API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality Product Description 1. Strictly according to API 5DP standard 2. Yield strength: Min 517 Mpa 3. Tensile strength: Min 724 Mpa 4. Pipe body material: High quality alloy seamless pipe of E75 5. Thread treatment: Phosphorization or copper plating 6. The material is seamless steel pipe from China most famous enterprise Baosteel and Tianjin seamless steel. Drill pipe quality control: 1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China. 2.Checked by our QC staff and factory own laboratory. 3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing. 4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others. Drill pipe usage notes: 1.New drill pipe should be pasted thread oil before connection 2.Make up and break at least 3 times before drilling 3.Hard bending and plastic coating can be processed according to costumer special requirement. Name:water well drill pipe OD:2.375-140mm Thickness:0.27-11.4mm Steel Grade:E75 , X95, G105, S135 Type od end finish:EU-external upset, IEU-internal & external upset Standard:API 5DP payment:L/C,TT Package:bare bundle or as request Delivery:10-20days after receiving the deposit Port:xingang, tianjin Market:Mid east, North/South America,Europe,Asia,Africa etc.
The Integral Spiral Blade Stabilizer is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5051-91 Standard. It is mainly used to stabilize the drilling tools in the process of drilling hole. It can be separated into Drill String and Near bit types. -
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality Product Description 1. Strictly according to API 5DP standard 2. Yield strength: Min 517 Mpa 3. Tensile strength: Min 724 Mpa 4. Pipe body material: High quality alloy seamless pipe of E75 5. Thread treatment: Phosphorization or copper plating 6. The material is seamless steel pipe from China most famous enterprise Baosteel and Tianjin seamless steel. Drill pipe quality control: 1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China. 2.Checked by our QC staff and factory own laboratory. 3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing. 4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others. Drill pipe usage notes: 1.New drill pipe should be pasted thread oil before connection 2.Make up and break at least 3 times before drilling 3.Hard bending and plastic coating can be processed according to costumer special requirement. Name:,water well drill pipe OD:,2.375-140mm Thickness:,0.27-11.4mm Steel Grade:,E75 , X95, G105, S135 Type od end finish:,EU-external upset, IEU-internal & external upset Standard:,API 5DP payment:,L/C,TT Package:,bare bundle or as request Delivery:,10-20days after receiving the deposit Port:,xingang, tianjin Market:,Mid east, North/South America,Europe,Asia,Africa etc.
SizeWeightPlain end weightDiameterGradeWall thickness Lb/ftkg/minmmInmm 2 3/86.656.269.322.37560.3E,X,G,S0.287.11 2 7/810.49.7214.482.87573E,X,G,S0.3629.19 3 1/29.58.8113.123.588.9E0.2546.45 3 1/213.312.3118.343.588.9E,X,G,S0.3689.35 3 1/215.514.6321.793.588.9E0.44911.4 3 1/215.514.6321.793.588.9X,G,S0.44911.4 41412.9319.264101.6E,X,G,S0.338.38 4 1/213.7512.2418.234.5114.3E0.2716.88 4 1/216.614.9822.314.5114.3E,X,G,S0.3378.56 4 1/22018.6927.844.5114.3E,X,G,S0.4310.92 516.2514.8722.155127X,G,S0.2967.52 519.517.9326.715127E0.3629.19 519.517.9326.715127X,G,S0.3629.19 525.624.0335.795127E0.512.7 525.624.0335.795127X,G,S0.512.7 5 1/221.919.8129.515.5139.7E,X,G,S0.3619.17 5 1/224.722.5433.575.5139.7E,X,G,S0.41510.54 6 5/825.222.1933.056.625168.3E,X,G,S0.338.38 6 5/827.724.2136.066.625168.3E,X,G,S0.3629.19
1. Scope Model DYFZ-A mechanical stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances. 1.1. Excessive injection of cement at one shot. 1.2. The formation cannot bear the gigantic fluid pressure. 1.3. Packoff special strata. 1.4. Avoid the occurrence of annual air channeling after the cementing job. 1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance. 1.6. Two-stage cementing for deviated and horizontal wells 2. Structure Model DYFZ-A mechanical stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug, Free-fall opening plug and closing plug 1. An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits. 2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve. 3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure. 4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy. 5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening. 6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the clos Specifications(in),7" Opening Pressure(Mpa),7 Closing Pressure(Mpa),5.5 Sealing Capacity(Mpa),,25 Rated Load(t),180 Connection Thread,API 7" Max. OD. (mm),208 Drill-out ID. (mm),157 Overall Length (mm),990 Length of first-stage plug (mm),320 Length of closing plug (mm),280
The drill collar is used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill. Materials: Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available. Trepanning and Heat Treatment: Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface. Traceability: Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies. Rigid Inspection Procedures: We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar. Rolling: Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation. Phosphate-coated or Copper Plating: All connections are phosphate-coated or copper plated to improve resistance to corrosion. Slip Groove, Elevator Groove and Size: Huanjie offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines. Thread Protectors: Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Description Drill pipe joint acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work. It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations. Cross-over sub is API standard Material is AISI 4145H chromium-molybdenum steel. We can offer Kelly cross-over sub, Drill pipe cross-over sub, Interim cross-over sub, Drill collar cross-over sub, Drill bit cross-over sub, Swivel cross-over sub, Fishing cross-over sub, etc. All connections are phosphatized, coated with lubricant and provided with thread protectors. All tool joints should be inspected at full length by fluorescence magnetic particle and ultrasonic method. Tool joints are for pipes from 2 3/8" to 6 5/8", grade is E 75, G 105 and S 135; upset style is EU, IEU or IU. Specification Material: AISI 4145H premium alloy steel Upset style: EU, IEU or IU Application: 2 3/8" ~ 6 5/8" dill pipes Tool joint connection DP nominal weight lb/ft Steel grade O.D.(in) I.D.(in) Pin tong space(in) Box tong space(in) Pin/Box bevel diameter(in) NC31 10.4 G105 4 1/8 2 7 9 3 61/64 S135 4 3/8 1 5/8 7 9 3 61/64 NC38 13.3 G105 5 2 7/16 8 10 1/2 4 37/64 S135 5 2 1/8 8 10 1/2 4 37/64 NC46 16.6 X95 6 1/4 3 7 10 5 23/32 G105 6 1/4 3 7 10 5 23/32 S135 6 1/4 2 3/4 7 10 5 23/32 NC50 19.5 X95 6 5/8 3 1/4 7 10 6 1/16 G105 6 5/8 3 1/4 7 10 6 1/16 S135 6 5/8 2 3/4 7 10 6 1/16
All products will be made according to API and related international standards as per customers' requirements. Shale shaker is first phase solids control equipment in drilling fluids processing system, also known as key solids control equipment in drilling mud system, shale shaker decides performance of the whole solids control system. Lake Solids Control can design double shakers and triplicate shakerson single skid according to clientsâ??special requirements and also supply relevant connecting manifold, according to current industry situation, We provide both third generation linear motion shale shaker and fourth generation balanced elliptical shale shaker. ZS linear motion shale shaker absorbed advanced tech at home and abroad ,and integrated GN own design. Our complete series shale shaker can meet customers variable demand. Clients feedback proved the advantages of this kind of shale shaker: high G-force, wide screen area, compressed structure, cost-effective, etc. Features: Patent shale shaker deck angle adjustable while working, mechanical deck angle adjustment with reliable performance. Patent tighten rubber sealing for shale shaker deck and screen, long life and easy replacement. Shale shaker bottom deck made from Stainless Steel for long service life. Heat treatment on complete shale shaker deck for High G force operation. Pretensioned shale shaker screen for fast screen replacement Famous Brand Vibration Motors : IEC Ex, ATEX and UL Certified Electrical components: SIEMENS, Schneider Brand Flexible feeding type including Weir Feed, Top Feed, and Hopper Feed for different applications. Parameters Specify Vibration Mode Linear Motion Capacity 45m/h(200GPM)-140m/h(616GPM) Vibration Motor 20.75Kw-21.94Kw Screen Qty 2 Panels-6 Panels Screen Size 750 900mm-585 1165mm (Upper Layer:2.0m) Screen Area 1.35m 2.7m (Under Layer:2.6 m) Adjustable G Force 7.1G-7.5G Vibration Amplitude 3.92~5.62mm-4.14~5.96mm Deck Angle Range from +2 to 1~+5 Weir Height 710mm-895mm EX Standard ExdIIBt4/IEC EX/ATEX Weight 907kg-1864kg Dimension:mm 1676 1728 1062-272 2025 1428 Remarks Above capacity only for reference, actual capacity will be various as per screen API No. and mud conditions
API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield Working Pressure: 35Mpa---105MPa API Standerard Product Name: API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield Origin Place:Dongying City,China Assembly: X-Mass Tree Assembly , Valves and other small connections Material:AA, BB, CC, DD, EE, FF and the other Brand:RT Exported to Canada,America,Saudi Arabia,Kuwait,Iraq,UAE,Oman,Pakistan Packing:Pallet or according to your requirement Our service:Technical support of assembly the well head products and we have some other oilfield chemicals such as high temperature foaming agent
All products will be made according to API and related international standard as per customers' requirements. This hydraulic winch is a lifting equipment driven and braked hydraulically. It has the advantages of compact structure, light weight, convenient operation and stable lifting. It is used to lift heavy things in mines, ports and construction site. The winch is designed and manufactured according to API Spec 7K â??Specification for Drilling Equipmentâ??. Model YJ3/150 YJ5/100 Flow rating L/min 120 120 gpm 31.7 31.7 Pressure rating Mpa 16.6 16.6 psi 2400 2400 Pull rating kN 3 5 US ton 3.3 5.5 Average rope speed m/min 27 11 ft/min 89 36 Wire rope diameter mm 15.5 20.5 in 5/8 3/4 Rope storage m 150 100 ft 492 328 Size mm 690480440 880520710 in 271918 352128 Weight kg 230 490 lb 507 1080
