Angle free protractor tool can measure the angle of the inside or outside corner and transfer the angle physically onto your mister saw. The angle set on your saw will be perfectly accurate because it was directly transferred from the tool.
Angle free protractor is not only helpful for measuring angles and setting mitre saws accordingly but also good for making pictures frames or decks in geometric shapes.
SH 100 is a thixotropic, fiber-reinforced, structural cement mortar for protecting and repairing concrete structures. Its physical and mechanical properties allow to correct large irregularities in the substrate with a rapid intervention. The product can be used for repairing reinforced concrete structures such as front panels of balconies, beams, columns, stringcourses, moulding, cornices and fair faced concrete surfaces.
It is easily applied using a continuous plastering machine and is suitable for large surfaces such as drainage channels, dams, bridges, water pipes, tanks, containment structures made of reinforced concrete.
SH 200 is a ready-mixed, non-shrink, non-metallic, flow-able, high-strength structural grout.
SH 200 contains a balanced blend of washed and graded silica sands, Portland cement, flow improving compounds, and a shrinkage compensating system which produces a volume stable structural grout.
SH 200 produces high early and ultimate strengths without intermediate or latent shrinkage.
SH 200 remains stable without failure from compressive loading, impact, lateral thrusts, high heat or continuous vibration. It is scientifically proportioned and is ready for use at varied consistencies from plastic to fluid.
SH 300 will form a high-strength abrasion and chemical resistant, self-leveling mortar. Because it is based on Portland cement and latex polymers, and does not depend on gypsum, it may be used indoors or outdoors. SH 300 flows out to produce a smooth resurfacing or leveling compound for structurally sound existing slabs.
SH 400 is a high-performance, fast-setting, multipurpose repair material. Durable in wet environments, SH 400 is a blend of Fast-Setting hydraulic cement and quality aggregates. SH 400 is non-metallic, and no chlorides are added.
SH 400 with water to produce a workable, high quality mortar material that is ideal where fast strength gain, high durability and low shrinkage are desired.
SH 400 sets in 15 minutes and achieves structural strength in 1 hour.
SH 500 is a high-performance, polymer modified, cement coating. Durable in multiple environments, SH 500 is a blend of Rapid Set hydraulic cement, high performance additives and quality aggregates.
SH 500 has a working time of 30 minutes, can be exposed to hydrostatic pressure in 3-5 days, and cures to a concrete gray color.
Easier to use tool
Safer to use (no spark) tool
Blade design efficient for straight, curve, and round cutting
Patent No. 10-0917125
Design Registration No. 30-0491747
When cutting a CD double-pipe (conduit), this tool can be cut only for external conduit without damaging the internal wires and the sheath.
Nylon 6 chip is obtainable by hydrolytic polymerization of caprolactam in the presence of dicarboxylic acids as chain regulators, subsequent processing of the polymer melt into the chip, extraction of the low molecular weight portions from the chip with water, and subsequent drying of the chip.
Nylon 66 is made of hexamethylenediamine and adipic acid are combined with water in a reactor which gives nylon salt after the polymerization process nylon 66 is produced. They are used for manufacturing textile grade yarns as well as industrial products. Available luster is Bright & Semi Dull.
Nylon 6 chip is obtainable by hydrolytic polymerization of caprolactam in the presence of dicarboxylic acids as chain regulators, subsequent processing of the polymer melt into the chip, extraction of the low molecular weight portions from the chip with water, and subsequent drying of the chip.
Nylon 66 is made of hexamethylenediamine and adipic acid are combined with water in a reactor which gives nylon salt after the polymerization process nylon 66 is produced. They are used for manufacturing textile grade yarns as well as industrial products. Available luster is Bright & Semi Dull.
Nylon 6 chip is obtainable by hydrolytic polymerization of caprolactam in the presence of dicarboxylic acids as chain regulators, subsequent processing of the polymer melt into the chip, extraction of the low molecular weight portions from the chip with water, and subsequent drying of the chip.
Nylon 66 is made of hexamethylenediamine and adipic acid are combined with water in a reactor which gives nylon salt after the polymerization process nylon 66 is produced. They are used for manufacturing textile grade yarns as well as industrial products. Available luster is Bright & Semi Dull.
Nylon 6 chip is obtainable by hydrolytic polymerization of caprolactam in the presence of dicarboxylic acids as chain regulators, subsequent processing of the polymer melt into the chip, extraction of the low molecular weight portions from the chip with water, and subsequent drying of the chip.
Nylon 66 is made of hexamethylenediamine and adipic acid are combined with water in a reactor which gives nylon salt after the polymerization process nylon 66 is produced. They are used for manufacturing textile grade yarns as well as industrial products. Available luster is Bright & Semi Dull.
Cation Dyeable Chip, Deep Dyable Chip, Pale Dyable Chip
Nylon 6 chip is obtainable by hydrolytic polymerization of caprolactam in the presence of dicarboxylic acids as chain regulators, subsequent processing of the polymer melt into the chip, extraction of the low molecular weight portions from the chip with water, and subsequent drying of the chip.
Nylon 66 is made of hexamethylenediamine and adipic acid are combined with water in a reactor which gives nylon salt after the polymerization process nylon 66 is produced. They are used for manufacturing textile grade yarns as well as industrial products. Available luster is Bright & Semi Dull.
NR is widely used because it is an alternative material to synthetics. In most of its useful forms, it has a large stretch ratio, high resilience, and is extremely waterproof. Anti vibration rubber used for automiles and rubber mats are the major applications.
Application: Dustproof vehicle components, Belts, Spring Pad, Bush
This is a product which uses SBR/BR, a widely-used rubber for general purposes, as the base polymer. Most of the products are blended with natural rubber, and supply of single products is available depending on the use. Products suitable to various industrial materials, belts, hoses, shoes, and tires are supplied.
Application: Dustproof vehicle components, Belts, Spring Pad, Bush
This is a rubber adding Chlorine instead of methyl to the structural formula of natural rubber, which has the same elasticity as NR, relatively superb heat-resistance, oil-resistance, and weather-resistance compared to NR and SBR, which are the general-purpose rubbers, and similar ozone-resistance as NBR. The use for this rubber is for CVJ-boots, dust covers, and hoses.
Application: Wire Cover, Conveyor Belt, Mounting Rubber, Tank or CAn Lining, Anti-corrosive Packing, Anti-corrosive Roll, Dust Cover
EPEM is used as the base polymer. The main properties of EPDM are its outstanding heat, ozone, and weather resistance. so that the most common use is in vehicles as used in door seals, window seals, trunk seals.
Application: Weather Strips, Radiator Hoses, Heater Hoses, Protectors(Solid, Sponge), Brake System, Grommet
NBR is a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene. Although its physical and chemical properties vary depending on the polymer's composition of nitrile, this form of synthetic rubber is unusual in being generally resistant to oil, fuel, and other chemicals. It is used in the automotive industry to make fuel and oil handling hoses, seals and grommets.
Application : Air Intake Hose, Safety shoes, High-pressure Hose, Packing, Roller, Belt, O-ring