FluonETFE Series
Fluon ETFE is a tough fluoropolymer that has chemical resistance and electrical properties comparable to typical fluoropolymers, such as PTFE, PFA and FEP but performs better than ECTFE or PVdF because of its improved mechanical strength and moldability.
Fluon ETFE Usage:
Wire and cable
Tubing
Linings and coatings
Other Fluon ETFE Grade List:
Pellet
Grade Melt Flow Rate* Features Molding Methods and Applications
C-55AP 5 - 7 General product Extrusion molding
C-88AP 10 - 13 General product Extrusion molding
C-55AXP 5 - 7 Resistant to stress cracking Extrusion molding, tube molding
C-88AXP 10 - 13 Resistant to stress cracking Injection molding, electric wire coatings
C-88AXMP 30 - 48 High fluidity Thin electric wires, thin-walled injection
NEOFLON ETFE is a copolymer of tetrafluoroethylene and ethylene, and has the lowest specific gravity among all fluoropolymers. It has superior characteristics in melt processability and mechanical properties compared with PTFE and FEP, and has good electrical and chemical properties. It is suitable for applications requiring its mechanical toughness, chemical resistance, heat resistance and electrical properties.
LNP THERMOCOMP 2F004/ FP-EF-1004 compound LNP FP-EF-1004 is a fluoropolymer compound based on ETFE resin containing 20% Glass Fiber. Also known as: LNP* THERMOCOMP* Compound FP-EF-1004 Product reorder name: 2F004 SABIC LNP ETFE + Glass Fiber Series LNP THERMOCOMP 2F004 +20% Glass Fiber LNP THERMOCOMP 2F005 + 25% Glass Fiber LNP THERMOCOMP 2F006 + 30% Glass Fiber LNP THERMOCOMP 2FL24 + 20% Glass Fiber + 10% PTFE We can give discount according to order quantity.
Supplier: Fluoropolymer resin pvdf, pfa, fep, etfe, ptfe
Product Description PVDF resin, a polyvinylidene fluoride polymer prepared by an emulsion process. Its high purity, with excellent chemical corrosion resistance, oxidation resistance, radiation resistance, and good mechanical properties, is suitable for architecture-grade film application and to be molded into pipe fittings, pumps and valves, and other parts of various specifications. Density g/cm3 1.77-1.79 Water content Wt% 0.10 Durometer hardness Shore D 74 80 MFR230 5kg g/10min 626 Tensile breaking strength 25 Elongation at break % 20 Tensile Strength, Yield 25 Elongation at Yield % 10 Melting Point 165 170 Thermal decomposition temperature 370
ETFE is a fluoropolymer that is chemically and structurally similar to polyolefins (such as polyethylene) and therefore has higher wear resistance, impact resistance and crushing resistance than its perfluorinated (perfluoropolymer) counterparts -PTFE, FEP and PFA. ETFE tubes are commonly used in wire harnesses, outer film applications that require weather resistance, and tank linings that require special chemical and wear resistance. Its high tensile strength at 25 ° C also leads to higher operating pressures at that temperature.
Everflon is a registered trademark of the C&F Group for its fluoropolymer resins.Everflon PTFE fluoropolymer resins are part of the C&F family of fluorine-based products that also includes Everflon FEPEverflon ETFE and verflontm PFA fluoropolymer resins and Everflontm PVDF fluoropolymers.These materials can be used to make a variety of articles having a combination of mechanical, electrical, chemical, temperature, and friction-resisting properties unmatched by articles made of any other material. Commercial use of these and other valuable properties combined in one material has established Everflontn resins as outstanding engineering materials for use in many industrial and military applications Everflon resins may also be compounded with fillers or reinforcing agents to modify their performance in use. The design and engineering data presented in this handbook are intended to assist the design engineer in determining where and how Everflontn resins may best beused. lt is recommended that the design engineer work closely with an experienced fabrica tor because the method of fabrication may markedly affect not only production costs, but also the properties of the finished article.
ETFE Material Poly tetra fluoro ethylene, the full name of etfe ethylene tetrafluoroethylene, is one of the strongest fluor plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluoropolymer material, the poly ethylene tetrafluoroethylene also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials. Types of ETFE/Poly Ethylene Tetrafluoroethylene for Sale ETFE Powder ETFE Resin ETFE Primer ETFE: Revolutionizing Architectural Design with Translucent Structures ETFE (Ethylene Tetrafluoroethylene) is indeed revolutionizing architectural design, particularly with its application in creating translucent structures. This high-performance fluoropolymer is known for its exceptional properties, making it a popular choice in modern architecture. Key Properties are: Transparency and Light Transmission, Lightweight, Durability and Strength, Flexibility, Self-Cleaning, Sustainability. The use of poly ethylene tetrafluoroethylene in architecture is expected to grow as more architects and builders recognize its benefits. Advances in manufacturing and installation techniques will likely make etfe teflon even more accessible and versatile, paving the way for more innovative and sustainable architectural designs.
