DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
shell fabric 100% polyester padding S-XL
Shell fabric 100% polyester padding
Shell fabric 100% polyester down jacket 80/20 down 90cm-120cm
Shell fabric 100% polyester down jacket 80/20 down 110cm-160cm
shell fabric compostion: 92% polyester 8% elastane UPF50+ Sun-protective women's Summer knit ice silk Sun protective jacket men's uV breathable skin WEAR
PRODUCT IN FORMATION STYLE NUMBER:RST-DJ-002 SIZE:L-XL-2XL-3XL-4XL SHELL FABRIC :100%POLYAMIDE LINING FABRIC::100%POLYESTER COLOUR:BLACKã??OLIVEã??NAVY HOOD TYPE:DETACHABLE LENGTH SHORT MODERATE LONG THICKNESS THIN MODERATE THICKENSTYLE SLIM MODERATE LOOSE
100% polyester ladies padded sherpa inside jacket, size S-3XL
Product Name: PE coated paper roll; Base Paper Weight: 50~350gsm; PE Weight: 15~25gsm; PE coating Type: single side or double side; Width: 600~1200mm; Roll Dia: 1100~1200mm; Core Dia: 3 inch or 6 inch; MOQ 15 Tons FOB price: TBD Term of Price: FOB Shenzhen port or CIF destination port Port of Loading: Shenzhen port Delivery Time: ~30 days
Spring Summer Short Top Europe and America New Sexy Cross Fit Pleated Solid Tank Top Women's Wear
New sequin suspender vest for women's sexy bottoms, top on top, banquet annual meeting suit on top
Sweater Content:100% Wool
Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.
Quick Details Place of Origin: Sichuan, China Brand Name: WOCO Model Number: CDW-5 Alloy Specification: WC12Co Particle: -45+15um process: agglomerated&sintered Color: dark gray Ct: 5.4-5.8 Co: 11.5-12.5 Fe: â?¤0.5 others: â?¤0.1 W: Balance Apparent Density: 4.8-5.3g/cm3 Hall Flowability: 18s/50g
Water Borne Peelable Resin PU-3018A Product Introduction PU-3018A is a protective resin made of water borne polyurethane dispersions, using high performance additives and advanced processing technology. The waterborne peelable coating made of this resin has bright color, and fine particle size, coated on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, with good protection, can form a continuous, uniform, strong protective coating on the surface of complex shapes, can isolate the erosion medium, protect the surface of the substrate not easy to be worn, abrased, scratched, meanwhile, moisture-proof, rust-proof, corrosion â??proof, improve the commodity value of coated products. Upon completion of the protection period, the film can be conveniently removed to restore the original appearance of the object. Physical Property ModelPU-3018ACompositionPolyurethane organosilicon copolymerAppearanceMilky liquid with blue shadeSolid content35�±2%PH7.1-8.0IonicityAnionViscosity (Brookfield 25â??)50-160mpa.s Performance Features High peeling strength, not easy to break High strength, good water resistance Excellent low temperature resistance, weather resistance, air permeability and moisture resistance, and universality of different substrates Applications All kinds of metal surface, for example, temporary protection of products such as automobiles and stainless steel appliances Temporary protection of all kinds of glass products Temporary protection of all kinds of plastic products Can be used as temporary protection for coating, ink coating Can be used as temporary protection for other products Application Guide Can be directly painted on the surface of the construction surface, or add the right amount of water after dilution Can be added talc, silica and other inorganic split materials Can also add resin-free pigment paste to do color temporary protection coating The peelable film dry completely, when it needs to be removed, please tear out a long mouth along the edge of the film, and then slowly peel the film from the coated surface with a force of about 4-5kg Packaging and Storage Condition 50KG, 120KG, 200KG plastic drum; Stored in a 100% light â??proof sealed container; Stored in a cool and dry place indoor at 5-30â??; Under high temperature or exposure, the shelf life will be significantly shortened; Shelf life is 12 months from the date of production under condition that the drum is not opened. Special Tips This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
Roller coater Double Roller Coater is a kind of coating which is applied to the coating surface by the coating roll, and the coating machine is the main type of coating machine. The amount of coating can be adjusted by measuring the pressure between rollers. The pressure is strengthened, the amount of passing paint is reduced, and the amount of coating is also reduced.
Facade reflective marking coatings have high reflective properties that increase visual effects and improve road safety. The facade reflective marking coating is made of high quality acrylic resin and high reflective material. It is a new type of reflective paint. There is no requirement for the flatness of the surface of the substrate, and it can be directly applied to the surface of various objects, especially for vertical surfaces.
SECrosslink-3010 single component, low temperature rapid curing, low surface resistance, mainly used in circuit board packaging, composite material shell, plastic shell, aircraft body electromagnetic wave shielding, suitable for jet and screen printing process. Brand SECrosslink Type SECrosslink-3010 Product name EMI Electrically Conductive coating Appearance Silver gray Resin types Acrylate Application Electromagnetic wave shield of circuit board package, composite shell, plastic shell, aircraft body Adhesive force excellent Volume resistivity 75 DB
Sublimation Coating Spray Liquid for Cotton Fabric Color: White Volume: 1000ml MOQ: 6 liters Payment: Western Union, Paypal,T/T
MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of MicroF_W168 is between 5.5 and 6.0 microns, and the maximum particle size is 21 microns. Application: Top grade water-based ink, water-based wood coating, Waterborne coatings, etc; Addition quantity: about 1%, can be added directly in the water-based system; Advantage: can be directly dispersed in the water-based system; Characteristics: good storage stability, good smoothness and wear-resistant performance.
