Split Sets

Supplier: Top hammer drilling tools, DTH rock drilling tools, refined thread bar, split set, and steel mesh wire
Services: Export

The coupling sleeve is an indispensable part of rock drilling tools for rock drilling. During the drilling process, the coupling sleeve is at the joint part of the matching drill, which bears the corrosion effect of stress such as axial tension and compression, bending and torsion, contact, and friction. The coupling sleeve used for threaded connection rock drill tools is to use its thread to connect two or more drill rods or shank rods on the same axis, transfer the impact function of the rock drill, and achieve the purpose of drilling rock holes, which is the same as the drill rod. It acts as a stress wave propagation carrier. Coupling sleeve classification 1. Classification by the geometric structure There are straight-through coupling sleeves, reducing coupling sleeves, and middle-stop-type coupling sleeves. 2. Classification by thread structure There are coupling sleeves such as wave thread, compound thread, trapezoidal thread, etc. Product Parameters Coupling sleeve type: full bridge coupling sleeve and reducing coupling sleeve Thread size: R32, R38, T38, T45, T51. For more product specifications, Please email us or leave us a message. 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.

As a modern supporting rock drilling tool, the shank adapter is produced with the development of drilling technology and rock drilling conditions. In terms of rock drilling technology, when developing from shallow hole drilling to medium and deep hole drilling, due to the limitation of the working section, to obtain deeper rock holes, it is necessary to use coupling sleeves on the same axis of the drill rod. Connect multiple drill rods for drilling. The shank rod used in this rock drilling process is the prototype of the development of the shank adapter. With the development of rock drilling equipment, the matching parts of the shank rod as a matching drill tool and the rock drill are more complicated, and the technical requirements for connection and cooperation are becoming more and more strict. To adapt to the changes, shank adapters of various structures have been produced. Shank adapter classification Common shank adapters are mainly divided into three categories: flange-type shank adapters, lug-type shank adapters, and spline adapters. The cross-section of the flange-type shank adapter is hexagonal, 22mm or 25mm for the inscribed circle diameter and 108mm or 159mm for length. It is manufactured by the forging process and is used for light rock drills. The lug-type shank adapter is used for inner-rotating medium-sized guide-type rock drills, and the diameter of the drill rod is 25mm or 32mm. The spline adapter is often used for heavy-duty guide-type external rotating rock drills with large torque, and the diameter of the drill rod is more than 38mm. It is often manufactured by a mechanical process. Product Parameters Shank adapter for pneumatic guide rock drill: It is suitable for small rock drills and can be operated manually. Shank adapter for Atlas Copco rock drill: It is suitable for the Atlas Copco rock drill, one of the most commonly used rock drills. Shank adapter for Sandvik Tamrock rock drill: It is suitable for the Sandvik Tamrock rock drill, one of the most commonly used rock drills. Thread size: R28, R32, R35, R38, T38, T45, T51. For more product specifications, Please email us or leave us a message. advantage 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.

The drill rod is the part that links the drill bit and the shank adapter in the rock drill and undertakes the task of transmitting the impact energy to the drill bit, the rotational torque, and the flushing medium. In actual use, the force conditions of the drill rod are harsh, and it is easy to consume a large number of wearing parts. Product Category Drill rods include tapered drill rods and threaded extension rods according to their connection methods. Tapered drill rod: It is suitable for drilling shallow holes, the tail is connected with the rock drill using the shank adapter, and the tapered part of the head is connected with the drill bit. Threaded extension rods: It is more suitable for drilling deep holes. It can use a sleeve with female threads to connect two drill rods with male threads. With the deepening of the hole depth, multiple drill rods can be connected. It is very convenient to remove the rod from the connection after chiseling. Except by connection type, drill rods include light drill rods and heavy drill rods. Light drill rods include tapered drill rods, shank rods, and integral drill rods. Heavy drill rods mainly include drill rods used for drifting and tunneling rigs, benching drilling rigs, and Open-cutting drilling rigs. Length Light drill rods: 300mm-6000mm(without shank, the conventional length of the shank is 108mm). Heavy drill rods: 600mm-2000mm(Drill rods less than five meters are available). 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.

The rock drill bit is connected with the drill rod, through the drive of the rock drill to achieve the purpose of cutting rock parts, the whole system to bear the greatest impact and wear parts. There are different types of rock drill bits, such as chip bits, button bits... Kelleg offers a wide range of rock drill bits, including top hammer bits and DTH drill bits. Top hammer bit type 1. chisel bit: suitable for light rock drills to drill rock formations with low hardness. 2. Cross bit and X bit: suitable for drilling cracked rock formations and highly abrasive rock formations under the condition of rock drills with large impact power, and have strong radial abrasion resistance. 3. Button bit: Under the condition of a rock drill with a large impact power, it is more suitable than a flaky insert drill bit, has a higher rock drilling speed and service life, and the drilled hole shape is relatively round. 4. Diameter of drill bit: chisel bits: 32mm-42mm cross bits: 34mm-65mm X bits: 55mm-65mm button bits: 38mm-150mm DTH drill bit type 1. Including low-pressure DTH drill bits, medium and high-pressure DTH drill bits (high-efficiency and energy-saving types) 2. Nominal diameter: low-pressure DTH drill bits: 70mm- 250mm medium and high-pressure DTH drill bits: 90mm-508mm Efficient energy-saving medium and high-pressure DTH drill bits: 110mm-254mm For more product specifications, Please email us or leave us a message. Kelleg's advantage 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.

HSS M35 Cobalt 5% Twist Drill Bits SET, 1.0-10.0X0.5MM, 135 SPLIT POINT, DIN338 STANDARD, Amber Finishing,rose Plastic Box Packing

Standard: din338 Material: hss4241, hss4341, hss9341, m42; m35; m7; m2, etc Finish: black oxide, polished, tin coated and rainbow etc Process: roll forged, half ground, fully ground Point angle: 118 or 135 split point Application: for drilling cast steel, malleable iron, sintered metal, non-ferrous metals and wood, etc Packing: by plastic bag, metal box etc Diameter ranges from 1mm to 20mm. Drill sets like 13/19/25pcs are available. We make them in accordance with your demand. By plastic bag, metal box etc

In today's powder field, a grinding processing equipment is needed to make ore ore, or to process crushed stone. The processed split materials are widely used in chemical, construction, metallurgy, industrial and other fields. The powder mill machine industry is developing rapidly. Now there are many types of powder mill machine, such as ultra-fine mill, vertical mill, high-pressure suspension roller mill, Raymond mill and other milling equipment, among which these mills are your favorite. What? The customer is an old customer of Clirik. He has established a deep friendship with Clirik for many years. This time, the 800 mesh calcite powder processing project, the customer still collides with Clirik, after the previous stage of investigation, production, production, commissioning and other stages. This 800 mesh calcite powder mill machine was officially put into production stage. The production site, the workshop environment is clean and tidy, the dust pollution is less, the whole production line has high intelligence and high technology content, low noise, large production capacity and low energy consumption. The customer warmly welcomes and loves. Nowadays, the more popular mills on the market are ultra-fine mills, ultra-fine vertical mills and Raymond mills. The requirements for the processing of ore materials have also increased, because the application value of fine powder is getting higher and higher. In order to meet this production demand, the ultra-fine grinding machine should be born to meet the fine powder of fine powder production. Production equipment. Now the ultra-fine mill can be fully realized, and the fineness can be adjusted freely between 325-3000 mesh, and the internal structure is simple and reasonable, the grinding efficiency is high, the energy consumption is low, the complete set is also strong, energy saving and environmental protection is a The ideal fine powder processing equipment. Raymond mill is one of the common equipments in the mining industry, and it is also a kind of powder mill machine used by customers.

1.Brief Introduction of QTZ-3 soil sampling drilling rig QTZ-3 portable earth drilling rig is further improved on the basis of the QTZ-2 portable drilling rig, which is more humanized and more suitable for researchers in scientific research institutions or universities. The power is further strengthened, which can meet the requirement of soil sampling for 15~20 meters depth. 2.Applications of QTZ-3 soil sampling drilling rig ï¬Geotechnical engineering investigation; environmental soil survey; agricultural soil survey. ï¬Ground water survey; coastal geological survey; wetland environment investigation. ï¬Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling. 3. Specifications of QTZ-3 soil sampling drilling rig QTZ-3 portable soil drilling rig Power power 3.8hp lighter way back flush pull rope oil consumption 0.6 l/h Impact times 2460 r/min Impact energy 35j-70j Core depth 15m-20m Host weight 26kg 4. Configuration list of QTZ-3 soil core drilling machine Item Parameter Unit Quantity Portable driller QTZ-3 platform 1 Cylinder impact hand 52*107 pc 1 Tapered tap 32*80 pc 19 Drill pipe 32*700 pc 19 Taper tap 32*100 pc 19 Reducing nipple 32*50 pc 1 Collar 50*150 pc 1 Open tube 50*600 pc 1 Double tube boots 50*100 pc 2 Reducing nipple 32*70 pc 1 Collar 70*150 pc 1 Split duct 70*600 pc 1 Inner edge pipe boots 70*100 pc 1 Outer edge pipe boots 70*100 pc 1 Portable sounding hammer 10kg pc 1 Sounding the reducing nipple 32 pc 1 Double sided hand 32 pc 1 Touch probe 32 pc 1 Puller three force arm set 1 The ratio of oil 25:1 pc 1 Oil injection funnel pc 1 Forceps 80mm hold 1 Wrench 24/27 1 Small wrench 8/10 1 Internal six party #4 1 Internal six party #5 1 Internal six party #6 1 Hexagonal spanner 1 Spark plug wrench 1  Screw driver 1 Spare spark plug 1