Fine-grinding Hammer Mill Machine
A fine grind hammermill is a specialized piece of equipment used in the production of animal feed, specifically for grinding raw materials in poultry and livestock feed, aqua feed, and pet food production.
Description
The fine grind hammermillo perates by using a series of rotating hammers or knives to impact and shatter the raw materials into smaller particles. The smaller particles are then able to pass through a screen or mesh, separating them from larger particles that remain in the mill for further grinding.
One of the key advantages of a fine grind hammermillis its ability to achieve consistent particle size distribution, which is important for ensuring uniform feed production. This is especially important in animal feed production, as the nutrition and digestibility of the feed can be affected by variations in particle size.
In addition to achieving consistent particle size distribution, a fine grind hammermill can also help to improve feed efficiency by increasing the surface area of the raw materials, allowing for better nutrient absorption in the animal's digestive system.
Fine-grinding hammer mill is an essential piece of equipment for anyone involved in the production of animal feed, aqua feed, or pet food. With its ability to achieve consistent particle size distribution and improve feed efficiency, it is a reliable and effective tool for optimizing the nutritional value of animal feeds.
Relieving cutter
Behind it with shovel cutting (or shovel grinding) method processing Archimedes spiral tooth back, milling cutter with blunt only after heavy grinding front, can maintain the original tooth shape unchanged, used for manufacturing gear milling cutter and other forms of milling cutter
Heavy duty, continuous type ball mill is with three compartment and screen. Replaceable Liners are fixed inside entire mill. Liners material and shape is selected based on material to be grind. Input material is fed in two primary grinding compartments. Large diameter balls for reduce particle size are laying inside first compartment. Material comes into second compartment for further grinding. Small size Balls are laying inside second compartment. Material comes into third for fine grinding. Smaller size media are laying inside third compartment for fine grinding. Diaphragms may place to regulate material level and control retention time. Material is feed and discharged through hollow trunnion at opposite end.
The split set is widely used in coal mining. It is a new type of full-length anchor, and the three-dimensional part is a high-strength steel rod with a longitudinal slit. When installed in a hole slightly smaller than the pipe diameter, it can immediately apply radial pressure on the hole wall and the friction force to prevent the slide of the surrounding rock, plus the supporting force of the bolt tray, so that the surrounding rock is in a three-way stress state, and the rock stability is realized.
Advantage:
1. Good support effect.
2. Low support cost.
3. Low labor intensity.
Product parameters
Split set is mainly composed of anchor rod and tray.
The anchor rod has two wall thicknesses, 2.5mm and 3.0mm.
There are two types of trays, one with earhook and one without.
Common specifications: �?30, �?35, �?39, �?43, �?46.
For more product specifications, Please email us or visit our website.
Kelleg's advantage
1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services.
2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service.
3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.
25480 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
1.The screen is composed of screen box, vibrator, spring damping device supporting under frame and others, as shown in fig.1, the screen box uses the advanced ring groove rivet for connection and is of fram structure.The vibrator adopts eccentric shaft and eccentric block and the spring damping device uses steel spiral spring.
2.Use ya drum vibrating screen is primarily applied in coal, metallurgical power generation building material, water conservancy, light and chemical industries and other industries and a highly efficient screening machine to classify coal, ore, coke and other bulk materials
3.Working philosophy and structure property.The screen is operated by electric motor to drive vibrator with eccentric mass via delta belt, allowing screen box to vibrate, with the motional orbit of the screen box being circular.
1.Spiral chute is to make seperations of useful minerals from gangues by use of the different particles to gravity hydraulic pressure and friction in the multi-force field through dynamic contrifugal flowing membrane of slurry produced on the inclined surface of spiral based on the differences of useful mineral and gangue in specific gravity,particle size and shape.
2. Spiral chute (glass fiber reinforced plastics spiral chute) is applicable to metal and non-metal ores with adequate density difference, like iron, chromite, pyrite, tin ore, tungsten, tantalum, niobium, gold ore, colliery, monazite, rutile and Zirconium.
features
1) Roller crusher has the features of simple structure, and takes up smaller space, and the operation and maintenance of this machine is very convenient.
2) Roller crusher is equipped with safety protection device.
3) The operational cost is low, stable operation, high efficiency, saving energy, high crushing efficiency.
4) There is equipped dust-proof plant inside the machine and the sealing ability is excellent, so that there is little powder dust and lower working noises, so that the working environment is greatly improved.
5) The gap of the roll can be adjusted according to the requirement of the customers.
Applications
Roll crusher applies to crushing medium hardness materials such as coke, sinter, limestone,various metal ore and nonmetal ore.It is most suitable for medium and fine crushing in small and medium-sized nonmetal mines and chemical industry.The minimum size can reach 100 mesh.
Underground coal mining machine accessories / scraper
(1) scraper conveyor link or conveyor link for continous miner
(2) crawler chain for continous miner
(3) flight bar for longwall machine.
Crawler moving crusher, crushing station for waste recycling
Introduction Overview of Crawler moving crusher, crushing station for waste recycling
Crawler moving crusher, crushing station for waste recycling is a high-efficiency crushing equipment, using self-driven mode, advanced technology and complete functions. In any terrain conditions, this equipment can reach the workplace at any location. By means of a wireless remote control, the crusher can be easily moved to the trailer and transported to the workplace. Since no assembly time is required, the equipment can be put into operation immediately.
Application of Crawler moving crusher, crushing station ilings.
2.Industries:mines, coal mines, garbage and construction waste recycling, earthwork, city infrastructure,road,building works and other site operation.
Advantages of Crawler mo ving crusher, cru shing stati on for waste recycling
1.Light weight, sm
2.Convenient transp
3.Set machine, electricity, liquid integration of the typical multi-functional construction machinery products.
4.The whole machine adopts all wheel drive, can realize in situ steering, with perfect safety protection function.
5.Using double layer structure, without support, can stand freely.
6.Fuel saving rate of up to 25%, both in line with environmental needs and cost savings.
We offer a complete line of single & double and triple tube core barrels, which willl provide superior performance and obtain the full recovery of the sample in any application of diamond core drilling.
Using a wireline system, core is recovered quickly by retrieving the inner tube directly through the drill string. The rods remin in the hole until the bit needs to be replaced. This has big cost advantages when drilling deep holes for mineral exploration.
The core barrel assembly is composed of the inner-tube group and outer-tube group.
Advantages:
1.Faster coring at greater depths
2.Good stability due to constant diameter of the drill string
1).Size: 2'', 3'', 4''
2).Working pressure:6000-20000psi(42mpa-140mpa)
3).Working temperature: -29â°c~121â°c.
4).Application enrvironment: standard or h2s
5).Standard: api standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
MOBILE CRUSHING & SCREENING PLANT
SUITABLE FOR PROCESSING OF GRANITE, BASALT, DOLOMITE etc.
150 tph capacity
FEEDER : 20 m3
PRIMARY JAW CRUSHER : 900 x 650 mm
CONE CRUSHER : METSO HP 200
SCREEN : 1600 x 5000 mm
FOLD UP TYPE CONVEYORS
Weight:35,000kg
Warranty:Yes
Mobile crushing & screening plant
Ideal solution for processing of limestone, marble and similar materials.
Ready at stock. Delivery in 1 day.
250 tph capacity
Feeder : 20 m3
Primary impact crusher : 1500 x 1350 mm
Vibrating screen : 2.000 x 6000 mm
Fold up type conveyors
Automation system
Mobile chassis on 3 axles & 6 wheels
Length:1, 400 cm
Width:300cm
Height:420cm
High manganese steel ball mill liner
High manganese steel ball mill liner is used to protect the direct impact and wear of grinding ball and materials. At the same time, the different shapes of high manganese steel liners are used to adjust the movement state of the mineral, thereby enhancing the efficiency of grinding and crushing, which is helpful to improve the grinding efficiency, increase the output and reduce the mental consumption.
High manganese steel ball mill liner is used to protect the direct impact and wear of grinding ball and materials. At the same time, the different shapes of high manganese steel liners are used to adjust the movement state of the mineral, thereby enhancing the efficiency of grinding and crushing, which is helpful to improve the grinding efficiency, increase the output and reduce the mental consumption.
Main applications:
High manganese steel liner can be used for ball mill, crushers, loaders, excavators, cutting tools, bulldozers, digging bucket and knife plate, screw conveyor and other wear-resistant structural parts production equipment, by gas cutting processing and various welding, despite the steel sheet with high strength , but cold bending performance well, it can be cold forming.
Metallurgical industry: mainly used in sintering and ironmaking etc., bin liner, skip, pipes, cloth feeder and base, hopper, pipes, pump case, crusher parts, slag troughs, fans, vibrating screen;
Cement industry: the impact plate, pipe, pump case, mill liners, crusher parts, slag troughs, a variety of chassis, vibrating screen and so on.
Power industry: the ash pipe, hopper, fan blades, combustion pipelines, tanks and transport material bucket liners, crusher parts, mill parts, air handling systems and transport aircraft.
Coal industry: mainly used for coal washing and mining and mineral transport, truck cargo tank liner, bin liners, transporting tank lining, crusher unit, cover plate, wear bars and wear plates.
SAG Mill Liner
On Oct. 26, 2016, China National Gold Group Corporation held a centralized procurement tender of mill liners in Beijing, which to purchase mill liners for China Gold Inner Mongolia Mining Co.,Ltd. .
Property and advantages
1.High wear and impact resistance
2.High strength, high toughness
3. High cost-effective, strong adaptability
Property and Advantages
Our company cooperated with some famous universities orm a scientific research team with experts and scholars, use advantage production equipment. With our many years' research on many mines' mill liners and rich experience in design , we invent multielement alloy liners, which combined hardness and impact toughness perfectly, so it is not easy broken, with long using life. This type liner is suitable for SAG mills with size not less 5m,our liners can satisfy with the high requirements by using our special heat processing, the impact toughness can be 120-150J/cm, hardness can be HRC52-58, the properties reached the international advanced level.
The ztj-a stage collar is the device for discontinuous cementing operation in two times. It mainly consists of two-stage coupling (built-in hollow plug), first-stage plug, shut-off baffle, free-fall opening plug and closing plug.
1 drilling free stage tool use the standalone action model, that is every action, just is the related part to do, other parts will not be affected, prevent the operation mistake, for example, advance opening and advance closing.
2 there have the two plugsdesign for first-stage cementing. That is after first-stage plug downwards to stage tool, and compounded with hollow plug which in the stage tool, use the peculiarity of good isolation impression of hollow plug, solve the question that remain slurry in the inside wall of casing.
3 second-stage cementing use the design of easy open, easy close, slide smoothly. Free-fall plug use the heavy design, closing plug use the design of two element composite, it will realize drilling free cementing operation in the real sense.
4 all accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy.
HC3000-Super-Large Pendulum Mill in Asia, Technical Revolution of Pendulum Mill Industry, Upgraded Production of Traditional Raymond Mill
HC3000 Super Large Grinding Mill is the largest pendulum roller mill in china, developed by our engineer on the basis of HC1700 grinding mill. With 5 patents, the HC3000 grinding mill is widely used to grind almost any non-metallic minerals with Mohâ??s scare of hardness below 7 and moisture below 10%, such as kaolin, calcite, marble, talc, manganese, ceramic, etc. The fineness can be adjusted from 0.18mm(80 mesh) to 0.038mm(400 mesh). Not only can the HC3000 grinding mill live up to the national industrial policy and meet the needs of mass production, but also fills the gap of large-scale mill in the mill industry. This kind of mill plays a leading role in grinding technology, production capacity and power consumption per ton. With a production capacity of 90T/H, the HC3000 grinding mill can replace all kinds of mill, especially suitable for large-scale powder-making industry such as desulfurization and manganese.
Working Principle
Powder processing system technological process: raw material will be transport to semi-open shed by special vehicle, and then be shoveled into the crusher to be crushed into particles smaller than 40mm. The material particles will be raised to the storage hopper by the elevator and then be evenly sent to the main mill for grinding by feeder. The qualified fine powder will be classified and blew to the pulse dust collector as product and finally discharged from the dust collector. The product will be transported to powder storage. The system is designed as open circuit system with full pulse dust collecting (able to collect 99.9% of the powder), so the equipment has higher capacity and lower pollution. The product can be deep-processed according to actual technology. HC grinding mill has really high capacity so the product cannot be packed by hand-filling, the packing job is supposed to be done after the powder be sent to the storage tank.
Application Range
HC3000 Grinding Mill is widely used to grind any non-metallic minerals with Moh's hardness below 7 and moisture below 10%, such as limestone, calcite, activated carbon, talc, dolomite, titanium dioxide, quartz, bauxite, marble, feldspar, barite, fluorite, gypsum, ilmenite, phosphorite, clay, graphite, kaolin, diabase, gangue, wollastonite, quick lime, silicon carbide, bentonite, manganese. The fineness can be adjusted from 0.18mm(80 mesh) to 0.038mm(400 mesh), whose range is much wider than that of traditional raymond mill.
25480 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
