Specification:
1).Size: 2'', 3'', 4''
2).Working pressure:6000-20000psi(42mpa-140mpa)
3).Working temperature: -29â°c~121â°c.
4).Application enrvironment: standard or h2s
5).Standard: api standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Supplier: Talc powder, spodumene lithium, lead ,zinc, copper, from afghanistan and dry fruit like pine nuts, saffron, walnut, fig the best quality
Buyer: Urgent need of the lead processing plant 500mt daily bases, copper processing plant 500mt daily bases capacity, antimony processing plant
1. Structure: it is a normal api standard deposition with tungsten alloy coatings on the ir inner and outer walls. 2. The performance indicators: Basic performance: meet api standards. Corrosion properties: resistance to corrosion of H2s and Co2 with high temperature, salt water, alkali and weak acid corrosion, meeting the corrosion resistance requirements of standard nace 0177. Wear resistance: good wear resistance, equivalent to hard chromium layer. Adhesion of tungsten alloy layer and substrate: tested according to gb / t5270-2005, the tungsten alloy layers dont crack of peel off. Appearance: uniformly bright, silvery white Tungsten alloy layer thickness: 40-60 3. Performance testing Wear and corrosion test: having passed a variety of the wear and corrosion resistance tests carried out by an cnpc tubular goods research institute, xian maurer petroleum engineering laboratory, and quality supervision and inspection center of surface covering layer products for machinery industry. Standard shipping packaging, as required
BOP Accumulator Units meet or exceed the design specification as specified in API 16D. Each control system is specifically engineered to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions. For price and specification please contact us.
Sl-swivel with spinner Xsl-swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel.It is designed and manufactured according to api spec 8c "specification for drilling and production hoisting equipment" Skype: julia0402zcy Water swivel for drilling 1.Ma.Static load:4500kn 2.Max.Rotary speed:500r/min 3.Max.Wp:35mpa 4.Id of center pipe:75mm Water swivel for drilling The swivel includes two main categories, which are common swivel and double duty swivel. Double duty swivel is a common swivel combined with a spinner. Common swivel consists of swivel bail, shell, support, gooseneck, central pipe, master bearing, joint and other parts. The lower end is connected with kelly stem by reg thread. The swivel bail is hung on the hook. Gooseneck and rotary hose can be connected by reg thread connection or union connection. Washpipe packing set assembly adopts cassette structure, so it can be quickly replaced without disassembling rotary hose and gooseneck. 3lp and 4lp internal or external thread hose connection thread are available for you. We can also manufacture low temperature resistant swivel according to customer's requirements. Our swivel meets api spec 8cpsl1 standards. It has been awarded the api certification issued by the american petroleum institute and is allowed to use api monogram.
XSL Swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel. It is designed and manufactured according to API Spec 8C Specification for Drilling and Production Hoisting Equipmentâ?� SL Swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel. It is designed and manufactured according to API Spec 8C Specification for Drilling and Production Hoisting Equipmentâ?�
Supplier: Tie rod end, axial joint, link stabilizer,steering and suspension parts, heavy construction,agricultural parts
Supplier: Cold rolled and machined rings for bearing rings and constant velocity (cv) joints, swaged and machined axles for trucks, OCTG products- especially the couplings, honed tubes for cylinders, gear blanks and components for the automotive and earthmoving equipments
This series penumatic reversing valves are mainly used for regular reversing, high temperature, high humidity and the occasion uniffting for man, remote control is possible by utilizing these series of valves. API 8C Drilling rig Swivel parts Pneumatic Reversing valves Specification Penumatic reversing valves specification Model QF506 K24JQ-L40 Pressure Mpa 0.5-0.9 PSi 72-130 Main air inlet size 2-G1 2-Rc 1-1/2 size mm 168*120*120 250*150*160 in 7*5*5 10*6*7 Weight kg 5 10 lb 9.3 13 Packaging & Shipping Packing information: Wooden case, Cartong case, Container or other way, as your request. API 8C Drilling rig Swivel parts Pneumatic Reversing valves Shipping information: By Express, Air, Sea, Car, Train etc, are accept. we can discuss when you order.API 8C Drilling rig Swivel parts Pneumatic Reversing valves FAQ How can I place order? A: You can contact us by email about your order details, or place order on line. How can I pay you? A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), L/C, D/P, Western Union are the most usual ways we are using. If you want to use other way, please tell me, we can discuss. Whatâ??s the order procedure? A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr-epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donâ??t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. How do you take care when your clients received defective products? A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
