Nitrogen Generator Introduction: The Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply and filling nitrogen cylinders. Our PSA Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. The patented vessel design enable our PSA Nitrogen Generator a lowest energy consumption and best efficiency. Nitrogen Generator specifications: 1. Nitrogen production capacity: 2~2000Nm3/h 2. Nitrogen purity: 90%, 99%, 99.5%, 99.9%, 99.99%, 99.999%, 99.9995%... 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Skid-mounted enable an easy installation and transportation. Nitrogen Generator Features: (1) The Nitrogen Generator is equipped with a stable Atlas Copco screw air compressor; (2) The Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Nitrogen Generator more reliable, and less maintenance jobs; (4) The Nitrogen Generator does not need foundation base; (5) The Nitrogen Generator does not need cooling water; (6) The Nitrogen Generator is skid-mounted, very easy to be transported and installed; (7) The Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (8) The Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (9) The Nitrogen Generator can be used for both onsite application and filling oxygen cylinders. (10) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.