Emi Electrically Conductive Coating

Supplier: Electrical materials, electrical equipments, lighting fixtures, plumbing materials, ac materials, it materials, ceiling materials, partition materials, painting materials, floor tiles, hardware materials, hand tools & power tools, garage tools, wooden & carpenter materials, batteries. medical equipment and medical consumable product and medical surgical equipment.

Conductive graphene EMI shield coating Surface resistance:

Introduction Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing. Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate. Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors. Typical Uses and Applications Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway barriers, posts and poles, offshore structures and marine structures. Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles EMI and RF shielding on plastic components (electric arc spray only) Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps Product Details Chemical composition: Type Chemical composition Zn Al Others Zn 99.9+ Balance 0.1 Zn 15Al Balance 15 Specifications Grade AWS Zn C2.25/C2.25M W-Zn-1 Physical Properties Grade Density Rockwell Hardness Zn 7.14 g/cm3 ZnAl 7.18 g/cm3 Typical Deposit Characteristics: Grade Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab Zn HRB 20 - 30 6.9 - 15.0 Mpa 24 lbs /hr/100A 0.7 Good Zn 5Al HRB 40 -45 20.7 - 24.1 Mpa / / Good Standard Sizes & Packing: Diameter Packing Wire Weight 1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool Other sizes can produced based on customers' requirement.

Armi Solar Panel Coating | Self-Cleaning 3years Durable Coating | Retrofit Maintenance Solution | Graphene Based Non-Flammable Formulation | 500 ML SPRAY PACK HYDROPHOBIC SELF CLEANING MINIMISES SCRATCH IMPROVES ENERGY EFFICIENCY COMES IN SPRAYABLE HDPE PACK your solar panels will stay clean and maintained, offering increased efficiency and power output with high-strength weather protection.

Elevate Your Style with the Latest Trend: Super Hydrophobic Nanocoating for Fabric! Introducing True Sustainability: Crafted from Graphene - Nano Formulation, a harmonious blend of aqueous-based graphene and ceramic matrix. Super Hydrophobic Coating Anti-stain, Long-lasting Performance Ideal for Fabric, Rugs, Sofas, Carpets, Shoes, Sandals Embrace the Trend: Hydrophobic & Fully Organic SuperHydrophobicCoating by Armi

Elevate Your Style with the Latest Trend: Super Hydrophobic Nanocoating for Fabric! Introducing True Sustainability: Crafted from Graphene - Nano Formulation, a harmonious blend of aqueous-based graphene and ceramic matrix. Super Hydrophobic Coating Anti-stain, Long-lasting Performance Ideal for Fabric, Rugs, Sofas, Carpets, Shoes, Sandals Embrace the Trend: Hydrophobic & Fully Organic #SuperHydrophobicCoating by Armi

Supplier: Electronic semiconductor industry, silver conductive paste for screen touch screen, conductive paste for rifd, led die attach conductive adhesive, uv curing conductive adhesive, conductive coating for electromagnetic interference, conductive paste for photovoltaic solar, conductive ink for lithium ion battery anode, interfacial thermal conductive materials, optical communication adhesive, special adhesive, nanometer materials and functional coatings

Advanced Reflective Insulating Coating Reflective insulating coating is made of imported and domestic reflection, insulation raw materials, TAO, etc., self-crosslinking polymer. After the film is formed into a film, it has the characteristics of high heat-reflecting heat insulation, weather resistance, and excellent stain resistance. It can effectively reduce the surface temperature of the wall and is suitable for all kinds of building energy-saving projects. It is a new energy-saving waterproof and heat-insulating material that integrates anti-heat, radiation and barrier functions. The coating can reflect more than 85% of solar radiation and near-infrared light in the range of 400-2500nm (the solar reflectivity is 0.85), effectively preventing the heat accumulation of sunlight. At the same time, a thermal resistance material with extremely low thermal conductivity is added to the coating to effectively block the transfer of thermal energy.

Water Borne Peelable Resin PU-3018A Product Introduction PU-3018A is a protective resin made of water borne polyurethane dispersions, using high performance additives and advanced processing technology. The waterborne peelable coating made of this resin has bright color, and fine particle size, coated on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, with good protection, can form a continuous, uniform, strong protective coating on the surface of complex shapes, can isolate the erosion medium, protect the surface of the substrate not easy to be worn, abrased, scratched, meanwhile, moisture-proof, rust-proof, corrosion â??proof, improve the commodity value of coated products. Upon completion of the protection period, the film can be conveniently removed to restore the original appearance of the object. Physical Property ModelPU-3018ACompositionPolyurethane organosilicon copolymerAppearanceMilky liquid with blue shadeSolid content35�±2%PH7.1-8.0IonicityAnionViscosity (Brookfield 25â??)50-160mpa.s Performance Features High peeling strength, not easy to break High strength, good water resistance Excellent low temperature resistance, weather resistance, air permeability and moisture resistance, and universality of different substrates Applications All kinds of metal surface, for example, temporary protection of products such as automobiles and stainless steel appliances Temporary protection of all kinds of glass products Temporary protection of all kinds of plastic products Can be used as temporary protection for coating, ink coating Can be used as temporary protection for other products Application Guide Can be directly painted on the surface of the construction surface, or add the right amount of water after dilution Can be added talc, silica and other inorganic split materials Can also add resin-free pigment paste to do color temporary protection coating The peelable film dry completely, when it needs to be removed, please tear out a long mouth along the edge of the film, and then slowly peel the film from the coated surface with a force of about 4-5kg Packaging and Storage Condition 50KG, 120KG, 200KG plastic drum; Stored in a 100% light â??proof sealed container; Stored in a cool and dry place indoor at 5-30â??; Under high temperature or exposure, the shelf life will be significantly shortened; Shelf life is 12 months from the date of production under condition that the drum is not opened. Special Tips This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.