1. About the Manual: The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. CONSTITUTION: Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly 3. Usage: It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc. Specifications We can produce series of downhole motors in different sizes, as 57(21/4"),73(23/4"),89(31/2"),95(33/4"),120(43/4"),127(5"),165(61/2"),172(63/4"),178(7"),185(71/4"),197(73/4"),203(8"),216(81/2"),244(95/8"), etc.
1. About the Manual The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 3. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly Mud motor, Downhole Motor used for HDD machine Rock conditation Drilling, Rock tools Usage It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc. A Variof Types &ety the Capabilities In accordance with the actual drilling needs, we push out high, midiem and low speed downhole motors, of a variety of types with different functional configuration and application for all working conditions.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/ BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Standard: API Spec 16A,16C Working pressure:2000psi-15000psi(14 Mpa-105Mpa) Operating temperature:-18deg--121deg Bore size:7 1/16"-21 1/4" Top & nottom connection:Flanged,studded
Type TCI(Tungsten Carbide Insert) tricone bit IADC CODE Available 417 427 437 517 527 537 617 627 637 737 837 832 415 425 445 525 625 635 416 427 436 446 447 516 526 537 547 516 536 535 Available sizes: 3 3/4" (95mm), 4 1/8â??(105mm), 4 1/4"(108mm), 4 3/4â??(121mm), 5 5/8"(143mm), 5 7/8â??(149mm), 6â??(152mm), 6 1/4"(159mm), 6 1/2"(165mm), 6 3/4"(171mm), 7 1/2"(190mm), 7 7/8â??(200mm), 8 1/2â??(216mm), 8 3/4" (222mm), 9 1/2â??(241mm), 9 5/8"(245mm), 9 7/8"(250mm), 10 5/8"(269mm), 12 1/4"(311mm), 14 3/4"(348mm), 17 1/2"(445mm) Application formations Soft ,medium soft ,hard,medium hard,very hard formation Material Body: Alloy steel Tooth marterial: Tungsten carbide insert(TCI)
Roll-Forged Sheaves are available in many configurations in order to meet various oilfield applications. Roll-Forged sheaves are available in sizes up to 78 in diameter. Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing. Each sheave in the table below has a machined bore sized to accept the respective bearing number shown. The sheaves are provided from the factory plain bore (the bearings are not included).
Air operated thread protector is also called Inflatable thread protector. It is used to protect the outer thread of casing and tubing pipe. Its outstanding feature is that its gas nozzle is manufactured on the facade, which can protect the gas nozzle in the pipes loading, unloading and transportation process. The gas nozzle of dismountable inflatable thread protector is on the side, which may damage the gas nozzle. Inflatable thread protector is made from polyurethane containing a stainless steel ring in it, so integral inflatable thread protector is resistant to corrosion, abrasion and oil. It has many advantages, such as fast inflation, easy operation, good air-tightness, lowering consumption and cost. Besides, it can be repeatedly used. Features: The Air operated Thread Protectors provide a 360�° grip with greater, evenly divided holding power. - Durability is enhanced because the outside of the protectors does not change; only the inside inflates to provide a better grip on the pin. -Absence of moving parts, metal clamping bars, or other mechanisms provides a long and virtually maintenance-free life cycle. -The bottom of each protector contains a rugged buffer. -Air operated thread protectors provide firm attachment to all thread types for greater operational flexibility. -Rugged construction makes this protectors resistant to high temperatures and rough handling for a long life cycle. -Pressurization by air facilitates installation and release for operational efficiency.
Fill and Circulate Tool (hereafter referred to as FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time without installation of a casing swage. The FAC Tool has features with easy â??to- use , safe and reliable , no leakage and so on, which lightens labor intensity of workers greatly and improves operation environment of well. The FAC Tool is composed of ten parts (shown in figure) , whose main function of components are below: 1. Drill Pipe Connector: The FAC Tool built for top drive rigs connects to the drill pipe threads of the rigâ??s top drive unit via the Drill Pipe Connector. The threads of the Drill Pipe Connector are standard 4 1/2 IF, but crossovers are available for other drill pipe threads. 2. Extension: For applications where long elevator links are used, Extensions are placed between the Drill Pipe Connector and the Mandrel. On the Extension are two Pad Eyes that make it easy to manipulate the Tool around the Rig during rig up or rig down. Also, while the Tool is in use, a Safety Cable attaches to one of the Pad Eyes in the event the Tool should accidentally come loose from the top drive. In place of the Extensions, a Drill Pipe Pup can be used between the top drive connection and the Drill Pipe Connector instead of extension. 3. Mandrel: The Mandrel houses the specially designed Seal Assembly that is used to seal off the casing string. The Seal Assembly has three parts: the Seal Retainer, the Sealing Element, and the Gauge Ring. 4. Seal Retainer: Aluminum part that keeps (retains) the Sealing Element from being extruded upward while circulating. 5. Sealing Element: Elastomeric Seal that seals off the casing for circulation. It is hollow so circulation pressure can energize the seal it creates against the casing bore. 6. Gauge Ring: Tapered Aluminum piece that guides the Seal Assembly into the pipe and has holes to allow energizing pressure into the Sealing Element. 7. Retainer Sub: The Seal Assembly is held in place with the flexible hose. 8. Flexible Hose: The Retainer Sub is also used to connect a high pressure Flexible Hose. This Hose prevents any hard stack out between the FAC Tool and the casing and compensates for misalignment and casing movement during make up. 9. Mud Saver Valve: Below the Flexible Hose is the heart of the FAC Tool, the Mud Saver Valve. It is essentially a two-way check valve. This Valve opens with pressure when the mud pump is turned on and closes when the mud pump is turned off. It also permits flow in the upward direction for releasing pressure.
Type TCI(Tungsten Carbide Insert) tricone bit IADC CODE Available 417 427 437 517 527 537 617 627 637 737 837 832 415 425 445 525 625 635 416 427 436 446 447 516 526 537 547 516 536 535 Available sizes: 3 3/4" (95mm), 4 1/8 (105mm), 4 1/4"(108mm), 4 3/4 (121mm), 5 5/8"(143mm), 5 7/8 (149mm), 6 (152mm), 6 1/4"(159mm), 6 1/2"(165mm), 6 3/4"(171mm), 7 1/2"(190mm), 7 7/8 (200mm), 8 1/2 (216mm), 8 3/4" (222mm), 9 1/2 (241mm), 9 5/8"(245mm), 9 7/8"(250mm), 10 5/8"(269mm), 12 1/4"(311mm), 14 3/4"(348mm), 17 1/2"(445mm) Application formations Soft ,medium soft ,hard,medium hard,very hard formation Material Body: Alloy steel Tooth marterial: Tungsten carbide insert(TCI)
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/ BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Standard: API Spec 16A,16C Working pressure:2000psi-15000psi(14 Mpa-105Mpa) Operating temperature:-18deg--121deg Bore size:7 1/16"-21 1/4" Top & nottom connection:Flanged,studded How to contact us?
Roll-Forged Sheaves are available in many configurations in order to meet various oilfield applications. â?¢ Roll-Forgedâ?¢ sheaves are available in sizes up to 78â?? in diameter. â?¢ Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing. â?¢ Each sheave in the table below has a machined bore sized to accept the respective bearing number shown. â?¢ The sheaves are provided from the factory plain bore (the bearings are not included). How to contact us?
