S&A water chiller CWFL-1500 for cooling 1500W metal fiber laser machine
Laser industrial refrigeration chiller CWFL-1500 is produced by Guangzhou Teyu Electromechanical Co., Ltd. For over 16 years in screening and training, we integrate lots of superior components suppliers. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term.
CWFL-1500 is special for cooling 1500W metal fiber laser cutting & engraving machine.
S&A dual temperature chiller model CWFL-1500 is high-precision compression refrigeration industrial cooling system,with intelligent temperature control,completed configuration,perfect protection and alarm system. It is applied for cooling 1500W fiber laser. S&A CWFL-1500 is able to cool the fiber laser and QBH connector at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. CWFL-1500 chiller features:
1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; Water chiller parameter:
Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a
Pump power: 0.55KW; Tank capacity:15L
Max. lift:45M; Max. flow: 70L/min
N.W: 86Kgs; G.W: 96Kgs;
Dimension : 78 X 47 X 89 cm (L X W X H); Packing dimension: 87 X 60 X 109 cm(L X W X H)
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Laser cutting (84561000)
Olympus CV-170 Video Processor and LED Light Source You can only treat what you can see. HD videoscopes have quickly become the standard in many ENT procedures due to the ability to examine mucosal patterns with greater clarity than traditional fiber or SD videoscopes. For the first time ever, HD laryngoscopy is now available to the patients who need it most at the point where it is most valuable: diagnostic laryngoscopy in the office. With LED light, HD scope support, and Narrow Band Imaging (NBI) built into one, compact box, the CV-170 provides physicians with exceptional diagnostic tools at an affordable price for any office.
S&A chiller for high power fiber laser system of 1KW capacity S&A CW-6200AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system, it is applied to cool high power fiber laser system of 1KW capacity. S&A CW-6200AT is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. 0.5 precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; REACH approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Model CW-6200AT CW-6200BT Voltage 220V 220V Frequency 50Hz 60Hz Current 2~13A Compressor power 1.68KW 1.65KW 2.24HP 2.2HP High + low temp system refrigeration capacity 1706 Btu/h+15820 Btu/h 1706 Btu/h+15940 Btu/h 0.5 KW+4.63 KW 0.5 KW+4.67 KW 430 Kcal/h+3986 Kcal/h 430 Kcal/h+4016 Kcal/h Refrigerant R-22 / R-410a Refrigerant charge 1300g 1300g Precision 0.5 Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm High + low temp pump power 0.1KW + 0.55KW High + low temp tank capacity 4L + 12L High + low temp pump lift 25M + 36M High + low temp inlet and outlet Rp1/2" + Rp1/2" High + low temp pump flow 16L/min + 70L/min N.W 92Kgs G.W 102Kgs Dimension 78 x 47 x 89 cm (L x W x H)
S&A water-cooled chiller CW-3000 AC220V, 50Hz for co2 laser or CNC spindle S&A CW-3000 series thermolysis type water-cooled chiller has compact design,with energy saving,high cost performance,good protection and alarm system. CW-3000 features: 1. Radiating capacity: 50W / â??; 2. Small thermolysis water cooler, energy saving, long working life and simple operation; 3. With completed water flow and over high temperature alarm functions; 4. Multiple power specifications; CE,RoHS and REACH approval; S&A CW-3000 water chiller video: http://www.teyuchiller.com/Article/SAindustrialwaterchillercw-3_1.html Specification: CW-3000AG: applied to cool a single 80W CO2 laser tube (emitting rate lower than 60%) CW-3000AH: applied to cool dual 1.5 KW CNC spindles or welding equipment; Voltage:110V-220V Frequency: 50/60Hz Tank capacity:9L Max. lift:10M-70M; Max. flow: 10L/min- 2L/min N.W: 9.5Kgs; G.W: 12Kgs Dimension : 49 X 27 X 38cm (L X W X H) Packing dimension: 59 X 39 X 48cm (L X W X H) About S&A Brand S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees. Why choose S&A Product Advantages:1. With 11 patent certificatesCE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warrenty 2.±0.1â?? high precision temperature control, stable cooling performance,support ModBus-485 communication; 3. Establish logistic warehouses at USA and Europe; Manufacturing Advantages:1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller; 2. Anual ouput 60,000 units,product exports rate above 60% 3. Standard bulk production,standard parts rate up to 80% 4. With excellent laboratory testing system, simulates actual working environment for chiller.
Supplier: Textile products, colour dyes, handloom products, cotton yarns, fabrics, agro chemicals, organic chemicals, inorganic chemicals, pesticides, plastic household products, plastic polymers, fibers raw materials, fibers products, engineering products, mineral & metallurgy products, electronic products, consumer electronics products, cereals, halal products, dairy products, stationary products, beauty and cosmetics products, furniture, gardening tools, tiles & sanitaryware, flavour and fragrances, construction products, kraft paper rolls, grocery items, kitchen utensils, pipes & fittings, paper and pulps products, spices, empty glass bottles, stainless steel products, hardware products, and many more.
S&A CW-6200AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system, it is applied to cool 1KW laser source of IPG, MaxPhotonics and nLIGHT. S&A CW-6200AT is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5â?? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; REACH approval; 8. Long working life and easy operation; 9. Optional heater and water filter. Model CW-6200AT CW-6200BT Voltage 220V 220V Frequency 50Hz 60Hz Current 2~13A Compressor power 1.68KW 1.65KW 2.24HP 2.2HP High + low temp system refrigeration capacity 1706 Btu/h+15820 Btu/h 1706 Btu/h+15940 Btu/h 0.5 KW+4.63 KW 0.5 KW+4.67 KW 430 Kcal/h+3986 Kcal/h 430 Kcal/h+4016 Kcal/h Refrigerant R-22 / R-410a Refrigerant charge 1300g 1300g Precision ±0.5â?? Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm High + low temp pump power 0.1KW + 0.55KW High + low temp tank capacity 4L + 12L High + low temp pump lift 25M + 36M High + low temp inlet and outlet Rp1/2" + Rp1/2" High + low temp pump flow 16L/min + 70L/min N.W 92Kgs G.W 102Kgs Dimension 78 x 47 x 89 cm (L x W x H) Package dimension 87 x 60 x 109 cm (L x W x H)
S&A CW-5000 small portable chiller with compact size, long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in 0.3 precision. It's mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
S&A chiller with temperature control for diode-pumped laser S&A CW-6000 chiller has 3000W cooling capacity with 0.5 stability, it is fit for diode-pumped laser.It has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm. S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years. Water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)
