Waterproof: PANZHU WRAP breathable membrane can reach the EU standard of European Union. The water-proof performance can bear two meters high water column for 24 hours. The water-proof performance is excellent Air tightness: PANZHU WRAP breathable membrane can reach the standard of use Permeability: Water vapour transmission of PANZHU WRAP breathable membrane reaches the international standards of 500 g / ã?¡. 24 h, equivalent to 29.2 of the U.S. perm, Canada's 1665ng/Pa/s/m². Durability: PANZHU WRAP breathable membrane is made of three layers.The upper and lower outer layers are protective layers, which helps the breathable membrane to have good tensile strength and anti-slip, so that it is suitable for sloping roof. Application of PANZHU WRAP breathable membrane
PANZHU WRAP Waterproofing Membrane HP-F49 Enhanced As the building energy conservation and environmental protection requirements are getting higher and higher, a large number of thermal insulation products are produced. PANZHU WRAP Waterproofing Membrane is one of them.PANZHU WRAP Waterproofing Membrane is used to protect the external insulation layer of the building.First of all, the waterproofing membrane is waterproof, which can prevent external water from entering into the insulation structure of the building, protect the insulation structure from mold, degumming and falling, thus protecting the safety of users.Second, it is breathable.The unique microporous structure of the waterproof breathable membrane makes it breathable.Building insulation structure will inevitably get troubled with the water in the using process , even if it is sealed perfectly, it can also appear condensation phenomenon in the insulation structure which will form water in the insulation structure.If not dealt with in time, it will affect the normal use of building thermal insulation layer. So the waterproof breathable membrane protects the construction external thermal insulation layer well.
The principle of PANZHU WRAP Waterproofing Membrane: Waterproof breathable working principle can be divided into two kinds-- microporous and hydrophilic groups, PANZHU WRAP Waterproofing Membrane is using the former. Due to the huge difference of diameter--- the minimum diameter of the water droplets 20 microns and the water vapor only about 0.0004 microns , water vapor can go through the microporous membrane easily.While because of the effect of surface tension, liquid water cannot pass the microporous membrane.Thus prevent the infiltration of water and make the breathable membrane waterproof. Advantages of PANZHU WRAP Waterproofing Membrane:
The product is used for insulation protection. It can protect the insulation from mold and rot. Let the house breath freely. Test items/unit Index Specification1.5mX50m Thickness 0.30mm Vapor transmission rat 1000g/m2.24h Watertightness500-2000mm water-column,2h,Impermeable Maximum tension(longitudinal) 220N/50mm Maximum tension(transversal) 111N/50mm Elongation at break(longitudinal) 110% Elongation at break(transversal) 100% Tear resistance(longitudinal) 135N Tear resistance(transversal) 100N Air oven aging test80 168h Maximum tension retention (longitudinal/transversal) 98%/87% Elongation retention at fracture (longitudinal/transversal) 72%/72% Anti-UV 4 months Meterial:PP fabric+PP breathable film+PP fabric. Light weight,easy to handle,UV and heat resistant,and fast to install,house wrap is pliable,so it readily wraps around corners,interfaces at joints,and wraps over unique architectural geometries.
It can protect your insulation from mold and rot. Let the house breathable freely. Test items/unit Index Specification1.5mX50m Thickness 0.30mm Vapor transmission rat1000g/m2.24h Watertightness500-2000mm water-column,2h,Impermeable Maximum tension(longitudinal)220N/50mm Maximum tension(transversal)111N/50mm Elongation at break(longitudinal)110% Elongation at break(transversal)100% Tear resistance(longitudinal)135N Tear resistance(transversal)100N Air oven aging test80 168h Maximum tension retention (longitudinal/transversal) 98%/87% Elongation retention at fracture (longitudinal/transversal) 72%/72% Anti-UV 4 months Flame retardant B1 Meterial:PP fabric+PP breathable film+PP fabric. Light weight,easy to handle,UV and heat resistant,and fast to install,house wrap is pliable,so it readily wraps around corners,interfaces at joints,and wraps over unique architectural geometries.
Test items/unit Index Specification1.5mX50m Thickness 0.30mm Vapor transmission rat 1000g/m2.24h Watertightness500-2000mm water-column,2h,Impermeable Maximum tension(longitudinal) 220N/50mm Maximum tension(transversal) 111N/50mm Elongation at break(longitudinal) 110% Elongation at break(transversal) 100% Tear resistance(longitudinal) 135N Tear resistance(transversal)100N Air oven aging test80 168h Maximum tension retention (longitudinal/transversal) 98%/87% Elongation retention at fracture (longitudinal/transversal) 72%/72% Anti-UV 4 months Meterial:PP fabric+PP breathable film+PP fabric. Light weight,easy to handle,UV and heat resistant,and fast to install,house wrap is pliable,so it readily wraps around corners,interfaces at joints,and wraps over unique architectural geometries.
high quality white waterproofing air permeable waterproof breathable membrane for exterior wall 750-3749 Square Meters US$0,69 3750-7499 Square Meters US$0,68 >=7500 Square Meters US$0,66 1 batch = 750 Square Meters Quantity: - 750 +Square Meters US$517,50 in total Shipping fee: Contact supplier for shipping cost to United States Lead Time: 5 day(s) after payment received Start Order Contact Supplier Add To Cart Samples - US$0,80 /Square Meter, 1 Square Meter (Min. Order): Buy Samples Quick Details Place of Origin: Beijing, China (Mainland), Beijing, China (Mainland) Brand Name: PANZHU Model Number: HW-E Product Name: Waterproof Membrane Thickness: 0.3mm Tear resistance(longitudinal):: â?¥135N Tear resistance(transversal): â?¥100N Elongation at break(longitudinal): â?¥110% Elongation at break(transversal): â?¥100% Anti-U V: 4 months Vapor transmission rate:: â?¥1000g/m2.24h Watertightness: 500-2000mm water-column ,2h,Impermeable Packaging & Delivery Selling Units: Multiple of Package size per batch: 125X40X19 cm Gross weight per batch: 114.1 kg Picture Example: package-img Lead Time : Quantity(Square Meter) 1 - 750 751 - 3750 3751 - 7500 >7500 Est. Time(days) 5 10 15 To be negotiated Test items/unit Index Specification 1.5mX50m Thickness 0.30mm Vapor transmission rat â?¥1000g/m2.24h Watertightness 500-2000mm water-column,2h,Impermeable Maximum tension(longitudinal) â?¥220N/50mm Maximum tension(transversal) â?¥111N/50mm Elongation at break(longitudinal) â?¥110% Elongation at break(transversal) â?¥100% Tear resistance(longitudinal) â?¥135N Tear resistance(transversal) â?¥100N Air oven aging test 80 Ã?168h Maximum tension retention (longitudinal/transversal) 98%/87% Elongation retention at fracture (longitudinal/transversal) 72%/72% Anti-UV 4 months Meterial:PP fabric+PP breathable film+PP fabric. Light weight,easy to handle,UV and heat resistant,and fast to install,house wrap is pliable,so it readily wraps around corners,interfaces at joints,and wraps over unique architectural geometries. PANZHU FIBERâ?¢ provides high performance products and service to customers home and abroad. The main products are building envelope solutionsincluding waterproof breathable membranes,aluminum foil membranes, insulation films and all kinds of veneers,PTFE products a broad family of gaskets and various packing products. We also provide OME service,making special production according to your requirement.
Polymer-cement waterproof coating is a kind of two-component waterproof coating composed of synthetic polymer emulsion and various additives, which is composed of liquid and matching powder. It is a kind of waterproof material with high elasticity of synthetic polymer materials and good durability of inorganic materials. It has the characteristics of rigidity and flexibility, and has the extensibility of polymer coating film, water repellency, and high strength of hydraulic cementing material. Good water resistance, easy to wet base bonding Good flexibility, can resist the slight vibration of the building structure and a certain degree of displacement, and can be applied on the wet base and firmly bonded Water-based materials, non-toxic and harmless, non-polluting are environmentally friendly mater.
The self-adhesive modified asphalt waterproofing membrane is a self-adhesive waterproof material which is made of an elastomer such as SBS and an asphalt, a polyethylene film, an aluminum foil as a surface material or a film (double-sided self-adhesive), and an anti-adhesion barrier layer. Self-adhesive rubber asphalt waterproofing membrane is a new type of building waterproofing material with broad development prospects. It has excellent water impermeability, low temperature flexibility, extensibility and cohesiveness. In particular, it has self-healing properties, which are advantages not found in general waterproof materials, and can ensure superior waterproof quality of waterproof engineering.
Polyethylene polypropylene polymer composite waterproofing membrane is a polymer composite coil (sheet) which is made of polyethylene resin as the main raw material.Adding various additives,then once formed by calendering process , and is a surface (double-sided) composite polypropylene non-woven fabric . A multi-layer polymer synthetic sheet material is selected, is a new type of waterproof material manufactured by a new technology and process. The product has high tensile strength, strong impermeability, good low temperature flexibility, small expansion coefficient, easy adhesion, small friction coefficient, can be directly used in sand, stable and reliable performance, is a non-toxic, non-polluting Green products.
Polyester linoleum base fabric is a kind of non-woven fabric, which can also be called: tire base fabric, linoleum base fabric, waterproof base fabric. Polyester linoleum base fabric is a non-woven fabric product which is processed by carding, acupuncture reinforcement and dipping and setting of 100% polyester staple fiber . The shape is cloth type. It is made of high-strength fiber and has the characteristics of high tensile strength, corrosion resistance, aging resistance, high temperature resistance, good thermal stability, good permeability and large elongation. It is the first choice for producing modified asphalt waterproofing membrane. It mainly used in construction building construction, roofing engineering, underground engineering, bridge deck engineering, waterproofing of water storage tank, moisture proof and anti-corrosion of building foundation.
One-component polyurethane waterproof coating is a kind of reactive curing film-forming polymer waterproof coating.It is made up of isocyanate and polyether as main raw materials, mixed with various additives such as solidifying agent and plasticizer, and is dehydrated and polymerized by high temperature. sherry@henanjax.com
The elastomeric SBS modified asphalt waterproof rolling material is made of styrene butadiene-styrene rubber modified asphalt as coating. It is made of glass fiber felt, polyester felt and glass fiber reinforced polyester felt as the tread material. Features: Strong impervious performance and good anti-aging ability Acid and alkali resistant, with a service life of 30 years Good endurance climate capability Can be used in low temperature environments with long life High tensile strength, high elongation, good dimensional stability
Product Description -What is geomembrane? A geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project, structure, or system. Geomembranes are made from relatively thin continuous polymeric sheets, but they can also be made from the impregnation of geotextiles with asphalt, elastomer or polymer sprays, or as multilayered bitumen geocomposites. Continuous polymer sheet geomembranes are, by far, the most common. -Raw material- Imported virgin resin( Saudi Arabia or Qatar); Sinopec virgin resin; Recycled material. - Application - 1. Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) . 2. Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.). 3. Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.). 4. Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.) 5. Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.). 6 .Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.)
How About PP(Polypropylene) Continuous Filament Geotextile? Polypropylene Continuous Filament Geotextile Performance (1) polypropylene density is small, only 0.91 g / m3 (polyester is 1.38 g / m3), so the polypropylene geotextile than polyester geotextile, under the same strength, with a greater coverage area. (2) the special structure of polypropylene to make it has excellent acid and alkali resistance, especially alkali resistance is better than polyester, in the soil alkaline strong underground protection, strengthening, waterproof, anti-seepage and other projects When the effect is better than polyester. (3) polypropylene fiber surface friction coefficient is small, the friction between the fibers is small, and good wear resistance, anti-vibration friction performance is much better than polyester. Application: 1.Filtration of soils in drainage applications by retaining soil particles while allowing for the free flow of water 2.Separation and reinforcement in road and railway construction 3.Prevention of soil movement in erosion control measures 4.Cushioning and protection in many containment projects Specification 1. Weight Type: 80GSM -- 1500GSM 2. Width: Max 6 meter , the length as client`s request 3. Color: White, Black, Gray, Brown... 4. Package: Paper Core, Waterproof Membrane and Plastic Woven Fabric 5. Loading details: 20ft container, 40ft High Container Geotextiles Advantages:1. Isolation 2 .Filter 3 Drainage 4 Reinforced 5 Protection 6. Closed 1. Isolation The use of geotextile different physical properties (particle size, distribution, density and thickness, etc.) materials (such as soil and sand and gravel soil, soil and concrete, etc.) for isolation. So that two or more materials are not loss of inter-and non hybrid,to maintain the overall structure of the material and functions of the structures is to strengthen the load bearing capacity. 2 .Filter When the water from fine materials into the soil layers of rough material, the use of acupuncture geogextile good air and water permeability, so that the water flow through, and effective interception soil particles, spinning, the small stone so as to maintain the stability of the soil and water projects. 3 Drainage Acupuncture geotextile is a good hydraulic material, which can from a soil internal drainage channel, soil structure and excess liquid gasemissions.
Product Description The geocell geosynthetic cellular confinement system is a matrix of lightweight, expandable and flexible thermoplastic strips that are ultrasonically bonded to form a strong, dimensionally stable and inert honeycomb structure. The geocell is honeycombed three-dimensional grid structure which is welded by high-strength HDPE sheet. The geocell is easy to stretch. It can be folded up when transport and opened to fill the earth or concrete when use it. It will constitute a strong lateral and large stiffness of the structure when use it. In the geotechnical engineering, soil, sand, stone, concrete and other fill together constitute a different cohesion, different reinforcement strength, different depth of the cushion. The cushion can be placed in the required position accordance with the requirements of the project for Reinforcement of roads, railways and soft soil foundation, slope protection, green structure, the construction of retaining walls and so on. The most important feature is can solve and complete a variety of difficult problems which can be dealed with use conventional method in geotechnical engineering,such as bridge jumping, soft base subsidence, fouling, landslides and desert subgrade. Concrete construction method 1.Open the superimposed geocell. 2.Fixed with nails or connected with the framework of stretching device. 3.Fill the particle filler until the full and beyond standard room to the top, then vibrate or roll to finish the primary work. 4.At this point, cell chamber system can support all kinds of construction equipment. The construction can be done directly in the above. Payment Type: L/C,T/T,Paypal,Money Gram,Western Union Incoterm: FOB,CFR,CIF,FCA,CPT,CIP Min. Order: 1000 Square Meter Delivery Time: 15 Days
Waterproof building materials: house wrap Housewrap is a moisture barrier building paper. External wall waterproof breathable membrane, covered in the external wall insulation layer. Usage: in all kinds of house wall, for example: steel structure, timber work and all of the solid wall ( concrete wall, brickwork wall ). The best balance of the property, which our membrane can effectively strengthen the water tightness of the building, as well as to eliminate humidity inside the containment by the unique breathability. z
A:Technical Specifications Colour Blend grey Material Recycleled polyester felt paint materials Thickness Appr 1.5 mm Width 100 cm Roll length 50 M Weight 200 g/m2(+/5%) Contruction Fleece layer + non-slip PE foil backing layer H.S code: 5603949019 B: Feature of recycleled polyester felt paint materials (1)Absorbent non-woven fabric layer +Slip-resistant and impermeable coated bottom (2) Simple, clean and fast interpreted (3) Absorbent surface, impermeable underside of sheet (4) Anti-slip bottom for a secure grip (5) Reusable,damp-proof (6) Inside and outside use absorbent non-woven non slip mat C: Application of recycleled polyester felt paint materials Suitable for various areas of application in the craft and the construction: (1) Protects floors, carpet and furniture from paint spills, thinners, glue, etc, like a sponge. (2) Fixed stop on stairs and ladders. (3) Protection against liquids and mechanical damage.
Specifications Type: Shoe Fabric Place of Origin: Fujian, China (Mainland) Brand Name: kinghope Model Number: FIS-XXX material: nonwoven fabric thickness: 0.9mm-3.0mm specification: 36"*54",1y*1.5y color: white or others certificate: ISO9001-2002 business type: manufacture experience: more than 20 years web: www.cn-zhh.com skype: zhhshoes3 Packaging & Delivery Packaging Details: 20-25pcs/bag Delivery Detail: 3-7days stripe insole board despriction Thickness: 1.25mm, 1.5mm, 1.75mm, 2.0m or customize Specification: 36â?� X 54â?� or customize Color:White, black and others Functions: 1. Durable, keep in shape, keep no stinking 2. Good for one's health, Help for one's blood circulation. 3. Wearable, well ventilated, Environment-friendly, hygienic. Without azobenzene or heavy metal. Good elasticity, Good breaking resistance, comfort. Applications: Mainly used for innersole of sports and leather shoes, the board of briefcase and suitcase. Our main market Europe, Middle east, Southeast of Asia,centre south Americen and so on Price: FOB USD 0.9~1.5 / Piece Minimum Order Quantity: Negotiable Trial Order Minimum Order Quantity: 2000 Piece/PiecesTrial Order Port: Xiamen Packaging Details: 25 sheets packed in a poly bag. Delivery Time: 3-7 days after receive your 30% deposit. Payment Terms: L/C,T/T Supply Ability: 25000 Piece/Pieces per Day
Specifications Type: Shoe Linings Place of Origin: Fujian, China (Mainland) Brand Name: Kinghope Model Number: NWNPK Material: 100% Polypropylene Facotory location: Wuli industry zone,Jinjiang city Factory size: 20,000 meter squre Sample: free sample Our market: all over the world Color: white or others Skype: zhhshoes3 Width: 58/60" Weight: 25gsm-300gsm Packaging & Delivery Packaging Details: in roll Delivery Detail: 3-7 days PP spunbonded nonwoven fabric Specification:25g/m²-300g/m², Width:Customize Color:Black,White,Red or customize Functions: Good breaking resistance,High tensile Applications: polyester pp non woven fabricMainly used as lining of shoes, recyclable bags, lining of cushion etc. Fabric-like material made from long fibers, bonded together by mechanical treatment. It is used in the textile manufacturing industry to denote fabrics, such as felt. Nonwovens have become an alternative to polyurethane foam.
