Please click here to check who's online and chat with them.

Super-Phobic Membrane Contactor - G638

(1.1)
Supplier From Indonesia
May-22-23

Super-Phobic Membrane Contactor - G638
This Membrane Contactor is suitable for Protieus JET RR Donnelley printers. This is the part (number G638).

Membrane Characteristics:

Cartridge Configuration: No Baffle Radial Flow
Liquid Flow Guidelines 100 ml/min 1 liter/min (Liquid must flow on the shellside)
Membrane/Potting Material UP-I Polyolefin / Polyethylene
Typical Membrane Surface Area: 0.3 m2
Shellside: 77 ml
Solvent fluids

Housing Characteristics:

Material: Polyethylene
Shellside(Liquid Inlet/Outlet) : 1/4 inch NPT Female
Lumenside (vacuum) : 1/4 inch NPT Female
Weight: 140gr (Dry), 220g (liquid full)
Printer compatibility : RR Donnelley Protieus JET

Price and Minimum Quantity

Price: $300
MOQ: Not Specified
File a complaint
Rate This Member
Supplier Of Waterproofing Material

Recent User Reviews

This user has not received any reviews yet!

Verification Status

 
 
Contact Supplier
Renew

More Items Similiar to: Super-Phobic Membrane Contactor - G638

GOLD Member
VERIFIED
Nov-29-21
(4.6)
Buyer From Dubai, United Arab Emirates

Supplier: Soda ash, urea 46 fertilizers, adblue, lead ingots, lead powder, npk fertilizers, rock phosphate, gypsum, base oil, white spirit, potassium chloride kcl, ammonium nitrate, ammonium sulphate, caustic soda, , triple super phosphate (tsp), potassium chloride (mop), diammonium phosphate (dap), sulphate of potash (sop), commercial epsom salt (ces), melamine, urea melamine formaldehyde, urea formaldehyde concentrate 85%, para formaldehyde 96%., iron ore
Services: General trading in raw materials, supply chain, contracting.
Buyer: Chemicals, petrochemicals

Buyer Of Industrial Chemicals   |   Petrochemicals
Service Provider Of Logistic Services   |   Trade Promotion Services

Supplier Of Waterproofing Material   |   Sulphur   |   Potassium Chloride   |   Industrial Chemicals   |   Caustic Soda   |   Chemical Salts   |   Soda Ash   |   Zinc Sulphate   |   Iron Ore   |   Gypsum   |   Phosphate Rock   |   Bitumen, Asphalt   |   Wheat   |   Corn   |   Fertilizers   |   Urea   |   DAP (Diammonium Phosphate)   |   NPK   |   Flour   |   Wheat Flour   |   Sunflower Oil
GOLD Member
VERIFIED
Feb-07-20
(4.6)
Supplier From Ahmedabad, Gujarat, India

Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,

Supplier Of Primer Paint   |   Clay Bricks   |   Clay   |   Tiles   |   Construction Chemicals   |   Bricks   |   Refractory Bricks   |   Cement
GOLD Member
VERIFIED
Jun-05-21
Phoscast 90xr & Phoscast 60xr

Phoscast 90Xr & Phoscast 60Xr

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Builder's Hardware, Construction Material & Equipment
 
* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
GOLD Member
VERIFIED
Jun-01-21
Sk-hb K-silicate Mortar & Solution

Sk-Hb K-Silicate Mortar & Solution

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Construction Chemicals
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
VERIFIED
Jun-01-21
Furan Powder And Syrup Solution

Furan Powder And Syrup Solution

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Construction Chemicals
 
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
GOLD Member
VERIFIED
Jun-01-21
Acid Resistant Tiles

Acid Resistant Tiles

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Blocks, Tiles & Slabs
 
Acid / Alkali Resistant Tiles/Bricks

* Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7.

* The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives).

Corrosion Protection Applications
* Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents
* Pickling tank and surrounding areas
* Food & Beverage Industry flooring
* Battery rooms and Control rooms
* Demineralization plants
* Walls of washing and Paint shop areas
* Acid Resistant Tiles Manufacturers India
* Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
GOLD Member
VERIFIED
Apr-07-25
Super Combo 2k Base And Hardener

Super Combo 2K Base And Hardener, Dubai Grade

(3.9)
$1 - $2 / Liter (EXW)
MOQ: Not Specified
  Goods Exim International
Supplier From Dubai, India
Supplier Of Paints & Coatings
 
RAP 2K Autocryl
A 2K (two-component) high build topcoat based on acrylic polyol and aliphatic isocyanate.

Key Features:
Excellent durability
Weather resistant
High gloss and color retention
Good chemical resistance
Scratch and Impact resistant
Quick curing when used with RAP hardeners (ARP010 HS Fast Hardener, ARP011 - HS Slow Hardener) and thinners, to produce high gloss topcoats with durable finish, suitable for any type of car repair work
GOLD Member
VERIFIED
Feb-23-22
Powder Coating

Powder Coating, A

(3.9)
$1 - $2 / Carton (EXW)
MOQ: 1  Boxes
Sample Available
  Goods Exim International
Supplier From Dubai, India
Supplier Of Paints & Coatings
 
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries

Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing
GOLD Member
VERIFIED
Sep-10-24
High Quality Stainless Steel 201 Honey Tank

High Quality Stainless Steel 201 Honey Tank

(3.8)
Ask for price
MOQ: Not Specified
  Henan Super-sweet Biotechnology Co., Ltd
Supplier From Zhengzhou, Henan, China
Supplier Of Storage Tanks
 
high quality stainless steel 201 honey tank with cover and valve 25kg

Basic Information
Place of Origin:
CHINA
Brand Name:
Super-Sweet
Certification:
ISO
Model Number:
HB
Minimum Order Quantity:
1
Price:
12-45kgs
Packaging Details:
25 kg honey tank Standard Packing: 1pcs/carton Size: 34*33*33cm GW: 8kg
Delivery Time:
Shipped in 5 days after payment
Payment Terms:
T/T, Western Union, MoneyGram, D/P, L/C
Supply Ability:
5000 Piece/Pieces per Month 25 kg honey tank
Search More Like "Super-Phobic Membrane Contactor - G638"

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com