40W60W80W Myjg Co2 Laser Power Supply

Supplier: Food products, fruit and recreational plants, palm trees, generators, transformers, household electronics, ev charging stations, accumulators and battery systems, cooling appliances and frigotic systems for vehicles, furnitures (office and household types), copper tubes, powder metals for 3d printers, electrical equipment, defense products most notably drones (strategic /tactical), carrying boxes.
Services: Trade, sourcing and investment intelligence, supply chain development services, trade facilitation, inspection, operations support, full fledged trade/supply chain agency services
Buyer: High grade lead, zinc, antimony, manganese, iron ores.

1. Main Features: 1) Good compatibility: It can be applicable to 80W laser tube. 2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7mAAC220V Input :0.4mA(AC110V Input) Output: Maximum Input Voltage: DC 40KV Maximum Output Current: DC 28mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40 Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=280*173*97(mm) COLOUR : YELLOW , BLACK 3.5kg to be boxed.

6040 co2 laser engraving machine 40w 4060 co2 laser engraver Features This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry. Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube Features: 1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube. 2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal. 4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst. 5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case. Specification: Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Max. Output Voltage 40KV Max. Output Current 28mA(Depends on Laser tube) Efficiency 91% Over Current Protection 130% of Max. Current Open circuitProtection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) �  Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH) 270x160x80mm

Supplier: All types of products sourcing. electronics & consumer goods: mobile phones, laptops, home appliances, and accessories, industrial equipment: machinery, generators, and industrial tools automotive parts: tires, engines, and automotive accessories textiles & apparel: clothing, footwear, and fabrics furniture: indoor and outdoor furniture, office furniture food products: food additives, spices, seafood (e.g., tilapia, shrimp) packaging solutions: custom packaging, food grade plastic containers, and eco friendly options, building materials: tiles, flooring, doors, and windows, solar products & renewable energy equipment other products.
Services: Product sourcing, import and export, oem and private labeling, quality control, logistics and shipping specialist, and retail distributor.

1. Main Features: 1) Good compatibility: It can be applicable to 40W and 30W laser tube. 2) Fast response speed and effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7m AAC220V Input 0.4mA(AC110V Input) Output Maximum Input Voltage: DC 25KV Maximum Output Current: DC 20mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40¡æ£¬Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=167*144*97(mm). 2.7kg,32*25*22cm carton box.