in windows ce
Wood moisture meterMd812Testing probe2 pcs testing probes DisplayLcdBattery typeOne 9v alkaline battery Testing range5%~40% rhProduct dimension129*63*32mm Operation temperature0c~40c / 0~70%rhUnit weight116g with battery Accuracy¡¨¤1%Moq100 pcs Resolution1%Carton size47*33*31mm / 50pcs Battery consumptionNot over7.5maGw/nw11 kgs / 8 kgs Data holdHavePackageWhite box ApprovalCeH.S. Code90258000 Digital large size lcd display Test range: 5%~40% Accuracy: 1% Date hold and can hold value Battery: one 9v battery Low power indicating and can select in 2pins sensor Can change the testing sensor pins Conveniently dispense with the plastic. Dimension: 130lx64wx32h(mm) Plastic case
Features: 1 Low cost 2 High accuracy, better than ¡¨¤1% 3 NIST standard 4 Noninvasive. No pipe disturbance. No moving parts. No pressure drop. No maintenance 5 Easy and economical installation. No pipe cutting, no tole drilling 6 Wide measurement range, 0.03~105ft/s(0.01~32m/s) 7 Wide pipe size range, 1/2"~240"(DN15~DN6000mm) 8 Suitable for all commonly used pipe materials 9 Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material 10 Velocity, volumetric and totalized flow 11 Easy to use and set up. Self-explanatory menu-driving programming 12 Rich input and output functionalities 13 Weather-resistant enclosure 14 Ideal for both clean and opaque liquid flow measurements about 7KG/set
Standard single-chamber Range: 1~20ft(6.1m)~40ft(12m) Process pressure: up to 2000PSIG(13.8Mpa) Protection grade: IP 68 wooden casecarton or according to customer's requirement
Measurement Ultrasonic non-contacting Measurement Range 0.00m /h~200,000.00m /h Accuracy 0.2% of F.S Resolution 1mm Damping Rate 0.1m/min ~ 100m/min adjustable Data Logging Period Maximum 672 days (1hr interval) Output Display Illuminated Graphic LCD IP Rating IP65 Fuse: 250V T1.0A Range 0.3~4m (0.98~13ft) Process Connection 1¡± PF Weight ca. 1.0kg Material PVDF . IP Rating IP68 Cable 2 Core Shield (AWG18
Measurement Ultrasonic non-contacting Accuracy 0.2% of F.S Resolution 1mm Damping Rate 0.1m/min - 100m/min adjustable Output Display Illuminated Graphic LCD IP Rating IP65 Material Polycarbonate Dimension 166(W)¡¿250(H)x95(D) mm Weight ca. 2kg Range LXD-10: 0.3~ 5m (0.98- 16.4ft) LXD-10: 0.3~10m (0.98- 32.8ft) LXD-15: 0.3~15m (0.98- 49.2ft) Process Connection 1¡± PF Weight 1.5kg - 2.0kg Material PP, PVDF Temperature Compensation by a built-in temperature sensor IP Rating IP68 Cable 2 Core Shield (AWG18) Cable Extension up to 450m (1,476ft)
Rent Harbour Tug Boat, Azimuth Stern Drive Hight Horse Power Engine..
Lubricants, electrical generating stations, and electrical generators..Ex works
Generators, pellets.
