This is a rubber adding Chlorine instead of methyl to the structural formula of natural rubber, which has the same elasticity as NR, relatively superb heat-resistance, oil-resistance, and weather-resistance compared to NR and SBR, which are the general-purpose rubbers, and similar ozone-resistance as NBR. The use for this rubber is for CVJ-boots, dust covers, and hoses.
Application: Wire Cover, Conveyor Belt, Mounting Rubber, Tank or CAn Lining, Anti-corrosive Packing, Anti-corrosive Roll, Dust Cover
Have good resistance of combustion £¬weather aging£¬ heat and good self-complementary property. 1-50mm*0.6-2m*1-20m
Neoprene-polychloroprene (CR) all purpose elastomer and an extremely versatile synthetic neoprene rubber. Application for vibration dampening as well as industrial gaskets, washers, Feature: Antiflaming, good resistance to ozone and varying weather conditions. Holds up well when in contact with oils and chemicals. 1-3 Plies cloth could be inserted. Both side smooth or cloth wove Available in many grades: Commercial Grade for general purpose, High Grade for special purpose, etc.
CPE/CR Rubber Vulcanizer H631 Colour: Light yellow powder Cross-linking Agent ACTORH-631 H631 can be used as a thiadiazole vulcanization system for vulcanization crosslinking of chlorinated polyethylene rubber (CPE/CM) and chloroprene rubber (CR). As a CM/CR high-efficiency vulcanizing agent, it can produce heat-resistant, ozone-ageing, flame-retardant and excellent physical properties. It is widely used in rubber products such as cables, hoses, tapes and so on. H631 is obtained by complex condensation coupling reaction of thiadiazole derivatives and other macromolecule amides. Its appearance is a pale yellow powder. The product can be used in various vulcanization processes of CPE/CR, such as moulding, continuous vulcanization, pot-type, microwave-type, etc. H631 can effectively vulcanize chlorinated polyethylene rubber (CM), chloroprene rubber (CR) and obtain excellent vulcanizates. Characteristic 1. H631 is suitable for low pressure die-less vulcanization (conventional peroxide system requires higher vulcanization temperature and pressure), with good processing safety and longer scorching time. 2. H631 can replace high-priced plasticizers such as DOP with cheap plasticizers such as aromatic oils. 3. H631 is an effective co-vulcanizing crosslinking agent for rubber such as CPE/EPDM CPE/NR CPE/CR.
Adhesive and Moulding grades available in High and Medium Viscosity.
according to your usage and requirements by rubber sheet , to customized production.
Product Description Size:1mm to 50mm Width:2000mm (max) Length:any length Color:black,red,grey,green,blue,tan etc. Fabric insertion available for request. Product Feature Performance:With moderate hardness, good abrasion resistance and elasticity, working under the higher pressure status at the temperature of -35 degree to 60 degree in the air. Technical data: gravity:1.05~1.8; Tensile strength:not less than 2.0Mpa; Elongation:not less than 200%; Hardness:40~85 shore A Application / Models Usage:Apply to the pavement of disposable ground carriage and work table, electronic and thermal aging sites, which can be used as oil proof materials, etc.
SBR,CR,NBR,NR,EPDM rubber sheet , rubber sheet with insertion, rubber sheet cloth both side , rubber sheet cloth both side with insertion, etc. Specification: Length: 1-50m Width: 500-2200mm Thickness: 0.5mm-80mm Technical parameter: Density: 1.1-1.8g/cm3 Tensile: 2.0-9.0Mpa Elongation: 100-500% Hardness: 55 -85 Shore A Usage: Punching washer, gasket ring make gasket board, seal of the door window. Apply to the pavement of disposable ground carriage and work table, electronic and thermal aging sites, which can be used as oil proof materials, etc. Material: Reclaimed rubber, SBR, CR, NBR, NR, EPDM Color: Black, red, white, blue, green, etc. Package: Woven bag or according customerí»s need. Packing in PP bag ,woven bag
Specifically formulated for special applications where more than just resistance to abrasion is required.
Specifically formulated for special applications where more than just resistance to abrasion is required.
