Mome(Aqueous Cationic Polymer)

Supplier: Industrial chemicals likes tetra sulpho optical brightener and di sulpho optical brighteners for pulp and paper, caustic soda flakes / sodium hydroxide, caustic soda lye, asa sizing agent, akd sizing agent, wet strength resin agent / dry strength resin (polyamido polyamine epichlorohydrin resin with a high% of solids 25 35%), sae anionic for sizing agent (butyl acrylate styrene polymer 24 26%), sae cationic for sizing agent (copolymer n [3 (dimethylamino) propyl] methacrylamide / styrene ]]) for paper industry, fluorescent brightening agents, optical brighteners for paper, fluorescent whitening agents, optical brightener, carbomer, carbopol, polyaluminium chloride, carbon brushes and brush holders, pp granules, plastic granules and many more.

Super Absorbent Polymer, also called SAP, is a hydrophilic polymer with a three-dimensional network that is capable of absorbing and maintaining high amount of water and aqueous solutions even if pressurized. In general, super absorbent is a dry and typically sugar-like material with the ability to absorb water and some soluble substances more than several times its own weight For price, specification and other details please contact us

1. Product name: AKD High Polymer Emulsifier 2. Product introduction: AKD high polymer emulsifier (instead of traditional cationic starch based) is a kind of cationic polymer product developed by our technical department,which is the initiative developed product in the market.It can not only emulsify AKD wax,but also proteched the AKD colloid dispersion and aid retention,it also can increase AKD sizing efficiency(2%-8%).It can get the high stability and better fixing effect AKD emulsion by mechanical stirring,in the meantime it greatly decrease AKD hygrolysis during storage and sizing process.Final AKD Emulsion shelf time is about 6 months which is longer than starch emulsified AKD emulsion.The final AKD Emulsion also has quicker curing effect. 3.Specification and Index: Item Specification Appearance light yellow viscosity liquid Solid content 40%min Viscosity,mPa.s,25�°C 2000-10000 mPa.s pH value 2-5 shelf life 6 months 4. Application: This Emulsifier greatly restricts the AKD hydrolysis and the migration aptitude.It can replace the starch based emulsifier and AKD curing agent,at the same time decrease the AKD WAX using quantity.The final AKD Emulsion by this high polymer emulsifier can realize 80% sizing effect after paper machine,and almost totally realize after rewinding,which can let the paper immediately get the good water resistance effect,so less surface sizing agent in size press can fulfill all the sizing requirement.For detail using method,please contact Greatland Chemicals Co.,Ltd. 5. Package and storage: It should be stored in the warehouse with dry and cool condition protected from frozen and sunlight directly. The temperature should be below 30 C. Packing with 200kg, 1000kg/drum.

Supplier: Oil field chemicals, mineral exploration drilling chemicals, partially hydrolyzed polyacrylamide(phpa), polyacrylates, polyelectrolytes, viscosifiers for wbm & obm, defoamers, eco friendly defoamer, foaming agent, sulphonated asphalt, deflocculantes, despersants, demulsifier, wax inhibitor, asphaltene inhibitor, antifouling agent, corrosion inhibitors, flocculants, coagulants, de oiler, anionic, nonionic, cationic polymers, waste water treatment chemicals, super absorbent polymer,monomers and polymers
Buyer: Cellophane flakes

Cationic polyacrylamide is a water soluble polymer polyelectrolyte, non-toxic, odorless, easy to absorb moisture, soluble in water, not soluble in ethanol, acetone and other organic solvents. Molecular chain of this product has a good stretch performance and this product has good elasticity, stable relative molecular mass, uniform charge distribution, rapid in generating flocculation, rapid separation speed, compact flocculation, high strength and good dehydration.

Alsta Agriculture Hydrogel Polymer is a polyacrylate-based super absorbent polymer for use as a water-retaining agent in drought-prone areas. Non-toxic, bio-degradable with no residues around, and operational life of over five years. This polymer has a super absorbent capacity and swells quickly to a larger degree. It absorbs aqueous solutions and soluble plant nutrients with the help of hydrogen bonds of water molecules. It absorbs water up to 400 - 500 times its own weight and releases water during the dry condition, influencing soil permeability, texture, and evaporation rate. Superabsorbent Polymers are also used in many other industries like the cable industry, food industry, and the green industry including agriculture, horticulture, landscaping, and forestry activities.

Everflon Fluoropolymer PTFE Fine Powder Everflon® PTFE Fine Powder is soft, white polymers that are produced from PTFE aqueous dispersions. These fine powders possess the lowest coefficient of friction, the highest heat resistance, chemical resistance, electrical properties, and non-sticking properties of all fluoropolymers. It is uniquely capable of being sheared by lubricated paste extrusion into a coherent fibrous matrix with useful structural integrity.

Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes Processing suggestion PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.