APP modified membrane
RO Membrane GPD: 75/80/100/300/4021/4040/8040 works upto TDS : 1000/2000/3000/5000 Good Quality,High Flow
Cellular Confinement System {Geocell} is a three-dimensional lightweight and flexible material made from blends of polyethylene strips, ultrasonically bonded to form a shape of honeycomb
SUNANDA Poly alk WP (Waterproofing_5 KG) Features & Benefits POLYALK WP is a most effective and proven acrylic polymeric waterproofing solution. Can be applied in moist and damp conditions For Example - exteriors, terraces, and Chajjas in wet spells of monsoon, underground and/or overhead water tanks almost immediately after emptying High flexural strength and extraordinary adhesion of polymer reinforces the high compressive strength property of cementations matrix Alkaline and compatible with concrete.
Roof Basement Waterproof Material Pvc Membrane Description: PVC membrane roll is an excellent high-quality polymer waterproof sheet, made of PVC resin by adding plasticizer, anti-UV agent, anti aging agent, and stabilizer and other processing aids through extrusion and molding. As the highly-recommended product by the Ministry of Construction, it is featured by high tensile strength, great elongation, good stability, small shrinkage, low-temperature performances, good resistance to weathering and root penetration, and long service life. Specifications: Product name PVC roof sheet waterproof membrane with UV protection Brand MINGDING Thickness 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm Width 1.05m, 2.05m, 2.1m Length 20m or customized Type H type, L type, P type Property: Strong tensile strength, high elongation, good dimensional stability after heat treatment. 2)Excellent flexibility at low temperature, excellent resistance to the low and high temperature. 3)Excellent resistance to impact and perforation. 4)Excellent resistance to chemical etching. 5)Fireproof : the membrane extinguish immediately after away from the fire source. 6)Easy and fast construction without pollution. 7)Excellent resistance to the aging, long service life. Service life: more than 20 years as roof waterproof material, more than 50years if used in underground waterproof . 8)Repair project: Repair the damage place only and reduce the repair cost. 9)Various colors are available.
Waterborne Polyurethane waterproof coating Polyurethane waterproof coatings can be divided into one-component and two-component. One-component polyurethane waterproof coating, also known as moisture-curing polyurethane waterproof coating, is a reactive moisture-curing film-forming waterproof coating. It is applied to the waterproof base layer during use and is cured to cross link into a tough, soft and seamless rubber waterproofing membrane by reacting with moisture in the air. High-strength polyurethane waterproof coating is a two-component reactive curing waterproof coating. High-strength polyurethane waterproof coating Two-component chemical reaction-cured isocyanate-terminated prepolymer obtained by polycondensation of polyether and acid. Component B is composed of plasticizer, curing agent, thickener, accelerator, and filler. Composition of colored liquids. When used, the two components of A and B are uniformly mixed in proportion, coated on the surface of the waterproof base layer, and often cured by temperature cross linking to form a rubber elastic film with high elasticity, high strength and durability, thereby waterproofing. The waterborne polyurethane waterproof coating generally refers to the one-component polyurethane waterproof coating, and the oily refers to the two-component polyurethane waterproof coating; in comparison, the water performance is almost the same, the price is also cheaper, the most important thing to look at the use environment! However, waterborne polyurethane waterproof coatings are more environmentally friendly.
As two-component polymer water-borne waterproofing coating, it uses high quality polymer emulsion and cement as main raw materials with various inorganic materials and auxiliaries.. Advantage: 1. Strong adhesion. 2. Strong water resistance. 3. Excellent crack resistance. 4. Suitable for multiple environments. 5. Eco friendly. Application: Roof, wall, kitchen, bathroom, balcony, terrace and other non-exposed waterproofing projects. Reference dosage: 1.0-1.4kg/sqm for 1mm coating Specification: 25kg/barrel (emulsion) & 20kg/bag (powder)
It is made of high elastic silicone fluororubber, styrene butadiene, modified emulsified bitumen and acrylic acid. Advantage: 1. Easy construction and excellent overall waterproof effect. 2. Substitute of SBS/PVC waterproofing membrane. 3. Strong bonding property. 4. Eco friendly. Application: Roof, wall, basement, balcony, kitchen and bathroom of various buildings. Reference dosage: 1.2-1.6kg/sqm for 1mm coating Specification: 20kg/barrel
It is a reactive flexible waterproofing coating with isocyanate and polyether as main raw materials and various additives. Advantage: 1. Single component for convenient construction. 2. Long lasting waterproof without addition and emission. 3. Good film extension and high tensile strength. 4. Excellent weather resistance. 5. Eco friendly. Application: Roof, exterior wall, basement, balcony, kitchen and bathroom of various buildings. Reference dosage: 1.3-1.5kg/sqm for 1mm coating Specification: 25kg/barrel
It consists of polymer sheet, polymer hot melt pressure sensitive adhesive layer and isolation film. Advantage: 1. High tensile strength and high elongation. 2. Small size change rate. 3. Good low temperature flexibility. 4. Resistant to plant root penetration. 5. Eco friendly. Application: Basement, roof, air defense, pipe gallery and tunnel. Specification: 1. Thickness: 1.2/1.5/1.8mm 2. Width: 1000/2000mm 3. Length: 20m
Based on SBS modified bitumen waterproofing membrane, it uses butyl and butylbenzene as the self-adhesive material. Advantage: 1. Convenient construction due to cold application. 2. Excellent adhesion to the base. 3. High tensile strength and elongation. 4. Excellent tear and weather resistance. Application: Roof and basement of industrial and civil buildings, municipal engineering, reservoir and swimming pool. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10m
It uses EPDM rubber resin as the main raw material with vulcanizing agent, accelerator, softener and reinforcing agent. It is suitable for waterproofing projects in a variety of complex environment. Advantage: 1. Easy construction and excellent overall waterproof effect. 2. Strong bonding property. 3. Good solderability and plasticity. 4. Eco friendly. Application: Basement, wall and roof of industrial and civil buildings. Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 1000/2000mm 3. Length: 20m
It uses HDPE as the main raw materials with various additives. Advantage: 1. Excellent flexibility, impermeability and elongation. 2. Good isolation and penetration resistance. 3. Resistant to acid and alkali. 4. Eco friendly. Application: Basement, roof, tunnel, subway, reservoir dam, landfill and sewage plant. â??Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 2000mm 3. Length: 20m
It uses polypropylene and rubber as the main raw material with various anti-oxidants, anti-aging and anti-UV additives. Advantage: 1. Excellent weather resistance, aging resistance, high tensile strength and elongation. 2. Wide temperature range from-40â?? to 100â??. 3. Good solderability and plasticity. 4. Eco friendly. Application: Basement, tunnel, grain depot, subway, reservoir, exposed roof, planted roof and driving roof. Specification: 1. Thickness: 1.2/1.5/1.8/2.0mm 2. Width: 2000mm 3. Length: 20m
It uses PVC resin as the main raw material with a variety of special additives and anti-aging agents. Advantage: 1. High compressive strength, high elongation and small size change in heat treatment. 2. Good low temperature flexibility. 3. The lap side can be welded with high strength. 4. Chemical resistance. 5. Good plasticity. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 1000/2000mm 3. Length: 20m
It uses high-quality butimen with SBS thermoplastic elastomer as modification additive and prepared by special technology. There is reinforcment in the middle and covered with various surface materials. Advantage: 1. Excellent low temperature resistance. 2. High tensile strength and elongation. 3. Excellent tear, corrosion and weather resistance. 4. Hot melt construction with reliable and durable seams. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10/15m
1.Top-fast Manufacturer for Membrane Switch ( 48H) & Graphic Overlay (24h) 2.Waterproof rating up to IP66 3.Free Graphic Design 4.Free DHL shipping & Free Paypal Fee Get a quote online: https://www.jrpanel.com/R The first order is free, and only costs $30 for shipping!Samples only (within 5 pieces) For new customer, there is an $20 New Welcome Coupons, that it can be directly used for the order on JRPanel. Also, we are now Free DHL shipping & Free Paypal costs. which is a good activity for cutsomers. contact by
This type of membrane switch uses silver paste as the upper circuit layer of the switch. By pressing, the center of the silver paste point is connected to the lower circuit to realize the conduction and trigger signal. Through the "die-pressing" , the silver paste disk of the button of the upper circuit is pressed into a certain spherical crown shape with a mold, and a certain elasticity is generated, so that the button can rebound when pressed, and the circuit is turned on or off. It is also obvious enough to feel the switch closed. Bumping of silver paste requires the use of molds, especially batch orders, and the need to customize the bumping molds can greatly improve the production efficiency and the stability of product quality. The die-pressing silver pad can be designed to be 5mm-11mm, and the recommended size is 8-10mm. The button size will be more suitable for finger pressing.
PET Long fiber geotextile was made from virgin polyester chips, the continous filament was extruded from polyester chip by machine directly by spunbond process. Pet Long Fiber Nonwoven Geotextile punch together to get the stable 3D with highter strength fabric . so Nonwoven Geotextile Fiber has high strength , good creep property excellent and erosion resistance, aging-resistance and heat resistance. unit weight 100g-800g/sqm
Geomembrane is a very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project, structure, or system. The Geomembrane specifications: 1.Thickness range:0.2-3mm 2.Width range:1-8m; 3.Length: customized; 4.Color: black mainly, green, blue, white; 5.Surface: smooth surface, textured surface. The Geomembrane Features: 1.Waterproof and impermeable 2.UV resistance(black color) 2.High tearing resistance 3.Puncture-resisting 4.Nontoxic 5.Long life 6.Root resistance The geomembrane application: 1.Aquaculture projects: fish ponds, shrimp ponds, industrialized aquaculture ponds, etc. 2.Environmental protection projects: Landfill, sewage treatment plants, power plant regulating pools, industrial and hospital solid wastes, etc. 3.Agriculture: Seepage control of reservoirs, water reservoirs, irrigation systems, canals, etc. 4.Mining: heap leaching platforms, conduit, and retention channels and wells for liquid solutions, final disposal reservoirs. 5.Oil&gas:fresh water liner,pit liner,flow-back water pond liner,oild containment etc. 6.golf-course,coal ash,animal waste,solar&pumped storage ponds etc.