FluonETFE Series Fluon ETFE is a tough fluoropolymer that has chemical resistance and electrical properties comparable to typical fluoropolymers, such as PTFE, PFA and FEP but performs better than ECTFE or PVdF because of its improved mechanical strength and moldability. Fluon ETFE Usage: Wire and cable Tubing Linings and coatings Other Fluon ETFE Grade List: Pellet Grade Melt Flow Rate* Features Molding Methods and Applications C-55AP 5 - 7 General product Extrusion molding C-88AP 10 - 13 General product Extrusion molding C-55AXP 5 - 7 Resistant to stress cracking Extrusion molding, tube molding C-88AXP 10 - 13 Resistant to stress cracking Injection molding, electric wire coatings C-88AXMP 30 - 48 High fluidity Thin electric wires, thin-walled injection
NEOFLON PFA AP-Series NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom. It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins. Grades and Features of AP-Series Grades MFR (g/10 min.) Features AP-201 20 - 30 Superior in melt flowability. Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44). AP-202 65 - 80 Excellent melt flowability. Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52). AP-210 10 - 17 Good melt flowability. Suitable for injection molding. AP-230 1.5 - 2.5 Superior in stress crack resistance. Suitable for extrusion and transfer molding. AP-201SH 20 - 30 High purity grade. Superior in melt flowability. Suitable for complex shape articles. AP-211SH 10 - 17 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for joints and parts for pumps. AP-215SH 10 - 17 High purity grade. Suitable for injection molding. Suitable for joints and parts for pumps. AP-231SH 1.5 - 2.5 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for extrusion and transfer molding. AP-210AS 11 - 14 Anti-static grade. Suitable for injection molding. AP-230AS 1.5 - 3.0 Anti-static grade. Suitable for extrusion molding. AP-230ASL 1.0 - 2.5 Anti-static grade. Suitable for extrusion molding.
DuPont Chemours Teflon PFA 345/ 345 X Resins DuPont Teflon PFA 345 is a medium melt flow rate fluoroplastic resin available in pellet form. Compared with Teflon PFA 340, it offers increased flex life and greater resistance to environmental stress-cracking (Teflon PFA 345 offers a typical MIT folding endurance of 50,000* compared to 15,000 in Teflon PFA 340). Table 1 shows the typical property data for Teflon PFA 345. Typical Application Applications for DuPont Teflon PFA 345 include extruded tubing, wire and cable insulation, injection molded parts, and chemically resistant linings for bellows, valves, fittings, pipes, pumps, and other fluid-handling components. DuPont Chemours Teflon PFA other grade: Teflon PFA 340/ 340 X Teflon PFA 345/ 345 X Teflon PFA 350/ 350 X Teflon PFA 416HP Teflon PFA 440HPA Teflon PFA 440HPB Teflon PFA 445HP Teflon PFA 450HP Teflon PFA 451HP Teflon PFA 940HP Plus Teflon PFA 945HP Plus Teflon PFA 950HP Plus Teflon PFA 951HP Plus Teflon PFA 9724 Teflon PFA 9725 Teflon PFA 9738 Teflon PFAD 335D
NEOFLON FEP NP-Series NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene. FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA. Grades and Features of NP-Series Grades MFR (g/10 min.) Features NP-20 4.5 - 8.5 Suitable for general extrusion molding of wire coating, pipes, tubes and films. NP-30 2.0 - 3.5 Suitable for thick-walled wire coating and wire jacket. NP-101 21 - 27 Improved melt flowability. Best suited for high-speed wire coating such as LAN cable. NP-120 4 - 10 Stress crack resistance is improved from NP-20. Wide range of applications, from thin-walled to thick-walled wire coating. We can give discount according to order quantity.
NEOFLON FEP NP-Series NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene. FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA. Grades and Features of NP-Series Grades MFR (g/10 min.) Features NP-20 4.5 - 8.5 Suitable for general extrusion molding of wire coating, pipes, tubes and films. NP-30 2.0 - 3.5 Suitable for thick-walled wire coating and wire jacket. NP-101 21 - 27 Improved melt flowability. Best suited for high-speed wire coating such as LAN cable. NP-120 4 - 10 Stress crack resistance is improved from NP-20. Wide range of applications, from thin-walled to thick-walled wire coating. We can give discount according to order quantity.
Transparent polyetherimide (Tg 247 degC). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230 degC (SABIC Innovative Plastics method). ULTEM PEI A Resin that Takes the Heat PEI SABIC ULTEM 1000 / 1000E / 1000F / 1000P / 1000R / 1000RV / 1010 / 1010F / 1010M / 1010P / 1010R / 1100 / 1100F / 1285 PEI+10% Glass fiber filled, SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled, SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled, SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled, SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452 The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. We can give discount according to order quantity.
ULTEM PEI A Resin that Takes the Heat PEI SABIC ULTEM 1000 / 1000E / 1000F / 1000P / 1000R / 1000RV / 1010 / 1010F / 1010M / 1010P / 1010R / 1100 / 1100F / 1285 PEI+10% Glass fiber filled, SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled, SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled, SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled, SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452 The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. We can give discount according to order quantity.
Zytel 70G20HSL BK039B is a 20% glass fibrereinforced, heat stabilised, lubricated polyamide 66 for injection molding. Zytel 70G25HSL BK039B is a 25% Glass Reinforced, Heat Stabilized, Polyamide 66. Zytel 70G25HSL NC010 is a heat-stabilized, 25% glass fiber reinforced polyamide 66 grade withlubricants and release agent. Exhibits high mechanical strength, excellent balance of stiffness & toughness, good high temperature performance, good electrical as well as flammability properties.
DuPont Elvamid nylon multipolymer resins are a family of unique polymers havingoutstanding abrasion resistance, high tensile strength and elongation, and excellentadhesion to nylon yarns.
Technical index 1.Solvent-free acrylic powder (not contain any solvent) 2. Type: Non-Cross-linked Copolymer 3. VOC (Residual monomer) < 1000ppm 4. Particle Size (Average) : 20 ï½? 100 �¼m 5. Water content < 2% 6. Bulk density : 0.2 ï½? 0.6 g/cm3 Applications Additives for Cosmetics Improve skin feeling, flow characteristics, matte finish and optical blurring of wrinkles. May be used for lotion, cream and other essence such as in skin care products, sun care products, and make-up products. Recommended loading is around 1% ~ 5% depending on particular formulations. Additives for Painting oil and ink Matting agent, finish appearance enhancement agent and light diffusion agent. Also improve scratch resistance, and provide better feeling. Additives for Film and Coating May function as anti-blocking agent when applied in polyolefin, PET and other films. Particles do not scratch and damage the films surface due to spherical shapes, and do not hinder light transmissions through films due to its highly transparent nature. Additives for Others aspects May be used as evaporative pore-forming agent or evaporative binder for ceramic moldings; May be used as release improver for binder, fluid visualizing agent or adsorbent. The material for base of denture Additive and materials for 3D printing
TROGAMID T and BX consist of terephthalic acid and 2,2,4- /2,4,4-trimethyl hexamethylene diamine, a chemical composition that is responsible for their amorphous structure. This makes TROGAMID T transparent in contrast to the semi-crystalline high-performance plastics of High Performance Polymers. The amorphous structure also results in low molding shrinkage and low tendency to warp. In addition to the basic products, a range of specially equipped compounds is also available. The product line fits a wide range of applications and satisfies many requirement profiles.
TROGAMID T and BX consist of terephthalic acid and 2,2,4- /2,4,4-trimethyl hexamethylene diamine, a chemical composition that is responsible for their amorphous structure. This makes TROGAMID T transparent in contrast to the semi-crystalline high-performance plastics of High Performance Polymers. The amorphous structure also results in low molding shrinkage and low tendency to warp. In addition to the basic products, a range of specially equipped compounds is also available. The product line fits a wide range of applications and satisfies many requirement profiles.
Property: Sp1126 dispersible emulsion powder for water soluble and disperse latex powder, chooses import of vae emulsion spray drying, vinyl acetate - ethylene copolymer powder, polyvinyl alcohol as protective colloid.After dealing with spray drying.High ethylene content, good flexibility, and all kinds of basic material has better adhesion. Sp1126 particularly applicable to inorganic adhesive, such as cement, ash calcium powder, plaster mix or separate binding material, compared with the emulsion powder on the market, has the added quantity is little, the cost is low, the advantages of stable quality. Recommended use: Interior and external wall putty, all kinds of functional powder putty, tile adhesive mortar, slushed joint, adhesive plaster, gypsum plaster;â â External thermal insulation mortar, binding mortar, tile adhesive mortar and interface, all kinds of functional mortar. Applications: After adding sp1126 powder modified mortar under the hydration has the following features: (1) increase the adhesion mortar and grassroots, good alkali resistance. (2) increase the compressive strength of mortar, and longer opening hours. Specification: ApperanceWhite powder Solid content Ph 5-8 Glass transition temperature tg)About 5 Minimumâ filmâ formationâ temperature Validity180 days Package25kg bag Storageâ condition Cool dry place Packing: 25 kg/bag. Storage: cool and dry place. Warranty: 180 days, such as more than without aggregation can still continue to use the shelf life of products
Cas:10882-76-0 Trade name mome Chemical class aqueous cationic polymer Assay 40% Appearance brown red liquid Ph value 6-8 Water solubility quite soluble in water Application primarily used as brightener and carrier for alkaline cyanide andcyanide-free zinc plating. Usually combining with bpc 48/34
Cationic polyacrylamide is a water soluble polymer polyelectrolyte, non-toxic, odorless, easy to absorb moisture, soluble in water, not soluble in ethanol, acetone and other organic solvents. Molecular chain of this product has a good stretch performance and this product has good elasticity, stable relative molecular mass, uniform charge distribution, rapid in generating flocculation, rapid separation speed, compact flocculation, high strength and good dehydration.
PVDF FR906 is a white pellet of polyvinylidene fluoride homopolymer with low viscosity,which can be well fabricated into products by injection. Made from virgin PVDF FR906,properly processed PVDF fabricated products provide good mechanical properties,toughness, and highly resistance to acid,alkali,oxidant and halogen at room temperature. The porous film is stable to aliphatic hydrocarbon, aromatic hydrocarbon,alcohol and aldehyde.At at temperature above100 C, it shows high resistance to hydrochloric acid,sulfuric acid, nitric acid and alkaline with concentration below 40wt% in water. It is also stable to radiation and most bad environmental conditions, which lead to excellent performance for the long term. PVDF resin is mainly used in chemical equipment, electronic and electrical coatings and architectural coatings. In addition, because of its unique piezoelectric and thermoelectric properties, PVDF resin as a novel electrical functional material has become a hot spot in application research in recent years.
SteelHome Express: Quotation of Imported Iron Ore in Tangshan Edges down Quotation of imported iron ore on Tangshan market drops by around 5 yuan/t on Tuesday. Then the prevailing quotation on the market: PB fines is 660-665 yuan/t; PB lump is 845-850 yuan/t; Jimblebar fines is 595-600 yuan/t; Super Special fines is 530-535 yuan/t; Brazilian IOCJ is 795-805 yuan/t. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
PE100 suitable for pipe
EX3 - high density poly ethylene Packaging 25 ,50 kg bag and 1 ton jumbo bag
Medium density poly ethylene 3802 pallet grade and contains antioxidants
