Measuring accuracy: 0 /-3mm Unit: m/in/ft Measuring range (no reflector) : 0.03-40m (ht-180) Measurement time: 0.1-3 seconds Laser level: â?¡ level Laser type: 635nm, < 1mw Dust and water proof: OP54 Auto - off laser: 60 seconds Automatic shutdown: 480 seconds Lighting: white LED light Measuring reference switch: Yes Data cleaning: Yes Power display: Yes Signal strength indicator: Yes Data storage: Yes Continuous measurement (Max/min): Yes Plus/minus (distance/area/volume): Yes Area/volume/ticker measure function: Yes Lofting: Yes Key life: 1 million times Battery type and life: AAA alkaline battery (2* 1.5v) Product size: 118*54*27mm Weight: 81 g Operating temperature range: 0 and 40 Storage temperature range: - 20 to 60
S&A water chiller CWFL-1500 for cooling 1500W metal fiber laser machine Laser industrial refrigeration chiller CWFL-1500 is produced by Guangzhou Teyu Electromechanical Co., Ltd. For over 16 years in screening and training, we integrate lots of superior components suppliers. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term. CWFL-1500 is special for cooling 1500W metal fiber laser cutting & engraving machine. S&A dual temperature chiller model CWFL-1500 is high-precision compression refrigeration industrial cooling system,with intelligent temperature control,completed configuration,perfect protection and alarm system. It is applied for cooling 1500W fiber laser. S&A CWFL-1500 is able to cool the fiber laser and QBH connector at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. CWFL-1500 chiller features: 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; Water chiller parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.55KW; Tank capacity:15L Max. lift:45M; Max. flow: 70L/min N.W: 86Kgs; G.W: 96Kgs; Dimension : 78 X 47 X 89 cm (L X W X H); Packing dimension: 87 X 60 X 109 cm(L X W X H)
S&A water-cooled chiller CW-3000 AC220V, 50Hz for co2 laser or CNC spindle S&A CW-3000 series thermolysis type water-cooled chiller has compact design,with energy saving,high cost performance,good protection and alarm system. CW-3000 features: 1. Radiating capacity: 50W / â??; 2. Small thermolysis water cooler, energy saving, long working life and simple operation; 3. With completed water flow and over high temperature alarm functions; 4. Multiple power specifications; CE,RoHS and REACH approval; S&A CW-3000 water chiller video: http://www.teyuchiller.com/Article/SAindustrialwaterchillercw-3_1.html Specification: CW-3000AG: applied to cool a single 80W CO2 laser tube (emitting rate lower than 60%) CW-3000AH: applied to cool dual 1.5 KW CNC spindles or welding equipment; Voltage:110V-220V Frequency: 50/60Hz Tank capacity:9L Max. lift:10M-70M; Max. flow: 10L/min- 2L/min N.W: 9.5Kgs; G.W: 12Kgs Dimension : 49 X 27 X 38cm (L X W X H) Packing dimension: 59 X 39 X 48cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages:1. With 11 patent certificatesCE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warrenty 2.±0.1â?? high precision temperature control, stable cooling performance,support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages:1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Anual ouput 60,000 units,product exports rate above 60% 3. Standard bulk production,standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller.
ModelDN-20 Fiber laser marking machine Laser wavelength1064nm Laser typeFiber Laser power20W Acousto-optic modulation frequency20Hz-200kHz Max. scanning precision8000mm/s Repeatable accuracy0.001mm Min. letter0.2mm Min line width0.01mm Marking area220 * 220mm Soft wareEnglish EZCAD ,easy to operate Cooling systemAir cooling Working Temperature0,-35, Working humidity0-90%, with no condensation Power supply220V/50HZ (Optional 110V/60HZ) Applicable Industries , Auto parts: pistons, piston rings, gears, shafts, bearings, clutches and lights; , Electronic components: resistors, capacitors, chips, printed circuit boards and keyboards; , Basic mechanical components: bearings, gears, standard parts and motors; , Instruments: panels, signs and precision instruments; , Hardware tools: knives, tools and measuring tools; , Daily necessities: crafts, zippers, leather clothing and sanitary ware.
Model,DN-20 Fiber laser marking machine Laser wavelength,1064nm Laser type,Fiber Laser power,20W Acousto-optic modulation frequency,20Hz-200kHz Max. scanning precision,8000mm/s Repeatable accuracy,0.001mm Min. letter,0.2mm Min line width,0.01mm Marking area,220 * 220mm Soft ware,English EZCAD ,easy to operate Cooling system,Air cooling Working Temperature,0-35 Working humidity,0-90%, with no condensation Power supply,220V/50HZ (Optional 110V/60HZ)
S&A CW-3000,CW-5000,CW-5200 chiller stock in USA and Europe CW-3000,CW-5000 and CW-5200 chiller is produced by S&A company . S&A CW-3000 series thermolysis type water cooler has compact design, with energy saving, high cost performance, good protection and alarm system. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted. It is applied for cooling 80W laser tube or 2*1.5KW CNC spindle. S&A CW-5000 and CW-5200 chiller both are refrigeration type industrial water chiller CW-5000 has 800W cooling capacity, it is applied for cooling 100W CO2 laser You can visit the CW-5000 video: CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) S&A brand CW-5200 water coolers cooling capacity up to 1.4KW, it is applied for cooling 5W-10W solid-state laser, 5W-10W solid-state laser, 8KW CNC spindle, 50W-75W laser diode, a single15W-30W solid-state laser or a single 30W RF laser tube. Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 26Kgs; G.W: 29Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
S&A water chiller system CW-6200 with 5.1KW cooling capacity CW-6200 series is high-precision compression refrigeration water chiller producing by S&A company. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture. Features of CW-6200: 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5 precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 5. Multiple power specifications; CE, RoHS and REACH approval; 6. Long working life and simple operation; 7. Optional heater and water filter. CW-6200 parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 69Kgs; G.W: 79Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
S&A industrial water chillers CW-6300 support ModBus communication CW-6300 chiller is producing by S&A company. S&A has independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. With 15 years development, gradually grow as the industry standard builder and quality guarantee. CW-6300 chiller features: 1. 8500W cooling capacity; optional environmental refrigerant; 2 precisely temperature control; 3.The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4.Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 5.Multiple power specifications; CE,RoHS and REACH approval; 6. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller.7.Long working life and simple operation; Optional heater and water filter. CW-6300 parameter: Voltage:1P 220V/3P 380V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.37~1.1KW; Tank capacity:45L Max. lift: 28~53M; Max. flow: 70L/min- 116L/min N.W: 165Kgs; G.W: 210Kgs; Dimension : 83 X 65 X 117 cm (L X W X H); Packing dimension: 111 X 85 X 140 cm(L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
S&A water chiller CW-6000 with 3KW cooling capacity and environmental refrigerant CW-6000 chillers are producing by S&A company. S&A water chiller CW-6000 has 3000W cooling capacity with stability, water filter installed and r410a refrigerant loaded. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. S&A chiller has excellent laboratory testing system, simulates actual working environment for chiller. CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
Printer for flat material Ricoh head flat printer Appliable material: plastic, wood, leather, phone case, oil painting Ceramic, acrylic, and so on
Letter bending machine in uae
General type 40W60W80W MYJG CO2 laser power supply myjg-40/60/80watt laser power source 1. Product Features: It has green color control signal terminal board 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5V analog signal or PWM signal. 4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified. 3. Specification: Item MYJG-40 MYJG-60 MYJG-80 MYJG-100 MYJG-130 MYJG-150 30KV 35KV 45KV 50KV 50KV 50KV 20mA 23mA 30mA 30mA 35mA 38mA Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Efficiency 91% Over Current Protection 130% of Max. Current Open Circuit Protection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH)171mmx161mmx91mm Note Power supply warranty:12 months. Delivery time:2 working days after payment received. Package:Carton,foam and wooden box. Shipping method:DHL,UPS,Fedex or TNT Payment method: T/T,PAYPAL,Western Union Application:General type power supply and widely used on 40W-150W CO2 laser engraving machine.or cutting machine
S&A Air-cooled water chiller for water-cooled computing server S&A CW-7800 is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. S&A Air-cooled water chiller CW-7800 is able to cool water-cooled computing server. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. S&A Air-cooled water chiller â??s features: 1.19KW cooling capacity; optional environmental refrigerant; 2. ±1â?? precisely temperature control; 3. with various setting and error display functions 4. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm, phase sequence protection and anti-freezing function; 5.Multiple power specifications; CE,RoHS and REACH approval; 6. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller. 7.Long working life and simple operation; Optional heater and water filter. CW-7800 video: http://www.teyuchiller.com/Article/00SAwaterchillerCW7800_1.html CW-7800 chillerâ??s specfications: Voltage:3P 380V; Frequency: 50/60Hz; Refrigerant: R-22 / R-407C Pump power: 0.37-1.1KW; Tank capacity:140L;Max. lift: 28-53M; Max. flow: 70-116L/min;N.W: 445Kgs; G.W: 550Kgs; Dimension : 155X82X178cm (L X W X H); Packing dimension: 165X105X198 cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 15,000 square meters, and has about 220 employees. With annual production capacity for cooling system up to 60,000 units, the product has been sold to more than 50 countries and regions. With its excellent quality and leading R&D strength, z
ASE Broadband Light Source C+L band 1550nm 1610nm 17dBm laser optic fiber source Hoyatek Output power up to 20dbm
Features: High stability High output power Alarm automatic Remote control available Output power tunable (optional) Module or bench-top (optional) Applications: Fiber sensing system light source Fiber sensor(fbg, f-p)testing Fbg, dwdm, filter testing Optical passive component testing Fiber testing instrument Fiber sensing&communication experiment Medical field
S&A chiller for cnc router and co2 laser machines S&A brand CW-5200 chiller is fit for cooling cnc router and co2 laser machines. Its cooling capacity up to 1.4KW , ±0.3â?? temperature control precision and temperature control range in 5-35â??. It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. chiller CW-5200 specfications: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 26Kgs; G.W: 29Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A produces more than 60000 units of industrial chillers by year,we always insist onâ?�Quality Firstâ?� in design and production. â??S&Aâ?� and â??TEYUâ?� have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad and export rate reaches above 60%.
S&A CW-6200AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system, it is applied to cool 1KW laser source of IPG, MaxPhotonics and nLIGHT. S&A CW-6200AT is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; REACH approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Model CW-6200AT CW-6200BT Voltage 220V 220V Frequency 50Hz 60Hz Current 2~13A Compressor power 1.68KW 1.65KW 2.24HP 2.2HP High + low temp system refrigeration capacity 1706 Btu/h+15820 Btu/h 1706 Btu/h+15940 Btu/h 0.5 KW+4.63 KW 0.5 KW+4.67 KW 430 Kcal/h+3986 Kcal/h 430 Kcal/h+4016 Kcal/h Refrigerant R-22 / R-410a Refrigerant charge 1300g 1300g Precision ±0.5â?? Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm High + low temp pump power 0.1KW + 0.55KW High + low temp tank capacity 4L + 12L High + low temp pump lift 25M + 36M High + low temp inlet and outlet Rp1/2" + Rp1/2" High + low temp pump flow 16L/min + 70L/min N.W 92Kgs G.W 102Kgs Dimension 78 x 47 x 89 cm (L x W x H) Package dimension 87 x 60 x 109 cm (L x W x H)
S&A refrigeration water chiller for wire EDM machine S&A refrigeration water chiller CW-6000 has 3000W cooling capacity with ±0.5â?? stability, it is fit for wire EDM machine.It has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. Water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) About S&A Brand S&A produces more than 60000 units of industrial chillers by year,we always insist onâ?�Quality Firstâ?� in design and production. â??S&Aâ?� and â??TEYUâ?� have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad,and export rate reaches above 60%.
S&A CW-5000 small portable chiller with compact size, long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in 0.3 precision. It's mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
S&A chiller CW-6100 for woodworking and laser machines S&A chiller CW-6100 is developed and produced by S&A supplier of China, it is fit for cooling woodworking and laser machines. CW-6100 has 4.2KW cooling capacity, 0.5 stability, and multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. CW-6100 water chiller parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 65Kgs; G.W: 77Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)
