Product Code Product Description PRS-CM6700 250 kN Cement Compression Frame PRS-CM6710 15/250 kN Cement Flexure/Compression Frame STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349;BS 3892-1, 4551-1 The PRS-CM6700 and PRS-CM6710 , very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices. Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be ordered separately. Distance Pieces for Frame Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens. Distance Pieces PRS-CM4630 Distance piece dia. 165 mm x 15 mm PRS-CM4631 Distance piece dia. 165 mm x 30 mm PRS-CM4633 Distance piece dia. 165 mm x 50 mm PRS-CM4634 Distance piece dia. 165 mm x 90 mm Platens PRS-CM0116 Upper Loading Platen with Ball Seating Assembly �:165 mm and Lower Loading Platen, �:165 mm Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished. The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm. Loading Cylinder Assembly & Limit Switch All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity. The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder. Accessories PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2�) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN