Linture Technology Co,. Ltd.

AC/DC Common Mitsubishi Protector CP30-BA For Protection Circurt
Include motors, filters, detailed drawings and instructions, all included in one single shipment.

The rated insulation voltage of CP30 is 250V , Rated impulse withstand voltage is 2.5 kvThe rated ambient temperature is 40 The action mode is S- Model .

There are two wiring modes:

Main body: below 20A : screw terminal M4

30A : screw terminal M5

Adapter for mounting DIN rail.
For q38b-e.q312b-e, q612b, q38rb, q68rb, q65wrb, q38db, q312db. 4-axis, sscnet sub connected q26udvcpu parameter specification. 2-axis / 3-axis / 4-axis linear interpolation. 2-axis arc interpolation.
Control unit: mm, inch, degree, pulse. Number of positioning data: 600 data / axis. 40 pin connector.
Wiring is saved through sscnet sub cable connection, and the distance between stations can reach 50mq
The parameter specification of the position system that supports the determination of the origin position through the origin return data setting operation. In addition, the upper limit switch, lower limit switch and near point stop signal input can be directly connected to the servo amplifier, which greatly reduces the wiring demand. Easily realize high-speed positioning control. Support multiple types of positioning control,
Including q26udvcpu parameter specifications such as 2-4-axis linear interpolation, 2-axis circular interpolation, speed control, speed / position switching control, path control, constant speed control, etc.
In addition, software such as can be used,
It is convenient for positioning, setting, monitoring and debugging. RS-232 2ch The programmable controller can be programmed and monitored through the RS-232 serial communication programming tool of qj71c24n
Qj71c24n has the function corresponding to the public telephone line modem. It can initialize the modem used and connect with the object device.
Q26udvcpu (communication with built-in Ethernet port) communicates through remote equipment, programming tools, modems and public telephone lines.
Using the remote password function,
Access to the Q series PLC via the modem function of qj71c24n can be blocked.
Serial communication module q26udvcpu that can collect / change the data of programmable controller, monitor / manage the collection of measurement data, etc. (internal Ethernet port communication chapter).
It can realize high-speed and high-capacity communication with high speed of 230.4kbps and large 960 words (in MC protocol communication).
The MC protocol can be used to read / write data in the programmable controller through external devices (PC, display, etc.).
By selecting the non sequential protocol and using the sequential program for communication control, between the programmable controller and the external equipment (bar code reader, measuring equipment, etc.),
Use the local protocol of the external device to communicate with it (Communication Chapter of built-in Ethernet port). Capacity: 8m bytes. Support SD memory card.
High speed universal qcpu supports SD memory card,

Detail Information
The next generation servo product J4 is launched with safety specifications and eco correspondence. This product not only aims at the fastest speed in the industry, but also introduces the concept of the integration of human, machinery and environment into this product.
Mechanical aspect: the fastest speed frequency response performance of 2.5KHz in the industry is combined with the standard system equipped with 4194304 (22bit) decomposition for absolute position detector equipped with rotary servo motor.
Human aspect: towards human safety and comfortable environment, safety specifications correspond to the enrichment of easy to user design.
Environment: multi axis integrated servo driver with advanced function in eco era.
Inheritance: the combination of servo driver and controller of the previous model has a very corresponding design.
Characteristic
Online products
Generally, rotary servo, linear servo and direct drive servo correspond to the specifications of economic and environmental protection models with 2-axis integration and 3-axis integration.
SSCNET H
Equipped with latest servo communication network, the data communication is the evolution of full duplex 150Mbps, the high response acceleration of the system, and the new generation products of optical fiber network are launched at the same time as J4.

Driver: mr-h ACN series ssc-net compatible AC same service rated output: 0.2KW
The same server controller can easily convert the operation module and Fieldbus module through the automation interface
At the same time, different fieldbus modules are used to realize different control modes (RS232, RS485, optical fiber, INTERBUS and PROFIBUS), while the control mode of general frequency converter is compared with single-mr-pwcns5.
The servo controller is directly connected to the resolver or encoder to form a closed-loop mr-pwcns5 for speed and displacement control, while the general frequency converter can only form an open-loop control system mr-pwcns5
The control indexes of servo controller (such as steady-state accuracy and dynamic performance) are better than general frequency converter. Optical fiber length: 0.5m. Sscneti application cable (standard optical fiber used in the control cabinet).
Connector for cn1a and cn1b, Shenji general AC servo amplifier melcervo-j3 series mr-pwcns5, rated output: 5.0kw.
Interface type: sscnet optical fiber communication type. Power specification: three-phase AC400V.
By using sscnet III high-speed serial communication with the fastest communication cycle of 0.44ms between the motion controller and the servo amplifier, a fully synchronous control system can be constructed.
Just insert the special optical fiber into the connector to form the sscnet network, which greatly reduces the wiring work and the possibility of miswiring.
Due to the use of optical fiber communication, the anti noise ability is greatly improved, and the original mr-pwcns5 can realize long-distance wiring up to 800m (the maximum 50m x16 axis between stations)
Provide servo amplifier mr-j3-b-rj006 meeting the full closed-loop control function. It is suitable for the optimization and adjustment of the same clothes of dry machinery
More advanced optimization adjustment function and control function to maximize the mechanical performance. Electric general AC servo amplifier melcervo - J3 series.
Rated output: 7.0kw original mr-pwcns5 interface type: sscnet optical fiber communication type. Special specification: full closed loop control type. Power specification: three phase ac200v. High precision and high response positioning control.
The full closed-loop control with high response can be realized through double feedback control,
The dual feedback control can be performed when switching between the servo motor encoder and the load side encoder. Mr-j3-b-rj006 can be used with linear encoders from many manufacturers.
Users can build the original mr-pwcns5 system according to their own accuracy requirements. The ABS linear encoder with serial interface can easily build an absolute position detection system without installing a battery on the servo amplifier.

Detail of Goods:
1-axis servo amplifier.
universal AC servo amplifier melcervo-j4 series. Rated output: 0.1kw. Interface: sscnet / h. Power supply: single phase AC100V power supply
Only for servo amplifiers below 0.4KW, PLC and servo. Special specifications: CC linkle is supported Field network motion control supports the co server amplifier of CC linkle field network.
Ethernet based open network, supporting motion control mr-j4-350b
It not only inherits the high performance and high reliability of the original products, but also makes further improvements beyond imagination, Mitsubishi PC and servo. Melcervo-j4 weight reduction debut.
The future star of the same service market. World class servo products,
What should the new generation of melcervo be like The answer to the question has floated
Out of the water. Melcervo-j4. It represents another evolution based on the original high performance after full digitization. It is also the latest masterpiece of melcervo, which fully meets the requirements of human and environment. For example, the safety specification and easy to use design for human use safety and environmental protection. Energy saving performance to meet the needs of the era of environmental protection.
Melcervo-j4, the evolution of zhaoyue performance, is shocking 1 axis co serving amplifier. A Tonga AC co service amplifier melcervo-j4 series. Rated output: 11.0kwmr-j4-350b. Interface: sscnet h. Power supply: three-phase ac200v.
Servo amplifier supporting sscnet / h.
A fully synchronous system using high-speed serial optical communication can be established.
It can be combined with servo system controller to maximize the functional performance of servo system and improve mechanical performance through high-performance motor.
By improving the resolution and processing speed of the encoder,
Make the rotary servo motor have higher precision positioning performance and smoother rotation performance mr-j4-350b.
Just turn on the one click adjustment function to adjust the servo gain including mechanical resonance wave pusher, high-end seismic control II and low-pass filter. Easily start the advanced anti-seismic function to maximize the mechanical performance.
And it can automatically implement the response setting required for real-time automatic adjustment. Mr-j4-350b, cable length:

Detail of Goods:
The working principle of the cooling fan is realized according to the energy conversion, namely: electric energy electromagnetic energy mechanical energy kinetic energy. The circuit principle is generally divided into various forms. The performance of the fan will be different with different circuits.
Bearing structure
brief introduction
The common bearings of cooling fan are: ball bearing, oil bearing and magnetic bearing.


Ball bearing
Ball bearing changes the friction mode of the bearing and adopts rolling friction. There are some steel balls or steel columns between the two iron rings, supplemented by some grease lubrication. This method more effectively reduces the friction between the bearing surfaces and effectively improves the service life of the fan bearing. Therefore, the heating capacity of the radiator is reduced and the service life is prolonged. The disadvantage is that the process is more complex, resulting in higher cost and higher working noise.


Oil bearing
Sleeve bearing is a sleeve bearing that uses sliding friction and uses lubricating oil as lubricant and drag reducer. It can be said that it is the most common bearing technology in the market. Due to its low cost and simple manufacture, many products, including well-known brands, are still in use. The utility model has the advantages of quiet in initial use, low noise and low price.


magnetic bearing
The motor of magnetic bearing adopts magnetic system (MS) design, which uses magnetic force to suspend the rotor in the air, so that there is no mechanical contact between the rotor and the stator. The principle is that the magnetic induction line is perpendicular to the magnetic levitation line, and the shaft core is parallel to the magnetic levitation line, so the weight of the rotor is fixed on the running track, and the almost unloaded shaft core is used to support in the direction of the anti magnetic levitation line to form the whole rotor suspended on the fixed running track. Compared with the traditional ball bearing and oil bearing, the magnetic bearing has no mechanical contact, and the rotor can run to a very high speed. It has the advantages of low mechanical wear, low energy consumption, low noise, long service life, no lubrication and no oil pollution. It is especially suitable for special environments such as high speed, vacuum and ultra clean. In fact, magnetic levitation is only an auxiliary function, not an independent bearing form. The specific application must cooperate with other bearing forms, such as magnetic levitation + ball bearing, magnetic levitation + oil bearing, magnetic levitation + vaporization bearing and so on.

Detail of Goods:
Product description of fr-e740-1.5k-cht:

Fr-e740-1.5k-cht is an economical and high-performance type, 3-phase 400V power supply, and the motor capacity is large and suitable for three standard 4-pole motors

Detailed parameters of fr-e740-1.5k-cht

1. Power of fr-e740-1.5k-cht: 1.5kw

2. Current of fr-e740-1.5k-cht: 4A

3. Voltage of fr-e740-1.5k-cht: 3-phase 380 ~ 480v

4. Frequency of fr-e740-1.5k-cht: 50Hz / 60Hz

5. Allowable fluctuation range of voltage and frequency of fr-e740-1.5k-cht: 325 ~ 528v50hz / 60Hz (plus or minus 5%)

6. Power capacity of fr-e740-1.5k-cht: 4.5KVA

7. Overload capacity of fr-e740-1.5k-cht: 150% 60s, 200% 3S (inverse time characteristic)
8. Installation dimension of fr-e740-1.5k-cht: 140mm * 150mm * 135mm

9. Approximate weight of fr-e740-1.5k-cht: 1.9kg

10. Cooling mode of fr-e740-1.5k-cht: forced air cooling

In order to prevent electric shock, the motor and frequency converter must be grounded before use.

Do not install the incoming capacitor or surge suppressor, radio noise filter to the output of the frequency converter. This will lead to the failure of the frequency converter or the damage of the capacitor and surge suppressor. If any of the above equipment has been installed, please remove it immediately. When it is necessary to set a non fuse circuit breaker at the output end, please consult the manufacturer for the selection of non fuse circuit breaker.

With regard to electromagnetic wave interference, the input / output (main circuit) of the frequency converter contains high-frequency components, which may interfere with the communication equipment near the frequency converter (such as AM radio). Therefore, EMC filters are installed to minimize interference.

For details of peripheral devices, please refer to the user manual of each option and peripheral device.

PM motor cannot operate on power frequency power supply.

Because PM motor is a motor with built-in permanent magnet, even when the power supply of frequency converter is disconnected, as long as the motor is still rotating, high voltage will be generated at the motor terminal. When the output switch is closed, turn on the power supply of the frequency converter and use it when the motor is stopped.

Qx80h is q series DC high-speed input module, negative common terminal type, 16 points. Qx80h price (face price), the market stock is very small.
Qx80h Parameter Description: 24VDC / 4mA, common cathode, 16 points, terminal block (high speed).
Specification details of PLC module qx80h:
DC input module negative common end
input points 16 points
isolation method Optocoupler
rated input voltage DC24V 20% - 15%, ripple coefficient above 5%)
rated input current about 6mA
derating chart
on voltage / on current 13V or higher / 3mA or higher
off voltage / off current 8V or less / 1.6mA or less
function setting SW2 off interrupt, on high speed input
dielectric withstand voltage 560vac MS / 3 cycles (altitude 2000m (6557.38 feet))
[insulation resistance] 10m or higher measured by insulation resistance tester
through 1500vp-p noise voltage, 1 Voice simulator with s voice width and 25 to 60Hz voice frequency
First instantaneous voice iec61000-4-4: 1kV
protection grade IP2X
common terminal arrangement 8 points / common terminal common terminal: tb9, tb18
I / O points 16 I / O allocation is set to 16 point high-speed input module or interrupt module
working status indicator set by setting in GX developer switch
running indicator on indication (LED)
external connection 18 point terminal block (M3 6 screw)
applicable wire diameter core 0.3mm2 to 0.75mm2 (maximum outer diameter 2.8mm)
applicable to clamping terminal R1 25 ~ 3 clamping terminal with sleeve cannot be used
5VDC internal current consumption 80mA standard: all points on
overall dimension h w d 98 * 27.4 * 90 mm
weight 0.16kg

Question: How do I prevent my drive from tripping on an OV fault (overvoltage) while my motor is ramping down?

Answer: Increase deceleration time parameter C1-02.





Question: How do I prevent my drive from tripping on an OL1 fault (overload) while my motor is ramping down?

Answer: Verify motor rated current parameter E2-01 and motor overload parameter settings L1-01 Motor overload selection, L1-02 Motor overload protection time.





Question: I want to run my motor above the nominal motor speed?

Answer: Increase the value of parameter E1-04 Maximum Frequency





Terms:

Common types of Mitsubishi frequency converter
Fr-d700 series
Fr-d700 series frequency converter is a compact multi-function frequency
converter.
1. Power range: 0.4~7.5kw;
2. General flux vector control, 150% torque output at 1Hz;
3. Adopt long-life components;
4. Built in Modbus RTU protocol;
5. Built in braking transistor;
6. Expand PID and triangle wave function;
7. With safety stop function.
Fr-e700 series
Fr-e700 series frequency converter is an economical high-performance frequency
converter.
1. Power range: 0.1~15kw;
2. Advanced flux vector control, 200% torque output at 0.5Hz;
3. Extended PID, flexible PWM
4. Built in Modbus RTU protocol;
5. Stop accuracy is improved;
6. Add option card fr-a7nc to support CC link communication;
7. Add option card fr-a7nl to support LonWorks communication;
8. Add option card fr-a7nd, which can support deveice net communication;
9. Add option card fr-a7np to support PROFIBUS DP communication.
Fr-a740 series
1. High precision torque / speed / position control can be carried out in
closed loop;
2. Sensorless vector control can realize torque / speed control;
3. Built in PLC function (special model);
4. Use long-life components with built-in EMC filter;
5. Powerful network communication function, supporting DeviceNet, PROFIBUS DP,
MODBUS and other protocols.
Fr-f740 series
1. Power range: 37~220kw;
2. Simple magnetic flux vector control mode, achieving output torque of 120% at
3Hz;
3. Better excitation control mode is adopted to realize higher energy-saving
operation;
4. Built in PID, frequency converter / power frequency switching and multi pump
circulating operation function;
5. Built in RS485 communication port;
6. Use long-life components;
7. Built in noise filter (above 75K);
8. With energy-saving function, the energy-saving effect is clear at a glance.

Detail of Goods:
Three phase three wire type.
Number of measuring circuits: 1 circuit.
Measurement items: power consumption (consumption and regeneration), current, voltage, power, power factor, etc. it is a product group of elevtric energy measurement modules that can simply measure a variety of energy information.
With only one module, you can measure various detailed information related to power (consumption and regeneration), reactive power, current, voltage, power, power factor and frequency. 1 / O module user manual.
The minimum and maximum values can be continuously monitored without ladder program, and two types of upper / lower limit alarm qh42f can be executed. The power used by the output device can be measured only during the on state. Therefore, the power during the operation of the equipment and the power in the beat unit can be obtained. Using 3-phase 3-wire products in one slot can measure up to 4 circuits, and using 3-phase 4-wire products can measure up to 3 circuits
Therefore, through multi circuit products, electric energy measurement can be implemented in a small space. | / O module user manual. For example, one module can be used to measure other loads from the control panel trunk line.
In addition, GX works2 (version 1.90u and higher) can be used to easily set parameters and bidirectional controllable brick output; 32 o'clock. Rated current and voltage: AC100 ~ 240V_ 0.6a/1 point, 2.4a/1 public end, 8:1 public end Mitsubishi | / O module user manual. Response time: 1ms 0.5 cycle.
External wiring connection mode: 38 point terminal block (terminal block is sold separately). Replacement model: ay23, output: 2 channels,
Input (resolution): 0 ~ 4000: - 4000 ~ 4000:0 ~ 12000-12000 ~ 12000: - 16000 ~ 16000 output: DC-10 ~ 10V: dc0 ~ 20maqh42p user manual. Conversion speed: 80us / 1 channel. 18 point terminal block.
Transformer isolation between power supply and output. High insulation strength and withstand voltage.
It can isolate electrical interference, such as current and noise. Standard analog input module. Isolated analog input module. No external isolation amplifier is required.
When the inter channel isolated analog quantity module is not used.
Qh42p user manual when using inter channel isolated analog module. Expand the possibility of control with intelligent functions.
Provide various analog modules, which is an ideal choice for process control applications. It can also meet the needs of high-speed and high-precision control.

RS-232C communication function expansion board. Series Name: f920got with keys, with a series of effective functional modules. System screen display language: English. Display: 2.6 inches.
Display color: monochrome (blue / white) fr-a8nc parameter setting tutorial. Display device: STN LCD Resolution: 128X64 points. Installation type: panel installation.
Built in communication port: RS-422 (1ch) / RS-232C (1ch) fr-a8nc power supply voltage: DC5V.
Touch screen refers to the field or interface where people and machines contact or interact in information exchange and function. The man-machine interface refers to the hard contact and soft contact between people and machines,
This joint surface includes not only the direct contact between points, lines and surfaces, but also the function space of long-distance information transmission and control, fr-a8nc parameter setting tutorial.
The man-machine interface is the central link in the man-machine system,
It is mainly studied and put forward the basis for solution by safety ergonomics, a branch of safety engineering, and has passed safety engineering and equipment engineering,
Safety management engineering and safety system engineering to study specific solutions and measures safety ergonomics fr-a8nc parameter setting tutorial. RS-232C through adapter. (fx1n-cnv-bd is required).
(common to fx1s and FX1N hosts). It can be isolated from the output of programmable controller for a / B / C contact relay, SSR and tr output. Input points: 14 points.
Output points: 10 points fr-a8nc (type selection data). Power supply voltage: AC100-240V. Output type: relay output.
Built in CPU, power supply, input and output. Improve performance while maintaining FX1N convenience. Fx3 series special adapter and function expansion board can be installed. High speed operation processing.
Basic instruction: 0.21us/instruction. Application instruction: 0.5us/instruction. Large capacity memory.
There are 32000 steps of fr-a8nc in the internal program memory (type selection reference material).
EEPROM memory box with program transfer function can be used. Input and output points: 16 points. Input points: 8 points. Input specification: drain type. Output points: 8 points.
Output form: relay output. Power consumption: 6W. Weight: 0.25kg.
Overall dimension: 34x90x87mmfr-a8nc (type selection data). The third generation micro programmable controller of jiancuo type. Connector type input / output type economizer.
It has greatly strengthened the high-level built-in functions such as high-speed processing and positioning in the industry. Space saving model with high cost performance.
Fx3uc not only saves space and wiring, but also greatly strengthens the internal harm functions such as high-speed processing and positioning. The host has built-in DC24V power supply and transistor output in the form of connector input and output.

New leakage circuit breaker


Ew32 type ew63 type ew125 type ew160 type ew250 type ew400 type ew630 type EW800 type
Ew50 type ew100 type


Ew32 and ew50 (standard products)
Basic models: ew32aag-2p, ew32aag-3p, ew32eag-3p
Rated current a (code): 5 (005), 10 (010), 15 (015), 20 (020), 32 (032)
Reaction current MA (code): 15 (a), 30 (b), 100 (c)


Basic models: ew50aag-2p, ew50aag-3p, ew50eag-3p
Rated current a (code): 5 (005) 10 (010) 15 (015) 20 (020) 32 (032) 40 (040) 50 (050)
Reaction current MA (code): 15 (a), 30 (b), 100 (c)
Note: ew50eag-3p reaction current MA (code): 15 (a) 30 (b) 100 / 200 switching (k)
Basic model: ew32sag-3p
Rated current a (code): 3 (003) 5 (005) 10 (010) 15 (015) 20 (020) 32 (032)
Basic model: ew50sag-3p
Rated current a (code): 5 (005) 10 (010) 15 (015) 20 (020) 32 (032) 40 (040) 50 (050)
Basic model: ew50rag-3p
Rated current a (code): 10 (010) 15 (015) 20 (020) 32 (032) 40 (040) 50 (050)
Reaction current MA (code): 30 (b), 100 / 200 / 500 switching (k)



Ew63 and ew100 (standard products)
Basic model: ew63eag-3p
Rated current a (code): 63 (063)
Sensitivity current MA (code): 15 (a) 30 (b) 100 / 200 switching (k)


Basic model: ew63sag-3p, ew63rag-3p
Rated current a (code): 63 (063)
Sensitivity current MA (code): 30 (b), 100 / 200 / 500 switching (k)

Circuit breaker refers to the switching device that can close, carry and disconnect the current under normal circuit conditions, and can close, carry and disconnect the current under abnormal circuit conditions within a specified time. Circuit breakers are divided into high-voltage circuit breakers and low-voltage circuit breakers according to their scope of use. The division of high-voltage and low-voltage boundaries is relatively vague. Generally, those above 3KV are called high-voltage appliances.


The circuit breaker can be used to distribute electric energy, start the asynchronous motor infrequently, and protect the power line and motor. When they have serious overload, short circuit, undervoltage and other faults, it can automatically cut off the circuit. Its function is equivalent to the combination of fuse switch and over and under heating relay. Moreover, it is generally not necessary to change the parts after breaking the fault current. At present, it has been widely used.


Power distribution is an extremely important link in the generation, transmission and use of electricity. The distribution system includes transformers and various high and low voltage electrical equipment, and the low voltage circuit breaker is an electrical appliance with large amount and wide range of use.
working principle
The circuit breaker is generally composed of contact system, arc extinguishing system, operating mechanism, release, shell, etc.


In case of short circuit, the magnetic field generated by large current (generally 10 to 12 times) overcomes the reaction spring, the release pulls the operating mechanism to act, and the switch trips instantaneously. In case of overload, the current increases, the calorific value intensifies, and the bimetallic sheet deforms to a certain extent to promote the action of the mechanism (the greater the current, the shorter the action time).

Maximum Input Current



The instantaneous maximum output of SERVOPACK is approximately 3 times of the rated output for maximum for 3 seconds. Accordingly, select a molded-case circuit breaker whose breaking time is 5 seconds or more at 300% of SERVOPACK rated current. The general-purpose low-speed acting molded-case circuit breakers are applicable.


The power supply capacity per SERVOPACK when using a servomotor is described in 2.5.2 Molded-case Circuit Breaker and Fuse Capacity. Select a molded-case circuit breaker with the capacity larger than the effective load current (when using more than multiple SERVOPACK) calculated from the total power supply capacity.


The consumption of other controllers must be considered when selecting a molded-case circuit breaker




(2) Inrush Current



Refer to 2.5.2 Molded-case Circuit Breaker and Fuse Capacity for SERVOPACK inrush current.


The allowable inrush current for a low-speed acting molded-case circuit breaker is approximately 10 times of the rated current for 0.02 seconds.


When turning ON multiple SERVOPACK simultaneously, select a molded-case circuit breaker with the allowable current for 20 ms larger than the total inrush current shown in 2.5.2 Molded-case Circuit Breaker and Fuse Capacity.

A small remote I / O module used as a remote I / O station for control and communication links (hereinafter referred to as "CC link"). Its features are as follows:


(1) The small remote I / O module reduces the volume while maintaining all the functions of the traditional module.

(2) More models of small remote I / O module series


Waterproof terminals are added to the small remote I / O module series for CC link system. Along with the traditional terminal block type, there are also quick connector type modules and FCN connectors

Type and connector type, now there are five models of products.

In addition to the traditional 16 point and 32 point remote I / O modules, an 8-point type is added, so that users can choose the most appropriate module according to their own purpose and environment.

(3) The 4-wire small remote I / O module is easy to connect to the 4-wire sensor.


It can be easily connected to the 4-wire sensor through the common pin provided on each plug. It is not necessary to install relay terminal block.


For 4-wire small remote I / O modules, one sensor is connected to one plug. Therefore, the sensor can be changed through the plug, reducing the operation steps.

(4) The terminal block connection makes it easy to connect 2-wire and 3-wire sensors or loads.

Because the terminal block connection allows the connection of 2-wire and 3-wire sensors or loads, there is no need for a common connector, which makes the connection easier.

(5) Minimize wiring

(a) Terminal block module

By using the self tightening screw on the terminal block, the wiring steps can be significantly reduced.

(b) Quick connector module, connector module

The wiring steps can be significantly reduced by using the parallel wire pressure wiring method (without welding, stripping the shielding layer and screwing).

(c) FCN connector type module

Wiring steps can be significantly reduced by using 40 pin connectors for I / O parts.

(6) Waterproof remote I / O module has improved waterproof and oil proof effect

The waterproof remote I / O module adopts a protective structure compatible with IP67, which can be used more safely in the presence of water and oil.

Detail of Goods:
qd77ms simple motion moudel models are: qd77ms2, qd77ms4, qd77ms16.
Qd77ms16 Parameter Description: 16 axis; 2 / 3 / 4-axis linear interpolation and 2-axis circular interpolation; Synchronous mode synchronous encoder input, cam, phase correction and automatic cam generation; Control unit: mm, inch, degree, pls; Positioning data 600 / axis; Sscnet / h connects PLC simple motion module qd77ms16 product specification / parameter details
2 / 3 / 4-axis linear interpolation, 2-axis circular interpolation
Speed (PTP) and arc (PTP) control modes can be set Position switching control, position Speed switching control, speed Torque control
mm, inch, degree, pls
600 data / axis can be set through GX works2 and sequence control program
parameters, positioning data and block startup data can be saved through flash memory (without battery)
2. Positioning mode
PTP control: incremental mode / absolute mode
Speed Position switching control: incremental mode / absolute mode
Location Speed switching control: incremental mode
Track control: incremental mode / absolute mode
. positioning range
Absolute mode
214748364.8~214748364.7
-21474.83648~21474.83647(inch)
.0359.99999(degree)
.-2147483648~2147483647(PLS)
In incremental mode
214748364.8~214748364.7( m)
21474.83648~21474.83647(inch)
21474.83648~21474.83647(degree)
2147483648~2147483647(PLS)
Speed Position switching control (inc mode) / position During speed switching control
0~214748364.7( m)
021474.83647(inch).0~21474.83647(degree)
.0~2147483647(PLS)
Speed When position switching control (ABS mode)
.0~359.99999(degree)
. speed command
0.01~20000000.00(mm/min)
0.001~2000000.000(inch/min)
0.001~2000000.000(degree/min)
1~1000000000(PLS/s)
Acceleration and deceleration processing: Trapezoidal acceleration and deceleration, S-shaped acceleration and deceleration
Acceleration and deceleration time: 1 ~ 8388608 (MS) acceleration time and deceleration time can be set in 4 modes
. emergency stop deceleration time: 1 ~ 8388608 (MS)

Detail of Goods:
q series PLC main substrate q312b product specification details
number of I / O modules installed 12
Extensible: extensible
available modules] Q series modules
DC5V internal current consumption 0.13a
mounting hole size M4 screw hole or 4.5 holes (for M4 screws)
accessories mounting screws M4 14, 4 DIN rail mounting adapter sold separately
DIN rail mounting adapter type q6din1


Relevant models
QH series controller qd75mh2 communication module qj71mt91 Mitsubishi speed counting module qd62-h01 Mitsubishi output module qy40p-ts output module qy40p
communication module qj71lp21s-25 q series controller q172cpun QH series controller qd75mh4 I / 0 hybrid module qx41y41p

Detail of Goods:
The built-in oscillator realizes fine step-by-step driving
the special LSI can select any number of subdivisions
in order to protect the subdivision step operation, it can be driven from low speed to high speed (without high-speed counter)
3A / phase high output, high efficiency
analog speed control (0 ~ 5V) can be remotely controlled
aluminum magnesium alloy shell, anti-interference and good heat dissipation
automatic current drop circuit is adopted
Power supply voltage: dc18 ~ 40V (absolute maximum rated voltage: 40V)
Power supply current: 1.2 times of phase current
Motor driving current: 0.3 ~ 3A / phase
Driving mode: special unipolar constant current chopper circuit
Response frequency: 600kppsmax (when speed input 5V)
Automatic current reduction: 0.3 seconds after stopping pulse input, current stop sets the current to 0 ~ 80% during action.
Protection circuit: low current and voltage protection, motor misconnection protection and overheating protection
Subdivision: subdivide the basic steps 1 ~ 80 and set the possible number of divisions (14 in total) 64, 32, 16, 8, 4, 2, 1, 80, 60, 20, 10, 5, 50 and 25
Overall dimension: 63 (H) 105(W) 56(D)mm
Weight: About 250g
Built in pulse stepping motor driver

Common faults of ABB Robot Teaching Pendant
1: ABB Robot S4 and irc5 teaching devices have poor touch or local failure (replace the touch panel)
2: ABB Robot S4 and irc5 teaching pendant have no display (repair or replace internal mainboard or LCD)
3: Poor display of ABB Robot S4 and irc5 teaching pendant, vertical line, vertical belt, flower screen, broken, etc. (replace LCD screen)
4: The keys of ABB Robot S4 and irc5 teaching pendant are poor or ineffective (replace the key panel)
5: Whether the teaching pendant of ABB Robot S4 and irc5 has display backlight (replace the high-voltage board)
6: The XYZ axis of the control lever of ABB Robot S4 and irc5 teaching pendant is poor or ineffective (replace the control lever)
7: The emergency stop button of ABB Robot S4 and irc5 teaching pendant is invalid or ineffective (replace the emergency stop button)
8: The data lines of ABB Robot S4 and irc5 teaching pendant cannot communicate or be powered on, and there are broken lines inside (replace the data line)
ABB Robot parts and spare parts:
ABB teaching box 3hne00313-1 m1998 M2000 teaching pendant
ABB Robot Teaching box 3hac023195-001
ABB Robot irc5 teaching pendant dsqc679 3hac028357-001
ABB teaching pendant 3hab5386-1
ABB teaching pendant cable 3hac031683-001
ABB teaching pendant lever jc2000-0049 t (SPL) - xyz-popop-25-spl-spl-n
ABB drive 3hab8101-13 / 07B
ABB teaching box LCD 3hnp04014-1
I / O signal input and output board 3hac025784-001 dsqc651
I / O signal input / output board dsqc652 3hac025917-001
ABB Robot IO board 3hea800439-002
ABB interface board dsqc327a 3hac17971-1
ABB I / O mainboard dsqc 328a 3hac17970-1
ABB Robot I / O interface board dsqc327 3hab7230-1
ABB IRB 6400 main computer board dsqc 540 3hac14279-1
ABB industrial robot teaching board 3hne00313-1 main board 3hne30055
ABB Robot control board dsqc611 3hac13389-2
DSQC643 3HAC024488-001 ABB M2004 IRC5
ABB Robot base plate 3hac14363-1 / 00 dsqc541
ABB irb6400 computer board 3hac02347-001 / 01 dsqc532b I / O computer

Detail of Goods:
Function of braking resistance: 1 Protect the frequency converter; 2. Protect the power network. Braking resistance is a kind of ripple resistance, which is mainly used in the mechanical system of frequency converter controlling the rapid shutdown of motor. The firecracker motor converts the regenerative electric energy generated by the rapid shutdown into heat energy. The principle of resistance braking is that the rotor has current flow, which generates torque opposite to the rotation direction in the magnetic field of the stator, consumes the kinetic energy of the train, and achieves the purpose of braking. When the motor or other inductive load driven by the frequency converter stops, it is generally realized by energy consumption braking, that is, the kinetic energy of the motor and the magnetic energy in the coil are consumed through another energy consuming element after stopping, so as to realize rapid shutdown.
Compent:
Ceramic tube: it is the skeleton of alloy resistance wire and has the effect of radiator at the same time


Alloy resistance wire: the flat belt has a wavy shape and is wound on the surface of the ceramic tube, which is responsible for converting the regenerated electric energy of the motor into heat energy


The coating is flame-retardant on the surface of the alloy and has the characteristics of high temperature resistance
Main hazards
During the rapid shutdown of the motor, a large amount of regenerative electric energy will be generated due to inertia. If this part of regenerative electric energy is not consumed in time, it will directly act on the DC circuit part of the frequency converter. If it is light, the frequency converter will report fault, and if it is serious, the frequency converter will be damaged; The emergence of braking resistance solves this problem and protects the frequency converter from the harm of motor regenerative electric energy;
Smooth operation
The braking resistance directly converts the regenerative electric energy in the process of rapid braking of the motor into heat energy, so that the regenerative electric energy will not be fed back to the power network and will not cause grid voltage fluctuation, which plays a role in ensuring the smooth operation of the power network

Product Name: plug set model: mr-ccn1
Content: servo amplifier connector.
Purpose: for mr-je-b input and output signals. Motor series: low inertia, small capacity. Use serial pair / incremental encoder. Rated output power: 0.1kw. Rated speed: 3000rpm. With or without holding brake: without holding brake. Without GB.
Shaft end: straight shaft mr-ccn1.
The rotor inside the servo motor is a permanent magnet. Unw two-phase electricity controlled by the servo amplifier forms an electromagnetic field. The rotor rotates under the action of this magnetic field. At the same time, the motor and its own encoder feed back signals to the driver. The driver compares the feedback value with the target value and adjusts the rotation angle of the rotor mr-ccn1
The accuracy of servo motor depends on the resolution of encoder. Servo motor series: medium inertia, small capacity. Rated output: 7.0kw. Rated speed: 2000r / min
Electromagnetic braking: without Mitsubishi mr-ccn1 oil seal: attached (Note 1, note 2, note 3). Power supply: 200V.
Note 1 It can be supported by hg-kr and hg-mr series above 0.1kw and hg-sr series. Note 2 With reducer, oil seal is not equipped.
Note 3 The boundary dimension standards of hg-kr and hg-mr series servo motors with oil seal are different. Realize the stable driving of medium capacity and medium inertia products.
structural design, mr-ccn1 is realized. High speed & high torque. Shorten positioning time and realize high-speed equipment. Reduce power on torque ripple.
By combining the number of poles and slots of Jiahua motor, the power on torque ripple is greatly reduced, and the smooth and constant speed operation of the equipment is further realized.
To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. Servo motor series: low inertia, medium and large capacity. Rated output: 9.0KW relay connector kit. Rated speed; 3000r/minã?? Electromagnetic braking: without. Power supply: 200V.
Suitable for high frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. High speed & high torque. Shorten positioning time and realize high-speed equipment. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible,
In the configuration of mr-j4 product line, the main rich co service amplifier and co service motor product relay connector kit are provided, which can meet the different needs of different customers. Servo motor series: medium inertia, small capacity. Rated output: 0.85kw.

4-axis, differential driver output type. Control unit: pulse.
Number of positioning data: 10 data / axis. Maximum pulse output: 4mpps. 40 pin connector. Differential output.
Ideal solution for simple multi axis positioning.
Perfect match with stepper motor control gi71e71-100 reference manual. The acceleration and deceleration are smooth and the speed changes slightly.
The speed of starting processing of positioning control is accelerated. Locate the module.
Open collector output type qi71e71-100 differential driver output type
It can be divided into two types: open circuit collector output type and differential driver output type
The output positioning module of the differential driver can reliably transmit the high-speed command pulse (up to 4mpps) to the servo amplifier, and the transmission distance can reach 10m to realize high-speed and high-precision control.
(the maximum command pulse of open collector positioning module is 200kpps.) Reduce system downtime and recovery time.
With a simple operation, you can back up all the data in the CPU to the memory card gi71e71-100 reference manual. Through regular backup, the latest parameters and programs can be saved to the memory card all the time. In case of CPU failure, after replacing the CPU, the system can be restored through simple operation and through the memory card with data backed up in advance.
As a result, there is no need to spend time managing backup data, and the recovery time can be reduced when the system is down. Input and output points: 4096 points. Number of input and output components: 8192 points. Program capacity: 200K steps. Processing speed: 0.0095 us. Program memory capacity: 800KB. Support USB and network. Support the installation of memory card.
High speed communication between multiple CPUs
The fixed scanning interruption time is shortened and the device is high-precision. The minimum interval of fixed cycle interrupt program is reduced to 100US.
It can accurately obtain high-speed signal, and realize high-speed control qj71e71-100 for parallel processing of device communication (cycle is 0.88ms).
The high-speed communication cycle between multiple CPUs is synchronized with the motion control, so the operation efficiency can be maximized. In addition, the performance of the latest motion control CPU is twice that of the previous model
Ensure high-speed and high-precision machine control. Slot 1: no power supply is required: install the large ans series PC module with a thousand. The base plate of ANS series PLC. Qa1s series PLC 1 slot main base plate.
Ans series modules can be installed. rs-232 1ch rs-422/485 1ch

Motor series: low inertia, low power. Rated output power: 0.1kw. Rated speed: 3000r / min. with brake or not: attached.
Shaft end: keyway (slotted position).
Protection level: IP55, excluding the shaft threading part and the basic knowledge of connector hg-kr73j. Features: low inertia, suitable for high frequency operation.
Application examples: inserter, assembly machinery. Motor series: flat type, medium and small power. Rated output power: 0.75KW.
Rated speed: 2000r / minhg-kr73j with brake or not: No. Shaft end: Standard (straight shaft). Protection level: IP65 (IP67).
Features: the flat design makes it more suitable for installation in a narrow space. Application example: basic knowledge of robot and food manufacturing machinery hg-kr73j. High resolution encoder 131072p / rev (17 bits).
High resolution encoder is included to ensure excellent performance and stability at low noise.
All motors are the same size as the previous products and the wiring is compatible. Type: ha-fh series. Rated output: 0.2KW. Rated speed: 3000r / min. Electromagnetic braking: Yes.
The loss control technology of AC co serving motor itself has become increasingly perfect and popular.
From the perspective of real-time operating system, it is only a functional module that needs real-time response processing. The multi-function and intelligent requirements of the dry controller, a large number of signal processing, and the establishment and operation of various mathematical models to meet the needs of control,
Network communication and other functional modules will operate correctly and reliably under the unified scheduling and management of the real-time operating system. Therefore, the next generation of servo drive controller will be the basic knowledge of hg-kr73j. Rated output: 2.0kw
Rated speed: 3000r / min. electromagnetic braking: attached. Power supply: 200V.
Suitable for high frequency operation of medium capacity and low inertia products.
To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt ip65100 sites, and there are 100 different drive controls. In order to meet diversified and detailed on-site needs as much as possible,
In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Type: hc-pq. Output power: 0.2KW.

Ig module is damaged due to poor heat dissipation


The frequency converter makes a sudden sound during operation, and the external connection is burned. It is found that the IGBT module of the frequency converter is damaged after disassembly. Through the test of relevant boards, it is found that the IGBT trigger circuit is damaged, and other plates are normal. When removing the frequency converter board, it was found that there were a lot of oil and dust on the power board and current detection board. Turn on the fan of the heat sink of the frequency converter and see that the heat sink is also covered with oil and sundries, which completely blocks the heat dissipation channel of the frequency converter. It is inferred that the Ig module of the frequency converter is damaged due to poor heat dissipation.


Maintenance process: first, completely disassemble the frequency converter, remove the heat sink of the heat dissipation channel, clean the heat sink with air pressure gas, and clean all the internal structural parts and boards of the frequency converter. Install the IGBT module. When installing the IGBT module, install it in sequence according to the requirements of the module, with appropriate torque. Repair the trigger circuit, and then install other devices in turn. After installation, conduct static test. After the static test results are good, conduct power on test and load test. The on load test is qualified and the maintenance is completed successfully.


Experience summary: Based on the maintenance of several frequency converters in different models and different use environments, it is concluded that the main reason for the damage of frequency converter IGBT module is the poor use environment, which leads to the damage of electronic components on gate drive card and the blockage of heat dissipation channel of frequency converter* The easily damaged devices are voltage stabilizing tube and optocoupler. Check whether there is a problem in the driving circuit. Compare whether the resistance of each trigger terminal is consistent when power is off. The voltage waveform at the trigger end can be measured after power on. However, some frequency converters cannot be started without being installed into the module. At this time, a false load is connected in series at the p-end of the module to prevent the module from being burnt out due to touching the originator or other lines by mistake during inspection.

Proximity switches are widely used in aviation, aerospace technology and industrial production. It is used in daily life, such as automatic doors in hotels, restaurants and garages and automatic hot air fans. In terms of security and anti-theft, important places such as data archives, finance and accounting, finance, museums and treasuries are usually equipped with anti-theft devices composed of various proximity switches. In measurement technology, such as length and position measurement; In the control technology, such as the measurement and control of displacement, velocity and acceleration, a large number of proximity switches are also used.
Ime08-1b5pszt0s Order No.: 1040838 inductive proximity sensor
Trigger sensing distance SN: 1.5 mm
Mounting on metal: flush
Shell shape: Standard
Electrical specification: DC 3-wire
Switching value output: PNP
Switch function: normally open contact
Connection type: plug, M8, 3-pin
E3X-DA11-N
Type: e3x-da11-n Order No.: 1040854 inductive proximity sensor
Trigger sensing distance SN: 2.5 mm
Mounting on metal: non flush
Shell shape: Standard
Electrical specification: DC 3-wire
Switching value output: PNP
Switch function: normally open contact
Connection type: plug, M8, 3-pin
E3X-DA11-N
Type: e3x-da11-n Order No.: 1040837 inductive proximity sensor
Trigger sensing distance SN: 1.5 mm

ABB Field Controller PM802F Control Module AC800F PLS SPS 3BDH000002R1 CPU Base Unit
AC800F, the hybrid process control system, combines the best of both worlds, DCS and PLC. It offers PLC size and price with functionality of a DCS.
Item number:
3BDH000002R1 | PM802F | PM 802F | PM 802 F
Item description:
PM 802F
Base Unit 4 MB
battery-buffered RAM
Brand: ABB
MPN: 3BDH000002R1

Frequently Asked Questions:


1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.We offer one year warranty for New items,6 months warranty for Used items.


2. Q: Could you provide technology support?
A: We're in this field many year. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.


3. Q: Do you keep goods in stock or only trading?
A: We have large warehouse for goods and keeping lots of goods in warehouse, so we could delivery the items in short lead time.

13 Bit 10 VDC or 0 to 10 VDC Voltage, 8 Channel IC200ALG325 GE VersaMax Analog Output Module
Analog Output Modules
Analog output modules provide voltage or current signals to analog output devices . Modules require a
carrier base (IC200CHSxxx) .

1 axis, sscnet connected
Control unit: mm, inch, degree, pulse. Number of positioning data: 600 data /
axis. 40 pin connector
Easily realize high-speed and high-precision positioning control. Support
multiple types of positioning control,
Including 2-4 axis linear interpolation, 2-axis circular interpolation, speed
control, speed / position switching control, path control, constant speed
control, etc. In addition, software such as "GX configurator QP" can be used to
facilitate positioning, setting, monitoring and debugging. Q38b saves wiring
through sscnet cable connection, and the total cable distance can be up to 30m
In addition, it supports the absolute position system to determine the origin
position through the origin return data deployment operation.
There is no need to wire the near point stop, etc. Interface module telephone
line connecting peripheral equipment adapter for q2mem memory card with
standard PCMCIA interface. 10BASE-T/100BASE-TXã?? Web servo module for RS-232.
The web server module, which uses the Internet / Intranet to perform meta
process monitoring on the programmable controller, uses a PC connected to the
Internet and simply needs to be deployed,
MELSEC can be remotely monitored / operated from any location. The data
recording function can be used to display and collect data. Data can be
recorded at the shortest interval of 100ms. It also has the following
functions.
Send data / alarm notifications via email. Use FTP to transfer / obtain data
files. Display function of event monitoring / history.
User authentication /p filter and other security functions.
Users can customize the creation of web pages. 8-axis, differential driver
output type control unit: pulse.
Number of positioning data: 10 data / axis. Maximum pulse output: 4mpps. 40 pin
connector. Differential output.
Ideal solution for simple multi axis positioning. Perfect match with stepping
motor control. The acceleration and deceleration are smooth and the speed
changes slightly.
Speed up the start-up processing of positioning control. Locate the module.
Open collector output type differential driver output type
It can be divided into two types: open collector output type and differential
driver output type.
The differential driver output positioning module can reliably transmit high-
speed command pulses (up to 4mpps) to the servo amplifier, with a transmission
distance of up to 10 meters, realizing high-speed and high-precision control.
(the maximum command pulse of open collector positioning module is 200kpps.)
Reduce system downtime recovery time.

Condition:

A brand-new, unused, unopened, undamaged item in its original packaging (where

packaging is applicable). Packaging should be the same as what is found in a

retail store, unless the item is handmade or was packaged by the manufacturer

in non-retail packaging, such as an unprinted box or plastic bag. See the

seller's listing for full details.
Terms:,
We ships worldwide and accepts T/T and Paypal.

All items are subject to availability and passing our QA testing and

inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.

Rush and off-hours service available for an additional fee.
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.

Shipping:
We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.

Call to use a shipping service other than the ones listed.

International Customers are responsible for all Customs fees, VAT and other

fees applied by their respective countries.

All shipments are fully insured.

1 power module is required. Used to install q series modules. The application
range is wider and more advanced. Q Series CPU products of Yudai.
Q Series CPU products are widely used,
Provide various CPUs of programmable controller, process, redundancy, C
language, motion, manipulator and CNC to meet various control requirements.
Through multi CPU configuration, a good system meeting various control
requirements can be built according to the use scale and purpose.
In addition, through the redundant system, a high reliability system can be
built, and the system can continue to operate even in case of failure. A good
network that matches the application purpose and purpose to realize seamless
communication between layered systems. Strengthen information communication
capacity through networking.
This is also the network environment provided by Q series, a big topic in the
automation field
It is truly open & seamless. Including universal Ethernet Based
"CC linkle control" controller network for easy management environment,
And the "CC link Le field" field network that realizes high-speed and large
capacity transmission under its management. It also includes Japan's initiative
to meet the standards
And has obtained semi certified field network "CC link",
And the provincial distribution network "CC link/lt", which inherits its design
concept, and supports the sensor network "anywire"
Flexibly integrate all layers of the automation network with a full lineup.
Input points: 32 points
Input voltage and current: dc24v4ma. Response time: 1/5/10/20/70ms32 point 1
public terminal. Common anode
Output points: 32 points
Output voltage and current: dc12-24v; 0.1a/ point; 2a/ public end Mitsubishi
q65b. Response time: 1ms
32 points, 1 common end, leakage type; 40 pin connector. With thermal
protection.
Q65b with short-circuit protection and surge absorber
Reduce startup time with sample tracking
With the sampling and tracking function, it is convenient to analyze the data in case of failure,
Test program debugging time, etc., can shorten the equipment fault analysis time and start-up time.
In addition, it is also helpful to determine the data transmission and
receiving time between CPU modules in a multi CPU system Mitsubishi q65b The
collected data can be analyzed with programming tools
The data changes of bit soft components and word soft components can be easily
displayed in the form of charts and trend charts. In parallel, the sampling
tracking results can be saved in CSV in the form of gxlogviewer and displayed through the recording data display and analysis tool gxlogviewer. High speed processing, shorter production time, better performance,
As the application becomes larger and more complex, it is very necessary to shorten the system operation cycle time of Mitsubishi q65b. Through high basic operation processing speed of 1.9ns, the operation cycle can be shortened.

Contactors are divided into AC contactors (voltage AC) and DC contactors (voltage DC), which are used in power, power distribution and power consumption. Broadly speaking, contactor refers to an electrical appliance that uses the current flowing through the coil to generate a magnetic field and close the contact in order to control the load.
main features
The AC contactor uses the main contact to open and close the circuit and the auxiliary contact to turn on the control circuit.


The main contact is generally normally open contact, while the auxiliary contact often has two pairs of normally open contact and normally closed contact. Small contactors are often used as intermediate relays to cooperate with the main circuit.


The contact of AC contactor is made of silver tungsten alloy, which has good conductivity and high temperature ablation resistance.


The power of AC contactor action comes from the magnetic field generated by AC through the coil with iron core. The electromagnet core is composed of two "mountain" shaped young silicon steel sheets. One of the fixed iron core is sleeved with coil, and the working voltage can be selected. In order to stabilize the magnetic force, a short-circuit ring is added to the suction surface of the iron core. After the AC contactor loses power, it returns by spring.


The other half is a movable iron core, whose structure is the same as that of a fixed iron core, which is used to drive the closing and breaking of the main contact and auxiliary contact.

Electromagnetic contactor (contactor) refers to an electrical appliance that uses the current flowing through the coil to generate a magnetic field in industrial electricity to close the contact so as to control the load. The contactor is composed of electromagnetic system (armature, stator core, electromagnetic coil), contact system (normally open contact and normally closed contact) and arc extinguishing device.
Structural composition
Electromagnetic contactor is mainly composed of transmission device (electromagnetic mechanism), contact device (actuator) and arc extinguishing device.


1. Electromagnetic mechanism


The electromagnetic mechanism includes three parts: moving core (armature), static core and electromagnetic coil. The electromagnetic coil is connected with current to generate electromagnetic suction and drive the contact to act.


Electromagnetic mechanism is one of the important parts of electromagnetic contactor. The electromagnetic mechanism is composed of coil, iron core (static iron core), armature (moving iron core), pole shoe, iron yoke and air gap. The coil and iron core in the electromagnetic mechanism do not move in the working state; The armature is movable.


The electromagnetic mechanism converts the electromagnetic energy generated by the electromagnetic coil into mechanical energy through the action state and action process of the armature and the corresponding mechanical mechanism to drive the contact to close or open, so as to realize the control purpose of the controlled circuit.

Related Informantions:

Servo motor series: low inertia, medium / high power. Rated output: 5.0kw.

Rated speed: 3000r / min. Electromagnetic brake: none.

Shaft end specification: Standard (straight shaft).

Features: low inertia, suitable for high-speed / high acceleration and deceleration operation. IP rating: IP67. Application example:

1. Food processing machinery.

2. Printing press.

3. Injection molding machine (11kw, 15kw).

4. Large stamping machine (11kw, 15kw) hg-kr43j

The protection grade of hf-sp / hf-jp series servo motor is IP67 (except the shaft through part).

Low inertia medium power servo motor (0.5KW ~ 9kw), large speed: 6000r / min (rated speed: 3000r / min), suitable for high-frequency positioning and acceleration / deceleration operations, especially food processing machines and printing machines.

Low inertia high-power servo motor without cooling fan (11kw and 15kw), high speed: 3000r / min (rated speed: 1500r / min). Due to the design of no cooling fan, the motor structure is more compact, and the wiring is reduced by using the power connector (compared with the hf-lp series servo motor with the same power, the volume is reduced by about 46% and the weight is reduced by about 34%), which is suitable for high-frequency positioning and acceleration / deceleration operations, especially injection molding machines and large presses.

Hf-jp703 (4) / 903 (4) high speed: 5000r / min, servo motor series: flat type, medium capacity. Rated output: 5.0kw.

Rated speed; 2000r/min

Electromagnetic braking: attached. Power supply: 200V.

It is suitable for limiting the installation space in medium capacity and flat products.

To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt IP65. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible,

In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Servo motor series: medium inertia, small capacity. Rated output: 0.5KW.

Rated speed: 2000r / min. Electromagnetic braking: attached. Power supply: 400V.

Realize the stable driving of medium capacity and medium inertia products. Through the optimized structural design, the small total length in the industry is realized.

High speed & high torque. Shorten positioning time and realize high-speed equipment. Reduce power on torque ripple.

Through the combination of slot speed and torque, the smooth operation of the motor can be further reduced.

To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. Servo motor series: low inertia, medium power. Rated output: 0.5KW.

Rated speed: 2000r / min

Electromagnetic brake: with.

Shaft end specification: Standard (straight shaft).

Detail of Goods:
hg-mr73b product information and technical parameters



Name: low inertia small capacity servo motor
Model: hg-mr73b
Servo motor series: low inertia, small capacity.
Rated output: 0.75KW.
Rated speed: 3000r / min.
Electromagnetic braking: attached.
Power supply: 200V.
The rated speed is 3000r / min and the large speed is 6000r / min.
The high torque is 350% of the rated torque, realizing high torque in the field of high rotation. It only supports hg-kr series products.
Built in position encoder with high resolution.
Provide standard high-resolution position encoder (4194304p / rev (22bit)).
Realize more positioning function.
To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt IP65.
Other performance descriptions of hg-mr73b:
Type: hf-sn servo motor, medium inertia, medium power.
Rated output power: 2.0kw.
Rated speed: 2000r / min.
Electromagnetic braking: Yes.
Oil seal: Yes.
Encoder resolution: 131072p / R hg-mr73b.
S100 represents mr-e super special motor.
Kh003 is mr-e super special mark.
It is easy to operate and reduce the working load hg-mr73b
Enhanced system cost performance.
, positioning (servo motor encoder resolution: 131072).
High responsiveness.
Vibration control function through adaptive vibration.
Optimized tuning can be achieved by using personal computer and servo setting software.
There are 2 types of interfaces:
Pulse train interface is used for position control and internal speed control of hg-mr73b.
The analog input interface is used for speed control and torque control.
Widely used.

Servo motor series: low inertia, medium / high power. Rated output: 7.0kw.
Rated speed: 3000r / min. electromagnetic brake: with.
Shaft end specification: Standard (straight shaft).
Features: low inertia, suitable for high-speed, high acceleration and deceleration operation, Mitsubishi servo motor user manual. IP rating: IP67. Application example:
1. Food processing machinery.
2. Printing press.
3. Injection molding machine (11kw, 15kw) hg-kr43bj
4. Large stamping machine (11kw, 15kw)
The protection grade of hf-sp / hf-jp series motor is IP67 (except the shaft through part).
Low inertia medium power servo motor (0.5KW ~ 9kw), maximum speed: 6000r / min (rated speed: 3000r / min),
It is suitable for high-frequency positioning and acceleration / deceleration operations, especially the user manual of Mitsubishi servo motor of food processing machine and printing machine. Low inertia high-power servo motor without cooling fan (11kw and 15kw), maximum speed: 3000r / min (rated speed: 1500r / min). The design without cooling fan is adopted by the dry motor to make the motor structure more compact, and the wiring is reduced by using power connector (compared with hf-lp series servo motor with the same power, the volume is reduced by about 46% and the weight is reduced by about 34%)
It is suitable for high-frequency positioning and acceleration / deceleration operations, especially the user manual of Mitsubishi servo motor for injection molding machine and large press. Hf-jp703 (4) / 903 (4) maximum speed: 5000r / min, servo motor series: low inertia, medium and large capacity. Rated output: 1.5kw.
Rated speed: 3000r / minhg-kr43bj user manual. Electromagnetic braking: without. Power supply: 200V.
High frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67 High speed & high torque. Shorten positioning time and realize high-speed equipment. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed on-site needs as much as possible,
In the distribution of mr-14 product line, we provide rich user manual books of CO serving amplifier and co serving motor products hg-kr43bjj, which can meet the different needs of different customers. Motor series: low inertia, medium power. Rated output power: 11.0kw. Rated speed: 2000r / min. With brake or not: No.
Shaft end: Standard (straight shaft) hg-kr43bj user manual. Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia, from low speed to high speed, three modes can be selected, suitable for different application ranges. As a standard production port, 30kW or higher power is suitable for flange (type) installation and foot installation.
Application examples: injection molding machine, semiconductor manufacturing device, large conveying machinery. High resolution encoder 131072p / rev (17 bits).

Typical InputI/O Modules
(Includes Series A (Chassis) and Series A and H (Rail) I/O Modules, and FF Linking
Devices with exceptions noted below) 25 ms
High Density/Non-Isolated Analog Input Module 250 ms
RTD Module (CIOM-Series A) 50 ms
Thermocouple Module (CIOM-Series A) 50 ms
Serial Interface Module (CIOM-Series A) 250 ms
Digital Input Module used by 5 ms CEE (local only) 1 ms


C200 Control Processor Processing and Memory Resources
The C200 Control Processor provides a flexible execution environment for performing a variety of control tasks at different execution speeds. To determine how much control a Processor can perform, Processor Usage and Memory Usage must be considered. Available CPU and memory resources determine the number of modules or blocks a C200 Control Processor can execute.


Other constraints, such as total number of CMs and SCMs, must also be taken into account. These specifications should be reviewed to ensure that Experion PKS meets the application requirements. The table below represents an example of non-redundant Control processor configuration (not necessarily typical).

What is Details of Our Mitsubishi Parts?

All the Mitsubishi Parts are new and original with package.
Warranty time: 180 or 360 days.

Good Service in linture:

> We offer high quality, fast delivery, competitive price for ABB Input Output Module.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.


Liability:

linture is not liable for any personal injury or property damage resulting from the use of this equipment. It is

buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is

compliance to their machinery.

Specifications

Servomotor Type: HC-UFS152 series low inertia,large capacity,high resolution

Rated Output: 11.0kW

Rated Speed: 2000 RPM

Power supply specification: 200-230VAC 3-phase

Brake: without brake

Mitsubishi SERVO MOTOR 11.0kW (HC-UFS152)

Manufacturer: Mitsubishi

Series: MELSERVO HC

Specifications

Servomotor Type: HF-KP053 series low inertia,large capacity,high resolution

Rated Output: 11.0kW

Rated Speed: 2000 RPM

Power supply specification: 200-230VAC 3-phase

Brake: without brake

Mitsubishi SERVO MOTOR 11.0kW (HF-KP053)

Manufacturer: Mitsubishi

Series: MELSERVO HC

DANGER: Improper wiring can and will cause bodily harm as well as damage to the equipment.





When installing the system be sure to follow good wiring practices and all applicable codes. Ensure that the mounting of the various components are secure and that the environment, such as extreme dampness, poor ventilation etc. will not cause system degradation.

Question: How do I reset the drive back to factory default settings?

Answer: Go to parameter A1-03 and set value 2220 for 2 wire control or 3330 for 3 wire control (Please refer to Step 6 for wiring diagram)





Question: How do I adjust the time it takes the motor to speed up or slow down?

Answer: Adjust the acceleration time parameter C1-01 and deceleration time C1-02.





Question: How do I prevent my drive from tripping on an OV fault (overvoltage) while my motor is ramping down?

Answer: Increase deceleration time parameter C1-02.





Question: How do I prevent my drive from tripping on an OL1 fault (overload) while my motor is ramping down?

Answer: Verify motor rated current parameter E2-01 and motor overload parameter settings L1-01 Motor overload selection, L1-02 Motor overload protection time.

We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.

Rush and off-hours service available for an additional fee
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.

Are external motor disconnects required between the motor and the VFD? Service disconnects at motor loads are very often used for maintenance purposes. Normally, removing a load from a VFD while operating does not pose a problem for the VFD. On the other hand, introducing a load to a VFD by closing a motor disconnect while the VFD is operational can be fatal to the VFD.


When a motor is Started at full voltage, as would happen in this case, high currents are generated, usually about six times the full load amps of the motor current. The VFD would see these high currents as being well beyond its capabilities and would go into a protective trip or fail altogether. A simple solution for this condition is to interlock the VFD run permissive circuit with the service disconnects via an auxiliary contact at the service disconnect. When the disconnect is closed, a permissive run signal restarts the VFD at low voltage and frequency.


* Are there power factor correction capacitors being switched or existing on the intended motor loads? Switching of power factor capacitors usually generates power disturbances in the distribution system. Many VFDs can and will be affected by this. Isolation transformers or line reactors may be required for these applications.

Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping:
We ship worldwid use UPS, FedEx, DHL, or Truck Freight when needed.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.
All shipments are fully insured.

More compact than other motors with similar ratings, for a better fit in tight spaces
Completely compatible with Sigma-7 servos
Neodymium iron boron permanent magnets with a high flux density reduce rotor size
Advanced magnetic circuitry and optimum winding geometry deliver very low cogging torque
Safety rated at SIL 3 (IEC 61508)
IP67 rated for resistance to dust, water washdown
Functions in temperatures above 60oC, altitudes above 2000 ft.
Peak acceleration torque up to 300% of rated torque
Peak torque can be maintained for up to three seconds
Rated speed of 3,000 rpm, max speed of 6,000 rpm
Runs 20% cooler than previous generation products
Holding Brake and Shaft Seal option available

Terms:

We ships worldwide and accepts T/T and Paypal.

All items are subject to availability and passing our QA testing and inspection.

Turnaround Time:

Standard order processing is 1-2 business days plus shipping method chosen.

Rush and off-hours service available for an additional fee

Packaging and Handling:

Items are safely packaged in custom shipping cartons for protection.

Shipping:

We ship worldwid use UPS, FedEx, DHL, or Truck Freight when needed.

Call to use a shipping service other than the ones listed.

International Customers are responsible for all Customs fees, VAT, and other fees applied by theirrespective countries.

All shipments are fully insured.

The power supply module is a power supply that can be directly mounted on the printed circuit board. It is characterized by providing power supply for integrated circuit (ASIC), digital signal processor (DSP), microprocessor, memory, field programmable gate array (FPGA) and other digital or analog loads. Generally speaking, such modules are called point of load (POL) power supply system or point of use power supply system (pups). Due to the advantages of modular structure, modular power supply is widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields, automotive electronics, aerospace and so on.
Q61P is the power module of q series PLC. The power module is a module that provides DC5V power to each module of the programmable controller installed on the base plate.
Qy61p parameters:


Q61p-a1 input voltage range: AC100 ~ 240V output voltage: DC5V output current: 6A

q series DC power supply 32 point source output module qy81p product specification:
transistor source output module
output
Optocoupler
12-24vdc 20 15%
0.1a/point, 2A /common terminal
maximum starting current]0.7A, 10ms or less
leakage current at off 0.1mA or less
0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A
off on response time 1ms or less
on off response time] 1ms or less (rated load, resistive load)
Zener diode
protection function] activate the overheating protection function in 2-point increments and the overcurrent short-circuit protection function in 1-point increments

DC reactor can increase the power factor to more than 0.9. Because of its small size, many frequency converters have installed DC reactors directly in the frequency converter. In addition to improving the power factor, the DC reactor can also weaken the impact at the moment when the power supply is just connected. If AC reactor and DC reactor are equipped at the same time, the power factor of variable frequency speed regulation system can be increased to more than 0.95.
Structural design
The DC smoothing reactor is used for the filter circuit at the output side of the rectifier circuit. Because there is a DC current component, the magnetic flux of the iron core works in the first quadrant, resulting in magnetic bias. In order to increase the inductance and prevent magnetic flux saturation, DC smoothing reactors adopt cut iron core and add air gap to lengthen their hysteresis loop laterally, which is a bit like the case of single ended flyback transformer in principle. In this way, when there is a current of the same size, B is small and not easy to be saturated.

Detail Information
Product classification: Mitsubishi frequency converter accessories

Product name : Linear noise filter

Model and Specificatipn : FR-BSF01


Used to reduce line noise

Applicable frequency converter FR-A700 , FR-F700 , FR-E700 , FR-D700 , FR-BSF01

Servo motors are widely used in ATM machines, inkjet machines, lettering machines, photo machines, spraying equipment, medical instruments and equipment, computer peripherals, mass storage equipment, precision instruments, industrial control systems, office automation, robots and other fields. In addition, it is widely used in textile machinery and equipment such as computer embroidery machine

Specification of FL net interface moudel qj71fl71-t-f01:
1. Transmission instructions
[data transfer speed]
100base-tx: 100Mbps (full duplex / half duplex)
10Base-T: 10Mbps (half duplex)
[transmission mode] baseband
[electronic interface] IEEE802 3 standard (CSMA / CD standard)
[Transport Protocol] UDP / IP FA link protocol
[maximum section length] 100m
[maximum number of stations in the system] 254
[maximum number of sites] 254 modules / all internal address blocks
[minimum station spacing] 2.5m
[cyclic data amount] maximum (8K bits + 8K words) / system, maximum (8K bits + 8K words) / station
[information data capacity] 1024 bytes maximum
2. Link data description
[public storage area] area 1 (bit area) 8K / bit area 2 (word area) 8K words
[virtual address space and physical memory] none
[error record storage area] 512 words
[status storage area] bit area 2K / bit word area 2K
[local station network parameter setting area] 96 words
[network parameter setting area of other stations] 2048 words
[network parameter acquisition area] 512 words
[soft component storage area] 512 words
[information area (instantaneous area)] 1024 bytes * 2 at most (transmit receive each)
3. Transmission instructions
[information transmission] 500ms or less (1:1 one-way information arrival time)

Good Service in linture:

> We offer high quality, fast delivery, competitive price for ABB Input Output Module.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.

Nidec Sankyo Industrial Servo Motor's Use Applications


Embroidery Machine,Textile Machine,Packaging Machine etc
Removal Robot
Conveyer Machine
Processing Machine

Features

Suitable for applications with high speed rotations.Can be used for most applications.
Suitable for applications with low mechanical rigidity such as drive belt machinery.