Oxygen Compressor induction
High quality Oil free Oxygen Compressor, which is customized for booster the oxygen pressure to fill the oxygen gas into the oxygen cylinders.
Oxygen Compressor Features
1. Non-lubrication, oil free;
2. Equipped with low voltage asynchronous motor;
3. The core of the 1st stage and the inside of the cooler is stainless steel;
4. Skid mounted;
5. Time proven.
Oxygen Compressor specifications
(1) Flow capacity: 50Nm3/h; (For other flow capacity, please let us know.)
(2) Inlet pressure: 4bar (0.1-5bar)
(3) Discharge pressure: 150bar
(4) Vertical, two columms, three stage, three cylinders. single action, water cooled, oil free.
The quotation and main technical parameters of
ZW-0.2/4~150 oil free oxygen compressor
(Fitted 380V,50Hz low voltage asynchronous motor)
ZW-0.2/4~150???????? (?????)
ZW-0.2/4~150 non-lubrication oxygen compressor (skid type, namely bare oxygen compressor, driven motor, 1st, 2nd, 3rd stage cooler, gas pipeline are in the same skid)
A. Bare compressor/?????(2Z2.2???-the parts are in the same skid, namely the bare compressor, driven motor, 1st, 2nd, 3rd stage cooler, gas pipeline are in the same skid)
1.Model ZW-0.2/4~150
2.Type
Vertical type, two columns three stages, three cylinders, single action, water cooled, oil free of cylinder.
3.Compressed medium ??/oxygen
4.Capacity 0.2 m3/min (50Nm3/hr)
5.Suction pressure 0.4 MPa g
6.Discharge pressure 15 MPa g
7.Suction temperature =40?
8.Discharge temperature =40?(????/cooled by 3rd stage cooler)
9.Shaft power =14
10.Stoke of piston 130mm
11. Lubricant temperature =70?
12.Water inlet temperature =30?
13. Water outlet temperature =40?
14.Consumption of cooling water =4 t/h
15.Driven way Driven by belt
16.Overall dimension 2495mm×1800mm×2945mm(L×W×H)
17. Weight of compressor 4000 kg
B.Motor
1.Type Low voltage asynchronous motor
2.Model Y180M-4
3.Rated power 18.5 KW
4.Rotational speed 1470r/min
5.Voltage 380V
7. Protective level IP 44
8 frequency 50 HZ
C.Electric control cabinet
1./Model ??/Cabinet
2./Type XHS-18.5 (??????)
DAfter cooler 0505.063??? coil pipe type
E/ Gas inlet filter
the material of shell and screen for filter is stainless steel
1./Model 0663.048
F/Check valve 0663.087
G./Attached special tools
H./Attached special spare parts, accessories
I./Attached documents
Air Compressor introduction
BT Screw Air Compressor, which is based on rotary screw technology, is running stable, and has been market proven. Now, BT is owned by Atlas Copco.
Air Compressor Features
1. Atlas Copco owned company in China;
2. Stable, market proven;
3. Low noisy level.
Air Compressor specifications
Model
Power
(kw) Discharge
Pressure
(Mpa)
Air flow
(m3/min) DImension(mm) Interface
7A 5.5 0.7 0.85
0.8 0.75 630*620*755 3/4"
1.0 /
1.2 /
10A 7.5 0.7 1.35
0.8 1.25 950*650*855 3/4"
1.0 1.10
1.2 0.96
15A 11 0.7 1.95
0.8 1.80 950*650*855 3/4"
1.0 1.58
1.2 1.30
20A 15 0.7 2.25
0.8 2.15 950*650*855 3/4"
1.0 1.95
1.2 1.60
25A 18.5 0.7 3.20
0.8 3.00 1100*865*1145 1"
1.0 2.70
1.2 2.30
30A 22 0.7 3.80
0.8 3.60 1100*865*1145 1“
1.0 3.20
1.2 2.80
40A 30 0.7 4.75
0.8 4.50 1100*865*1145 1“
1.0 4.25
1.2 3.75
50A 37 0.7 6.80
0.8 6.28 1335*970*1630 1.5"
1.0 5.60
1.2 4.60
60A 45 0.7 7.80
0.8 7.30 1335*970*1630 1.5"
1.0 6.60
1.2 5.70
75A/W 55 0.7 10.50
0.8 9.80 1585*1170*1800 2"
1.0 8.80
1.2 8.00
100A/W 75 0.7 13.50
0.8 13.00 1585*1170*1800 2"
1.0 11.80
1.2 10.00
75AG/WG 55 0.7 10.80
0.8 10.00 1585*1170*1800 2"
1.0 9.00
1.2 8.20
100AG/WG 75 0.7 13.80
0.8 13.30 1585*1170*1800 2"
1.0 12.10
1.2 10.20
120A/W 90 0.7 17.1
0.8 16.9 1710*1170*1800 2"
1.0 14.6
1.2 12.6
150A/W 110 0.7 21
0.8 20 2476*1526*1800 DN65
1.0 17
1.2 14.8
175A/W 132 0.7 24.1
0.8 23.6 2476*1526*1800 DN65
1.0 20.5
1.2 17.8
200A/W 160 0.7 29
0.8 28.5 2650*1720*2100 DN80
1.0 26.5
1.2 22.5
Mobile Nitrogen Generator Introduction:
The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply.
ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand.
Mobile Nitrogen Generator specifications:
1. Nitrogen production capacity: 10~600Nm3/h
2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%)
3. Nitrogen pressure from the Nitrogen Generator: 1-7bar
4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand.
5. Skid-mounted, Container mounted, Vehicle mounted;
Mobile Nitrogen Generator Features:
(1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor;
(2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves;
(3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs;
(4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted;
(5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized;
(6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy;
(7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Mobile Nitrogen Generator Introduction:
The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply.
ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand.
Mobile Nitrogen Generator specifications:
1. Nitrogen production capacity: 10~600Nm3/h
2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%)
3. Nitrogen pressure from the Nitrogen Generator: 1-7bar
4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand.
5. Skid-mounted, Container mounted, Vehicle mounted;
Mobile Nitrogen Generator Features:
(1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor;
(2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves;
(3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs;
(4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted;
(5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized;
(6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy;
(7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Mobile Oxygen Generator Introduction:
The Mobile Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (ZMS) to separate the Oxygen gas from the air. It is more and more popular used for on-site Oxygen supply, or even for some specific gas station which has to move frequently.
ShinTek Mobile Oxygen Generator consists of air compressor, air dryer, air filters, PSA Oxygen generator, optional cylinder filling system and related control system. There are three types for choose: skid-mounted, container mounted or vehicle mounted.
Mobile Oxygen Generator specifications:
1. Oxygen production capacity: 5 ~ 100 Nm3/h
2. Oxygen purity: 93+/-3%;
3. Oxygen pressure from the Oxygen Generator: 1-5bar
4. Oxygen pressure can be boosted to be as higher as 150bar per customer’s demand.
5. Skid-mounted, Container mounted, Vehicle mounted;
Mobile Oxygen Generator Features:
(1) Three types for choose: skid-mounted or container-mounted or vehicle-mounted;
(2) The Mobile Oxygen Generator is equipped with a stable screw air compressor;
(3) The Mobile Oxygen Generator use Siemens PLC and SMC valves;
(4) Fewer moving parts enable the Mobile Oxygen Generator more reliable, and less maintenance jobs;
(5) The Mobile Oxygen Generator is very easy to be operated, unmanned operation can be realized;
(6) The Mobile Oxygen Generator is energy efficient (0.3 KWH/m3 Oxygen), save energy;
(7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Plant Introduction:
The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders.
Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency.
Oxygen Plant specifications:
1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day)
2. Oxygen purity: 93+/-3%
3. Oxygen output pressure: 1-5bar
4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster)
5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application;
6. Skid-mounted enable an easy installation and transportation.
Standard Oxygen Plant:
ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW)
STPO-4493+/-3%1-50.865.5-7.55.43
STPO-5593+/-3%1-51.175.5-7.57.60
STPO-8893+/-3%1-51.875.5-7.511.75
STPO-101093+/-3%1-52.335.5-7.515.75
STPO-151593+/-3%1-53.255.5-7.519.05
STPO-202093+/-3%1-54.305.5-7.531.59
STPO-252593+/-3%1-55.805.5-7.531.59
STPO-303093+/-3%1-57.005.5-7.539.04
STPO-353593+/-3%1-57.585.5-7.547.00
STPO-404093+/-3%1-59.305.5-7.557.70
STPO-454593+/-3%1-510.55.5-7.557.70
STPO-505093+/-3%1-510.65.5-7.557.70
STPO-606093+/-3%1-514.05.5-7.577.70
STPO-656593+/-3%1-515.25.5-7.592.70
STPO-707093+/-3%1-516.25.5-7.592.70
STPO-808093+/-3%1-518.75.5-7.5114.5
STPO-909093+/-3%1-520.05.5-7.5114.5
STPO-10010093+/-3%1-523.35.5-7.5137.0
STPO-16016093+/-3%1-537.45.5-7.5229.0
STPO-20020093+/-3%1-546.75.5-7.5274.0
Remark: Above standard model Oxygen Plant is based on an altitude of
Nitrogen Generator Introduction:
The Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply and filling nitrogen cylinders.
Our PSA Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. The patented vessel design enable our PSA Nitrogen Generator a lowest energy consumption and best efficiency.
Nitrogen Generator specifications:
1. Nitrogen production capacity: 2~2000Nm3/h
2. Nitrogen purity: 90%, 99%, 99.5%, 99.9%, 99.99%, 99.999%, 99.9995%...
3. Nitrogen pressure from the Nitrogen Generator: 1-7bar
4. Skid-mounted enable an easy installation and transportation.
Nitrogen Generator Features:
(1) The Nitrogen Generator is equipped with a stable Atlas Copco screw air compressor;
(2) The Nitrogen Generator use Siemens PLC and SMC valves;
(3) Fewer moving parts enable the Nitrogen Generator more reliable, and less maintenance jobs;
(4) The Nitrogen Generator does not need foundation base;
(5) The Nitrogen Generator does not need cooling water;
(6) The Nitrogen Generator is skid-mounted, very easy to be transported and installed;
(7) The Nitrogen Generator is very easy to be operated, unmanned operation can be realized;
(8) The Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy;
(9) The Nitrogen Generator can be used for both onsite application and filling oxygen cylinders.
(10) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Generator Introduction:
The Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders.
Our Oxygen Generator consists of air compressor, air dryer, air filters, PSA oxygen generator, and related control system. The patented design enable our PSA Oxygen Generator a lowest energy consumption and best efficiency.
Oxygen Generator specifications:
1. Oxygen Production capacity: 2~200Nm3/h (12cylinders/day to 800 cylinders/day)
2. Oxygen purity: 93+/-3%
3. Oxygen output pressure: 1-5bar
4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster)
5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application;
6. Skid-mounted enable an easy installation and transportation.
Standard Oxygen Generator:
ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW)
STPO-4493+/-3%1-50.865.5-7.55.43
STPO-5593+/-3%1-51.175.5-7.57.60
STPO-8893+/-3%1-51.875.5-7.511.75
STPO-101093+/-3%1-52.335.5-7.515.75
STPO-151593+/-3%1-53.255.5-7.519.05
STPO-202093+/-3%1-54.305.5-7.531.59
STPO-252593+/-3%1-55.805.5-7.531.59
STPO-303093+/-3%1-57.005.5-7.539.04
STPO-353593+/-3%1-57.585.5-7.547.00
STPO-404093+/-3%1-59.305.5-7.557.70
STPO-454593+/-3%1-510.55.5-7.557.70
STPO-505093+/-3%1-510.65.5-7.557.70
STPO-606093+/-3%1-514.05.5-7.577.70
STPO-656593+/-3%1-515.25.5-7.592.70
STPO-707093+/-3%1-516.25.5-7.592.70
STPO-808093+/-3%1-518.75.5-7.5114.5
STPO-909093+/-3%1-520.05.5-7.5114.5
STPO-10010093+/-3%1-523.35.5-7.5137.0
STPO-16016093+/-3%1-537.45.5-7.5229.0
STPO-20020093+/-3%1-546.75.5-7.5274.0
Remark: Above standard model Oxygen Generator is based on an altitude of
Oxygen Plant Introduction:
The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders.
Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency.
Oxygen Plant specifications:
1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day)
2. Oxygen purity: 93+/-3%
3. Oxygen output pressure: 1-5bar
4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster)
5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application;
6. Skid-mounted enable an easy installation and transportation.
Standard Oxygen Plant:
Model Prod capacity (Nm3/h) O2 purity (%) Outlet pressure (bar) Compressed air Min. (m3/min) Working pressure (bar) Power consumption (KW)
STPO-4 4 93+/-3% 1-5 0.86 5.5-7.5 5.43
STPO-5 5 93+/-3% 1-5 1.17 5.5-7.5 7.60
STPO-8 8 93+/-3% 1-5 1.87 5.5-7.5 11.75
STPO-10 10 93+/-3% 1-5 2.33 5.5-7.5 15.75
STPO-15 15 93+/-3% 1-5 3.25 5.5-7.5 19.05
STPO-20 20 93+/-3% 1-5 4.30 5.5-7.5 31.59
STPO-25 25 93+/-3% 1-5 5.80 5.5-7.5 31.59
STPO-30 30 93+/-3% 1-5 7.00 5.5-7.5 39.04
STPO-35 35 93+/-3% 1-5 7.58 5.5-7.5 47.00
STPO-40 40 93+/-3% 1-5 9.30 5.5-7.5 57.70
STPO-45 45 93+/-3% 1-5 10.5 5.5-7.5 57.70
STPO-50 50 93+/-3% 1-5 10.6 5.5-7.5 57.70
STPO-60 60 93+/-3% 1-5 14.0 5.5-7.5 77.70
STPO-65 65 93+/-3% 1-5 15.2 5.5-7.5 92.70
STPO-70 70 93+/-3% 1-5 16.2 5.5-7.5 92.70
STPO-80 80 93+/-3% 1-5 18.7 5.5-7.5 114.5
STPO-90 90 93+/-3% 1-5 20.0 5.5-7.5 114.5
STPO-100 100 93+/-3% 1-5 23.3 5.5-7.5 137.0
STPO-160 160 93+/-3% 1-5 37.4 5.5-7.5 229.0
STPO-200 200 93+/-3% 1-5 46.7 5.5-7.5 274.0
Remark: Above standard model Oxygen Plant is based on an altitude of
Vacuum Casting Furnace Introduction:
As the most experienced Vacuum Casting Furnace manufacturer in China, ShinTek Vacuum Casting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on…
Vacuum Casting Furnace Specifications:
Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500
Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5
Load (KG) 10 25 50 100 200 500 1000 1500
Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW
Voltage 300V 175V 375V 375V 375V 700V 700V 700V
Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz
Max. temperature 1600?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 6.7*10-3Pa
Leakage rate =4Pa/h
Remark: The Vacuum Casting Furnace can be customized for your specific project.
Vacuum Casting Furnace features:
(1) Vacuum Casting Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Casting Furnace – Suitable for most of metallurgy industries, can be customized for users;
(3) Vacuum Casting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system.
(4) Vacuum Casting Furnace – Two feeding method for choose: Manual or Semi-continueous;
(5) Vacuum Casting Furnace – Friendly control system.
Vacuum Furnace Introduction:
ShinTek can produce varieties of Vacuum Furnaces, including Vacuum heat treatment Furnace, Vacuum Brazing Furnace, Vacuum Sintering Furnace, Vacuum Induction Melting Furnace and so on…
Vacuum Heat Treatment Furnace: Vacuum Quenching Furnace, Vacuum Annealing Furnace, Vacuum Tempering Furnace, Vacuum Carburizing Furnace, etc...
Vacuum Brazing Furnace: Vacuum Aluminum Brazing Furnace, Vacuum High Temperature Brazing Furnace, Vacuum Diffusion Brazing Furnace, etc...
Vacuum Sintering Furnace: Vacuum Powder Metallurgy Sintering Furnace, Vacuum MIM Sintering Furnace, Vacuum Hot Pressing Furnace...
The Vacuum Furnace can be used for a wide of industries, including High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy, Ti alloy, Beryllium Bronze, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal, magnetic material, nonferrous metal, etc…
Vacuum Furnace Specifications:
Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500
Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600
Load (KG) 60 150 250 500 800 1000 2500
Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW
Max. temperature 1350?
Temperature uniformity +/-5? (can achieve +/-3?for some specific project.)
Ultimate vacuum level (Cold) 8*10-4 Pa
Leakage rate =0.67 Pa/h
Vacuum Furnace features:
(1) Vacuum Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Furnace – Friendly control system.
Vacuum Annealing Furnace Introduction:
ShinTek Vacuum Annealing Furnaces can be used for annealing varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc…
Vacuum Annealing Furnace Specifications:
Model STVF-A-80 STVF-A-100 STVF-A-150 STVF-A-200
Working zone size 600*400*400 750*500*500 900*600*600 1200*800*800
Load (KG) 200 300 500 1000
Power 80KW 100KW 150KW 200KW
Max. temperature 1100?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 5*10-4 Pa
Leakage rate =0.67 Pa/h
Remark: The Vacuum Annealing Furnace can be customized for your specific project.
Vacuum Annealing Furnace features:
(1) Vacuum Annealing Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Annealing Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Annealing Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Annealing Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Annealing Furnace – Friendly control system.
Vacuum Brazing Furnace Introduction:
ShinTek can produce varieties of Vacuum Brazing Furnaces, including Vacuum Aluminum Brazing Furnace, Vacuum High Temperature Brazing Furnace, Vacuum Diffusion Brazing Furnace and so on…
Our Vacuum Brazing Furnaces can be used in a wide of industries, including Stainless Steel, Copper alloy, high temperature alloy, Titanium alloy, Hard metal, ceramic metallization, silver-copper, aluminum, nickel alloy, electric radar board antenna, radiator, compensation, PTC heater, oil radiator, plate-fin heat exchanger and so on…
Vacuum Brazing Furnace Specifications:
Model STVF-AB-120 STVF-AB-200 STVF-AB-380 STVF-AB-580
Working zone size 1000*600*600 2100*900*900 3000*900*900 5800*1000*1200
Load (KG) 500 2000 3000 6000
Power 120KW 200KW 380KW 580KW
Max. temperature 750?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 8*10-4 Pa
Leakage rate =0.4 Pa/h
Remark: The Vacuum Brazing Furnace can be customized for your specific project.
Vacuum High Temperature Brazing Furnace:
Model STVF-B-65 STVF-B-120 STVF-AB-150 STVF-AB-220
Working zone size 600*400*400 750*500*500 900*600*600 1200*800*800
Load (KG) 200 300 500 1000
Power 65KW 120KW 150KW 220KW
Max. temperature 1320?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 8*10-4 Pa
Leakage rate =0.5 Pa/h
Remark: The Vacuum Brazing Furnace can be customized for your specific project.
Vacuum Brazing Furnace features:
(1) Vacuum Brazing Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Brazing Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Brazing Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Brazing Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Brazing Furnace – Friendly control system.
STAF-1400 Series Controlled Atmosphere Furnace
The STAF-1400 series Controlled Atmosphere Furnaces are customized for some specific applications in the labs. They can be used for varieties of industries, such as the electronic ceramic sintering, glass annealing or crystallization, ceramic metallization, powder metallurgy, technological material innovation and so on…
Features:
1. Double-layer wall, equipped with air-cooled system, enable a quick temperature rising or decreasing rate;
2. A Perfect high-temperature sealing kits on the cover and top; a water cooling system is equipped in the cover;
3. There is a gas inlet, a gas outlet, a hole for pre-vacuum pump system on the furnace body.
4. Furnace body: Steel plate
5. The heat barrier system: Al2O3 polycrystalline fibre by a patent assembly way, enable a 50% energy saving.
6. Heater: silicon carbide rod
7. Intelligent temperature control system;
8. Can filled with Hydrogen, Argon, Nitrogen depend on your specific application.
9. Equipped with pre-vacuum pump system, can achieve a pre-vacuum level of 20kPa;
10. Pressure after filling with gas (Argon, Hydrogen, Nitrogen): 0.1MPa
Specifications:
Atmosphere Furnace STAF-1400-5 STAF-1400-8 STAF-1400-10 STAF-1400-16
Power consumption 5KW 8KW 10KW 16KW
Voltage 220V 220V/380V 380V 380V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
Working zone size (mm) 200*150*150 300*200*200 400*300*300 500*400*400
Max. temperature 1400 ?
Working temperature 1300-1350?
Temperature rising rate =20 ?/min, adjustable
Temperature uniformity +/-5?
Temperature accuracy +/-1?
Heater silicon carbide rod
Temperature control sys Intelligent PID
Unit price
(USD, Ex-works) 7,380.00 8,360.00 10,820.00 14,300.00
Remark 1.) The working zone size, temperature or other functions can be customized per user’s specific requirements;
2.) An additional wet hydrogen system costs around 1000 USD.
Payment terms:
1.) 100% paid by T/T before production; or
2.) 50% paid by T/T (advance), balance 50% paid by T/T before delivery (after inspection) . Or
3.) 100% paid by L/C (confirmed and irrevocable, at sight) before production.
STAF-1700 Series Controlled Atmosphere Furnace
The STAF-1700 series Controlled Atmosphere Furnaces are customized for some specific applications in the labs. They can be used for varieties of industries, such as the electronic ceramic sintering, glass annealing or crystallization, ceramic metallization, powder metallurgy, technological material innovation and so on…
Features:
1. Double-layer wall, equipped with air-cooled system, enable a quick temperature rising or decreasing rate;
2. A Perfect high-temperature sealing kits on the cover and top; a water cooling system is equipped in the cover;
3. There is a gas inlet, a gas outlet, a hole for pre-vacuum pump system on the furnace body.
4. Furnace body: Steel plate
5. The heat barrier system: Al2O3 polycrystalline fibre by a patent assembly way, enable a 50% energy saving.
6. Heater: MoSi2 rod
7. Intelligent temperature control system;
8. Can filled with Hydrogen, Argon, Nitrogen depend on your specific application.
9. Equipped with pre-vacuum pump system, can achieve a pre-vacuum level of 20kPa;
10. Pressure after filling with gas (Argon, Hydrogen, Nitrogen): 0.1MPa
Specifications:
Atmosphere Furnace STAF-1700-6 STAF-1700-8 STAF-1700-15 STAF-1700-25
Power consumption 6KW 8KW 15KW 25KW
Voltage 220V 380V 380V 380V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
Working zone size (mm) 200*150*150 300*200*200 400*300*300 500*400*400
Max. temperature 1700 ?
Working temperature 1600?
Temperature rising rate =20 ?/min, adjustable
Temperature uniformity +/-5?
Temperature accuracy +/-1?
Heater MoSi2 rod
Temperature control sys Intelligent PID
Unit price
(USD, Ex-works) 9,630.00 11,885.00 13,520.00 15,640.00
Remark 1.) The working zone size, temperature or other functions can be customized per user’s specific requirements;
2.) An additional wet hydrogen system costs around 1000 USD.
Payment terms:
1.) 100% paid by T/T before production; or
2.) 50% paid by T/T (advance), balance 50% paid by T/T before delivery (after inspection) . Or
3.) 100% paid by L/C (confirmed and irrevocable, at sight) before production.
Vacuum Carburizing Furnace Introduction:
ShinTek Vacuum Carburizing Furnace can be used for Quenching and Carburizing varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc…
Vacuum Carburizing Furnace Specifications:
Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500
Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600
Load (KG) 60 150 250 500 800 1000 2500
Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW
Max. temperature 1350?
Temperature uniformity +/-5? (can achieve +/-3?for some specific project.)
Ultimate vacuum level (Cold) 5*10-4 Pa
Leakage rate =0.67 Pa/h
Remark: The Vacuum Carburizing Furnace can be customized for your specific project.
Vacuum Carburizing Furnace features:
(1) Vacuum Carburizing Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Carburizing Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Carburizing Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Carburizing Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Carburizing Furnace – Friendly control system.
The main difference between Oil Quenching and Gas Quenching:
1. Oil Carburizing – Total investment is lower;
2. Gas Carburizing – Small deformation on the parts after treatment; Do not need clean after treatment.
Vacuum Heat treatment Furnace Introduction:
ShinTek can produce varieties of vacuum heat treatment furnace, including Vacuum Quenching Furnace, Vacuum Annealing Furnace, Vacuum Tempering Furnace, Vacuum Carburizing Furnace etc…which can be used for heat-treating varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc…
Vacuum Heat Treatment Furnace Specifications:
Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500
Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600
Load (KG) 60 150 250 500 800 1000 2500
Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW
Max. temperature 1350?
Temperature uniformity +/-5? (can achieve +/-3?for some specific project.)
Ultimate vacuum level (Cold) 8*10-4 Pa
Leakage rate =0.67 Pa/h
Remark: The Vacuum Heat treatment Furnace can be customized for your specific project.
Several hotzone design for choose: Horizontal, Vertical;
Vacuum Heat Treatment Furnace features:
(1) Vacuum Heat Treatment Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Heat Treatment Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Heat Treatment Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Heat Treatment Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Heat Treatment Furnace – Friendly control system.
Vacuum Induction Melting Furnace Introduction:
As the most experienced Vacuum Induction Melting Furnace manufacturer in China, ShinTek Vacuum Induction Melting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on…
Vacuum Induction Melting Furnace Specifications:
Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500
Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5
Load (KG) 10 25 50 100 200 500 1000 1500
Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW
Voltage 300V 175V 375V 375V 375V 700V 700V 700V
Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz
Max. temperature 1600?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 6.7*10-3Pa
Leakage rate =4Pa/h
Remark: The Vacuum Induction Melting Furnace can be customized for your specific project, and also can be equipped with casting furnace for your melting and casting process.
Vacuum Induction Melting Furnace features:
(1) Vacuum Induction Melting Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Induction Melting Furnace – Suitable for most of metallurgy industries, can be customized for users;
(3) Vacuum Induction Melting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system.
(4) Vacuum Induction Melting Furnace – Two feeding method for choose: Manual or Semi-continueous;
(5) Vacuum Induction Melting Furnace – Friendly control system.
Vacuum Quenching Furnace Introduction:
ShinTek Vacuum Quenching Furnace includes vacuum oil quenching furnace and vacuum gas quenching furnace, which can be used for quenching varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc…
Vacuum Quenching Furnace Specifications:
Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500
Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600
Load (KG) 60 150 250 500 800 1000 2500
Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW
Max. temperature 1350?
Temperature uniformity +/-5? (can achieve +/-3?for some specific project.)
Ultimate vacuum level (Cold) 8*10-4 Pa
Leakage rate =0.67 Pa/h
Remark: The Vacuum Quenching Furnace can be customized for your specific project.
1. Several hotzone design for choose: Horizontal, Vertical;
2. Single chamber, Twin chamber, Three chamber;
Vacuum Quenching Furnace features:
(1) Vacuum Quenching Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Quenching Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Quenching Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Quenching Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Quenching Furnace – Friendly control system.
The main difference between Oil Quenching and Gas Quenching:
1. Oil quenching – Total investment is lower;
2. Gas quenching – Small deformation on the parts after treatment; Do not need clean after treatment.
Vacuum Tempering Furnace Introduction:
ShinTek Vacuum Tempering Furnaces can be used for Tempering varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc…
Vacuum Tempering Furnace Specifications:
Model STVF-T-80 STVF-T-100 STVF-T-150 STVF-T-200
Working zone size 600*400*400 750*500*500 900*600*600 1200*800*800
Load (KG) 200 300 500 1000
Power 80KW 100KW 150KW 200KW
Max. temperature 1100?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 5*10-4 Pa
Leakage rate =0.67 Pa/h
Remark: The Vacuum Tempering Furnace can be customized for your specific project.
Vacuum Tempering Furnace features:
(1) Vacuum Tempering Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Tempering Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Tempering Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Tempering Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Tempering Furnace – Friendly control system.
Oxygen Plant Introduction:
The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders.
Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency.
Oxygen Plant specifications:
1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day)
2. Oxygen purity: 93+/-3%
3. Oxygen output pressure: 1-5bar
4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster)
5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application;
6. Skid-mounted enable an easy installation and transportation.
Standard Oxygen Plant:
Model Prod capacity (Nm3/h) O2 purity (%) Outlet pressure (bar) Compressed air Min. (m3/min) Working pressure (bar) Power consumption (KW)
STPO-4 4 93+/-3% 1-5 0.86 5.5-7.5 5.43
STPO-5 5 93+/-3% 1-5 1.17 5.5-7.5 7.60
STPO-8 8 93+/-3% 1-5 1.87 5.5-7.5 11.75
STPO-10 10 93+/-3% 1-5 2.33 5.5-7.5 15.75
STPO-15 15 93+/-3% 1-5 3.25 5.5-7.5 19.05
STPO-20 20 93+/-3% 1-5 4.30 5.5-7.5 31.59
STPO-25 25 93+/-3% 1-5 5.80 5.5-7.5 31.59
STPO-30 30 93+/-3% 1-5 7.00 5.5-7.5 39.04
STPO-35 35 93+/-3% 1-5 7.58 5.5-7.5 47.00
STPO-40 40 93+/-3% 1-5 9.30 5.5-7.5 57.70
STPO-45 45 93+/-3% 1-5 10.5 5.5-7.5 57.70
STPO-50 50 93+/-3% 1-5 10.6 5.5-7.5 57.70
STPO-60 60 93+/-3% 1-5 14.0 5.5-7.5 77.70
STPO-65 65 93+/-3% 1-5 15.2 5.5-7.5 92.70
STPO-70 70 93+/-3% 1-5 16.2 5.5-7.5 92.70
STPO-80 80 93+/-3% 1-5 18.7 5.5-7.5 114.5
STPO-90 90 93+/-3% 1-5 20.0 5.5-7.5 114.5
STPO-100 100 93+/-3% 1-5 23.3 5.5-7.5 137.0
STPO-160 160 93+/-3% 1-5 37.4 5.5-7.5 229.0
STPO-200 200 93+/-3% 1-5 46.7 5.5-7.5 274.0
Remark: Above standard model Oxygen Plant is based on an altitude of
Air Separation Plant Introduction:
The Air Separation Plant is based on deep freezing cryogenic technology. The Air Separation Plant includes air cooling, twin bed adsorption, frozen cycle theory of low inflation turbine expander, after through advanced and efficient fin heat exchanger ,the air becomes liquid , then according to the different boiling point of liquid oxygen, and liquid nitrogen, second distillation in the fractionators, then get the high purity (99.6%) oxygen and more than 99.99% purity nitrogen and optional argon.
We are very proud of that we can manufacture such small capacity Air Separation Plant with a very good energy efficiency, due to our technology innovation!
Air Separation Plant specifications:
Air Separation Plant
Oxygen production capacity: 30-180Nm3/h (120cylinders/day to 720cylinders/day)
Nitrogen production capacity: 30-180Nm3/h (120cylinders/day to 720cylinders/day)
Oxygen purity: 99.6%
Nitrogen purity: 99.99%
Can fill cylinders
Standard Air Separation Plant:
ModelKZON-40KZON-50KZON-100KZON-150KZON-180
Oxygen capacity40Nm3/h50Nm3/h100Nm3/h150Nm3/h180Nm3/h
Oxygen purity99.6%99.6%99.6%99.6%99.6%
Nitrogen capacity40Nm3/h50Nm3/h100Nm3/h150Nm3/h180Nm3/h
Nitrogen purity99.99%99.99%99.99%99.99%99.99%
Operation pressure10-12bar10-12bar10-12bar10-12bar10-12bar
Start time/Warm up10hours10hours10hours10hours10hours
Power consumption76KW98KW175.5KW299.5KW299.5KW
It can fill (cylinders/day)160200400600720
Remark:
1. Above standard model Air separation plant is based on an altitude of
Cryogenic Oxygen Plant Introduction:
The Cryogenic Oxygen Plant is based on deep freezing cryogenic technology. The equipment includes air cooling, twin bed adsorption, frozen cycle theory of low inflation turbine expander, after through advanced and efficient fin heat exchanger ,the air becomes liquid , then according to the different boiling point of liquid oxygen, and liquid nitrogen, second distillation in the fractionators, then get the high purity (99.6%) oxygen and more than 99.99% purity nitrogen and optional argon.
We are very proud of that we can manufacture such small capacity Cryogenic Oxygen Plant with a very good energy efficiency, due to our technology innovation!
Cryogenic Oxygen Plant specifications:
Cryogenic oxygen plant
Oxygen flow capacity: 30-180Nm3/h (120cylinders/day to 720cylinders/day)
Oxygen purity: 99.6%
Can fill oxygen cylinders
The oxygen can be used for cutting metal !
Standard Cryogenic Oxygen Plant:
ModelKZO-40KZO-50KZO-100KZO-150KZO-180
Oxygen capacity40Nm3/h50Nm3/h100Nm3/h150Nm3/h180Nm3/h
Oxygen purity99.6%99.6%99.6%99.6%99.6%
Operation pressure10-12bar10-12bar10-12bar10-12bar10-12bar
Start time/Warm up10hours10hours10hours10hours10hours
Power consumption76KW98KW175.5KW299.5KW299.5KW
It can fill (cylinders/day)160200400600720
Remark:
1. Above standard model Cryogenic Oxygen Plant is based on an altitude of
Tantalum tube Introduction:
ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...
Tantalum tube specifications:
1. Pure Tantalum Products
2. Purity: =99.95%, 99.99%
3. Dimension: Per customer's requirement;
4. Annealed
ShinTek can supply different types of Tantalum, including Tantalum Foils, Tantalum Sheets, Tantalum Plates, Tantalum Rods / Bars, Tantalum tube, Tantalum Forgings, Tantalum Ingots.
Molybdenum sheet Introduction:
ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...
Molybdenum sheet specifications:
1. Pure Molybdenum Products
2. Purity: =99.95%
3. Dimension: Per customer's requirement;
4. Annealed
ShinTek can supply different types of Molybdenum, including Molybdenum Foils, Molybdenum Sheets, Molybdenum Plates, Molybdenum Rods / Bars, Molybdenum Forgings, Molybdenum Ingots.
Niobium rod Introduction:
ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...
Niobium rod specifications:
1. Pure Niobium Products
2. Purity: =99.95%, 99.99%
3. Dimension: Per customer's requirement;
4. Annealed
ShinTek can supply different types of Niobium, including Niobium Foils, Niobium Sheets, Niobium Plates, Niobium Rods / Bars, Niobium tube, Niobium Forgings, Niobium Ingots.
Tungsten Rod Introduction:
ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...
Tungsten specifications:
1. Shape: rod, bar, customized by drawings; can supply semi-finished or finished Tungsten bar.
2. Dimension: Per drawings;
3. Density: 16.85-18.85g/cc per customer requirement;
4. Composition: Pure Tungsten or W-Ni-Fe, W-Ni-Cu, per customer's requirement;
5. Standard Spec: ASTM-B777
