Product Code Product Description
PRS-A1000 Specific Gravity Frame
PRS-A1003 Plastic Water Tank
PRS-A1005 Cradle for Hardened Concrete Specimens
PRS-A1010 Density Basket Ã? 200 mm x 200 mm deep
The Specific Gravity Frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates.
Consisting of a purpose built robust frame designed to support the electronic balance (not supplied), a wire basket and plastic water tank. The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water.
Any type of electronic balance fitted with under-bench weighing facility can be used. Balance, Cradle and Density Basket should be ordered separately.
The Specific Gravity Frame is supplied complete with;
â?¢ A water tank
Dimensions 600x500x1100 mm
Weight (approx.) 25 kg
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
GENERAL TECHNICAL SPECIFICATION Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
Soybean Oil Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 - 141 Saponification Value: mg HOH/g: 180 - 200 Unsaponifiable Matter: %
GENERAL TECHNICAL SPECIFICATION SOYBEAN OIL Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
Our Acid Battery Scrap on 99.99%. Monthly Supply Capacity: 500 - 1500 metric tons, Type: all kind of scrap batteries, Fe Content: HMS Fe Content (%): 100%) Drained Battery Scrap: Black Packaging Detail: Pallet with shrink wrapping Battery features: - Sealed and maintenance free operation battery - Non-Spillable construction design. - ABS Containers and Covers (UL94HB), UL94V-0 optional. - Safety valve installation for explosion proof. - High quality and high reliability. - Exceptional deep discharge recovery performance. - Low self discharge characteristic. - Flexibility design for multiple install positions. - No memory effec - CE certificate - Wide operating temperature range Battery Application: -Solar system - Alarm System - Cable Television - Communication Equipment - Control Equipment - Security System - Medical Equipment - UPS - Power Tools - Toys - Emergency Power System - LED Lig WE ARE TRADING MANUFACTURERS OF ALL TYPES OF used car scrap battery WORLDWIDE. Specifications we are offer 1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick scrap used a car battery Specifications Specifications 1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick start & long life 4.1-2 year used car scrap battery 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific the gravity of the electrolyte or add water to a battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantees leakproof operation in and position with no adverse effect on capacity or service life. (4)With our high-quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97
We can supply Acetic Acid Industrial Grade and Food Grade. Commodity:Acetic acid. Other name: Glacial acetic acid Molecular formula CH3COOH CAS:64-19-7 EC No.200-580-7 Introduction: Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition. the most important characteristic of this way are as following: mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way. Specifications: Apha color:
ANALYSIS VALUES Organoleptic Bright, clear; with absence of foreign odors and flavors Peroxide index 0.1 – 1.0 (meq O2 / Kg) Free fatty acid as oleic acid 0.03 – 0.07 (g / 100g) Lovibond color Yellow 10 – 15 (in 133.35mm cell) Red 0.6 – 1.5 (in 133.35mm cell) Unsaponifiable matter Max.: 1.00 (g / 100g) Soap Max.: 10 (ppm) Winter Test Oil will remain clear after cooling it for 24hs a 0ºC Moisture and volatile matter Max.: 0.05 (g / 100g) Impurities Will not contain naked eye Insoluble impurities Max.: 0.02 (g / 100g) Specific gravity at 25ºC 0.9133 – 0.9175 Refractive index at 25ºC 1.4706 – 1.4740 Iodine index 110 – 140 (g I2 / 100g) Saponification value 188 – 192 (mg OHK / g) Halphen – Gastaldi test Negative Linolenic acid Max.: 0.3 (as fatty acid / 100g of total fatty acids)
