One-component polyurethane waterproof coating is a kind of reactive curing film-forming polymer waterproof coating.It is made up of isocyanate and polyether as main raw materials, mixed with various additives such as solidifying agent and plasticizer, and is dehydrated and polymerized by high temperature.
sherry@henanjax.com
- One component polyurethane waterproofing materials - No problem with mixing - Good adhesion to substrate - Persistence and chemical resistance - Easy application and repair - The elongation as a material with excellent elasticity -
Feature 1.Anti-high and low temperature 2.Non-slip and soft surface. Excellent Anti-slip performance 3.UV-Resistance,Ozone Resistant. 4.super clear &High transparent color. 5.Coating adhesive liner is welcome
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
RECEMIX 2K grey ( 2 component semi elastic waterproofing material ) RECEFLEX 2K grey ( 2 component ultra flexible waterproofing material ) RECEFLEX 2K white ( 2 component ultra flexible waterproofing material )
Supplier: Oem Polyurethane Polymer Coating For Roof Simming Pool
Waterborne Polyurethane waterproof coating Polyurethane waterproof coatings can be divided into one-component and two-component. One-component polyurethane waterproof coating, also known as moisture-curing polyurethane waterproof coating, is a reactive moisture-curing film-forming waterproof coating. It is applied to the waterproof base layer during use and is cured to cross link into a tough, soft and seamless rubber waterproofing membrane by reacting with moisture in the air. High-strength polyurethane waterproof coating is a two-component reactive curing waterproof coating. High-strength polyurethane waterproof coating Two-component chemical reaction-cured isocyanate-terminated prepolymer obtained by polycondensation of polyether and acid. Component B is composed of plasticizer, curing agent, thickener, accelerator, and filler. Composition of colored liquids. When used, the two components of A and B are uniformly mixed in proportion, coated on the surface of the waterproof base layer, and often cured by temperature cross linking to form a rubber elastic film with high elasticity, high strength and durability, thereby waterproofing. The waterborne polyurethane waterproof coating generally refers to the one-component polyurethane waterproof coating, and the oily refers to the two-component polyurethane waterproof coating; in comparison, the water performance is almost the same, the price is also cheaper, the most important thing to look at the use environment! However, waterborne polyurethane waterproof coatings are more environmentally friendly.
One-component polyurethane waterproof coating, also known as moisture-curing polyurethane waterproof coating, is a reactive moisture-curing film-forming waterproof coating. When used, it is coated on the waterproof base layer, and cured and cross-linked into a tough, soft and seamless rubber waterproof membrane by reacting with the moisture in the air.
Yuhong Brand HCA-102 Acrylic Roofing Waterproof Coating is processed with 100% pure acrylic elastic emulsion as base material, mixed with high-grade pigment and varieties of carefully-chosen accessory ingredients. The product is excellent flexibility, bonding power and anti-ultraviolet radiation performance and applies to directly-exposed roofing waterproof project. Features 100% pure acrylic elastic emulsion is base material. Outstanding outdoor durability and anti-ultraviolet radiation. Outstanding cohesiveness, applicable to steel structure base, cement mortar or concrete base, etc. Durable low-temperature flexibility, crack-free bending under -30; low temperature. Excellent elasticity. Environmental water paint, pollution free. Liquid state, cold process, safe and easy. Application Range; Apply to directly exposed roofing waterproof project. Conformation Points; Waterproof base: steel structure base, cement mortar or concrete base, internal and external angles should be in the form of circular arch, internal angle diameter should be bigger than 50mm, external angle diameter bigger than 10mm. For base cracks and grooves at the pipe end, sealing material should be filled and addition waterproof treatment should be made. Film-coated waterproof layer: in case of multi-coating protection, thickness of each film coating should not be smaller than 1.5mm; for one-coating protection, thickness should not be smaller than 2mm. It can be separate film-coated waterproof conformation, and a layer of base reinforcement material can also be added according to actual engineering situation or design requirements. Attention for construction; Appropriate construction temperature is between, construction is not suitable in rainy days or there is water on the base. Before hard dying of the film coating, waling on the waterproof layer is strictly forbidden, and protect it from damages.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
