S&A water chiller system CW-6200 with 5.1KW cooling capacity
CW-6200 series is high-precision compression refrigeration water chiller producing by S&A company. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture.
Features of CW-6200:
1. 5100W cooling capacity; optional environmental refrigerant;
2. ±0.5 precisely temperature control;
3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
5. Multiple power specifications; CE, RoHS and REACH approval;
6. Long working life and simple operation;
7. Optional heater and water filter.
CW-6200 parameter:
Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a
Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L
Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min
N.W: 69Kgs; G.W: 79Kgs;
Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)
About S&A Brand
S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
Supplier: Branded consumer electronics, televisions, cameras, home appliances, car audio systems, hair curlers, hair trimmers, hair clippers, hair straighteners, beard trimmers, shavers, vacuum cleaners, air purifiers, blenders, mixers, juicers etc, mg3710/15 mg3730/15 mg5720/15 mg7720/15 bt1233/14 bt3206/14 bt3216/14
POM regrind black color full container available POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin: High hardness Bearing good Low friction number High resistance to abrasion High temperature resistant Less water intake Has anti-static ability Dimensional stability, little change Less smoke burns when burning High glossy surface High crystallization In addition to the priority points, POM plastic also has some limited formats such as: Quality acid resistance and alkali High hatch rate when changing secretions Operation mode Heat range MATERIAL: POM regrind black color full container available CATEGORY: POM TYPE: Regrind GRADE: Black color SPECIFICATION: 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
HDD-880 12.5 Full HD 1080P Display Capacitive Touch Screen POS System Machine with Optional MSR for Contactless Payment. Model Number : HDD-880 Samples: HDD-880 $235.00/Piece | 1 Piece (Min. Order) | Buy Samples Lead Time: Quantity(Pieces) 1 - 10 11 - 100 >100 Est. Time(days) 7 20 To be negotiated Customization: Customized logo(Min. Order: 100 Pieces) Customized packaging(Min. Order: 200 Pieces) Graphic customization(Min. Order: 100 Pieces)
Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station
S&A water chiller CW-6000 with 3KW cooling capacity and environmental refrigerant CW-6000 chillers are producing by S&A company. S&A water chiller CW-6000 has 3000W cooling capacity with stability, water filter installed and r410a refrigerant loaded. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. S&A chiller has excellent laboratory testing system, simulates actual working environment for chiller. CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
S&a chiller cw-5200 for medical laser systems S&a cw-5200 chiller is fit for cooling medical laser systems. Its cooling capacity up to 1.4kw and the thermoelectric control in ±0.3? precision and temperature control range in 5-35?. It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control. S&a chillers have passed iso, ce, rohs and reach approvals and the warranty is 2 years. Recirculating chiller cw-5200 specfications: Cw-5200ag: applied to cool a single 130w co2 laser tube Cw-5200ah: applied to a cool a single 8kw cnc spindle, welding equipment or two 100w co2 laser tubes. Cw-5200ai: applied to a cool single 50w-75w laser diode, a single15w-30w solid-state laser or a single 30w rf laser tube; Optional: cw-5202 dual water inlet and outlet series; heat booster; water filter. Voltage:110v-220v; frequency: 50/60hz; refrigerant: r-22 / r-134a / r-410a Pump power: 0.03kw/0.05kw/0.1kw; tank capacity:6l Max. Lift:10m-25m; max. Flow: 10l/min- 16l/min N.W: 26kgs; g.W: 29kgs; Dimension : 58 x 29 x 47 cm (l x w x h); packing dimension: 70 x 43 x 58 cm (l x w x h) About s&a brand S&a produces more than 60000 units of industrial chillers by year, we always insist on”quality first” in design and production. “s&a” and “teyu” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60%.
S&A industrial water chillers CW-6300 support ModBus communication CW-6300 chiller is producing by S&A company. S&A has independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. With 15 years development, gradually grow as the industry standard builder and quality guarantee. CW-6300 chiller features: 1. 8500W cooling capacity; optional environmental refrigerant; 2 precisely temperature control; 3.The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4.Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 5.Multiple power specifications; CE,RoHS and REACH approval; 6. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller.7.Long working life and simple operation; Optional heater and water filter. CW-6300 parameter: Voltage:1P 220V/3P 380V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.37~1.1KW; Tank capacity:45L Max. lift: 28~53M; Max. flow: 70L/min- 116L/min N.W: 165Kgs; G.W: 210Kgs; Dimension : 83 X 65 X 117 cm (L X W X H); Packing dimension: 111 X 85 X 140 cm(L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
S&A water-cooled chiller CW-3000 AC220V, 50Hz for co2 laser or CNC spindle S&A CW-3000 series thermolysis type water-cooled chiller has compact design,with energy saving,high cost performance,good protection and alarm system. CW-3000 features: 1. Radiating capacity: 50W / â??; 2. Small thermolysis water cooler, energy saving, long working life and simple operation; 3. With completed water flow and over high temperature alarm functions; 4. Multiple power specifications; CE,RoHS and REACH approval; S&A CW-3000 water chiller video: http://www.teyuchiller.com/Article/SAindustrialwaterchillercw-3_1.html Specification: CW-3000AG: applied to cool a single 80W CO2 laser tube (emitting rate lower than 60%) CW-3000AH: applied to cool dual 1.5 KW CNC spindles or welding equipment; Voltage:110V-220V Frequency: 50/60Hz Tank capacity:9L Max. lift:10M-70M; Max. flow: 10L/min- 2L/min N.W: 9.5Kgs; G.W: 12Kgs Dimension : 49 X 27 X 38cm (L X W X H) Packing dimension: 59 X 39 X 48cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages:1. With 11 patent certificatesCE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warrenty 2.±0.1â?? high precision temperature control, stable cooling performance,support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages:1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Anual ouput 60,000 units,product exports rate above 60% 3. Standard bulk production,standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller.
