S&A water chiller CW-6000 with 3KW cooling capacity and environmental refrigerant
CW-6000 chillers are producing by S&A company.
S&A water chiller CW-6000 has 3000W cooling capacity with stability, water filter installed and r410a refrigerant loaded. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. S&A chiller has excellent laboratory testing system, simulates actual working environment for chiller.
CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
Supplier: White Cement, White Clinkers, Petroleum Products, Urea, Electronics, Camera And Printers, Organic Waste Treatment Products ( Antizyme Eco Enzyme Bacteria, To Avoid The Blockage And Avoid The Bad Smell From The Wastage Area )
Buyer: Photographic camera, printers, gaming consoles etc
POM regrind black color full container available POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin: High hardness Bearing good Low friction number High resistance to abrasion High temperature resistant Less water intake Has anti-static ability Dimensional stability, little change Less smoke burns when burning High glossy surface High crystallization In addition to the priority points, POM plastic also has some limited formats such as: Quality acid resistance and alkali High hatch rate when changing secretions Operation mode Heat range MATERIAL: POM regrind black color full container available CATEGORY: POM TYPE: Regrind GRADE: Black color SPECIFICATION: 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
S&A water chiller system CW-6200 with 5.1KW cooling capacity CW-6200 series is high-precision compression refrigeration water chiller producing by S&A company. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture. Features of CW-6200: 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5 precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 5. Multiple power specifications; CE, RoHS and REACH approval; 6. Long working life and simple operation; 7. Optional heater and water filter. CW-6200 parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 69Kgs; G.W: 79Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
S&A industrial water chillers CW-6300 support ModBus communication CW-6300 chiller is producing by S&A company. S&A has independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. With 15 years development, gradually grow as the industry standard builder and quality guarantee. CW-6300 chiller features: 1. 8500W cooling capacity; optional environmental refrigerant; 2 precisely temperature control; 3.The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4.Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 5.Multiple power specifications; CE,RoHS and REACH approval; 6. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller.7.Long working life and simple operation; Optional heater and water filter. CW-6300 parameter: Voltage:1P 220V/3P 380V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.37~1.1KW; Tank capacity:45L Max. lift: 28~53M; Max. flow: 70L/min- 116L/min N.W: 165Kgs; G.W: 210Kgs; Dimension : 83 X 65 X 117 cm (L X W X H); Packing dimension: 111 X 85 X 140 cm(L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
S&A refrigeration water chiller for wire EDM machine S&A refrigeration water chiller CW-6000 has 3000W cooling capacity with ±0.5â?? stability, it is fit for wire EDM machine.It has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. Water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) About S&A Brand S&A produces more than 60000 units of industrial chillers by year,we always insist onâ?�Quality Firstâ?� in design and production. â??S&Aâ?� and â??TEYUâ?� have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad,and export rate reaches above 60%.
S&A water-cooled chiller CW-3000 AC220V, 50Hz for co2 laser or CNC spindle S&A CW-3000 series thermolysis type water-cooled chiller has compact design,with energy saving,high cost performance,good protection and alarm system. CW-3000 features: 1. Radiating capacity: 50W / â??; 2. Small thermolysis water cooler, energy saving, long working life and simple operation; 3. With completed water flow and over high temperature alarm functions; 4. Multiple power specifications; CE,RoHS and REACH approval; S&A CW-3000 water chiller video: http://www.teyuchiller.com/Article/SAindustrialwaterchillercw-3_1.html Specification: CW-3000AG: applied to cool a single 80W CO2 laser tube (emitting rate lower than 60%) CW-3000AH: applied to cool dual 1.5 KW CNC spindles or welding equipment; Voltage:110V-220V Frequency: 50/60Hz Tank capacity:9L Max. lift:10M-70M; Max. flow: 10L/min- 2L/min N.W: 9.5Kgs; G.W: 12Kgs Dimension : 49 X 27 X 38cm (L X W X H) Packing dimension: 59 X 39 X 48cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages:1. With 11 patent certificatesCE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warrenty 2.±0.1â?? high precision temperature control, stable cooling performance,support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages:1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Anual ouput 60,000 units,product exports rate above 60% 3. Standard bulk production,standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller.
S&A CW-5000 small portable chiller with compact size, long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in 0.3 precision. It's mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
S&A CW-3000,CW-5000,CW-5200 chiller stock in USA and Europe CW-3000,CW-5000 and CW-5200 chiller is produced by S&A company . S&A CW-3000 series thermolysis type water cooler has compact design, with energy saving, high cost performance, good protection and alarm system. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted. It is applied for cooling 80W laser tube or 2*1.5KW CNC spindle. S&A CW-5000 and CW-5200 chiller both are refrigeration type industrial water chiller CW-5000 has 800W cooling capacity, it is applied for cooling 100W CO2 laser You can visit the CW-5000 video: CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) S&A brand CW-5200 water coolers cooling capacity up to 1.4KW, it is applied for cooling 5W-10W solid-state laser, 5W-10W solid-state laser, 8KW CNC spindle, 50W-75W laser diode, a single15W-30W solid-state laser or a single 30W RF laser tube. Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 26Kgs; G.W: 29Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
