Measurement Ultrasonic non-contacting Accuracy 0.2% of F.S Resolution 1mm Damping Rate 0.1m/min - 100m/min adjustable Output Display Illuminated Graphic LCD IP Rating IP65 Material Polycarbonate Dimension 166(W)¡¿250(H)x95(D) mm Weight ca. 2kg Range LXD-10: 0.3~ 5m (0.98- 16.4ft) LXD-10: 0.3~10m (0.98- 32.8ft) LXD-15: 0.3~15m (0.98- 49.2ft) Process Connection 1¡± PF Weight 1.5kg - 2.0kg Material PP, PVDF Temperature Compensation by a built-in temperature sensor IP Rating IP68 Cable 2 Core Shield (AWG18) Cable Extension up to 450m (1,476ft)
Measurement Ultrasonic non-contacting Measurement Range 0.00m /h~200,000.00m /h Accuracy 0.2% of F.S Resolution 1mm Damping Rate 0.1m/min ~ 100m/min adjustable Data Logging Period Maximum 672 days (1hr interval) Output Display Illuminated Graphic LCD IP Rating IP65 Fuse: 250V T1.0A Range 0.3~4m (0.98~13ft) Process Connection 1¡± PF Weight ca. 1.0kg Material PVDF . IP Rating IP68 Cable 2 Core Shield (AWG18
The CF300 series ultrasonic open channel flow meter, together with measuring weir flume, is used to measure water flow in open channel. It is mainly used to measure the flow of sewage plant, sewage discharge outlet of enterprises and public institutions, urban sewers, as well as the channels for irrigation and water conservancy. As for the meters produced by CMCRI, the non-contact method is used for measurement by letting ultrasonic wave passing through air. Therefore, they are more reliable and durable in dirty and corrosive solutions compared with the contact-type meters.
An ultrasonic flow meter is a type of flow meter that measures the velocity of a fluid with ultrasound to calculate volume flow. Using ultrasonic transducers, the flow meter can measure the average velocity along the path of an emitted beam of ultrasound, by averaging the difference in measured transit time between the pulses of ultrasound propagating into and against the direction of the flow or by measuring the frequency shift from the Doppler effect. Ultrasonic flow meters are affected by the acoustic pr
Product overview Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection. Technical parameters Category Performance, parameters Host Principle Ultrasonic time difference principle Accuracy ±1% Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French. Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms) Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC. Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined. Pipe inner diameter 15~6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter) Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves. Temperature -30�ºC~160�ºC Turbidity 10000ppm and small bubble content Flow rate 0~�±10m/s Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C Humidity Host:85%RH Sensor protection level IP67 Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time. Different measurement can be achieved by using the AC90~260V power adapter. Power consumption 1W Shell material Flame retardant ABS Host weight 390g
Product overview Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection. Technical parameters Category Performance, parameters Host Principle Ultrasonic time difference principle Accuracy ±1% Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French. Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms) Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC. Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined. Pipe inner diameter 15~6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter) Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves. Temperature -30C~160C Turbidity 10000ppm and small bubble content Flow rate 0~±10m/s Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C Humidity Host:85%RH Sensor protection level IP67 Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time. Different measurement can be achieved by using the AC90~260V power adapter. Power consumption 1W Shell material Flame retardant ABS Host weight 390g
Ultrasonic flow meter Ultrasonic flow meter has high accuracy , better reliable , high quality and low price .It widely used in measuring water , sea water , sewage and revelation examination, maintenance , papermaking , petroleum and chemical industry .It has five main types , hand-held ultrasonic flow meter , wall-mounted , portable ultrasonic flow meter , pannel-mount and flameproof flow meter .The transducers include the clamp-on , insert transducer , pipe style transducer . The advanced circuit design , the integration of the latest semiconductors , the user-friendly software interface both in english and chinese languages and small íºcsized pcd board , all these features combine to make the tr-100 series ultrasonic flow meter the best and the biggest seller on the chinese market .And it will gain more and more recognition on the international flow meter market .
GMF200 Series Ultrasonic Flowmeter Model GMF200-D Principle Ultrasonic time difference principle Precision ±1% Display 4x8 Chinese or 4x16 Western dot matrix backlit LCD, supporting Chinese, English, Italian and French languages Output 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms) Data interface Isolating the RS-232 application interface, the flow meter can be upgraded through a PC Pipe Steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, and other dense pipes, allowing lining Pipe inner diameter 15-6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter) Medium Water, sea water, sewage, acid and alkali, alcohol, beer, various oils, etc. Fluid temperature -30~+160�°C Turbidity 1000pmm bubble content is small Flow rate 0±10m/s Working environment Host: -20 ~ +60 C; flow sensor: -30 ~ +160 C Host: 85% RH; sensor protection grade: IP67 Power supply 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time. Power consumption 1W Housing material Flame retardant ABS Host weight 390g
Features: 1 Low cost 2 High accuracy, better than ¡¨¤1% 3 NIST standard 4 Noninvasive. No pipe disturbance. No moving parts. No pressure drop. No maintenance 5 Easy and economical installation. No pipe cutting, no tole drilling 6 Wide measurement range, 0.03~105ft/s(0.01~32m/s) 7 Wide pipe size range, 1/2"~240"(DN15~DN6000mm) 8 Suitable for all commonly used pipe materials 9 Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material 10 Velocity, volumetric and totalized flow 11 Easy to use and set up. Self-explanatory menu-driving programming 12 Rich input and output functionalities 13 Weather-resistant enclosure 14 Ideal for both clean and opaque liquid flow measurements about 7KG/set
