Parsros Material Testing Equipment

Automatic Cement Compression & Flexure Testing Machines

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly :165 mm and Lower Loading Platen,:165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.)

Choosing the compression or flexure frame by using the changeover valve.
Pressing the START button on the control unit.

The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.

Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system

Product Code Product Description

PRS-CM0075 Manuel Mortar Mixer, 220-240 V 50-60 Hz

PRS-CM0075/110 Manuel Mortar Mixer, 110 V 60 Hz

PRS-CM0076 Spare Bowl for PRS-CM0075 and PRS-CM0085, 5 L

PRS-CM0078 Spare Beater for PRS-CM0075 and PRS-CM0085

STANDARDS : EN 196-1, 196-3, 413-2, 459-2, 480-1, 1015-2, 12617-4; ASTM C187, C305, AASHTO T129, T131, T162

The PRS-CM0075 Manual Mortar Mixer has a 5 liter (approx.) capacity, it has been designed to mix mortars and cement pastes primarily to the requirements of standards.

The mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. The user can choose the speeds easily by using the switch fitted to the machine.

There is a sand filling apparatus on the mixer to pour sand easily. The bowl and beater are easily fitted and removed from mixer.

The Manual Mortar Mixer is supplied complete with;
Bowl, 5 L (approx.)
Beater

Dimensions 300x555x610 mm

Weight (approx.) 54 kg

Power 200 W

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly 165 mm and Lower Loading Platen, 165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â??) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve.
Pressing the START button on the control unit.
The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, an automatic hydraulic power pack with data acquisition and control system

Product Code Product Description

PRS-B0950 Large Metal Curing Tank

PRS-B0952 Set of Removable Upper Racks for PRS-B0950

PRS-B0954/N Curing Tank Heater for PRS-B0950 and PRS-B0965, 220-240 V 50-60 Hz (3 cm connecting channel and 50 cm resistance length)

PRS-B0955 Circulating Pump, 220-240 V 50-60 Hz

PRS-B0960 Large Plastic Curing Tank

PRS-B0962 Wide Plastic Curing Tank

PRS-B0956 Curing Tank Heater for PRS-B0960 and PRS-B0962 , 220-240 V 50-60 Hz (6,5 cm connecting channel and 70 cm resistance length)

(If 110V required please indicate on your order)

The PRS-B0950 steel, PRS-B0960 and PRS-B0962 Plastic Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted and can be kept constant by an electric resistance incorporating a digital thermo regulator which maintains the set temperature between ambient to 40 ºC with ± 2 ºC accuracy.

The PRS-B0950 is manufactured from powder coated sheet steel. Suitable upper racks to hold concrete cubes are available on request (max. 8 pieces). PRS-B0960 and PRS-B0962 tanks have a bearer metal carcass.

The PRS-B0952 should be ordered separately.

All Curing Tanks are supplied complete with;

â?¢ Heater

â?¢ Submersible Circulation Pump

â?¢ Base Metal Racks

PRS-B0980 Accelerated Curing Tank, Ambient to +60°C, 380 V 50 Hz

PRS-B0980 Accelerated Curing Tank is designed for curing concrete specimens according to ASTM C1768 (Procedure A - Warm Water Method) and BS 1881:Part 112 (35°C Method and 55°C Method).

The Tank consists of an insulated rectangular double walled metal chamber inside lined with stainless steel outer powder coated, an insulated lid with lifting handle to cover the chamber and an stainless steel perforated platform for circulation of water and to support the concrete specimes The tank also has a circulation pomp. to provide the same water temperature at any point within the tank.

The tank works ambient to +60°C temperature. The temperature is controlled with closed loop PID controlled digital thermoregulator with accuracy of ±2°C. Curing temperature and curing time can also be set.

Product Code Product Description

PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz

PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz


The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC.

Dimensions 350x320x290 mm
Weight (approx.) 9 kg
Power 600 W

Product Code Product Description

PRS-B0510 Concrete Flow Table Test Set

PRS-B0512 Flow Cone for PRS-B0510

PRS-B0513 Wooden Tamper 40x40x335 mm

The test set is used for concrete mixes of high workability and determines flow index as an arithmetic mean of the diameter of the specimen after working on a flow table.

The apparatus consists of a double steel table, an upper table measuring 700x700 mm and hinged at one side to the lower table.

The top table is inscribed and all parts are protected against corrosion. The stainless steel cone has a 130 ±2 mm top diameter, 200 ±2 mm base diameter and 200 ±2 mm height and 1.5 mm thickness.

Dimensions 700x850x300 mm

Weight (approx.) 40 kg

The Concrete Flow Table is supplied complete with;
â?¢ Flow Cone
â?¢ Wooden Tamper

Product Code Product Description

PRS-ZE0865 In-situ CBR Test Apparatus

PRS-ZE0866 Cutting Collar (edge) for PRS-ZE0865

PRS-ZE0867 Conversion Frame

STANDARDS :

The PRS-ZE0865 -situ CBR Test Apparatus, 50 kN capacity,is used for the on-site determination of the bearing capacity of soils used in road construction.

The set consists of:
â?¢ 50 kN capacity mechanical jack with ball seating
â?¢ 50 kN capacity load ring
â?¢ Analog penetration dial gauge (30 mm travel x 0.01 mm)
â?¢ Adjustable dial gauge holder
â?¢ CBR Penetration piston
â?¢ Set of extension rods (2 pcs. 102 mm, 1 pcs. 305 mm and 1 pcs. 610 mm length)
â?¢ Datum bar assembly with two stands
â?¢ 4.5 kg annular surcharge weight
â?¢ 4.5 Kg slotted surcharge weight
â?¢ 9 kg slotted surcharge weight
â?¢ Vehicle bracket and wooden carrying case

The PRS-ZE0867 Conversion Frame is used to convert the IN-situ CBR test to a mechanical laboratory CBR test machine.

The system is easily assembled onto the conversion frame with the addition of some of the accessories included in PRS-ZE0865. The frame is used with the jack, load ring, CBR mould and penetration piston.

Product Code Product Description
PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz

PRS-ZE0180/110 Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz

PRS-ZE0182 Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel

PRS-ZE0183 Cone Test Gauge for PRS-ZE0182

PRS-ZE0184 Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel

PRS-ZE0185 Cone Test Gauge for PRS-ZE0184

PRSGH-1425 Moisture Content Tin with Lid Ã?:55 mm x h:35 mm, Aluminum

PRSGH-1435 Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum

A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength.
The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit.

The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test.

Semi-Automatic Penetrometer for Liquid Limit supplied complete with;
â?¢ Automatic Penetration Timer Unit,
� 30° Penetration Cone
â?¢ Sample Cups, 3 pcs. Aluminium, Ã?55 mm x h:35 mm.

Product Code Product Description

PRS-ZE0665 Spring Type Proctor Penetrometer

PRS-ZE0666 Needle Set for Proctor Penetrometer

(28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23 and 4.52 mm diameters)

The PRS-ZE0665 Spring Type Proctor Penetrometer is used for establishing the moisture-penetration resistance relation of finegrained soils. The apparatus consists of a spring loading device which is graduated from 10 to150 lbf in 2 lbf subdivisions.

Needle Set for Proctor Penetrometer consist of interchangeable needle points of 28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23, 4.52 mm diameters and a carrying case.

Dimensions 540x260x60 mm (packed)
Weight (approx.) 5 kg

Product Code Product Description

PRS-ZE0790 Swell Plate for CBR Swelling Test

PRS-ZE0792 Tripod for CBR Swelling Test

PRSGM-0120 Analog Gauge 30 mm travel x 0.01 mm division

PRSGM-0148 Digital Dial Gauge 25x0,01 mm, LCD Display Data Output

PRGM-0152 Digital Dial Gauge 12,7x0,001 mm, LCD Display Data Output

PRS-ZE0794 CBR Soaking Tank (6 pcs. CBR Mould Capacity )

STANDARDS :

This equipment is used to monitor the swelling by placing it on top of the soil sample. The swell test consists of perforated plate (swell plate) with adjustable stem, dial gauge and dial gauge tripod for mounting swell dial gauge in position on CBR Mould Collar.

The prefered gauge and each other equipment should be ordered separately for swelling test.

Aggregate Impact Value (AIV) Testing Apparatus

Product Code Product Description

PRS-A0650 Aggregate Impact Value (AIV) Testing Apparatus

The Aggregate Impact Value Testing Apparatus, meets with BS 812, it is robustly designed to determine the Aggregate Impact Value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact.

The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion.

The Aggregate Impact Value (AIV) Apparatus is supplied complete with;
â?¢ Cylindrical Measure, Ã? 75 mm,
â?¢ Steel Tamping Rod, Ã? 16x600 mm

Dimensions 450x350x850 mm

Weight (approx.) 52 kg

Aggregate Crushing Value (ACV) Sets

Product Code Product Description

PRS-A0630 Aggregate Crushing Value (ACV) Set Ã? 150 mm BS

PRS-A0631 Aggregate Crushing Value Cylinder Ã? 150 mm for PRS-A0630

PRS-A0632 Aggregate Crushing Value Base Plate for PRS-A0630

PRS-A0633 Aggregate Crushing Value Plunger for PRS-A0630

PRS-A0634 Aggregate Crushing Value Cylindrical Measure for PRS-A0630

PRS- A0408 Tamping Rod Ã? 16x600 mm

PRS-A0640 Aggregate Crushing Value (ACV) Set Ã? 75 mm BS

PRS-A0641 Aggregate Crushing Value Cylinder Ã? 75 mm for PRS-A0640

PRS-A0642 Aggregate Crushing Value Base Plate for PRS-A0640

PRS-A0643 Aggregate Crushing Value Plunger for PRS-A0640

PRS-A0644 Aggregate Crushing Value Cylindrical Measure for PRS-A0640

PRS-A0645 Tamping Rod Ã? 8x300 mm

The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod. All parts of the apparatus are powder coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable. For aggregates smaller than 10 mm, a 75 mm diameter cylinder and associated equipment is available.

PRS-A0630 and PRS-A0640 Test Sets are also used for the Ten Percent Fines Value (TFV) of aggregates according to BS 812:111.

The Aggregate Crushing Value (ACV) Set is supplied complete with;
â?¢ Cylinder,
â?¢ Base Plate,
â?¢ Plunger,
â?¢ Cylindrical Measure
â?¢ Tamping Rod


Product Code PRS-A0630 PRS-A0640

Dimensions 250x250x600 mm 120x120x350 mm

Weight (approx.) 29 kg 6 kg

Product Code Product Description

PRS-A0500/E Sand Equivalent Test Set, EN Model

PRS-A0500/A Sand Equivalent Test Set, ASTM Model

PRS-A0502/E Sand Equivalent Measuring Two Graduated Cylinder, EN

PRS-A0502/A Sand Equivalent Measuring Graduated Cylinder, ASTM

PRSGH-1425 Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ã?:55 mm x h:35 mm

PRS-A0506 Sand Equivalent Siphon Assembly

PRS-A0507/E Sand Equivalent Test Plunger Assembly,EN

PRS-A0507/A Sand Equivalent Weighted Foot Assembly,ASTM

PRS-A0515 Washing and Flocculating Solution (Stock Solution), 1 lt

The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler.

PRS-A0515 Washing and Flocculating (Stock Solution) should be ordered seperately.

The Sand Equivalent Test Set is supplied complete with;

â?¢ Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units for PRS-A0500/A,

â?¢ Transparent Acrylic Plastic Measuring Cylinder - 4 units for PRS-A0500/E,

â?¢ Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube,

â?¢ Plastic can - 5 lt.

â?¢ Weighted Foot Assembly,

â?¢ Measuring Tin,

â?¢ Wide-Mouth Funnel,

â?¢ Ruler,

â?¢ Special Carrying Case,

Dimensions 400x550x150 mm

Weight (approx.) 4,6 kg

Product Code Product Description
PRS-A130 Riffle Box 7 mm
PRS-A131 Riffle Box 13 mm
PRS-A132 Riffle Box 15 mm
PRS-A133 Riffle Box 19 mm
PRS-A134 Riffle Box 25 mm
PRS-A135 Riffle Box 30 mm
PRS-A136 Riffle Box 38 mm
PRS-A137 Riffle Box 45 mm
PRS-A138 Riffle Box 50 mm
PRS-A139 Riffle Box 64 mm
PRS-A140 Riffle Box 75 mm


STANDARDS :
Riffle boxes are used for dividing aggregates into 2 equal homogenous quantity for testing. The Riffle Box is electrostatically painted and manufactured to meet the relevant International standard both in the slot width and number of slots.

The Riffle Boxes are supplied complete with;
â?¢ Containers with Handles - 3 pcs









Product Code Aperture Number of Slots Weight Dimensions
PRS-A130 7 mm 12 2 kg 130x180x180 mm
PRS-A131 13 mm 12 6 kg 200x250x350 mm
PRS-A132 15 mm 12 6.5 kg 200x290x350 mm
PRS-A133 19 mm 10 11 kg 220x310x400 mm
PRS-A134 25 mm 10 9 kg 250x350x420 mm
PRS-A135 30 mm 10 15 kg 230x420x450 mm
PRS-A136 38 mm 8 16 kg 320x430x570 mm
PRS-A137 45 mm 8 20 kg 320x450x590 mm
PRS-A138 50 mm 8 20 kg 320x500x600 mm
PRS-A139 64 mm 8 32 kg 360x600x600 mm
PRS-A140 75 mm 8 35 kg 370x700x600 mm

Product Code Product Description

PRS-A300 Flakiness Index Sieve Set BS

PRS-A301 Flakiness Index Sieve BS 4.9x30 mm slot size

PRS-A302 Flakiness Index Sieve BS 7.2x40 mm slot size

PRS-A303 Flakiness Index Sieve BS 10.2x50 mm slot size

PRS-A304 Flakiness Index Sieve BS 14.4x60 mm slot size

PRS-A305 Flakiness Index Sieve BS 19.7x80 mm slot size

PRS-A306 Flakiness Index Sieve BS 26.3x90 mm slot size

PRS-A307 Flakiness Index Sieve BS 33.9x100 mm slot size

Aggregate particles are considered as flaky when their thickness is less than 0.6 of their mean sieve size. Aggregate to be classified is separated into seven sieve fractions from 6.3 to 63 mm and each fraction is examined separately.

The dimensions of each sieve comply with the relevant International Standard, manufactured from heavy gauge steel sheet and coated with electrostatic paint. The accuracy of the slot size is better than 0.1 mm.

PRS-A300 Flakiness Index Sieve Set consists of 7 sieves.

For sample preperation 6.3, 10, 14, 20, 28, 37.5, 50 and 63 mm aperture sizes test sieves should be ordered seperately.

Product Code Slot Size (wxl) Weight (approx.) Dimensions
PRS-A300 4.9x30 mm 1.5 kg 300x220x80 mm
PRS-A301 7.2x40 mm 1.6 kg 320x240x80 mm
PRS-A302 10.2x50 mm 1.9 kg 300x220x80 mm
PRS-A303 14.4x60 mm 2.0 kg 360x260x80 mm
PRS-A304 mm 2.2 kg 390x280x80 mm
PRS-A305 26.3x90 mm 2.6 kg 420x300x80 mm
PRS-A306 33.9x100 mm 2.9 kg 470x320x80 mm

PRSCM-0037 Digital Length Comparator

PRSCM-0038 Length Comparator with Length Measuring Sensor 220-240 V 50-60 Hz


Length Comparators are used to determine the length changes on different type of cement prisms.

The set consists of a length measuring frame with measuring apparatus attached to it. There are 2 models available; PRSCM-0037 is with 0.001 mm x 12,7 mm digital dial gauge and PRSCM-0038 is with special 0.0001 mm x 30 mm transducer and readout unit.
Reference rod and moulds should be ordered separately according to the test to be performed.

Dimensions

PRSCM-0037 180x180x450 mm

PRSCM-0038 250x250x650 mm

Weight (approx.)

PRSCM-0037 6 kg

PRSCM-0038 8 kg

Product Code Product Description

PRS-A0445 Shape Index Caliper


Shape Index Caliper is used for the determination of the shape factor of aggregates. Measurement range is 200 mm and graduated with 0.05 mm increments.

Dimensions 450x150x50 mm
Weight (approx.) 0,4 kg

Product Code Product Description

PRS-A0440 Efflux Index Apparatus (Flow Coefficient of Fine Aggregates), EN


PRS-A0440 Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus is used to obtain information about the shape and the angularity of grains of fine aggregates.

The flow coefficient of an aggregate is the time, expressed in seconds, for a specified volume of aggregate to flow through a given opening, under specified conditions using a standard apparatus.

Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus consist of two funnels with different opening, cylindrical hopper, metal stand with a shutter and metal container.

Dimensions 150x180x410 mm

Weight (approx.) 5 kg

Product Code Product Description

PRS-A0445 Length Gauge (Elongation Index BS)


Length Gauge (Elongation Index BS), is used for determining the elongation index of aggregates. The particle is elongated when its length (longest dimension) is more than 1.8 o the midsize of the sieve fraction.

The aggregate to be classified is separated into six sieve fractions from 6.3 to 50 mm and each fraction is examined separately.

Dimensions 370x70x70 mm

Weight (approx.) 0,82 kg

Product Code Product Description

PRS-A0885 Reference Colours Glass

PRSGG-1705 Graduated Impurities Test, Glass Bottle 500 ml, ASTM

PRSGG-1710 Graduated Impurities Test, Glass Bottle 1000 ml, ASTM

PRSGG-1720 Cylindrical Glass Bottle with Cork Stopper, for Organic Impurities, 450 ml,EN

PRSGC-0840 Sodium Hydroxide 1 kg


The Reference Colour Glass consists of 5 organic glass scales mounted in a plastic holder, which is used for the comparison of the colour results from the relevant test.

The 500 ml and 1000 ml capacity Graduated Glass Bottles are used for making reference standard colour and test solution according to the ASTM standard.

PRSGG-1720 450 ml Cylindrical Glass Bottle is used for determination of organic impurities as required in the EN standard.

Product Code Product Description

PRSGE-AS0080 Marshall-CBR-Proctor Specimen Extruder, 30 kN Capacity

STANDARDS : EN 12697-30, 13286-2, 13286-47 AASTHO T245, T134, T180,T193; ASTM D1559, D698, D1557, D1883; BS 598-107, 1377-4, 1924-2

The specimen extruder is designed to easily extrude specimens from Marshall, CBR, standart and modify Proctor Moulds.

The capacity of the extruder is 30 kN. Supplied complete with a manual hydraulic jack and 2 pcs. adaptor to extrude specimens from 100mm (4 â??), 150 mm (6â?�) inner diameter marshall, CBR standard and modified proctor, moulds.

Technical Specifications

Ram Travel 130 mm

Screw Travel 90 mm

Dimensions 280x280x520 mm

Weight (approx.) 28 kg

Product Code Product Description

PRS-AS0061/E Marshall Compaction Mould for Impact Compactor with Wooden Pedestal, EN, 101.6 mm

PRS-AS0061/A Marshall Compaction Mould ASTM 4â?�

PRS-AS0062 Marshall Compaction Mould ASTM 6â?�

PRS-AS0064 Marshall Storage Plate for 6 pcs. for 4â?� (101.6mm) specimens

STANDARDS : EN 12697-30; ASTM D1559, D6926, D5581; AASHTO T245

The Marshall Compaction Moulds are used to produce the Marshall specimens with automatic or manual compactors. The moulds are manufactured using galvanized steel.

The Compaction Moulds consist of a base plate, mould body and a collar. The Marshall Storage Plate is designed to store
6 pcs , 4â?� diameter Marshall specimens.

Product Code Dimensions Weight (approx.)
PRS-AS0061/E-A Ã?120x170 mm 3,5 kg
PRS-AS0062 Ã?175x210 mm 6 kg
PRS-AS0064 250x500x70 mm 6 kg

Product Code Product Description

PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz

PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058

PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.
The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

Marshall Stability Test Machine with Digital Readout

Product Code Product Description

PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz

PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058
PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.

The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement)

The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine.

Platen Speed 50,8 mm/min
Capacity 50 kN

The PRS-AS0055 Marshall Stability Test Machine is supplied complete with;
â?¢ Load Cell, 50 kN
â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm
â?¢ Hand Wheel for Manual Control
â?¢ Breaking Head, 4â?�

Dimensions 550x700x1200 mm
Weight (approx.) 102 kg
Power 1100 W

Product Code Product Description

PRS-AS0140/A Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), ASTM 220-240 V 50-60 Hz

PRS-AS0140/E Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), EN 220-240 V 50-60 Hz

PRS-AS0142 Spare Glass Container for PRS-AS0140

PRSGE-AS3572 Air-Drying Unit for PRS-AS0140

STANDARDS : EN 12607-1; ASTM D2872; AASHTO T240

PRS-AS0140 Bitumen Oven is used for determination of the resistance to hardening of semisolid asphaltic materials/ bitumen or bituminous binders under the combined effects of heat and air with the rolling thin-film oven test (RTFOT) method.

The Internal chamber of PRS-AS0140 Bitumen Oven is manufactured from stainless steel, insulated with fiberglass or similar, the door has a symmetrically located window.
The oven has a programmable temperature controller which works in PID mode and digital display system. A temperature sensor is used instead of the ASTM 13C thermometer. The temperature can be read from the digital unit placed on the oven. Over tempereture controlled by a mechanic switch. Conforming to the CE Directives.

Air Compressor and Air-Drying Unit (PRSGE-AS3572) should be ordered separately. Maximum pressure should not exceed 2 bar when an air compressor is used.

The Bitumen Oven for RTFOT is supplied complete with;

â?¢ Glass Comtainers, 8 pcs.

Dimensions 800x700x750 mm

Weight (approx.) 62 kg

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Product Code Product Description

PRS-AS0137 Fraass Breaking Point Apparatus

PRS-AS0138 Stainless Steel Plaque for PRS-AS0137 Frass Apparatus (pack of 10)
PRS-AS0139 Dry Ice Maker

STANDARDS : EN 12593

The PRS-AS0137 Breaking Point Apparatus is used to determine the breaking point of solid and semisolid bitumen.
The Fraass Breaking Point is the temperature at which bitumen first becomes brittle, as indicated by the appearance of cracks when a thinfilm of the bitumen on a metal plaque is cooled and flexed in accordance with specified conditions.

The apparatus consists of stainless steel plaque, cooling and bending apparatus, thermometer IP 42C (-38°C/+30°C), plate and stand.

Dimensions PRS-AS0137 100x100x300 mm
PRS-AS0139 400x600x650 mm
Weight (approx.) PRS-AS0137 3 kg
PRS-AS0139 20 kg

Product Code Product Description

PRS-ASKW00126 Kinematic Viscosity Apparatus

STANDARDS : ASTM 2170,AASHTO T201,EN 12595
The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats.
Capacity: Five viscometers to be ordered separately according to viscosity.

Dimensions 300 x 300 x 500 (h) mm.
Power supply 220 V, 50 Hz, single phase, 1700 Watts
Weight 12 kg.

Product Code Product Description

PRS-CM00020 High Pressure Cement Autoclave, 230 V 50-60 Hz

STANDARDS : ASTM C151, C490; UNE 7207

The PRS-CM00020 High Pressure Cement Autoclave is designed to perform expansion tests on cement specimens.10 specimens can simultaneously be tested in the high pressure steam vessel of 154 mm diameter and 430 mm height.

The Autoclave consists of a pressure gauge, pressure regulator, temperature regülatör, control switches and safety valve.

PRS-CM0033 Two Gang Shrinkage mould should be ordered separately.

The High Pressure Cement Autoclave is supplied complete with;
â?¢ Specimen Rack, 10 samples capacity

Dimensions 450x475x1080 mm
Weight (approx.) 55 kg
Power 2600 W

Product Code Product Description

PRS- CM0065 Plunger Penetration Apparatus

STANDARDS : EN 413-2, 459-2, 1015-4

Plunger Penetration Apparatus is used to determine the consistency of fresh mortar, building lime and masonry cement. The test apparatus consists of a base to place the test cup and a vertical column holding the penetration plunger assembly.

The drop default height is adjusted to 100 mm. The plunger assembly weight is 90 g.

The Plunger Penetration Apparatus is supplied complete with;

â?¢ Test cup, Ã? 80 mm x 70 mm

â?¢ Tamper

Dimensions 200x200x600 mm

Weight (approx.) 6 kg

Product Code Product Description

PRS-CM0037 Digital Length Comparator

PRS-CM0038 Length Comparator with Length Measuring Sensor and Digital Readout Unit

STANDARDS : EN 1367â??4, 12617â??4, 12808-4; ASTM C151, C157, C227, C311, C341, C342, C441,C452, C490, C531, C596, C806, C878; BS 1881:5, 6073

Length Comparators are used to determine the length changes on different type of cement prisms.

The set consists of a length measuring frame with measuring device attached to it.

There are 2 models available; PRS-CM0037 is with 0.001 mm x 12,7 mm digital dial gauge (PRS-CM0152) and PRS-CM0038 is with special 0.0001 mm x 30 mm transducer and readout unit.

Reference rod and moulds should be ordered separately according to test to perform.

Product Code Dimensions Weight

PRS-CM0037 180x180x450 mm 6 kg

PRS-CM0038 250x250x650 mm 8 kg

Product Code Product Description

PRS-CM0010 Le Chatelier Mould

PRS-CM0014 Le Chatelier Soundness Kit

STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597

The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (PRS-CM0016) according to the relevant standard.

The Le Chatelier Soundness Kit is supplied complete with;
â?¢ Le Chatelier moulds 3 pcs.
â?¢ 50x50 mm glass plates 6 pcs.
â?¢ 300 gr Weights 1 pcs.
â?¢ 100 gr Weight, 3 pcs.
â?¢ Tamping Rod 17 mm dia. x 70 gr
â?¢ Steel Ruler
â?¢ Plastic Carrying Case

Dimensions 340x290x80 mm

Weight (approx.) 2 kg

Product Code Product Description

PRS-CM0050/A Vicat Test Set EN

PRS-CM0050/E Vicat Test Set ASTM

PRS-CM0051 Vicat Apparatus (Frame)

PRS-CM0052/E Vicat Mould EN Base ID 80 mm, Top ID 70 mm, Height 40 mm

PRS-CM0052/A Vicat Mould ASTM Base ID 70 mm, Top ID 60 mm, Height 40 mm

PRS-CM0053/E Initial Vicat Needle EN 1.13 mm dia.

PRS-CM0053/A Vicat Needle ASTM 1 mm dia.

PRS-CM0054 Final Vicat Needle EN 1.13 mm dia.

PRS-CM0055 Consistency Plunger 10 mm dia.

PRS-CM0056 Supporting Glass Plate

PRSTAS-0121 Transfer Dish for PRSTAS -0120 and PRS-CM0050

PRSGT-1305 Glass Thermometer Max. 110°C

PRSC-CM0057 Additiniol Weight, 700 gr, EN 480-2

STANDARDS : EN 196-3, 480-2; ASTM C187, C191; AASHTO T129, T131
The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method.
PRSTAS -0121 Transfer Dish which is used as a Water Wessel EN, for layering the vicat mould under water.
The Vicat Test Set is supplied complete with;
â?¢ Vicat Mould
â?¢ Initial and final Needles (for EN )
â?¢ Vicat Needle (for ASTM)
â?¢ Consistency Plunger
â?¢ Supporting Plate
â?¢ Glass Thermometer
â?¢ Transfer Dish (for EN)

Dimensions 150x190x318 mm
Weight (approx.) 3 kg

Product Code Product Description

PRS-CMA0050 Automatic Vicat Apparatus

STANDARDS : EN 196-3:2005; EN 13279-2 (GYPSUM);EN 480-2 /ASTM C187, ASTM C191

The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.Movements along X Y Z axes Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port Initial and final setting time (in 0.1 mm) Automatic cleaning of the needle Automatic stop and storage of measurements up to 50 tests.

Plunger for initial consistency Thermostatic baths (optional)

GLCD display for data input and diagram/test report.Printer for final test report and diagram

RS 232 serial port for PC connection Moulds and further needles have to be ordered separately, according to the various standards.

Power supply 220 V, 50 Hz, single phase.

Weight 40 kg.

Product Code Product Description

PRS-CM1462 Muffle Furnace 5 lt. 1200°C Max. Temperature with Programmable Timer, 20-240 V 50-60 Hz

STANDARDS : EN 196-2; ASTM C25, C115

PRS-CM1462 Muffle Furnace is used for determining the loss on ignition and insoluble residue of cement and building lime.

Working temprature and time can be programmed with PID digital control system.

Digital Thermometer Features

Temperature Controller PC 442/2

Max. Temperature 1200 °C

Max. Continuous Temperature 1150 °C

Temperature Deviation at Set Point ± 2°C

Heat Up Time to Max. Temperature 50. min

Internal Volume 5 L

Phase 1


Internal Dimension 140x180x200 mm

External Dimension 650x550x580 mm

Weight (approx.) 56 kg

Power 2000 W

Product Code Product Description

PRS-CM0100 Curing Cabinet 750 L, 220-240 V 50-60 Hz

STANDARDS : EN 196-1; ISO 679

The PRS-CM0100 Curing Cabinet is used for curing of cement, concrete cubes or other mortar specimens. It can be used for curing cement specimens within the mould, or after removing from the mould.

The curing cabinet provides 20 ± 1°C temp. and over 95% RH humidity for cement specimens. Internal chamber and racks are made of stainless steel. The temperature is maintained at 20 ± 1°C by a immersion heater and refrigerator unit which are supplied complete with cabinet. The cabinet is equipped with a digital control unit which controls and monitors the temperature.

The humidity is maintained from 95% to saturation by water nebulizers and is also monitored on the digital control unit.

Internal Dimension 900x700x1350 mm
External Dimension 1100x1000x2200 mm
Weight (approx.) 150 kg
Power 1200 W

Product Code Product Description

PRS-ZE0900 Sand Replacement Test Set 100 mm BS

PRS-ZE0901 Sand Pouring Cylinder 100 mm dia. for PRS-ZE0900

PRS-ZE0902 Calibration Container for PRS-ZE0900

PRS-ZE0903 Metal Tray for PRS-ZE0900

PRS-ZE0910 Sand Replacement Test Set 150 mm BS

PRS-ZE0911 Sand Pouring Cylinder 150 mm dia. for PRS-ZE0910

PRS-ZE0912 Calibration Container for PRS-ZE0910

PRS-ZE0913 Metal Tray for PRS-ZE0910

PRS-ZE0920 Sand Replacement Test Set 200 mm BS

PRS-ZE0921 Sand Pouring Cylinder 200 mm dia. for PRS-ZE0920

PRS-ZE0922 Calibration Container for PRS-ZE0920

PRS-ZE0923 Metal Tray for PRS-ZE0920

STANDARDS : BS 1377:9, 1924:2
The Sand Replacement Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminum and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes.

Product Code Dimensions Weight (approx.)
PRS-ZE0900 300x300x440 mm 8 kg
PRS-ZE0910 300x300x500 mm 14 kg
PRS-ZE0920 500x500x660 mm 27 kg

Product Code Product Description

PRS-ZE0950 Sand Cone Set 6.5"

PRS-ZE0960 Sand Cone Set 12"

PRS-ZE0952 Plastic Sand Jar 5 L, for PRS-ZE0950

PRS-ZE0962 Density Cylinder, 12"

STANDARDS : ASTM D1556; AASHTO T181, T191

The PRS-ZE0950 and PRS-ZE0960 Sand Cone Sets are used for the determination of the degree of compaction on site. PRS-ZE0950 includes double cone, plastic sand jar and metal tray with flanged hole.

PRS-ZE0962 Density Cylinder is used for determining in place density of compacted base courses containing large sizes of coarse aggregates.

Product Code Dimensions Weight (approx.)
PRS-ZE0950 300x300x550 mm 4 kg
PRS-ZE0960 600x600x650 mm 15 kg
PRS-ZE0962 470x320x260 mm 10 kg

Product Code Product Description

PRS-ZE0000-02 Direct Shear Test Machine ( Digital )

STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control.

The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically.

Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration.
The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test.

Technical Specifications

Capacities 2.5 Kn, 5 Kn or 10 Kn

Vertical Engine Stepper engine with built-in controls for vertical load

Horizontal Engine stepper motor with built-in controls for horizontal load

Speed Range 0.00003 to 15 mm per min.

Horizantal Travel +125 mm

Vertical Travel 12.5 mm

Power supply 220-240 V 1 ph 50 Hz 750 W

Dimensions: 228 x 560 x 762 mm

Product Code Product Description

PRS-ZE0024 Hand Operated Auger Boring Set

PRS-ZE0026 Extension Rod for PRS-ZE0024 , 1 meter

PRS-ZE0024 Hand Boring and Sampling Set for augering down to a depth of 5 meters.
The PRS-ZE0024 Hand Operated Auger Boring Set consists of a T-Handle with 1 m Rod, 80 mm, 100 mm and 150 mm diameter Auger Heads.

Extension rods should be ordered separately.

Dimensions 1100x200x200 mm

Weigth (approx.) 5 kg

Product Code Product Description

PRS-ZE0200 Manual Liquid Limit Device (Casagrande),BS

PRS-ZE0202 Manual Liquid Limit Device (Casagrande), ASTM - AASHTO

PRS-ZE0210 Motorized Liquid Limit Device (Casagrande), BS, 220-240 V 50-60 Hz

PRS-ZE0212 Motorized Liquid Limit Device (Casagrande),ASTM â??AASHTO 220-240 V 50-60 Hz

PRS-ZE0215 Metal Grooving Tool and Gauge Block, ASTM

PRS-ZE0216 Plastic Grooving Tool, ASTM

PRS-ZE0217 Plastic Grooving Tool, BS

PRS-ZE0218 Brass Grooving Tool, AASHTO

PRS-ZE0220 Resilience (Rebound) Tester, ASTM

PRS-ZE0221 Resilience (Rebound) Tester, TS 1900-1; AASHTO

PRS-ZE0225 Spare Brass Cup, for all Models

STANDARDS : ASTM D4318; BS 1377:2; AASHTO T89; TS 1900-1

The PARSROS Manual and Motorized Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state.
The Devices consist of an adjustable crank and cam mechanism, a blow counter and a removable brass cup fitted on the base. Different models with the same shape but with different base and cup weights are available according to the required specifications. Manual and Motorized versions are available.

PRS-ZE0200 and PRS-ZE0200 models are supplied with a BS type plastic grooving tool.

PRS-ZE0202 and PRS-ZE0212 models are supplied with a ASTM type plastic grooving tool.

Other types of grooving tools should be ordered separately.



Product Model Manual Motorized

Dimensions 240x230x150 mm 200x290x170 mm

Weight (approx.) 2 kg 4.2 kg

Product Code Product Description

PRS-ZE0170 Mechanical End-Over-End Shaker, 220-240 V 50-60 Hz

PRS-ZE0170 /110 Mechanical End-Over-End Shaker, 110 V 60 Hz

PRS-ZE01701 Gas Jar for PRS-ZE0170

The PRS-ZE0170 Mechanical End-Over-End Shaker is used for the determination of the particle density by the gas jar method and the particle size distribution by sedimentation.

End-Over-End Shaker is used to rotate two 1 L gas jars with rubber cover at approx. 50 rpm.
The 1 L capacity Gas Jar is made of plexiglass and supplied complete with Rubber Cover .

PRS-ZE0171cGas Jar should be ordered separately.

The Gas Jar is supplied complete with;
â?¢ Rubber Cover

Product Code Dimensions Weight (approx.) Power

PRS-ZE0170 900x700x600 mm 21 kg 180 W

PRS-ZE0171 120X120X270 mm 0.6 kg

Product Code Product Description

PRS-ZE1300 Constant Head Permeability Set for Ã? 80 mm cell

PRS-ZE1301 Constant Head Permeability Set for Ã? 120 mm cell

PRS-ZE1302 Constant Head Permeability Cell, 80 mm dia.

PRS-ZE1303 Constant Head Permeability Cell, 120 mm dia.

PRS-ZE1305 Wooden Stand with 3 Manometer Tubes

PRS-ZE1308 Constant Level Water Tank, 7 L.

PRSA-0645 Tamping Rod Ã? 8x300 mm

STANDARDS : BS 1377:5

The PRS-ZE1300 and PRS-ZE1301 Constant Head Permeability Set are used to study the behaviour of soil, relatively coarse-grained soil such as sands and gravel, in its natural conditions with respect to water flow.

Two models are available according to cell dimensions. The cells have an acryilic glass body with 3 pressure points at different level.

PRS-ZE1305 stand is fitted with 3 glass manometer tubes each being 1000 mm long.
PRS-ZE1308 Constant Level Tank 7 L, made of transparent plastic, is used to provide constant water level in the manometer tubes.

Optional Equipment For De-Airing Water and Tamping Rod should be ordered separately

The Constant Head Permeability Set is supplied complete with;
â?¢ Ã? 80 mm or Ã? 120 mm Permeability Cell with Pressure Points at 3 different levels and 2 pcs. Wire Gauze ( fit for the prefered cell dia. )
â?¢ Wooden Stand with 3 manometer tubes
â?¢ 3 m Hose

Product Code Dimensions Weight (approx.)

PRS-ZE1302 140x220x420 mm 3.5 kg

PRS-ZE1303 180x250x640 mm 7 kg

PRS-ZE1305 220x70x1700 mm 5.6 kg

PRS-ZE1308 300x200x250 mm 3 kg

PRSA-0645 Ã? 8x300 mm 0.5 kg

Product Code Product Description

PRS-ZE000035 Hydraulic Sample Extruder

PARSROS Hydarulic Sample Extruder is used for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from dia. 35 up to 101,6 mm with max. stroke of 900 mm.
The hydraulic piston is equipped of speed adjuster and can be stopped in any excursionâ??s position.

The extruded sample is held in place by a receiving table adjustable in height and easily lowered along side the machine to save space.

Complete with adaptors (ring + tamper) to extrude samples having dia. 38, 83, 100 mm

Max. load 30 kN

Dimensions (working position): 2741 x 635 xh 1200 mm

Power supply 220-240 V 1ph 50/60 Hz 1300 W

Weight: 160 kg

Product Code Product Description

PRS-ZEBDA1600 Balloon Density Apparatus 1600 Ml Capacity


STANDARDS : TS 1900-1,ASTM D2167,AASTHO T205

Used to determine the in-situ density of fine graded compacted orbonded soil. The apparatus is placed over the hole excavated in the soil, and water is pumped into a rubber balloon and forced into the hole. The amount of water displaced into the ballon is measured from the graduation of the scale.

The instrument consists of a graduated plexiglass cylinder 1600 ml. capacity, fitted in a corrosion resistant frame, a rubber pump with stop valve, a density plate and 12 rubber balloons.


Dimensions 250 x 240 x 680 mm
Weight 6.5 Kg

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
â?¢ Glass Plate, 300x300x5 mm
â?¢ Steel Reference Rod
â?¢ Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
â?¢ Porcelain Mixing Dish, 120 mm dia.
â?¢ Spatula, 120mm
â?¢ Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg

Product Code Product Description

PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine, 230 V, 50 Hz, 1 ph

PRS-KA0302 Cooling Recirculating Pump with Reservoir, 230 V, 50 Hz, 1 ph

PRS-KA0304 Diamond Cutting Blade, Ã? 230x2.5 mm thickness

PRS-KA0306 Double-Faced Cup Wheel, Ã? 200x16 mm

STANDARDS : ASTM D4543

The PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine is used for obtaining rock samples perfectly machined (cubes, prisms, etc.) from irregular rock or core pieces.

The PRS-KA0300 is supplied complete with a vice to hold irregular pieces firmly in place up to 70x140 mm approx. A second V shaped vice is used to cut cores to a maximum size 75 mm dia. x 140 mm height. Longer cores can be obtained by turning the samples upside down in the vice. It is supplied complete with a cooling water inlet.

The PRS-KA0304 Diamond Cutting Blade has a diameter of 230 mm, 2.5 mm thickness and the maximum cutting area is 110x70 mm. The speed of the blade is 3000 rpm.

The PRS-KA0306 Double-Faced Cup Wheel has a diameter of 200 mm and 16 mm thickness. It is used for finishing the sample ends parallel and at right angles to the axis.

The PRS-KA0306 Double-Faced Cup Wheel, PRS-KA0304 Cutting Blade and PRS-KA0302 Cooling Recirculating Pump with Reservoir should be ordered separately.
PRS-KA0300 and PRS-KA0302 for 60 Hz with 220 V or 100 V can be supplied.



Dimensions 730x1050x590 mm
Weigth (approx.) 100 kg
Power 1100 W

Testing Sieves

STANDARDS : EN 933-2; ISO 565, 3310-1, 3310-2; ASTM E11, 323

PARSROS offers a wide range of High Quality Testing Sieves which are used in all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials. PARSROS testing sieves are of the highest quality to ensure consistent fit, accurate specifications and durable construction.

Woven Wire Cloth and Perforated Plate Sieves are supplied in 200 mm and 300 mm frame diameters in various nominal aperture sizes suitable for several applications and standards. Wet Washing Sieves are used for wet testing of various materials enabling to wash the fines through the sieve without losing any of the sample. Available in 200 mm diameter with 100 mm and 200 mm deep models.

All parts of testing sieves are manufactured from stainless steel. Receiving Pans and Lids are available in stainless steel with 200 mm and 300 mm diameters.

Microscope For Cracks On Concrete

Product Code Product Description
PRS-BCM Microscope For Cracks On Concrete

It is used for determining the cracks on concrete; Adjustable lighting system
Sensitive measurement ( 10 mm / 0.001 mm )
Focusing system

ParsRos Automatic Compression Testing Machines

Product code

PRS-B423 2000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B6321 2000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/11 2000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B433 3000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B63000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6331/110 3000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz
PRS-B0210 High Precision Pressure Transducer and Electronic


PARSROS Automatic range of 2000 kN and 3000 kN capacity compression testing machines have been designed for reliable and consistent testing of a wide range of specimens.

These compression testers are the results of continu¨ous research to upgrade the testing machines with the latest technologies to conform to the latest standards EN 12390-3, 12390- 4, BS 1881 and ASTM C39 in terms of its technical properties taking into account client requirements. These also meet the requirements of CE norms for the safety and health of the operator.

The advantages of performing tests on computer with using PARSROS Software, such as reporting, graphical output, etc.,


PRS-B4321and PRS-B4331Testing Machine is supplied complete with;
205x90 mm, �? 205x50 mm and �? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) 300 mm, Lower Platen 300
mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4321 and PRS-B4331 testing machines.

PRS-B6321 and PRS-B6331 Compression Testing Machines are supplied complete with;
165x90 mm, 165x50 mm and 2 pcs. 165x30 mm distance pieces

PRS-B4511 Upper Platen (with ball seating assembly) 165 mm, Lower Platen 165 mm.
PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6321 and PRS-B6331 Compression Testing Machines.
Safety Features
Maximum pressure valves to avoid machine overloading
Piston travel limit switch
Emergency stop button
Front and rear transparent durable plexiglas guards
Software controlled maximum load value

Product Code

PRS-EU8050 : Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 : Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.

STANDARDS : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1

PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.
Advanced closed loop control system assures accurate load or displacement pace rate on sample.
The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.
The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.
The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

PRS-EU8050 supplied with;

â?¢ Compression Platens
â?¢ Load Cells 50 kN Capacity

PRS-EU8300 supplied with;

Compression Platens
Load Cells 300 kN Capacity

ACCESSORIES
Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez), Tiles, Flat Blocks etc. General Accessories;
1.PRSGM-0040 Load Cell, 5 kN Capacity
2.PRSGM-0042 Load Cell, 50 kN Capacity
3.PRSGM-0043 Load Cell, 300 kN Capacity
4.PRSGM-0115 Compression Platens, used to perform uniaxial and unconfined compression tests.
5.PRSM-0500 Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max Ã?:22 mm specimens)
6.PRSM-0520 Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature, standard temperature range: -40°C to +100°C (-40°F to 212°F).

Four Column Automatic Compression Testing Machines

Product Code Product Description

PRS-B5231 2000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B5331 3000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B5431 4000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B5531 5000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B0210 High Precision Pressure Transducer and Electronic


PRS-B5231 and PRS-B5331 Testing Machine is supplied complete with;

Ã? 205x90 mm, Ã? 205x50 mm and Ã? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.
PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B5231 and PRS-B5331 testing machines.

PRS-B5431 and PRS-B5531 Compression Testing Machines are supplied complete with;

2 pcs. Ã? 205x90 mm, 2 pcs. Ã? 205x50 mm and 2 pcs. Ã? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.
PRS-B4510, PRS-4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4531 and PRS-B5531 Testing Machines

Product Code Product Description

PRS-B4221 2000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B6221 2000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6221/110 2000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B4321 3000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B6321 3000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/110 3000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B0210 High Precision Pressure Transducer and Electronic


PARSROS Semi-Automatic (Motorized) range of 2000 kN and 3000 kN capacity compression testing machines have been designed for re¬liable and consistent testing of a wide range of specimens.

These compression testers are manufactured as a result of continuous research studies to upgrade the machines with the latest technologies to conform with the latest standards EN 12390-3, 12390-4, BS 1881 and ASTM C39 in terms of its tech¬nical properties taking into account the cli-ent requirements.

PRS-B4221 and PRS-B4321Testing Machine is supplied complete with;

â?¢ dia. 205x90 mm, dia 205x50 mm and dia 205x30 mm distance pieces

â?¢ PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4221 and PRS-B4321 testing machines.

PRS-B6221 and PRS-B6321 Compression Testing Machines are supplied complete with;

â?¢ dia165x90 mm, dia 165x50 mm and 2 pcs Ã? 165x30 mm distance pieces

â?¢ PRS-B4511 Upper Platen (with ball seating assembly) Ã?165 mm, Lower Platen Ã?165 mm.

PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6221 and PRS-B6321 Compression Testing Machines.

Product Code Product Description

PRS-B0750 Concrete Mixer Pan Type, 100 L, 220-240 V 50-60 Hz

The efficient mixing of concrete is essential if quality specimens are to be manufactured.The Pan Type Concrete Mixers is designed to give efficient mixing of both dry and wet materials.

The mixing pan is removable and tilts for easy access to the pan and emptying on completion of the mixing operation. The total volume of the pan is 100 liters but the effective capacity of the mixer is 56 liters.

The mixer head lifts clear to provide maximum access to the pan and holds the mixing blades at a constant depth during the mixing operation. The blades can be adjusted to suit the different types and volume of materials to be mixed. The pan type mixer is also equipped with rubber wheels which provide high portability.

All parts of the IP55 protected mixer are noncorrosive painted and galvanized.

Product Code PRS-B0750

Dimensions 950x1050x1250 mm

Weight (approx.) 255 kg

Power 1500 W

Product Code Product Description

PRS-ZE1200 Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 200 kN

PRS-ZE1201 Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 500 kN

PRS-ZE1202 Piston Assemly, 200 kN capacity, for Plate Load Bearing Test Sets

PRS-ZE1203 Piston Assemly, 500 kN capacity, for Plate Load Bearing Test Sets

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRS-ZE1204 Loading Plate Ã? 300 mm for PRS-ZE1200

PRS-ZE1205 Loading Plate Ã? 450 mm for PRS-ZE1200

PRS-ZE1206 Loading Plate Ã? 600 mm for PRS-ZE1201

PRS-ZE1207 Loading Plate Ã? 760 mm for PRS-ZE1201

PRS-ZE1220 Plate Loading Test Set, with Displacement Transducers and Data Logger, 200 kN

PRS-ZE1221 Plate Loading Test Set, with Displacement Transducers and Data Logger, 500 kN


This test method is used to estimate the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment (ASTM D1194). It is also used for load tests of soil and flexible pavement components for use in evaluation and design of airport and highway pavements.

PRS-ZE1200 Plate Loading Test Set consists of a 200 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 300 mm and 450 mm dia. loading plates,


PRS-ZE1201 Plate Loading Test Set Set consists of a 500 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 600 mm and 760 mm dia. loading plates.


All test sets supplied complete with 1,5 m long flexiable hose with qu

Aggregate Impact Value (AIV) Testing Apparatus

Product Code Product Description

PRS-A0650 Aggregate Impact Value (AIV) Testing Apparatus

The Aggregate Impact Value Testing Apparatus, meets with BS 812, it is robustly designed to determine the Aggregate Impact Value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact.

The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion.

The Aggregate Impact Value (AIV) Apparatus is supplied complete with;
â?¢ Cylindrical Measure, Ã? 75 mm,
â?¢ Steel Tamping Rod, Ã? 16x600 mm

Dimensions 450x350x850 mm

Weight (approx.) 52 kg

Product Code Product Description

PRS-A0610 Wide Wheel Abrasion Testing Machine, 220-240 V 50 Hz(110 V 60 Hz version is available upon request)

PRS-A0610/1 Wide Abrasion Wheel, for PRS-A0610

PRS-A0610/2 Convert Equipment Set from PRS-A0610 Wide Wheel Abrasion Testing Machine to PRS-A0613 Narrow Wheel Abrasion Testing Machine

PRS-A0611 Abrasive Corundum Sand 25 kg for PRS-A0610 and PRS-A0613

PRS-A0613 Calibration Marble for PRS-A0610

PRS-A0612 Narrow Wheel Abrasion Testing Machine, 220-240 V 50 Hz (110V 60Hz version is available upon request)

PRS-A0613/1 Narrow Abrasion Wheel, for PRS-A0613

PRS-A0613/2 Convert Equipment Set from PRS-A0613 Narrow Wheel Abrasion Testing Machine to PRS-A0614 Wide Wheel Abrasion Testing Machine

PRS-A0610 Mould, EN 12808-2, Polyethylene, 100 ±1x100 ±1x10 ±1 mm, for PRS-A0613


STANDARDS
Wide Wheel : EN 1338, 1339, 1340, 1341, 1342, 13748-1,13748-2, 14157 Narrow Wheel: 10545-6, 12808-2

PRS-A0610 Abrasion Testing Machine is designed for determining the resistance to abrasion/wear of natural stones and concrete products used for paving. The abrasion wheel is 70 mm thick and rotates at a speed of 75 rpm. The machine is equipped with adigital counter which stops the machine at the end of a preset number of revolutions.

PRS-A0613 Narrow Wheel Abrasion Testing Machine is designed for determining the resistance to abrasion of unglazed tiles, grouts used for tiles and clay pavers. The abrasion wheel is 10 mm thick. Abrasive corundum sand, calibration marble (boloneisse) and mould (for EN 12808-2) should be ordered separately. PRS-A0610 and PRS-A0613 Abrasion Testing Machines can be convert the other.
When there is a need for abration of different type materials, PRS-A0610 Machine can be convert to PRS-A0613 Machine and also PRS-A0613 Machine can be convert to PRS-A0610 Machine by using PRS-A0610/2 or PRS-A0613/2 by users.

Appropriate convert equipment set (PRS-A0610/2 or PRS-A0613/2) should be ordered seperately.

Dimensions 620x670x1350 mm
Weigh (approx.) 130 kg
Power 370 W

Product Code Product Description

PRS-A0800 Aggregate Abrasion Value (AAV)Machine,220-240 V 50-60 Hz

PRS-A0802 Graded (Abrasion) Sand 25 kg x 2 packs for PRS-A0800

STANDARDS :
The Abrasion Machine is used to determine the Aggregate Abrasion Value (AAV) by testing the measure of the resistance of aggregates to surface wear by abrasion. The Abrasion Machine consists of a flat circular cast iron grinding lap wheel of 600 mm dia. which rotates in a horizontal plane at a speed of 28-31 r.p.m. The abrasion sand is fed across the surface of the specimen samples through a special funnel.

Graded sand should be ordered separately.

The Aggregate Abrasion Value (AAV) Machine is supplied complete with;
â?¢ Specimen Moulds, 2 units
â?¢ Trays, 2 units
â?¢ Flat Plates, 2 units
â?¢ Weights
â?¢ Clamps

Dimensions 800x700x1100 mm
Weight (approx.) 200 kg
Power 370 W

Product Code Product Description

PRS-A0810 Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz

PRS-A0812 Corn Emery 5 kg, for PRS-A0810

PRS-A0813 Flour Emery 5 kg, for PRS-A0810

PRS-A0814 Control Stone 50 kg Ungraded, for PRS-A0810, PSV value in the range 50 to 60
PRS-A0815 Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for PRS-A0810, PSV value in the range 60 to 65


Accelerated Polishing Machine (PSV) is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor.
Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment.

PRS-A0814 Control Stone and PRS-A0815 Friction Tester Reference Stone should be ordered separately.

The Accelerated Polishing Machine is supplied complete with;
â?¢ Road Wheel,
â?¢ Side Plate,
â?¢ Rubber Rings,
â?¢ Solid Rubber- Tired Wheel - 2 units,
â?¢ Drive Belt,
â?¢ Abrasive Feed Mechanism,
â?¢ Corn Emery - 5 kg,
â?¢ Flour Emery - 5 kg,
â?¢ Tool Kit,
â?¢ Specimen Moulds - 2 pcs,
â?¢ 2 Mould Plates


Road Wheel Speed 315 to 325 r.p.m

Dimensions 740x720x1520 mm

Weight (approx.) 175 kg

Power 850 W

Sand Equivalent Shaker

Product Code Product Description

PRS-A0510 Sand Equivalent Shaker

PRS- A0510 Sand Equivalent Shaker is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at a specified rate and stroke.

The shaker is supplied complete with a timer. The horizontal movement, cycle and shaking time can easily be adjusted on the shaker to comply with EN or ASTM standards.

The Sand Equivalent Shaker is supplied complete with;

â?¢ Safety Cover (conforming with CE directives)

â?¢ Timer

Product Code Product Description

PRS-A1000 Specific Gravity Frame

PRS-A1003 Plastic Water Tank

PRS-A1005 Cradle for Hardened Concrete Specimens

PRS-A1010 Density Basket Ã? 200 mm x 200 mm deep


The Specific Gravity Frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates.

Consisting of a purpose built robust frame designed to support the electronic balance (not supplied), a wire basket and plastic water tank. The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water.

Any type of electronic balance fitted with under-bench weighing facility can be used. Balance, Cradle and Density Basket should be ordered separately.

The Specific Gravity Frame is supplied complete with;
â?¢ A water tank

Dimensions 600x500x1100 mm

Weight (approx.) 25 kg

Product Code Product Description

PRS-A0450 Laboratory Type Jaw Crusher, 380 V 50 Hz

PRS-A0460 Vibrating Disc Mill, 220-240 V 50-60 Hz

PRS-A0470 Knife Mill, 220-240 V 50-60 Hz

PRS-A0450, PRS-A0460 and PRS-A0470 are used for crushing aggregates, core samples or similar materials in the laboratory when smaller sample sizes are required for testing. Three models are available (see Technical Specifications) depending on different feed, output grain sizes and capacity requirements.

Technical Specifications

Product Code Maximum Feed Size Output Grain Size

PRS-A0450 100x100 mm 0-8 mm, adjustable

PRS-A0460 10 mm max. 10 μm

PRS-A0470 20 mm 0.5 - 2.0 mm, by using suitable sieves

Product Code Dimensions Weight (approx.) Power

PRS-A0450 800x900x980 mm 300 kg 1500 W
(for all models)
PRS-A0460 850x630x1050 mm 350 kg

PRS-A0470 450x530x710 mm 75 kg

Product Code Product Description

PRSD -1440 Freezing and Thawing Chamber 285 L, 220-240 V 50-60 Hz

STANDARDS : , 13450; CEN/TS 12390-9
Used for the determination of resistance to freezing and thawing by providing freezing / thawing in air.
The chamber is equipped with a user defined program including 10 steps. Time can be adjusted to 999 minutes for each step of the program. The temperature range of the cabinet is -30°C to +30°C.
The temperature is controlled by a sensor which can be immersed either into the sample, into the water which the sample is placed into or, into the salty water solution placed on the sample before starting the test.

The calibration of the sensor is carried out using the user friendly menu.The distribution of temperature in the cabinet is performed using an integral fan.

Software for data transfer to a computer is supplied complete with the cabinet, and data can be monitored during the tests. Data can be converted to an excel report or to a graph.

The condenser of the cabinet is fitted with an air cooled hermetic cooler. The gas used for the cooler does not include CFCâ??s.

The control unit is electronic and equipped with digital display with 0.1°C temperature resolution. The temperature distribution accuracy in the cabinet is not higher than 2°C.
The user can preset the time of each ramp and the number of each set by using the control unit.

Internal Dimensions 500x500x900 mm
External Dimensions 680x650x1980 mm
Weight (approx.) 140 kg
Power 1800 W

Product Code Product Description

PRS-A0320 Grid Sieve Set (Flakiness Index Sieve Set EN)

PRS-A0321 Grid Sieve (Flakiness Index Sieve EN) 2.5 mm

PRS-A0322 Grid Sieve (Flakiness Index Sieve EN) 3.15 mm

PRS-A0323 Grid Sieve (Flakiness Index Sieve EN) 4 mm

PRS-A0324 Grid Sieve (Flakiness Index Sieve EN) 5 mm

PRS-A0325 Grid Sieve (Flakiness Index Sieve EN) 6.3 mm

PRS-A0326 Grid Sieve (Flakiness Index Sieve EN) 8 mm

PRS-A0327 Grid Sieve (Flakiness Index Sieve EN) 10 mm

PRS-A0328 Grid Sieve (Flakiness Index Sieve EN) 12.5 mm

PRS-A0329 Grid Sieve (Flakiness Index Sieve EN) 16 mm

PRS-A0330 Grid Sieve (Flakiness Index Sieve EN) 20 mm

PRS-A0331 Grid Sieve (Flakiness Index Sieve EN) 25 mm

PRS-A0332 Grid Sieve (Flakiness Index Sieve EN) 31.5 mm

PRS-A0333 Grid Sieve (Flakiness Index Sieve EN) 40 mm

PRS-A0334 Grid Sieve (Flakiness Index Sieve EN) 50 mm

STANDARDS :
It is used for the determination of the flakiness index of the aggregate.
Consisting of an electrostatically painted frame and 5 mm diameter stainless steel bars with apertures state below.
For sample preperation 4.5, 6.3, 8, 10, 12.5, 16, 20, 25, 31.5, 40, 50, 63, 80 and 100 mm aperture sizes test sieves should be ordered seperately.

Product Code Product Description

PRS-A0115 Thickness Gauge (Flakiness Index BS)

STANDARDS :
Thickness Gauge is used to determine if the aggregate particles are to be considered as flaky, i.e. their thickness is less than 0.6 of their nominal size.

The aggregate to be classified is separated into seven sieve fractions from 6.3 to 63 mm, and each fraction is examined separately. Slot sizes are 4.9 x 30 mm, 7.2 x 40 mm, 10.2 x 50 mm, 14.4 x 60 mm, 19.7 x 80 mm, 26.3 x 90 mm and 33.9 x 100 mm.

Dimensions 310x130x10 mm
Weight (approx.) 0,4 kg

Product Code Product Description

PRS-AS0030 Centrifuge Extractor 1500 g, 220-240 V 50-60 Hz

PRS-AS0030/110 Centrifuge Extractor 1500 g, 110 V 60 Hz

PRS-AS0031 Filter Paper 250 mm Outer dia. 45 mm Inner dia. for PRS-AS0030 (100 pcs / Pack)

PRS-AS0032 Rotating Bowl and Cover for PRS-AS0030

PRS-AS0035 Centrifuge Extractor 3000 g capacity, 220-240 V 50-60 Hz

PRS-AS0035/110 Centrifuge Extractor 3000 g capacity, 110 V 60 Hz

PRS-AS0036 Filter Paper 295 mm Outer dia. 45 mm Inner dia. for PRS-AS0035 (100 pcs / Pack)

PRS-AS0037 Rotating Bowl and Cover for PRS-AS0035

STANDARDS : EN 12697-1 Clause B.1.5; AASHTO T164 A; ASTM D2172 A
The Centrifuges are used for the determination of the bitumen percentage in bituminous mixtures. All models comprise a removable precision-machined rotor bowl housed in a cylindrical aluminum box. The bowl is driven by an electric motor fitted with an AC drive (inverter) with the double function of speed control up to 3600 rpm regardless of the frequency (50 or 60 Hz) and electrical breaking. The centrifuge can be set for the automatic speed ramp up to 3600 rpm and will stop in 10-15 seconds.

The cover is precisely machined and fitted with a solvent resistant gasket to avoid leakages.
The control panel includes: Start/Stop button and speed control knob.

The Centrifuge Extractor is supplied complete with;
â?¢ Bowl and Cover,
â?¢ Filter Paper - 100 pcs.

Dimensions 450x650x550 mm
Weight (approx.) 50 kg (for both models)
Power 370W (for both models)

Product Code Product Description

PRS-AS0135 Water in Bituminous Materials Test Set (Dean-Stark Method) 220-240 V 50 Hz

STANDARDS : ASTM D95, D244; AASHTO T55, T59; IP 74/77; CNR No.101; NLT 123

The PRS-AS0135 test set is used for determining the water content of bituminous materials. The test is based on distilling the sample with a volatile solvent. The material to be tested is heated under reflux with a water immiscible solvent, which distills together with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settles in the graduated section of the trap, and the solvent returns to the still.

Test Set Consists Of;
â?¢ Electric Heater with Thermo Regulator
â?¢ Glass Condenser
â?¢ Glass Receiver
â?¢ Glass Still, 10 ml

Dimensions 200x200x450 mm
Weight (approx.) 4 kg
Power 250 W

Product Code Product Description

PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer 220-240 V 50-60 Hz

PRS-AS0120/110 Semi-Automatic Digital Bitumen Penetrometer 110 V 60 Hz

PRS-AS0121 Transfer Dish for PRS-AS0120

PRS-AS0122 Sample Cup, Ã? 55x35 mm, stainless steel

PRS-AS0123 Sample Cup, Ã? 70x45 mm, stainless steel

PRS-AS0124 Penetration Needle, 2,5 g

PRS-AS0160 One-Quarter Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126

PRS-AS0161 One-Half Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126

PRS-AS0162 Penetrometer Cone ASTM D 217 (Optional Type) and ASTM D 937, for PRS-AS0120 and PRS-AS0126, Brass

PRS-AS0165 Resilience Ball Penetration Tool. ASTM D5329, for PRS-AS0120 and PRS-AS0126

STANDARDS : EN 1426; ASTM D5; AASHTO T49
The PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature. The Penetrometer consists of a cast iron base with coarse and fine levelling screws, a digital penetration measurement gauge 0.01 mm readability and a penetration timer unit.
Start button of the penetration timer unit is used to release the plunger fitted with the needle to start the 5 seconds test.
A water bath (PRSGE-AS4000 or PRSGE-AS4050, 25±0,1 C) and a thermometer ( IP38, ASTM 17C or 63C ) required for the test should be ordered separately.


The Semi-Automatic Digital Bitumen Penetrometer is supplied complete with;
â?¢ Penetration Needle, 2,5g, 1 pieces
â?¢ Transfer Dish
â?¢ Sample Cup Ã? 55x35 mm, 3 pieces, stainless steel
Dimensions 200x300x500 mm
Weight (approx.) 16 kg

Air Entrainment Meter for Mortar

Product Code Product Description

PRS-CM0066 Air Entrainment Meter for Mortar 1 lt.

STANDARDS : EN 413-2, 459-2, 1015-7

The PRS-CM0066 Air Entrainment Meter for Mortar is used for determining the air content of cement paste, cement mortar and lime mortar. The air entrainment meter is manufactured from cast aluminum, the upper part and the lower test pot are held together with an air-tight seal which are easily adjusted by using the two spring clamps.

The pressure gauge is installed in the head of the meter and the scale works in the 0-20 volumetric % range. The air is compressed with a hand pump installed in the system and the smart configuration of the test and correction buttons enables fast and simple testing.

Dimensions 200x200x320 mm
Weight (approx.) 3,5 kg

Product Code Product Description

PRS-CM0016 Le Chatelier Water Bath, 220-240 V 50-60 Hz

STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597

The PRS-CM0016 Le Chatelier Water Bath is used with Le Chatelier moulds for the determination of the soundness of cement paste fly ash for concrete and lime. The internal chamber and the insulated exterior case of the bath are manufactured from stainless steel. The Bath is capable of reaching boiling point in 30 minutes by using two heater units.

There is a timer on the PRS-CM0016 Le Chatelier Water Bath which is used to set the time for reaching the boiling point. After that time the temperature of water is regulated by using one heater unit to conserve energy. Supplied complete with a removable rack to hold up to 10 moulds. A cover is also supplied as standard.
Dimensions 210x470x290 mm
Weight (approx.) 8 kg
Power 1250 W

Product Code Product Description

PRS-CM0003 Le Chatelier Flask

STANDARDS : EN 196-6, 450-1, 15617-1; ASTM C110, C128, C188; C989; AASHTO T133

The PRS-CM0003 Le Chatelier Flask is used to determine the density of hydraulic cement, ground granulated blast-furnace slag and fly ash for concrete, filler aggregates and lime.The glass flask has a 250ml capacity. The neck is graduated from 0 to 1 ml and from 18 to 24 mL in 0.1-mL graduations.

Dimensions 100x100x300 mm

Weight (approx.) 0.1 kg

Product Code Product Description

PRS-CM0069 Bulk Density Apparatus

STANDARDS : EN 459-2

The bulk density of lime is of interest for storage and packaging and for determining volume and capacity of mixing equipment necessary for processing the material.

The PRS-CM0069 Bulk Density Apparatus is designed to determine bulk density by allowing a sample to fall from a known height into a volumetric container.

The apparatus consists of a hopper, 1 liter capacity cylindrical container and a spring-loaded trap.

Dimensions 250x250x750 mm

Weight (approx.) 2 kg

Product Code Product Description

PRS-CM0070 Slaking Vessel

STANDARDS : EN 459-2

PRS-CM0070 Slaking Vessel is used to determine the yield of lime by leaving the lime sample to slake into. Stainless steel made and double walled insulated. The cylinder has inside dimensions dia. 113 mm by 140 mm deep. Supplied complete with cover.

Dimensions 120x120x160 mm
Weight (approx.) 4 kg

Product Code Product Description

PRS-CM0058 Gillimore Apparatus

STANDARDS : ASTM C91, C141, C150, C266; AASHTO T154

The PRS-CM0058 Gillmore Apparatus is used to determine the setting time of cement hydraulic hydrometer lime and mortar. Apparatus consists of two horizontally positioned arms, carrying weighted needles, initial needle has a 2.12 mm diameter and 113.4 g in weight and the final needle has a 1.06 mm diameter and 453.6 g in weight.

Dimensions 300x100x300 mm
Weight (approx.) 2,5 kg

Product Code Product Description

PRS-ZE0600 Standard Proctor Mould, ASTM

PRS-ZE0602 Standard Proctor Compaction Rammer,ASTM

PRS-ZE0604 Modified Proctor Mould, ASTM

PRS-ZE0606 Modified Proctor Compaction Rammer, ASTM

PRS-ZE0608 A Type Proctor Mould (Standard), EN

PRS-ZE0608/1 Steel Plate for The End Layer Compaction for PRS-ZE0608, EN

PRS-ZE0610 A Type Proctor Compaction Rammer (Low Energy-Standard), EN

PRS-ZE0612 B Type Proctor Compaction Mould (Modified), EN

PRS-ZE0612/1 Steel Plate for The End Layer Compaction for PRS-ZE0612, EN

PRS-ZE0614 B Type Proctor Compaction Rammer (Medium Energy-Modified), EN

PRS-ZE0615 1 Liter Mould (Standard Proctor), BS, TS 1900-1

PRS-ZE0616 2.5 kg Compaction Rammer, BS

PRS-ZE0750 CBR Type Mould, BS (Modified Proctor) Vibrating Hammer Mould BS, EN, TS 1900-1

PRS-ZE0618 4.5 kg Compaction Rammer, BS

STANDARDS: ASTM D 698, D 1557, D 558 ; AASHTO T 99, T180, T 134 ; EN 12386-2, 13286-4 BS 1377:4,1924:2

Moulds and rammers are used for determining the relationship between the moisture content and density of compacted soil. Made of plated steel, includes collar, mould body and base plate. Rammers are used to compact the soil sample in the Proctor Moulds and made of plated steel. Different models are available conforming to the relevant standards.

Product Code Product Description

PRS-ZE0620 Automatic Soil Compactor, 220-240 V 50 Hz (60 Hz version is available upon request)

PRS-ZE0620/110 Automatic Soil Compactor, 110 V 60 Hz

PRS-ZE0622 ASTM/EN/BS Rammer for PRS-ZE0620

PRS-ZE0624 ASTM Rammer Face Ã? 50.8 mm for PRS-ZE0620

PRS-ZE0625 EN/BS Rammer Face Ã? 50 mm for PRS-ZE0620

STANDARDS : ASTM D558, D559, D560, D698, D1557, D1883; EN 13286 2, 13286-47; BS 1377:4 AASHTO T99, T134, T135, T136, T180, T193; NLT 107/98, 108/91, 111/87

PRS-ZE0620 Automatic Soil Compactor is designed to compact specimens automatically and uniformly, assuring conformity with the above listed international standards.

The principle of the design is to allow the hammer to drop the required height into the soil in the mould which rotates circularly to distribute the blows uniformly over the surface of the specimen in the mould. The drop height is adjustable to 300 mm, 305 mm, 450 mm and 457 mm.

The rammer is circular faced and interchangeable to 50 mm or 50.8 mm diameter. Rammer weight is adjustable to 2.5 kg or 4.5 kg according to reference standard. When compacting 100 mm diameter specimens the unit operates on a single radius and when compacting 150 mm diameter specimens the unit operates on iner and outer radius to obtain even compaction.

The number of blows per layer can be set at the beginning of the compaction process by the digital counter according to the standard preferred by user. This automatic blow pattern ensures effective and equal compaction for each layer of soil by rotating the base table, so the mould, in equal steps and travelling the rammer across the mould. User defined blow number and in-out distribution is also available.

Compactor is equipped with programmable digital counter which allows the machine;
â?¢ To select reference standard ( number of blows and mould size ) by the operator at the beginning of the test.

â?¢ To set desired compaction cycle ( number of blows and count of the number of inner and outer drops) by user.

Rammers

EN / BS Circular faced, 50 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

ASTM Circular faces, 50.8 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

Drop Height

BS Adjustable to 300 mm or 450 mm

ASTM / AASHTO / EN Adjustable to 305 mm or 457 mm

The Automatic Soil Compactor is supplied complete with;
â?¢ ASTM/EN/BS Rammer
â?¢ ASTM Rammer Face, Ã? 50.8 mm.
â?¢ EN/BS Rammer Face, Ã? 50 mm.

Dimensions 650x550x1550 mm

Weight (approx.) 150 kg

Power 370 W

Product Code Product Description

PRS-ZE0080 Field Inspection Testing Kit

PRS-ZE0082 Field Inspection Pocket Vane Tester

PRS-ZE0082/1 Extension Rod for PRS-ZE0082

PRS-ZE0084 Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2

STANDARDS : ASTM D2573

The PRS-ZE0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists and agronomists. It consists of the PRS-ZE0084 Pocket Penetrometer and of the PRS-ZE0082 Field Inspection Pocket Vane Tester. The instrument is contained in a practical carrying case.

PRS-ZE0080 Field Inspection Testing Kit

Dimensions (packed) 240x210x50 mm

Weigth (approx.) 1.8 kg

The PRS-ZE0082 Field Inspection Pocket Vane Tester is especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod. All stainless steel construction. Supplied in a plastic case. Extension rod should be ordered separately.

PRS-ZE0082 Field Inspections Pocket Vane Tester

Vane Dimensions (height x dia.) 32x16; 40x20, 50.8x25.4 mm

Measuring Range 0 to 240 kPa (0-24 N/cm')

Torque Value 5 N - m

Extension Rod 500 mm depth.

Overall Dimensions (assembled) 310x105 mm

Weight 1.3 kg

The PRS-ZE0084 Heavy Duty Pocket Penetrometer is designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Heavy duty model is all stainless steel construction, three interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil, 8.98 mm for soft soil. Supplied complete with plastic case.

PRS-ZE0084 Heavy Duty Pocket Penetrometer

Measuring Range 0 to 10 kgf/cm'

Dimensions (assembled) 210 mm length x 20 mm dia.

Weight (approx.) 0.5 kg

Product Code Product Description

PRS-ZE0270 Hydrometer Test Set

PRS-ZE0272 Soil Dispersion Mixer, 220-240 V 50-60 Hz

PRS-ZE0273 Hydrometer Bath, 220-240 V 50-60 Hz

PRS-ZE0274 Hydrometer 151H

PRS-ZE0275 Hydrometer 152H

PRS-ZE0276 Hydrometer Jars, 1000 ml

PRSGC-0900 Sodium Hexametaphosphate, 1kg

STANDARDS : ASTM D422; AASHTO T88

Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay.
The soil dispersion mixer for hydrometer test method, operates at over 13,000 r.p.m, includes dispersion cup, stirring paddle, automatic switch-on by positioning bowl, 100 W power consumption
The hydrometer bath, circulation unit, ambient to 35°C working temperature, 50 L capacity tank with 8 pcs. sedimentation cylinder capacity.

152H Hydrometer should be ordered separately.

The Hydrometer Test Set is supplied complete with;
â?¢ Dispersion mixer
â?¢ Hydrometer bath
â?¢ Hydrometer, 151H, 1pcs.
â?¢ Sodium hexametaphosphate 1 kg,
â?¢ Sedimentation cylinder, 1000 ml, 6 pcs.
â?¢ Heater,
â?¢ Circulation unit
â?¢ Rubber stopper for sedimentation cylinder
â?¢ Beaker, 600 cc

151 H Hydrometer 11 â?? Length 0,995-1,038 g/ml Ä°n 0,001 g/ml division

152H Hidrometre 11â?� Lenght 5 - 60 g/L in 1g/L Ä°n 1g/L division


Dimensions 330x630x450 mm

Weight (approx.) 20 kg

Product Code Product Description

PRS-ZE0630 Vibratory Compactor Set, 220-240 V 50 Hz

PRS-ZE0750 CBR Type Mould BS (modified proctor) Vibrating Hammer Mould EN

PRS-ZE0768 C Spanner for PRS-ZE0750, 2 pcs

PRS-ZE0770 Assembly Tool for Base Plate for PRS-ZE0750

STANDARDS: EN 13286-4; BS 1377:4 / EN 12697-9, 12697-10, 12697-32

The PRS-ZE0750 Vibratory Compactor Set is used to prepare the test specimens of road base and sub base materials by using the vibratory compaction technique. The specimens prepared from road base and sub base materials is used for the proctor and CBR tests.

The set is also used for preparing the test specimens of bituminous mixtures
PRS-ZE0750 mould with base plate and extension collar should be ordered separately and also when ordering PRS-ZE0750, PRS-ZE0768 and PRS-ZE0770 should be ordered separately for assembling and dissambling.

The Vibratory Compactor Set is supplied complete with;

â?¢ Vibrating Hammer
â?¢ Supporting Frame
â?¢ Small Tamping Foot, 102 mm dia.
â?¢ Large Tamping Foot, 146 mm dia.
â?¢ Shank, 300 mm

Dimensions 510x300x1120 mm

Weight (approx.) 75 kg (complete set)

Power 1150 W (vibrating hammer)

Product Code Product Description

PRS-ZE0235 Linear Shrinkage Mould

STANDARDS : BS 1377:2
The PRS-ZE0235 , Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils with low clay content.

Dimesions 140x140x13 mm
Weight (approx.) 0,3 kg

Product Code Product Description

PRS-ZE1320 Falling Head Permeability Set

PRS-ZE1322 Falling Head Permeability Cell 100 mm dia.

PRS-ZE1324 Wooden Stand with 4 Manometer Tubes

PRS-ZE1326 Soaking Reservoir Tank

STANDARDS : BS 5930:1999, / 1377, ASTM 46 / 47

The PRS-ZE1320 Falling Head Permeability Set is used to study the behaviour of soil, particularly finegrained soils such as clay-like or silty soils, with respect to water flow.
The PRS-ZE1322 Falling Head Permeability Cell is manufactured from plated steel with an inside diameter of 100 mm.

The PRS-ZE1324 Wooden Stand is fitted with 4 glass Manometer Tubes of each 1500 mm long with inside diameters of about 21 mm, 12 mm, 5 mm and 3.5 mm. All tubes have connection valves.

The PRS-ZE1326 Soaking Reservoir Tank is manufactured from plated steel with an over-flow tube and is used for containing the permeability cell during the test.
Optional Equipment For De-Airing Water should be ordered separately.

The PRS-ZE1320 Falling Head Permeability Set is supplied complete with;
â?¢ Ã? 100 mm Falling Head Permeability Cell
â?¢ Wooden Stand with 4 manometer tubes
â?¢ Soaking Reservoir Tank
â?¢ 3 m Hose

Product Code Dimensions Weight (approx.)

PRS-ZE1322 150x150x260 mm 3 kg

PRS-ZE1324 230x100x1700 mm 6.6 kg

PRS-ZE1326 320x320x250 mm 3.6 kg

Product Code Product Description

PRS-ZE1500 Pinhole Test Apparatus

PRS-ZE1502 PVC Tubing Ã? 10x8 mm 10 m Coil

STANDARDS : BS 1377:5; ASTM D4647

Water flowing through fine-grained soils with high sodium content makes them highly erodible.
The PRS-ZE1500 Pinhole Test Apparatus is used for evaluating the erodibility of clay soils by flowing water through a small hole that is drilled through the compacted specimen.
The apparatus consists of a cylindrical metal container fitted one end with a water inlet and the other end with an outlet connection, a standpipe tube with scale and a stand to support the apparatus.

Dimensions 150x200x1200 mm
Weight (approx.) 3.5 kg

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Product Code Product Description

PRS-KA0555 Hoek Triaxial Cell BX, 42.04 mm dia.

PRS-KA0556 Spare Sealing Sleeves for Hoek Triaxial Cell BX

PRS-KA0557 Hoek Triaxial Cell NX, 54.7 mm dia.

PRS-KA0558 Spare Sealing Sleeves for Hoek Triaxial Cell NX

PRS-KA0560 Hoek Triaxial Cell HQ, (Ã? 63,5 mm)

PRS-KA0561 Spare Sealing Sleeves HQ, (Ã? 63,5 mm) for Hoek Triaxial Cell

Hoek Cells have been designed to be used for triaxial testing of rock specimens.
Hoek Cells comprise a steel body complete with two quick release self-sealing couplings, two steel end caps which are screwed to the cell body, 2 pieces of upper and 2 pieces of lower loading caps with spherical coupling and a rubber sealing sleeve to separate the specimen from the cell fluid.

Dimensions 350x150x200 mm

Weigth (approx.) 15 kg

Product Code Product Description

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

STANDARDS : ASTM D2938

The jig assembly is used for uniaxial compressive strength tests of rock core specimens with 50 to 55 mm dia. and 100 to 110 mm height and consists of a two-column frame fit with an upper platen with spherical seat that moves vertically sustained by a spring. The lower platen is fit to the base.The assembly is also used for compressive shtenght test of natural stone core specimens.
PRS-KA0568 Compression Jig Assembly is used for uniaxial compressive strength for rock core specimens.

Platens Dimensions 55 mm dia, 28 mm thick

Min. Hardness of Platens 58 HRC

Vertical Clearance 122 mm

Dimensions 120x120x250 mm

Weigth (approx.) 10 kg

Product Code Product Description

PRSD-1295 Laboratory Oven 50 lt., 220-240 V 50-60 Hz

PRSD -1300 Laboratory Oven 120 lt., 220-240 V 50-60 Hz

PRSD -1305 Laboratory Oven 250 lt., 220-240 V 50-60 Hz

PRSD -1310 Laboratory Oven 500 lt., 380 V 50 Hz

PRSD -1315 Laboratory Oven 700 lt., 380 V 50 Hz

STANDARDS: EN 932-5, 1097-5; ASTM C127, C136, D558, D559, D560, D698, D1557, D1559 BS 1377:1, 1924:11; UNE 103300


PARSROS * PRSD Series Laboratory Ovens have been designed for drying asphalt, soil, rock, concrete, aggregate or similar materials. 50, 120, 250, 500 and 750 liter capacity models are available. Temperature range is from ambient to 200°C. The interior is manufactured from stainless steel and the exterior is robustly constructed from sheet steel finished in powder coated paint.

All models are fan circulated (forced convection), fitted with direct reading digital control unit and equipped with an analogue overtemperature protection thermostat. Laboratory Ovens are supplied complete with 2, 3, 4 or 5 shelves according to the capacity.

Product Code Internal Dimension External Dimension Weight (approx.)

PRSD-1295 410x350x360 mm 580x600x570 mm 20 kg

PRSD -1300 610x500x400 mm 770x750x650 mm 56 kg

PRSD -1305 800x600x570 mm 970x840x790 mm 85 kg

PRSD -1310 1100x790x580 mm 1401x920x770 mm 130 kg

PRSD -1315 1400x890x570 mm 1600x1130x770 mm 170 k

Product Code Product Description

PRSG-0413 Sieve Shaker with Frequency and Time Adjustment, for 200/300/400mm

(8â?�/12â?�/16â?�) Dia. Frame Sieves. 220-240 V 50-60 Hz

PRSG-0413/110 Sieve Shaker with Frequency and Time Adjustment, for 200/300/400mm (8â?�/12â?�/16â?�) Dia. Frame Sieves, 110 V 60 Hz


STANDARDS : EN 932-5; ISO 565, 3310-1, 3310-2; ASTM E11, 323; BS 410-1, 410-2

The PRSG-0413 Sieve Shaker is fitted with a very efficient clamping device that ensures sieves are held firmly without over-tightening and allows them to be quickly removed and replaced. The shaker is fitted with a timer which can be preset to any duration up to 60 minutes.

The PRSG-0413 sieve shaker has been specially designed to operate with heavy samples without loss of performance. It is equipped with a dynamic power source which ensures the right vibration is imparted to the sieves and sample for fast, accurate and reproducible tests. The vertical movement is fixed to ensure the sample spends maximum time on the sieve surface. The unique vibratory action also helps keep the apertures clear and free from binding.
Technical Specifications
Sieve Capacity 15 pieces of 200 mm (8â?�) sieves + pan and cover
10 pieces of 300 mm mm (12â?�) sieves + pan and cover
7 pieces of 400 mm (16â?�) sieves + pan and cover

Dimensions 650x650x400 mm
Weight (approx.) 147 kg
Power 370 W

Product Code Product Description

PRSG-0411 Sieve Shaker with Time Adjustment for 200/300 mm(8â?�/12â?�) Dia. Frame Sieves, 220-240 V 50-60 Hz

PRSG-0411/110 Sieve Shaker with Time Adjustment for 200/300 mm (8â?�/12â?�) Dia. Frame Sieves, 110 V 60 Hz

PRSG-0412 Sieve Shaker with Frequency and Time Adjustment, for 200/300mm (8â?�/12â?�) Dia. Frame Sieves, 220-240 V 50-60 Hz

PRSG-0412/110 Sieve Shaker with Frequency and Time Adjustment,for 200/300mm (8â?�/12â?�) Dia. Frame Sieves, 110 V 60 Hz

STANDARDS : EN 932-5; ISO 565, 3310-1, 3310-2; ASTM E11, 323; BS 410-1, 410-2

The PRSG-0411 and PRSG-0412 Sieve Shakers impart a circular motion to the material being sieved so that it makes a slow progression over the surface of the sieve.

They are equipped with a dynamic power source which ensures the right vibration is imparted to the sieves and sample for fast, accurate and reproducible tests. The vertical movement is fixed to ensure the sample spends maximum time on the sieve surface. The unique vibratory action also helps keep the apertures clear and free from binding.

The PARSROS Sieve Shakers are fitted with a very efficient clamping device that ensures sieves are held firmly without over-tightening and allows them to be quickly removed and replaced. The timer can be preset for any duration up to 60 minutes. The PRSG-0412 model has the additional frequency adjustment property.

Technical Specifications
Sieve Capacity 15 pieces of 200 (8â?�) mm sieves + pan and cover
10 pieces of 300 mm (12â?�) sieves + pan and cover

Dimensions 510x510x370 mm (for both models)

Weight (approx.) 86 kg (for both models)

Power 250 W (for both models)

Product Code Product Description

PRSG-0420 High Capacity Screen Shaker Time-Controlled, 220-240 V 50-60 Hz

PRSG-0420/110 High Capacity Screen Shaker Time-Controlled, 110 V 60 Hz

PRSG-0422 High Capacity Screen Shaker Frequency & Time-Controlled, 220-240 V 50-60 Hz
PRSG-0422/110 High Capacity Screen Shaker, Frequency and Time-Controlled, 110 V 60 Hz

PRSG-0425 Pan

PRSG-0426 Soundproof Safety Cabinet

STANDARDS : EN 1339, 1367-1; TS 2824
The PRSG-0420 and PRSG-0422 are ideal for sizing large quantities of crushed stones, sand, gravel, slag, coal, coke, ores, pellets and similar materials. The screen shaker has a capacity of approx. 30 kg of sample. To be use with 667x452x67 mm dimension screens. The shaker has 6 screens and 1 pan capacity.
PRSG-0420 model is time-controlled, PRSG-0422 model is frequency and time-controlled.
Various sized wowen wired from 100 mm (4â?�) to 4 mm (no.5) or perforated plate from125mm to 5.6mm screen trays are available on request.
PRSG-0426 Soundproof Safety Cabinet is manufactured from sheet steel lined internally with soundproofing material to reduce noise and for protection from dust.
Screen trays and Soundproof Safety Cabinet (PRSG-0426) should be ordered separately.
The PRSG-0420 or PRSG-0422 is supplied complete with;
â?¢ Pan (PRSG-0425)

Woven Wire Cloth Screen Trays ASTM E11 Perforated Plate Screen Trays
Product Code Aperture mm (in) Product Code Aperture mm (in)
PRSG-8WC1000 100 mm (4 in) PRSG -8PC0056 5.6
PRSG-8WC0900 90 mm (3 ½ in) PRSG -8PC0080 8
PRSG-8WC0750 75 mm (3 in) PRSG -8PC0112 11.2
PRSG-8WC0630 50 mm (2 in) PRSG -8PC0160 16
PRSG-8WC0500 45 mm (1 ¾ in) PRSG -8PC0224 22.4
PRSG-8WC0450 37.5 mm (1 ½ in) PRSG -8PC0315 31.5
PRSG-8WC0375 31.5 mm (1 ¼ in) PRSG -8PC0450 45
PRSG -8WC0315 25 mm (1 in) PRSG -8PC0630 63
PRSG -8WC0250 22.4 mm (7/8 in) PRSG -8PC1250 90
PRSG -8WC0190 19 mm (¾ in) 125
PRSG -8WC0160 16 mm (5/8 in)
PRSG -8WC0125 12.5 mm (½ in)
PRSG -8WC0112 11.2 mm (7/16 in)
PRSG -8WC0095 9.5 mm (3/8 in)
PRSG -8WC0080 8 mm (5/16 in)
PRSG -8WC0063 6.3 mm (¼ in)
PRSG -8WC0056 5.6 mm (No. 3 ½ in)
PRSG -8WC0047 4.75 mm (No. 4 in)
PRSG -8WC0040 4 mm (No. 5 in)

SCREEN SHAKER
Dimension 587x787x850 mm
Weight (approx.) 170 kg
Power 550 W

SCREEN TRAYS
Dimensions 667x452x67 mm
Weight (approx.) 7 kg

Product Code Product Description

PRSD-1450 Muffle Furnace 3 lt. 1000°C, 220-240 V 50-60 Hz

PRSD-1455 Muffle Furnace 6 lt. 1100°C, 220-240 V 50-60 Hz

PRSD-1460 Muffle Furnace 5 lt. 1200°C, 220-240 V 50-60 Hz

PRSD-1462 Muffle Furnace 5 lt. 1200°C Programmable Timer, 220-240 V 50-60 Hz

PRSD-1465 Muffle Furnace 5 lt. 1600°C, 380 V 50 Hz

The PRSD Series Muffle Furnaces are widely used for determining various properties of construction materials, and they cover a temperature range from 1100°C to 1600°C, they are all front loading for easy operation and are of a double skin construction to maintain a cool outer case. Up to 1300°C, open wire based models are also produced.

Excellent temperature control is provided by a PID digital control system. A vertical counter balanced door keeps the hot insulation away from the operator which opens in an upward movement. The Furnace has a safety switch which isolates the power when the door is opened.

Laminar Flows

Product Code Product Description

PRS-KU1480 Laminar Flow (Fume Hood) Over the Counter Type

PRS-KU1482 Laminar Flow (Fume Hood) - Cabinet Type

STANDARDS

Some tests, especially extraction methods, require the use of volatile toxic chemicals which are hazardous to health, and these gases are subject to occupational exposure limits as described in relevant legislation and regulations

The PRS-KU1480 and PRS-KU1482 , Over The Counter and Cabinet Type Fume Hoods are especially designed to remove toxic gases from the test area. Bespoke Fume Hoods with specific dimensions and properties can be supplied to meet specific requirements, pleasecontact PARSROS for more information.

Standard Features

Stoneware Bench

Water and gas fittings

2 x double Electric Socket, 220 V

Galvanized frame

Legs that made from hard PVC to be protected against corrosion,

Second air drained part for draining heavy gases,

Standard flammable gas tap for LPG, Acetylene, Propane, Butaneâ?¦etc,

Pressure Reducing Regulator,

Laminated or Tampered glass

Optional Features

Digital Indicator and control panel ,

Fan min. 1200 m3/h capacity

Trespa Top Lab Plus or Epoxy Resin type bench surface,

Demineralized water fitting

Product Code Dimensions Weigth(approx.)

PRS-KU1480 1500x900x1620 mm 250 kg

PRS-KU1482 1500x900x2350 mm 300 kg

Digital Balances

Product Code Product Description

PRSW-0633 Digital Balance 600 g x 0.01 g

PRSW-0635 Digital Balance 6 kg x 0.1 g

PRSW-0637 Digital Balance 30 kg x 5 g

PRSW-0638 Digital Balance 30 kg x 0.5 g

PRSW-0640 Digital Balance 3000 g x 0.01 g

PRSW-0642 Digital Balance 3500 g x 0.01 g

PRSW-0643 Dijital Terazi 4500 g x 0.01 g

PRSW-0645 Digital Balance 15 kg x 0.2 g

PRSW-0648 Digital Balance 30 kg x 0.1 g

PRSW-0654 Digital Balance 60 kg x 1 g







The PARSROS Series Digital Balances provide a wide range of maximum capacity and readability characteristics which make them economical and easy to use, they are ideal for central and site laboratories who require a range of balances for various applications.

The PARSROS Series Digital Balances are fitted with strain gauge load cells and are designed with large backlit LCD displays that give precise measurements within the 0°C to 40°C temperature range. Digital Balances have an internal automatic calibration feature. All models can be connected to printers or PC's through their RS 232 outputs and are supplied with 220-240 V, 50-60 Hz AC/DC adapters.


Product Code Capacity Readability Pan Size Power Supply

PRSW-0633 600 g 0.01 g Ã? 116 mm AC Battery

PRSW-0635 6 kg 0.1 g 300x230 mm Rechargeable Batt.

PRSW-0637 30 kg 5 g 300x230 mm Reachargeable Batt.

PRSW-0638 30 kg 0.5 g 300x230 mm Reachargeable Batt.

PRSW-0640 3000 g 0.01 g 125x145 mm Reachargeable Batt.

PRSW-0642 3500 g 0.01 g 300x230 mm Electrical

PRSW-0643 4500 g 0.01 g 195x195 mm Electrical

PRSW-0645 6000 g 0.01 g 195x195 mm Electrical

PRSW-0648 15 kg 0.2 g 300x230 mm Reachargeable Batt.

PRSW-0654 30 kg 0.1 g 310x220 mm Reachargeable Batt.

Digital Hot Plates

Product Code Product Description

PRSD-1400 Digital Hot Plate 300x300 mm, 220-240 V 50-60 Hz

PRSD-1402 Digital Hot Plate 350x450 mm, 220-240 V 50-60 Hz

PRSD-1403 Digital Hot Plate 400x600 mm, 220-240 V 50-60 Hz

PRSD-1405 Hot Plate Ã? 170 mm 220-240 V 50-60 Hz

PRSD-1410 Digital Hot Plate with Magnetic Stirrer 220-240 V 50-60 Hz


Product Code PRSD-1400 PRSD-1402 PRSD-1403

Temperature Range Ambient to 350OC

Control System Digital Thermostat

Temperature Sensivity ± 2 OC

Plate Dimensions 300x300 mm 300x450 mm 400x600 mm

External Chamber Electrostatic Powder Paint, Steel


Product Code PRSD-1405

Plate Dimensions Ã? 170 mm

Hot Plate Type Sanding Plate

External Chamber Electrostatic Powder Paint, Steel

Product Code PRSD-1410

Temperature Range Ambient to 300OC

Stirring Speed 100-2000 r.p.m.

Stirring Capacity 5000 ml

Plate Dimensions 190x190 mm

External Chamber Electrostatic Powder Paint, Steel

Product Code Dimension Weight (approx.) Power

PRSD-1400 300x300x250 mm 3.5 kg 1200 W

PRSD-1402 350x450x250 mm 5.5 kg 1800 W

PRSD-1403 400x600x250 mm 7.5 kg 3000 W

PRSD-1405 300x300x200 mm 2.5 kg 1500 W

PRSD-1410 210x310x100 mm 2.8 kg 600 W

Air Contents

Product Code Product Description

PRS-B0650 Air Entrainment Meter

PRS-B0652 Manometer for PRS-B0650

PRS-B0408 Tamping Rod Ã?16x600 mm

PRS-0714 Straight Edge 300x30x3 mm


STANDARDS : EN 12350â??7; ASTM C231; AASHTO T152

PRS-B0650 Air Entrainment Meter is used to determine the air content of fresh concrete. It consists of a flanged 7 liter capacity cylindrical vessel and cover assembly incorporating a large (90 mm dia.) pressure gauge, air pump and valves. It has a quick action clamping system.

Direct pressure gauge reading to the nearest 0.1% up to 6% and 0.2% from 6 to 10%. It is not affected by changes in barometric pressure.

The meter measures up to 22% of entrained air. It is appropriate for aggregates size of maximum 63 mm.

The Air Entrainment Meter is supplied complete with;

â?¢ Straight Edge

â?¢ Tamping Rod

â?¢ Wash Bottle. 250cc J-Type pipe and an inner extension pipe for calibration
â?¢ Special Carrying Case

Capacity 7 litres

Air Content Range 0-10%

Graduations 0.1% up to 6&; 0.2% from 6 to %10

Dimensions 300x310x620 mm

Weight (approx.) 16 kg

Automatic Grinding Machine

Product Code Product Description
PRS-1040 Automatic Grinding Machine, 220-240 V 50-60 Hz

PRS-1042 Grinding Wheel PRS-1035 and PRS-1040

PRS-1043 Cradle for Ã?:38-100 mm Cylindrical Specimens

PRS-1044 Water Restraint Panel Set

PRS-1048 Water Restraint Panel for dia 160mm Cylinder Specimen

Product Code Product Description

PRS-1035 Semi-Automatic Grinding Machine, 220-240 V 50-60 Hz

PRS-1042 Grinding Wheel for PRS-1035 and PRS-1040

PRS-1043 Cradle for Ã?:38-100 mm Cylindrical Specimens

PRS-1044 Water Restraint Panel Set

PRS-1048 Water Restraint Panel for Ã?160mm Cylinder Specimen

The PRS-1035 Semi-Automatic Grinding Machine provides fast grinding of cylinder specimen ends to obtain plane and parallel surfaces according to EN and ASTM standards.

The ony differance between automatic machine and semi-automatic machie is that the cradle of the semi-automatic machine is moved toward the grinding wheel by user. All grinding process is automatic except the movement of the cradle for semi-automatic machine. The optimum cycle to be applied by user is 5-6 cycle/per minute.

The machine is manufactured from stainless steel for resistance to corrosion. The water restraint panels should be ordered seperately for cubic specimens or different sized cylindrical specimens.


The Semi-Automatic Grinding Machine is supplied complete with;

The preparation of concrete cylinder test specimen for compressive strength test EN 12390-1, 12390-3 ASTM C31, C39, C192, C617

The maximum tolerance on the flatness of the potential load bearing surfaces (the ends of compression test specimens) is 0.002 in. [0.050 mm]

The preparation of drilled concrete cores specimen for compressive strength test EN 12504-1, 12390-1, 12390-3 ASTM C42, C397

The deviation of perpendicularity of the side, with reference to O the end faces is 0,5O

â?¢ Grinding Wheel for concrete specimens

â?¢ Cradle for Ã?:38mm to100 mm cylindrical specimens

â?¢ Water restraint panel set f (Consist of four panels Ã?150, 100, 75 and 50 mm)

Dimensions 730x1200x1500 mm

Weight (approx.) 280 kg

Power 1850 W

Product Code Product Description

PRS-B1010 Universal Cutting Machine Small, 380 V

PRS-B1020 Universal Cutting Machine Junior, 380 V

PRS-B1030 Universal Cutting Machine Major, 380 V

PRS-B1012 Cutting Blade Ã? 350 mm

PRS-B1022 Cutting Blade Ã? 450 mm

PRS-B1032 Cutting Blade Ã? 600 mm

The PARSROS Series Universal Cutting Machines have been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. It is available in three different models.

Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with â??Vâ?? block clamp for Ã? 100 mm specimens and a water circulation pump.

If 220 V is requiered please mension at time of order.

Cutting Blade should be ordered separately.

Product Code Product Description

PRSâ??A0600 Los Angeles Abrasion Machine (60 Hz version is available upon request)

PRSâ??A0600/110 Los Angeles Abrasion Machine 110 V 60 Hz

PRSâ??A0601 Los Angeles Abrasion Machine with Soundproof Safety Cabinet 220-240 V 50Hz

PRSâ??A0601/110 Los Angeles Abrasion Machine with Soundproof Safety Cabinet, 110 V 60 Hz

PRSâ??A0602/E Los Angeles Abrasion Charges EN,12 pcs.

PRSâ??A0602/A Los Angeles Abrasion Charges ASTM/AASHTO, 12 pcs.

PRSâ??A0605 Soundproof Safety Cabinet for Los Angeles Abrasion Machine

The Los Angeles Abrasion Machine is used for determination of the aggregates resistance to fragmentation. The machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. The drum is rotated at a speed of 31-33 r.p.m. The internal shelf provided with the machine confirms to ASTM, AASHTO and EN standards.

The machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. The drum is equipped with an interlock device which allows the operator to lock the drum into position for easy loading/unloading of the sample.

A steel tray is supplied with the machine for easy discharge of specimen and abrasive charges.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives.

The Los Angeles Abrasion Machine is supplied complete with;
â?¢ Steel Tray

Product Code Product Description

PRS-A0620 Micro-Deval Apparatus, 220-240 V 50 Hz (60 Hz version is available upon request)

PRS-A0620/110 Micro-Deval Apparatus, 110 V 60 Hz

PRS-A0621 Stainless Steel Drum Ã? 200x154 mm EN 1097-1

PRS-A0622 Stainless Steel Drum Ã? 200x400 mm EN 13450

PRS-A0623 Micro-Deval Abrasion Charges Ã?10 mm 25 kg Pack, EN 1097-1

The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel cylinders, and 25 kg of 10 mm diameter stainless steel spheres and an automatic digital counter which allows machine to stop automatically at the preset number of revolutions.
Stainless steel drums are rotating at a speed of 100 ± 5 r.p.m.

The machine can accept up to 4 pcs. Ã? 200x154 mm drums or 2 pcs. Ã? 200x400 mm drums.

Ã? 200x400 mm steel drums and 1,6 mm sieve should be ordered separately.

The Micro-Deval Apparatus is supplied complete with;

â?¢ Stainless Steel Drum, Ã? 200x154 mm, 2 pcs.

â?¢ Abrasion Charges, 25 kg, Ã? 10mm

Dimensions 1100x400x1000 mm

Weight (approx.) 140 kg

Power 750 W

PRS-EU8050 Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.


PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

PRSM-4000 Hydraulic Universal Testing Machine,600 kN, 220-240V

PRSM-4000/110 Hydraulic Universal Testing Machine, 600 kN, 110V

PRSM-4001 Frame for 600 kN Hydraulic Universal Testing Machine

PRSM-4002 Hydraulic Grips Jaw Faces Set for Round Specimens

PRSM-4003 Hydraulic Grips Jaw Faces Set for Flat Specimens

PRSM-0500 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),

PRSM-0510 Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)

PRSM-0520 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)

PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.

Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.

Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.

PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.

The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.

Product Code Product Description

RYT-4220 Plate Bearing Test Set 200 kN Capacity

RYT-4222 Plate Bearing Test Set 500 kN Capacity


Plate Bearing Test Set is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport and highway pavements. A wide range of plate bearing test equipment are available, together with many accessories according to the different Standards and specific enduser needs. All test sets supplied complete with 1,5 m long flexiable hose with quick release coupling.


The RYT-4220 Plate Bearing Test Set 200 kN is supplied complete with:

Dimensions 650x350x600 mm

Weight 130 kg

â?¢ 200 kN Capacity Piston Assemly

â?¢ Hydraulic Hand Pump,

â?¢ Pressure Transducer,

â?¢ Datum Bar - 2.4 m long , 3 pcs.

â?¢ 25 mm travel x 0.01 mm digital dial gauges with dial supports,

â?¢ 300 mm and 450 mm dia. loading plates,

The RYT-4222 Plate Bearing Test Set 500 kN is supplied complete with:

â?¢ 500 kN Capacity Piston Assemly
â?¢ Hydraulic Hand Pump,
â?¢ Pressure Transducer,
â?¢ Datum Bar - 2.4 m long , 3 pcs.
â?¢ 25 mm travel x 0.01 mm digital dial gauges with dial supports,
â?¢ 600 mm and 760 mm dia. loading plates

Product Code Product Description

PRS-ZE0860 Automatic CBR Test Machine, 220-240 V 50-60 Hz

PRS-ZE0860/110 Automatic Digital CBR Test Machine, 110 V 60 Hz

The PRS-ZE0860 Automatic CBR Test Machine is designed for performing laboratory evaluation of the CBR value of highway sub-bases and sub-grade, and determination of the strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?�).

The PRS-ZE0860 is composed of a robust and compact two column frame with adjustable upper crossbeam driven by an electromechanical ram with a maximum capacity of 50 kN and a data acquisition and processing system.

The PRS-ZE0860 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals. The ram speed can be set between 0.5 mm/min to 5 mm/min by using the Digital Readout Unit. This main feature allows the user to perform tests complying to BS, EN, ASTM or AASHTO standards with the same machine.

Rapid adjustment of the platen is also provided by up and down buttons which are located on the front panel of the machine. The PRS-ZE0860 is supplied complete with a 50 kN load cell, penetration piston, linear potentiometric displacement transducer (25 mm x 0.001 mm), computer software and connection cable. PC is optional.

The CBR Test Machine is supplied complete with;
â?¢ Load Cell, 50 kN
â?¢ Penetration Piston
â?¢ Linear Potentiometric Displacement Transducer with Connection Part, 25x0.001 mm
â?¢ Computer Software
â?¢ Connection Cable

Product Code Product Description

PRS-ZE0852 CBR Test Machine with Load Ring, 50 kN capacity, 220-240 V 50-60 Hz

PRS-ZE0852/110 CBR Test Machine with Load Ring, 50 kN capacity, 110 V 60 Hz

STANDARDS

NF P94-078; UNI CNR 10009

The PRS-ZE0852 is designed for performing laboratory evaluation of the CBR value of highway sub bases and subgrade and for the determination of strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?�).

The PRS-ZE0852 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals.

The machine is designed to be mounted on a suitable bench and comprises of a robust and compact two column frame with adjustable upper cross beam. The frame has 50 kN capacity.

Two test speeds are provided 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO tests. This main feature allows the user to perform tests complying to BS or ASTM/EN/AASHTO standards with the same machine. Loading and unloading are down from the front panel by UP/DOWN buttons. Unloading speed is udjusted 5 mm/min for easy re-testing.


The CBR Test Machine is supplied complete with;
â?¢ Load Ring, 50 kN
â?¢ Digital Gauge with Connection Part, 25x0.01 mm
â?¢ Penetration Piston

Product Code Product Description

PRS-ZE0095 Dynamic Cone Penetrometer (DCP)

STANDARDS :

The PRS-ZE0095 Dynamic Cone Penetrometer is used for the rapid, in situ measurement of structural properties of existing road pavement constructed with unbound materials.

it incorporates an 8 kg weight dropping through a height of 575 mm and 60° cone having a diameter of 20 mm. with the standard DCP measurements can be made down to a depth of approximately 850 mm or when extension shafts are used to a recommended maximum depth of 2 m.

Readings are usually taken after a set number of blows, changing the number according to the strength of the layer being penetrated. A typical test takes only a few minutes, therefore the instrument provides a very efficient method of obtaining information that would normally require the digging of test pits.

The penetration hammer assembly consists of 8 kg hammer, hammer shaft, anvil with plastic plate coupling for ruler and handle.

The Dynamic Cone Penetrometer is supplied complete with;
â?¢ A hammer assembly,
â?¢ Penetration rod,
� 2 piece 60° cone,
â?¢ Metal plate coupling for ruler,
â?¢ Segmented adaptor for extension rods,
â?¢ Segmented upper extension rod,
â?¢ Segmented lower extension rod,
â?¢ 2 piece 13-17mm AF spanners,
â?¢ 3mm AF hex wrench,
â?¢ Tommy bar,
â?¢ A bottle of adhesive,10cc,
â?¢ Users Manual
â?¢ Steel ruler,
â?¢ Carrying Case, heavy-duty wooden

Product Code Product Description

PRS-A0700 Bulk Density Measure 1 lt.

PRS-A0705 Bulk Density Measure 5 lt.

PRS-A0610 Bulk Density Measure 10 lt.

PRS-A0720 Bulk Density Measure 20 lt.


The Bulk Density Measures are manufactured from heavy duty steel complying with the related standard. Available in 1, 5, 10 and 20 lt capacity models to comply with the relevant standards. The measures are coated against corrosion.

Product Code Product Description

PRS-A0806 Microlance Instant Moisture and Temperature Tester

PRS-A0806 MICROLANCE Instant Moisture and Temperature Tester is used for the instant on-site determination of moisture and temperature of sands, aggregates, building materials, minerals and mixes from small quantities to hundreds of tons.

The instrument is reliable and easy to use, taking moisture readings up to 1 meter depth by simply inserting the lance into the test material. Instant readings are monitored on the digital display and the built-in computer allows the user to monitor a wide range of materials and water contents.

PRS-A0806 Microlance is supplied with standard calibration values for sands and aggregates but it can also be calibrated for different material or mixture with the Autocal functionality. The unit is supplied complete with a calibration certificate.

Range Resolution Accuracy
Moisture 0 to 25 % 0.1 % better than 0.5 %
Tempature -20 to 60°C 0.1 °C better than 0.5 °C

â?¢ Moisture measurement with temperature compensated electric field
â?¢ Temperature measurement according to BS 1904 and DIN 751
â?¢ Platinum resistance detector
â?¢ Works with 4 x 1.5 V AA cells (or equivalent)

Dimensions 100x100x1200 mm

Weight (approx.) 2 kg

Automatic Marshall Impact Compactor TS EN

Product Code Product Description

PRS-AS0082/E Automatic Marshall Impact Compactor with Wooden Pedestal, EN, 220-240 V 50 Hz, (60 Hz version is available upon request)

PRS-AS0082/E-S Automatic Marshall Impact Compactor with Wooden Pedestal and Soundproof Safety Cabinet, EN, 220-240 V 50 Hz

PRS-AS0067 Marshall Steel Block, Ã?102 and 50 mm height


The PRS-AS0082/E Automatic Marshall Compactor with wooden pedestal provides a uniform and even degree of compaction. The unit incorporates a compaction pedestal, comprising a laminated hardwood block secured to a concrete block by a 300 mm square x 25 mm thick steel plate. The mechanism lifts the 4535 g ± 15 g hammer and automatically releases it at the specified height of 457 ± 5 mm.

The conveniently positioned control panel comprises of start/stop button, emergency stop button and a direct reading counter used to set the required number of blows. The apparatus stops automatically after the preset number of blows. The automatic Marshall compactor includes the laminate hardwood block and concrete block 450x450x200 mm.

The PRS-AS0082/E is equipped with a motorized mould fixing mechanism which also raises the hammer to provide easy removing of the mould. With this feature, the user can easily release the mould and raise the rammer simultaneously.Particular attention has been paid to operator safety by the inclusion of various in-built safety features.

PRS-AS0067 Marshall Steel Block is used for Initial heating of the foot of compaction hammer and Marshall mouds should be order separately.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives

Product Code Product Description

PRS-AS0070 Manual Marshall Compaction Assembly, 4â?�, ASTM

PRS-AS0071 Marshall Compaction Hammer, 4â?� ASTM for PRS-AS0070

PRS-AS0072 Wooden Compation Pedestal, ASTM, for PRS-AS0070 and PRS-AS0076

PRS-AS0074 Marshall Compaction Hammer BS

PRS-AS0076 Manual Marshall Compaction Assembly, 6â?�, ASTM

PRS-AS0077 Marshall Compaction Hammer, 6â?�ASTM, for PRS-AS0076

PRS-AS0070 Marshall Steel Block, Ã?102 mm dia. and 50 mm height,

PRS-AS0071 Marshall Steel Block, Ã?154mm dia. and 50 mm height,

STANDARDS :

The PRS-AS0070 and PRS-AS0076 Marshall Manual Assemblies are used to prepare Marshall specimens manually.
The Compaction Assemblies consist of a Marshall Compaction Hammer and a Wooden Compaction Pedestal. The Pedestal supplied complete with steel plate, mould holder and hammer guide.
PRS-AS0067 and PRS-AS0068 Marshall Steel Blocks are used for initial heating of the foot of compaction hammer should be ordered separately.
The Manual Marshall Compaction Assemblie are supplied complete with;
â?¢ Wooden Compaction Pedestal
â?¢ Hammer

Product Code Dimensions Weight (approx.)

PRS-AS0070 350x400x1600 mm 50 kg

PRS-AS0071 100x100x108 mm 8 kg

PRS-AS0072 350 x400x1600 mm 42 kg

PRS-AS0074 100x100x108 mm 8 kg

PRS-AS0076 350x400x1600 mm 57 kg

PRS-AS0077 100x100x108 mm 14 kg

PRS-AS0067 110x110x60mm 3,5 kg

PRS-AS0068 160x160x60 mm 7,5 kg

Product Code Product Description

PRS-AS0013 Reflux Extraction Test Set 1000 g, 220-240 V 50-60 Hz

PRS-AS0014 Reflux Extractor Jar 1000 g

PRS-AS0015 Reflux Extractor Condenser 1000 g

PRS-AS0016 Reflux Extractor Conical Wire Screen 500 g

PRSGH-1830 Iron Wire Gauze 120x120mm

PRS-AS0020 Reflux Extraction Test Set 4000 g, 220-240 V 50-60 Hz

PRS-AS0021 Reflux Extractor Jar 4000 g

PRS-AS0022 Reflux Extractor Condenser 4000 g

PRS-AS0023 Reflux Extractor Conical Wire Screen 2000 g

PRS-AS0024 Filter Paper Ã? 400 mm (50 pcs./pack) for PRS-AS0013 and PRS-AS0020

PRSGH-1835 Iron Wire Gauze 160x160mm

STANDARDS : ASTM D2172; AASHTO T164 B

The Reflux Extractor is used for the quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples. The bitumen content is calculated by difference from the weight of extracted aggregates, moisture content and ash from an aliquot part of the extract.

The Reflux Extraction Test Set is supplied complete with;
â?¢ Cylindrical Glass Extractor Jar
â?¢ Two Wire Mesh Cones with Interlocking Frames
â?¢ Water Condenser with Inlet/Outlet Tubes
â?¢ Filter Paper, 50 pcs./pack
â?¢ Hot Plate
â?¢ Iron Wire Gauze (PRSGH-1830 with PRS-AS0013 , PRSGH-1835 with PRS-AS0020)

Dimensions

PRS-AS0013 260x260x620 mm

PRS-AS0020 260x260x620 mm

Weight (approx.)

PRS-AS0013 6 kg

PRS-AS0020 8 kg

Manual Softening Point Apparatus (Ring and Ball Test Sets )

Product Code Product Description

PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz

PRS-AS0130/110 Ring and Ball Test Set, 110 V 60 Hz

PRSTD-1410 Hot Plate with Magnetic Stirrer

PRS-AS0131 Brass Ring, with Steel Ball and Ball Centering Guides, 2 pcs.each

PRS-AS0132 Ring Holder and Assembly

PRSGG-1330 Borosilicate Glass Beaker 600 ml

PRSGT-1305 Glass Thermometer Max. 110°C

PRSGT-1315 Glass Thermometer Max. 250°C

PRSGT-2050 ASTM 15C Thermometer -2 +80°C (IP 6OC)

PRSGT-2055 ASTM 16C Thermometer +30 + 200°C (IP 61C)

STANDARDS : EN 1427; ASTM D36; AASHTO T53

PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz The PRS-AS0130 Ring and Ball Test Set is used for determining the softening point of bituminous materials by ring and ball method.

If required, Glass Thermometer PRSGT-1305, PRSGT-1315, ASTM 15C or 16C Thermometer should be ordered separately.

The Ring and Ball Test Set is supplied complete with;

â?¢ Hot Plate with Magnetic Stirrer
â?¢ Brass Rings, 2 pcs.
â?¢ Ball Centering Guides, 2 pcs.
â?¢ Thermometer, Temperature Sensor with Holder
â?¢ Steel Balls, 9.5 mm dia., 2 pcs.
â?¢ Ring Holder and Assembly
â?¢ Borasilicate Glass Vessel Beaker 600ml

Dimensions 280x400x200 mm (packed)

Weight (approx.) 4 kg

Power 650 W

Product Code Product Description

PRS-AS0630 Vibratory Compactor Set, 220-240 V 50 Hz

PRS-AS0085 P.R.D. Split Mould and Base Plate

STANDARDS : EN 12697-32, 12697-9, 12697-10

The PRS-AS0630 Vibratory Compactor Set is used to prepare test specimens of bituminous mixtures by using the vibratory compaction technique.

The PRS-AS0630 Vibratory Compactor Set consists of a Vibrating Hammer (220-240 V 50 Hz), Supporting Frame, 102 mm dia. Small and 145 mm. dia. Large Tamping Foots and 300 mm Shank.

P.R.D. (Percentage Refusal Density) Split Mould is split verticially on one side, attached to the base plate with clamp. Plated against corrosion.

The split mould and base plate should be ordered separately.
The set is also used for compaction of proctor and CBR soil specimens.

The Vibratory Compactor Set is supplied complete with;
â?¢ Vibrating Hammer
â?¢ Supporting Frame
â?¢ Small Tamping Foot, 102 mm dia.
â?¢ Large Tamping Foot, 145 mm dia.
â?¢ Shank, 300 mm, long

Dimensions 510x300x1120 mm (complete set)

Weight (approx.) 75k (complete set)

Power 1150 W (vibrating hammer)

PRS-ASTH1322 Asphalt Mixer

STANDARDS : ASTM C109, C305 / AASHTO T106, T162 / EN 196-1, 196-3:2005, 413-2, 459-2, 480-

This 5 litre capacity mixer has been designed to mix bituminous samples for compaction tests and for other tests where uniformity is required. Thanks to the planetary action this mixer ensures a complete and uniform mixing. The machine is provided with a variable speed drive allowing to set different speeds.
The plastic cover can be lifted to inspect the boxl, and in this case the motor automatically turns off to prevent accidents to CE safety Directive.

The mixer is supplied complete with hook beater and stainless steel bowl, but without the insomantle electric heater that must be ordered separately.

Dimensions 260 x 760 x 860 mm

Power supply 400 V 50 Hz 3 ph 0,5 HP (230V 1 ph on request )
Weight 160 Kg

Product Code Product Description

PRS-ASVP00127 Vakuum Pyknometer

STANDARDS : EN 12697-5,EN 13108,ASTM D2041,AASTHO T209,T283

Transparent plexiglass made, complete with valve and gauge.
it is used for a rapid determination of asphalt content, bulk specific gravity of aggregates.
The max. theoretic specific gravity of bituminous uncompacted road mixtures and the percent air voids in compacted mixtures.

Dimensions dia. 300x450 mm
Weight 10 Kg

Product Code Product Description

PRS-ASFP00129 Asphalt Flash Point Apparatus

STANDARDS : BS 4689, ASTM D92, AASHTO T48, UNI4160, IP 36/67, UNE 7075, EN 22592, NFT60-118, CNR N0 72

It is used to determine the â??open-cupâ?�, flash and fire points of oil products with a flash point above 80°C.

Calibrated cup. Gas or liquid gas lighting device above the cup. 550 W electric thermostatic heater.

Power supply 220-240 V 1ph 50 Hz 550 W

Dimensions 220 x 220 x 450 (h) mm.

Weight 11 Kg

Product Code Product Description

PRS-CM6700 250 kN Cement Compression Frame

PRS-CM6710 15/250 kN Cement Flexure/Compression Frame

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349;BS 3892-1, 4551-1

The PRS-CM6700 and PRS-CM6710 , very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices.

Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be ordered separately.


Distance Pieces for Frame

Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens.
Distance Pieces

PRS-CM4630 Distance piece dia. 165 mm x 15 mm
PRS-CM4631 Distance piece dia. 165 mm x 30 mm
PRS-CM4633 Distance piece dia. 165 mm x 50 mm
PRS-CM4634 Distance piece dia. 165 mm x 90 mm

Platens

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished.

The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm.

Loading Cylinder Assembly & Limit Switch

All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity.
The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump.
There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.

Accessories

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

Product Code Product Description

PRS-CM0090 Jolting Table, EN, 220-240 V 50 Hz, (60 Hz version is available upon request)

PRS-CM0091 Jolting Table with Soundproof Safety Cabinet, EN, 220-240 V 50 Hz

PRS-CM0092 Three Gang Mould for 40x40x160 mm

PRS-CM0093 Feed Hopper 40x40x160 mm for PRS-CM0092

PRS-CM0094 Short and Long Spreaders and Straightedge, for PRS-CM0092

STANDARDS : EN 196-1; ISO 679
Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height is 15 mm conforming to EN 196-1. The machine is equipped with a counter which provides automatic shut off at end of preset drop numbers.

Weight and dimensions of the jolting table fully comply with the requirements of EN 196-1 standard. When used with PRS-CM0092 Three Gang Mould and PRS-CM0093 Feed Hopper, the total weight of the moving part is 20 kg ± 0.5 kg. Without PRS-CM0092 and PRS-CM0093 the weight of the moving parts is 6.85 kg. Rapid mould lock and release system allows easy and quick operation.

The supporting frame of the machine has been designed to ensure precise dimensions, table flatness, correct centering of the three gang mould on the table.

The motor and gearbox assembly is enclosed in a protective housing, which promotes user safety (the moving parts are inaccessible) and long life for the gearbox.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives.

PRS-CM0093 Feed Hopper is used for filling PRS-CM0092 Three Gang Moulds placed on the Jolting Table.

PRS-CM0092 Three Gang Mould, PRS-CM0093 Feed Hopper, PRS-CM0094 Short and Long Spreaders and Straightedge should be ordered separately.

Product Code PRS-CM0090 PRS-CM0091

Dimensions 1050x350x500 mm 1440Ã?500Ã?575 mm

Weight (approx.) 55 kg 125 kg

Motor Speed 60 r.p.m

Drop Height 15 mm

Power 250 W

Product Code Product Description

PRS-CM0098 Vibrating Machine for 70.7 mm Cube Moulds, BS, 220-240 V 50 Hz

STANDARDS : BS 4550

The PRS-CM0098 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens.

The mould table is mounted on four springs attached to an eccentric shaft which allows each sample to be vibrated at 12000 cycles per minute. There is a timer on it to preset time and it stops automatically in every 120 seconds.

60 Hz version should be mentioned on order if required.
70.7 mm cube mould (PRS-CM0096) should be ordered separately.

Dimensions 450x650x850 mm

Weight (approx.) 80 kg

Eccentric Shaft Rotation 12000 r.p.m

Power 1100 W

Product Code Product Description

PRS-CM0040 Blaine Air Permeability Apparatus

PRS-CM0041 U Manometer Tube

PRS-CM0042 Manometer Liquid 250 ml

PRS-CM0043 Cell with Perforated Disc and Plunger

PRS-CM0044 Filter Paper 100 pcs.

PRS-CM0045 Filter Paper 1000 pcs.

PRS-CM0046 Reference Cement 5 g, ASTM

STANDARDS : EN 196-6; ASTM C204; AASHTO T153

The PRS-CM0040 Blaine Air Permeability Apparatus is used to determine the fineness of Portland cement, limes and similar powders expressed in terms of their specific surface. The apparatus is supplied complete with a U manometer tube, manometer liquid, glass connection parts, test stand, rubber aspirator, cell with perforated disc and plunger, plastic funnel and 100 pieces of filter paper.

PRS-CM0046 Reference Cement should be ordered separately.

The Blaine Air Permeability Apparatus is supplied complete with;
â?¢ U Manometer Tube
â?¢ Manometer Liquid, 250 ml
â?¢ Test Stand
â?¢ Rubber Aspirator
â?¢ Cell with Perforated Disc and Plunger Plastic Funnel
â?¢ Filter Paper, 100 pcs.

Dimensions 300x540x210 mm (packed)

Weight (approx.) 7 kg (packed)

Product Code Product Description

PRS-CM0029 Three Gang Shrinkage Mould 40x40x160 mm, EN

PRS-CM0030 Steel Insert 40x40x160 mm for PRS-CM0029, 18 pieces/pack

PRS-CM0031 Reference Rod 160 mm Long with Convex Hemispherical End

PRS-CM0032 Tamper, Hardwood 38x15x200mm, 250 g, EN

PRS-CM0033 Two Gang Shrinkage Mould 25x25x285 mm, ASTM

PRS-CM0034 Steel Insert 25x25x285 mm for PRS-CM0033, 12 pieces/pack

PRS-CM0035 Reference Rod 295 mm Long with Convex Hemispherical End

STANDARDS : ASTM C151, C157, C452, C490, C596; EN 12617-4

The PRS-CM0029 , PRS-CM0033 Three and Two Gang Shrinkage Moulds are used for the determination of linear shrinkage/expansion of cement mortar when used together with the PARSROS Length Comparator (PRS-CM0037 or PRS-CM0038 ).
Reference Rod should be ordered separately.

Product Code PRS-CM0029 PRS-CM0033

Dimensions 300x190x70 mm 90x340x40 mm

Weight (approx.) 12 kg 4 kg

Product Code Product Description

PRS-CM0074 Cement Wet Sieving Apparatus

STANDARDS : EN 451-2

The PRS-CM0074 Wet Sieving Apparatus is used for determining the fineness of fly ash. The apparatus comprises of a special stainless steel sieve, 0.045 mm opening, a spray nozzle Ã? 17.5 mm with 17 holes Ã? 0.5 mm oriented and spaced to conform to the standards.

Supplied complete with a pressure gauge Ã? 80 mm and fittings for connection to the water supply.

Dimensions 250x150x150 mm
Weight (approx.) 2 kg

Product Code Product Description

PRS-CETLS025 Lever Support

STANDARDS : EN 13294,TS EN 1015-9
Lever supported(Drill-Holder Type)
It is complete with washer and penetration rod brass made, clamp and locking support.
The machine is used for the determination of processing and rectifying of fresh mortarâ??s duration.
Dimensions 380 x 300 x (h)500 mm
Weight (approx.) 12 kg

Product Code Product Description

PRS-CMTC03 Mortar Permeability Tester ( 3 Unit )


This method of test covers the procedure for determining the permeability to water of the pozzolana mortar prepared and cured under specified conditions, by measuring the percolation of water through Standard cylindrical specimens.

The permeability unit shall consist of a specimen container ring of 100 mm diameter and 50 mm high, held between a bottom plate and a water cell. The hydraulic head for testing shall be obtained by connecting the unit to a compressor through a water pressure vessel.

A pressure regulator and pressure gauge shall be included between the compressor and the water pressure vessel to indicate the test pressure. Water percolating through the specimen shall be collected in a container.

Typical details of an individual unit are given in fig. 6 and 7. The water cell shall be 100 mm diameter brass cylinder and the top and bottom plates shall be either of brass or any other non-corroding metal. The connecting pipeline from the water cell to the water pressure vessel shall also be of non-corroding metal or of hard board polythene.

This requirement is necessary since the tests last over a number of days in which mild steel or similar materials will get corroded and the rust formed will coat the top of the specimens and affect the permeability. The connection of units to the air cylinder shall be done with armoured heawy-duty rubber hose.

Product Code Product Description

PRS-CM0073 Mud Balance

The PRS-CM0073 Mud Balance, an ideal equipment for site applications, provides an accurate and easy method for determining the mud density. The accuracy of the readings is not affected by the temperature of the drilling mud.

The equipment consists of a base and a graduated arm with an integral spirit level, counter weight, cup, lid, rider, knife-edge. Supplied with a special plastic carrying case which can be used to stabilize the equipment at the working position.

Dimensions 550x110x100 mm

Weight (approx.) 1 kg

Product Code Product Description

PRS-ZETBS Hand Auger Set

Hand auger equipment is extremely suitable for soil research. A comprehensive set for augering all types of soil down to a depth of 5 meters.

The set comprises 4 edelman augers of various types has one for each of them ; riverside auger ( 8 cm diam), auger for stony ground, spiral auger, suction auger, bailer, gouge auger with bent spatula and the normal handle and extension pieces.

Also they have a sounding device on efor each of them ; 5 meters measuring tape, a paire of gloves, nylon headed hammer, brush, shovel and complete in an hammock transport case (1150x150x300 mm) with zip fastener.

Product Code Product Description

PRS-ZE0965 Surface Soil Sampler (Core Cutter), 3â?� dia. ASTM

PRS-ZE0966 Spare Sampling Tube (Drive Cylinder), 3â?� (76.2 mm) x 70 mm high, ASTM, for PRS-ZE0965

PRS-ZE0967 Surface Soil Sampler (Core Cutter), 4â?� dia. ASTM

PRS-ZE0968 Spare Sampling Tube (Drive Cylinder), 4â?� (101.6 mm) x 127 mm high, ASTM, for PRS-ZE0967

PRS-ZE0970 Surface Soil Sampler (Core Cutter) Set, 100 mm dia., BS

PRS-ZE0975 Surface Soil Sampler (Core Cutter) Set, 150 mm dia., BS

STANDARDS : ASTM D2937; CNR No.22; BS 1377:9

Surface Soil Sampler (Core Cutter) is used to determine the insitu density of soil by taking a standard volume of soil sample from the ground which is then removed, trimmed and weighed.

The ASTM/CNR version, PRS-ZE0965 and PRS-ZE0967 Surface Soil Sampler (Core Cutter) consists of a drive head, 5 kg drive hammer and a thin wall sampling tube. 5 kg sliding weight drop hammer makes a free-fall on to the driving head which is placed on top of the sampling tube. Manufactured from steel and plated for corrosion resistance.

PRS-ZE0970 BS Type 100 mm Surface Soil Sampler (Core Cutter) Set consists of a driving dolly, 13,5 kg driving rammer and 100 mm dia. x 130 mm high core cutter. PRS-ZE0975 BS Type 150 mm Surface Soil Sampler (Core Cutter) Set BS consits of a driving dolly, 16 kg driving rammer and 150 mm diax 180 mm high core cutter.

Product Code Product Description

PRS-ZE0160 Soil Lathe / Trimmer and Extruder

PRS-ZE0162 Open Wire Saw

PRS-ZE0164 Wire Saw

PRS-ZE0166 Trimming Knife

PRSGG-2205 Porcelain Mortar with Pestle 130 mm dia

PRSGG-2215 Rubber Headed Pestle

The PRS-ZE0160 Soil Lathe, Trimmer and Extruder is used to extrude and trim soil samples from 35 mm to 100 mm diameter to reduce samples. It should be used together with PRS-ZE0162 Open Wire Saw.

Open Wire Saw, Wire Saw, Trimming Knife, Porcelain Mortar with Pestle. The Rubber Headed Pestle can be ordered separately.

Technical Specifications

Specimen Lathe 35x70 mm to 100x200 mm

SpecimenTrimming and Extrusion 35x70 mm to 50x100 mm

Vertical Daylight 260 mm

Dimensions 220x300x450 mm

Weight (approx.) 15 kg

Product Code Product Description

PRS-ZE0280 Ion Exchange Apparatus

PRS-ZE0282 Ion Exchange Resin 500 g.

STANDARDS : BS 1377:3

The PRS-ZE0280 Ion Exchange Apparatus when used together with PRS-ZE0282 Ion Exchange Resin, is used to determine the sulphate content of aqueous soil extracts and ground water.

The apparatus consists of an ion exchange column of 10 mm diameter and 400 mm long, swan-neck outlet and a 1500 ml round bottom flask to give a constant head. The apparatus is supplied assembled on a stand.

PRS-ZE0282 Ion Exchange Resin, 500 g should be ordered separately.

Product Code PRS-ZE0280 PRS-ZE0282

Dimensions 200x100x600 mm 100x100x100 mm

Weight (approx.) 5 kg 0,5 kg

Product Code Product Description

PRS-KA0580 Digital Point Load Tester

The PRS-KA0580 Digital Point Load Tester is used to determine the strength values of a rock specimen both in the field and in the laboratory.

It consists of a load frame for applying loads up to 56 KN, on which a manual hydraulic jack is mounted. The instrument accepts core specimens up to 4â?� (101,6 mm) diameter which are loaded by two coneshaped points.
A graduated scale indicates the distance between the conical points.

The applied load is measured by a high precision electric load cell with a digital display unit range 0-56kN proving:
- 65.000 divisions
- 0,001 kN resolution
- Linearity: 0,05%
- Hysteresis: 0,03%

Product Code Product Description

PRS-KA0570 Specimen Extruder for Hoek Triaxial Cells

PRS-KA0572 Extruder Adaptor Set for BX, NX and HQ Specimens

The PRS-KA0570 Specimen Extruder is used to extrude the rock sample from its jacket while avoiding to emptying the pressure fluid (confining oil) out of the Hoek Cell. It consists of a steel frame with a rack and pinion mechanism

The Specimen Extruder is supplied complete with;
â?¢ BX Type Adaptors
â?¢ NX Type Adaptors
â?¢ HQ Type Adaptors

Dimensions 470x220x200 mm

Weigth (approx.) 13 kg

Product Code Product Description

PRS-KA1010 Universal Cutting Machine Small, 380 V

PRS-KA1012 Cutting Blade Ã? 350 mm

STANDARDS : EN 12390â??3, 12504-1; ASTM C42, D4543

The PARSROS Series Universal Cutting Machines have been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens.

Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with â??Vâ?? block clamp for Ã? 100 mm specimens and a water circulation pump.

If 220 V is required please mention at time of order.

Cutting Blades should be ordered separately.

Product Code PRS-KA1010 Small
Length 1100 mm
Width 600 mm
Heigth 1300 mm
Blade Diameter 350 mm
Max. Cutting Heigth 700 mm
Cutting Length 700 mm
Engine Power 3 hp/220 V
Weigth 115 kg
Water Pump Power 0.37 hp/220 V

Product Code Product Description

PRS-KA0800 Slake Durability Apparatus, 220-240 V 50 Hz

PRS-KA0802 Pair of Mesh Drums for PRS-KA0800

STANDARDS : ASTM D4644

This test method has been developed to assess the deterioration of rocks over a period of time when subjected to water immersion.

Slake durability is a simulated weathering test to determine abrasion resistance during wetting and drying cycles of shale and similar soft rocks as used in embankments and other construction-related applications. Samples are alternately tumbled in mesh drums through a water medium and oven-dried for two cycles. The percent loss of mass is referred to as the slake durability index.

The PRS-KA0800 Slake Durability Apparatus consists of a motorized drive unit which is mounted on a baseplate and which can rotate two or four drums at a speed of 20 r.p.m. The tank assemblies are filled with water to a level 20 mm below the drum axis. The test drums are manufactured from 2.00 mm mesh, 140 mm dia. x 100 mm long.

Dimensions 1300x150x450 mm
Weigth (approx.) 15 kg

Compacting Factor Apparatus

Product Code Product Description

PRS-B0580 Compacting Factor Apparatus

STANDARDS : BS 1881-103, 5075

The PRS-B0580 Compacting Factor Apparatus is used to determine the compaction factor of concrete with low, medium and high workability.

Comprising two conical hoppers having a hinged trap door attached to the lower end of each hopper, allowing the concrete sample to flow freely into the cylindrical mould. The hoppers and the mould are mounted onto a rigid steel frame and are easily removable for cleaning.

Dimensions 300x400x1300 mm

Weight (approx.) 41 kg

Sieve Test Set
Product Code Product Description

PRS-B0518 Sleve Segregation Test Set

PRSG-4PC0050/Y Sieve Ã? 300x75 mm 5 mm Square Aperture

PRSG-4002/Y Pan Ã? 300x75 mm

STANDARDS : EN 12350-11
The PRS-B0518 Sieve Segregation Test Set is used for determining the resistance to sieve segregation of Self Compacting Concrete. The Sieve has 5 mm square apertures with a frame diameter of 300 mm conforming to ISO 3310-2 standard. Supplied complete with a Pan.

Dimensions 350x350x250 mm

Weight (approx.) 2,5 kg

L Shape Box Apparatus

Product Code Product Description

PRS-B0545 L Shape Box Apparatus

STANDARDS : EN 12350-9

The PRS-B0545 L Shape Box is used for determining the passing ability rate of freshly mixed self compacting concrete.

The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm.

L Shape Box is designed for ease of cleaning the vertical and horizontal hoppers.

The L Shape Box Apparatus is supplied complete with;
â?¢ Filling Hopper
â?¢ Base

Dimensions 300x1000x1350 mm
Weight (approx.) 35 kg

Moisture Balance

Product Code Product Description

PRSW-0610 Moisture Balance 50 g x 0.001 g

The PRSW-0610 Moisture Balance is specially designed to determine the moisture content of relatively small samples of various substances.

Features

â?¢ Easy operation provided by backlit LCD display
â?¢ Drying profile (standard, mild, step, rapid)
â?¢ Finish mode (manual, humidity stabilization, automatic, time defined)
â?¢ GLP/GMP printouts and reports
â?¢ Halogen lamp
â?¢ Standard and non-standard applications
â?¢ Optimization of work ensured by halogen lamps mode

Capacity 50 g

Pan Size Ã? 90 mm

Readability 1 mg

Maximum Sample Mass 50 g

Moisture Reading Accuracy 0.001 %

Repeatability ± 0.24% (sample < 2 g),

± 0.06% (sample 2-10 g),

± 0.04% (sample > 10 g)

Maximum Drying Temp. 160°C

Drying Modes 4 Modes: Standard / Quick / Step / Mild

Power of Heater 400 W

Power Supply 110-240 V 50-60 Hz AC

Display LCD (backlit)

Dimensions 210x335x190 mm

Weight (approx.) 5 kg

V Funnel

Product Code Product Description

PRS-B0540 V Funnel

STANDARDS : EN 12350-9

The PRS-B0540 V Funnel apparatus is used to evaluate the flow time of freshly mixed self-compacting concrete.

The test is not suitable when the maximum size of the aggregate exceeds 22.4 mm.

The test set consists of a stainless steel funnel placed vertically on a supporting stand. The discharge orifice is equipped with a lid, which can be momentarily opened.

Dimensions 525x300x1040 mm
Weight (approx.) 18 kg

Slump Test Set

Product Code Product Description

PRS-B0400 Slump Test Set

PRS-B0402 Slump Cone

PRS-B0404 Slump Base Plate 500x500x60 mm with Handle

PRS-B0406 Slump Funnel, Galvanized Steel

PRS-B0408 Tamping Rod Ã? 16x600 mm

PRS-B0410 Tamping Rod Ã? 10x300 mm

PRSGH-1695 Rubber Mallet

PRSGM-0380 Steel Ruler 300x1 mm
PRSGH-1605 Round Scoop, Medium

STANDARDS : EN 12350-2

The Slump test method is used for the determination of the consistency and workability of fresh concrete. The PRS-B0400 Slump Test Set is supplied either galvanized or paint coated to prevent corrosion.

The Slump Test Set are supplied complete with;

� Slump Cone Top Dia: 100 ±2 mm / Base Dia: 200 ±2 mm / Height: 300 ±2 mm
â?¢ Slump Base Plate 500x500x60 mm with Handle
â?¢ Slump Funnel, Galvanized Steel
â?¢ Tamping Rod Ã? 16x600 mm
â?¢ Rubber Mallet
â?¢ Steel Ruler 300x1 mm

Dimensions 550x600x250 mm (packed)

Weight (approx.) 6 kg

Cylinder Capping Frame

Product Code Product Description

PRS-B1054 Cylinder Capping Frame

STANDARDS : TS EN 12390â??3, 12390-1, 12504-1; ASTM C31, C192, C617, C39, C42; AASTHO T23, T126

The PRS-B1054 Cylinder Capping Frame is used to ensure that the planed end surfaces are perpendicular to the axis of the cylinder during the capping process.

The frame comprises vertical supports mounted on a steel base. All three type of samples can be capped with this single unit.

The Cylinder Capping Frame is supplied complete with;
Base Plates for 75, 100 and 150 mm dia. cylinder specimen

Dimensions 200x200x320 mm
Weight (approx.) 13 kg

Melting Pot

Product Code Product Description

PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz

PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz

STANDARDS : EN 12390â??3, 12390-1, 12504-1; ASTM C31, C192, C617, C39, C42; AASTHO T23, T126

The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC.

Dimensions 350x320x290 mm
Weight (approx.) 9 kg
Power 600 W

Freezing and Thawing Chamber

Product Code Product Description

PRSD-1440 Freezing and Thawing Chamber 285 L, 220-240 V 50-60 Hz

STANDARDS : EN 1338, 1339, 1340, 1367-1, 1367-6, 12371, 13748-2, 13450; CEN/TS 12390-9

It is used for the determination of resistance to freezing and thawing by providing freezing / thawing in air. The chamber is equipped with a user defined program including 10 steps. Time can be adjusted to 999 minutes for each step of the program. The temperature range of the cabinet is -30°C to +30°C.

The temperature is controlled by a sensor which can be immersed either into the sample, into the water which the sample is placed into or, into the salty water solution placed on the sample before starting the test. The calibration of the sensor is carried out using the user friendly menu.

The cabinet provides maximum cooling 5°C/hour and maximum heating 10°C/hour. The distribution of temperature in the cabinet is performed using the integral fan. Software for data transfer to a computer is supplied complete with the cabinet, and data can be monitored during the tests. Data can be converted to an excel report or to a graph.

The condenser of the cabinet is fitted with an air cooled hermetic cooler. The gas used for the cooler does not include CFCâ??s.

Internal Dimensions 490x530x1100 mm

External Dimensions 690x860x1940 mm

Weight (approx.) 225 kg

Power 1800 W

Electronic Analytical Balances

Product Code Product Description

PRSW-0620 Electronic Analytical Balance, LCD Screen 60-220 g x 0.00001-0.0001 g

PRSW -0622 Electronic Analytical Balance LCD Screen 220 g x 0.0001 g

PRSW -0625 Electronic Analytical Balance 200 g x 0.001 g

PRSW -0628 Electronic Analytical Balance 360 g x 0.001 g

PRSW -0630 Electronic Analytical Balance 510 g x 0.001 g

PRSW -0631 Electronic Analytical Balance 750 g x 0.001 g

PRSW -0632 Electronic Analytical Balance 1000 g x 0.001 g

Features

The PRSW Series Electronic Analytical Balances set the standard in terms of reliable measurements, user-friendly and long service life. Offering capacities from 200 g to 510 g with high sensitivities up to 0.01 mg readability makes these balances ideal for weighing small sample amounts. The balances can be used for routine tasks and/or complicated weighing procedures.

The PRSW-0620 and PRSW-0622 models have an automatic internal calibration feature, the other models in the range require external calibration.

The PRSW Series Analytical Balances provide fast and easy installation and cleaning with their ergonomic designs and brilliant displays. They can also be connected to printers or PC's through RS 232 outputs to give excellent monitoring and reporting performance.

Product Code Capacity Readability Pan Size Additional Power Supply

PRSW-0620 60-220 g 0.01-0.1 mg Ã? 70 AC Adapter

PRSW -0622 220 g 0.1 mg Ã? 85 Adapter

PRSW -0625 200 g 1 mg Ã? 115 Rechargable Battery

PRSW -0628 360 g 1 mg 128x128 mm AC Adapter

PRSW -0630 510 g 1 mg 128x128 mm AC Adapter

PRSW -0631 750 g 1 mg 128x128 mm AC Adapter

PRSW -0632 1000 g 1 mg 128x128 mm AC Adapter

Microwave Oven

Product Code Product Description

PRSD-1420 Microwave Oven 19 lt., 220-240 V 50-60 Hz

The PRSD-1420 Microwave Oven is used for drying, conditioning, moisture determination and pre-heating applications when quick drying is required.

The PRSD-1420 has max. 250°C, 100 min. program timer, rotating tray system, 2000 W

Capacity 19 litres

Working Frequency 2450 Mhz

Internal Dimensions 210x295x315 mm

External Dimensions 450x300x300 mm

Weigth (approx.) 11 kg

Power 2000 W

Water Impermeability Tester ( 3 Unit )

Product Code Product Description

PRS-BWIT3 Water impermeability Tester ( 3 Unit )

STANDARDS : TS EN 12390-8,EN 12364,DIN 1048,ISO 7031

Apparatus at 3 or 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure The unit accepts up to 3 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm

The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimenâ??s surface for a time as requested by Standard, by using a suitable air compressor (accessory) having at least 5 or 20 bar pressure capacity

The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette fixed on the front panel

Dimension 1290 x 450 x 1280 mm

Weight 120 kg (app.)