S&A industrial water chillers CW-6300 support ModBus communication
CW-6300 chiller is producing by S&A company. S&A has independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. With 15 years development, gradually grow as the industry standard builder and quality guarantee.
CW-6300 chiller features:
1. 8500W cooling capacity; optional environmental refrigerant;
2 precisely temperature control;
3.The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4.Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
5.Multiple power specifications; CE,RoHS and REACH approval;
6. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller.7.Long working life and simple operation; Optional heater and water filter.
CW-6300 parameter:
Voltage:1P 220V/3P 380V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a
Pump power: 0.37~1.1KW; Tank capacity:45L
Max. lift: 28~53M; Max. flow: 70L/min- 116L/min
N.W: 165Kgs; G.W: 210Kgs;
Dimension : 83 X 65 X 117 cm (L X W X H); Packing dimension: 111 X 85 X 140 cm(L X W X H)
About S&A Brand
S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
POM regrind black color full container available POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin: High hardness Bearing good Low friction number High resistance to abrasion High temperature resistant Less water intake Has anti-static ability Dimensional stability, little change Less smoke burns when burning High glossy surface High crystallization In addition to the priority points, POM plastic also has some limited formats such as: Quality acid resistance and alkali High hatch rate when changing secretions Operation mode Heat range MATERIAL: POM regrind black color full container available CATEGORY: POM TYPE: Regrind GRADE: Black color SPECIFICATION: 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Supplier: White Cement, White Clinkers, Petroleum Products, Urea, Electronics, Camera And Printers, Organic Waste Treatment Products ( Antizyme Eco Enzyme Bacteria, To Avoid The Blockage And Avoid The Bad Smell From The Wastage Area )
Buyer: Photographic camera, printers, gaming consoles etc
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Supplier: Branded consumer electronics, televisions, cameras, home appliances, car audio systems, hair curlers, hair trimmers, hair clippers, hair straighteners, beard trimmers, shavers, vacuum cleaners, air purifiers, blenders, mixers, juicers etc, MG3710/15 MG3730/15 MG5720/15 MG7720/15 BT1233/14 BT3206/14 BT3216/14
Supplier: Surveillance cameras, solar panels, agricultural product, chemicals, energy supplies
Buyer: Digital equipment
S&A water chiller CW-6000 with 3KW cooling capacity and environmental refrigerant CW-6000 chillers are producing by S&A company. S&A water chiller CW-6000 has 3000W cooling capacity with stability, water filter installed and r410a refrigerant loaded. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. S&A chiller has excellent laboratory testing system, simulates actual working environment for chiller. CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
Supplier: Used heavy equipment and machinery, indonesian product supplier, coal supplier, minerals supplier, craft, clothes, spices, food beverages,
Buyer: 1. electronic, clothes brand, premium tyre , bigbike and motosport
Supplier: Solar equipments, laser equipments, instruments and meters and so on
Supplier: We are an export company that specializes in the sales of tourmalines, topaz, cow/ox gallstones, sesame seeds, cashew nuts, charcoal,bitterkola/kolanuts. charcoal, palm kernel, honey, donkey skin, bamboo, brooms stick, hard wood, soko wood, yams, vegetables, kaolinite, ofada rice, moringa seeds, okra, palm oil, cassava chips, snails, sold mineral, cashew nut, cocoa, fresh ginger, iron ore, castor seeds, arabic gum, hibicus flowers
Services: Logistics
Buyer: Electrical/electronic, health products/equipment solid minerals,car, truck head, tractor, business partner
