Please click here to check who's online and chat with them.

Water Proof Composite Board

(1.1)
Supplier From India
Oct-28-21

E3 WPC-Water Proof Composite Sheets is also known as PVC boards is a result of extensive research and search for a product that is a complete replacement of plywood where waterproof & Termite proof properties are required. E3 Boards are a combination of world-class machinery and good quality raw materials. These boards can be used in exterior as well as interior applications. Another advantage of these boards is that they can be used/cut/processed/laminated etc. Just like traditional plywood.

All E3 WPC Boards are 100% replacement of plywood and can be used in all types of household & office furniture. The customer has to select the product according to their usage.

File a complaint
Rate This Member
Supplier Of Waterproofing Material

Recent User Reviews

This user has not received any reviews yet!

Verification Status

 
 
Contact Supplier
Renew
 Add to Favorites

More Items Similiar to: Water Proof Composite Board

GOLD Member
VERIFIED
Feb-07-20
(4.6)
Supplier From Ahmedabad, Gujarat, India

Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,

Supplier Of Construction Chemicals   |   Bricks   |   Refractory Bricks   |   Cement   |   Tiles   |   Clay   |   Primer Paint   |   Clay Bricks
GOLD Member
May-18-19
(3.2)
Supplier From Pune, Maharashtra, India

Supplier: Solvent distillation plant , ethanol distillation plant , etp, water treatment plant , effluent treatment plant, evaporator , dryer, zld plant, lab equipment supplier, lab chemical supplier, industrial equipment , storage tank , bulk tank, petrochemical plant, ethyl acetate distillation plant, supplier of chemicals, reactor , pressure vessel , instruments, plc panel ,dcs panel, mcc panel , steam boiler, agitator tank, mixing tank, blending tank, bottling plant , vodka plant , ena distillation plant , fermentation plant , cooking plant, cpu plant, dg set, dpr report. etc, industrial dryer, industrial storage tanks, lab equipment, bio cng plant, biogas plant, bioreactor, sludge settling tank, wash settling tanks, pre fermenters, culture vessel, blender, blending tank, agitator, mixing tank, shell and tube heat exchanger, reboiler, reactor, mcc electrical panel, pressure vessel, evaporator, industrial dryer, beer plant, brewery plant, ethanol distillery , grain alcohol distiller plant

Supplier Of Electric Panels & Switch Boards   |   Food Processing Machinery   |   Breweries & Distillery Machinery   |   Heat Exchangers   |   Industrial Heaters, Burners, Furnaces & Ovens   |   Pressure Vessels   |   Laboratory Equipments & Instruments   |   Electric Reactors   |   Diesel Generators   |   Industrial Machinery & Plants   |   Water Filters, Water Treatment Plants   |   Laboratory Reagents   |   Industrial Goods & Supplies   |   Beverages Machinery   |   Storage Tanks
SILVER Member
Sep-10-24
Pipes And Fittings

Pipes And Fittings

(1.0)
$0.50
MOQ: Not Specified
  Huizhou Yulan Technology Co., Ltd.
Supplier From Huizhou, Guangdong, China
Supplier Of Plumbing - Pipes, Fittings, Flanges, Elbows & Hoses
 
We are mainly for customers to provide a variety of pipelines. The pipes we sell include plastic pipes, PVC pipes, HDPE pipes, LDPE pipes, PE pipes, PPR pipes, PC pipes, ABS pipes, PA pipes, PU pipes, hoses, soft tubes, all kinds of plastic granule materials, and recycled regrind materials. Gi pipes, stainless steel pipes, seamless pipes, MS pipes, carbon steel, composited pipes, water tubes, corrugated pipes, fittings, valves, flanges, nuts, and screws. And other environmental plastic and stainless steel pipes
for residential construction households. With meeting international standard quality, the pipes are of different thicknesses, lengths, and applications.
GOLD Member
VERIFIED
Jun-05-21
Phoscast 90xr & Phoscast 60xr

Phoscast 90Xr & Phoscast 60Xr

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Builder's Hardware, Construction Material & Equipment
 
* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
GOLD Member
VERIFIED
Jun-01-21
Sk-hb K-silicate Mortar & Solution

Sk-Hb K-Silicate Mortar & Solution

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Construction Chemicals
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
VERIFIED
Jun-01-21
Furan Powder And Syrup Solution

Furan Powder And Syrup Solution

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Construction Chemicals
 
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
GOLD Member
VERIFIED
Jun-01-21
Acid Resistant Tiles

Acid Resistant Tiles

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Blocks, Tiles & Slabs
 
Acid / Alkali Resistant Tiles/Bricks

* Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7.

* The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives).

Corrosion Protection Applications
* Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents
* Pickling tank and surrounding areas
* Food & Beverage Industry flooring
* Battery rooms and Control rooms
* Demineralization plants
* Walls of washing and Paint shop areas
* Acid Resistant Tiles Manufacturers India
* Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Jul-01-08
Moisture-proof and water-proof gypsum board

Moisture-Proof And Water-Proof Gypsum Board

(1.3)
Ask for price
MOQ: Not Specified
  Shandong Baier Building Materials Co., Ltd
Supplier From Linyi, Shandong, China
Supplier Of Construction Materials
 
Moisture-proof and water-proof gypsum board
GOLD Member
VERIFIED
Jun-28-24
Industry for Portland cement sale

Industry For Portland Cement Sale

(3.4)
$4.50
MOQ: 500  Pieces
Sample Available
  Rene Sadi
Supplier From Ontario, Canada
Supplier Of Cement
 
325 425 525 Portland cement



Specification

Sulfate Resistant Portland Cement SRPC also named Sulfate Resistant Cement SRC is one of hydraulic binding materials can resistance to sulfate ion attack

Type High Sulfate Resistant Cement PHSR and Moderate Sulfate Resistant Cement PMSR

Grade 325 425



Application

To make concrete of sulfate resistance marine concrete maritime works

To make cement boards precast cement products cement pipes precast concrete pile shop fabricated members

Sea water attack resistance projects for example sea wall dam mariculture project sea water desalination project oceanarium etc

Chemical resistant engineering concrete

To make sulfate resistant concrete engineering of harbor water conservancy underground tunnel drainage pipe diversion works road and bridge foundation etc
Search More Like "Water Proof Composite Board"

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com