Ultrasound machine, ultrasound probes , probe needle guided and probe repair service for most brands, like ge, philips, siemens, esaote, hitachi, aloka, toshiba, medison, honda, ultrasonix, fukuda, mindray, sonoscape, edan, siui, chison, welld.
World standard for medical ECG/Ultrasound transmission MHC Gels are the most widely used gel for diagnostics & therapeutic medical Ultrasound. The Gels are used for all procedures where a viscous gel is required. The same are available in the packing of 250 ml bottles & 5 kg Jar.
Description:One piece 3-lead ECG Cable with leadwires,Grabber,AHA Compatibility:This one-piece ECG cable is for use with the following ECG monitors: Abbott Medical: EX-50, Lifecare 5100, Lifecare 5200; Air Shields: HRRM-71-1/2, Porta-Fib I, II, III, System5, System6; ALT: 800, 800Plus, CX ATL Ultrasound, CX200, CX400, Apogee, HDI 9/200, Interspec Cardiology XL, Mark IV, Mark Vii, Ultramark 4/5/7/9; BCI Biochem International: 3101, 3404, 6100, 6200, 9100, 9200, Advisor, Autocorr; Carewell CPM-8000; Colin: BP308, BP408, CBM3000; Criticare: 504US, 504USP, 506, 507, 507E, 507ELC2, 507S, 508, 602-4B, 602-4USP, 1100, 2200, Poet 2, Scholar; Edan: M8, M8A, M8B, M9, M9A; GE Medical: Corometrics 556, Critikon 8100T, Dinamap 8700/9700; IVY Biomedical:101 (before 1989), 402, 700; LSI: LS5, 261; MDE: Escort 100, 101, 102, 200, 300, Prism, 360SL, 450SL, 521A, PortaPak 80, PortaPak 90/1000; Mindray: MEC 200, MEC 1000, MEC 1200; Physio Control (Medtronic): Lifepak 5, Lifepak 6, Lifepak 6S, Lifepak 7, Lifepak 8, Lifepak 9, Lifepak 10, Physio 1440/R, VSM-1ESF, VSM-2, VSM-2ESF, VSM-3; Nellcor: N-200, N-250, C-LOCK, N-1000, NPB-3900, NPB-4000; Nihon Kohden: BSM-8301A, 8302A, 8500A, 8502A, OEC-6102A (s/n>20156), 7102A, 8108A, OEC-6105A (s/n>20226), TEC 5531E, TEC-7100A, TEC-5200A (s/n>20421), TEC-7200A, 7300A; Novametrix: 902, 903, 910, Life Defense 1; Pace Tech: Minipack 300, Minipack 3000/3100, MiniMax 4000CL, Vitalmax 800 Plus, 2100, 2200, 4000, 4100, Vitalmax 4000CL, 4000, Modular/4100CL; Palco; Philips: M3921A A1, M3923A A1, M3925A A1, M3927A A3, M3929A A3; Pioneer (American Optical): 26125, 33167, 5260, 5330, Pulsar 4; PPG (Datamedix, Becton-Dickinson): Guardian 1001, N1001; Siemens: Sirecust 300DU, Sirecust 610, Sirecust 630, Sirecust DU, Cypress Ultrasound; Spacelabs Burdick: Medic 3, Medic 4, Medic 5, Medic 6, Series 500, Series 600, Series 900 90300/90400/90600/90700 Series, TEK-208/408/511/512/514/521, PCMS; Tektronix (Vitatek): 4045 Defib/208/400/500 Series; Welch Allyn: Propaq 100, Propaq 200 Series, Atlas Propaq Encore, Propaq CS, Ultra Smart, PIC 30, PIC 40, PIC 50; Zoll: M Series, E Series R Series, PD1200, PD1400, PD1600, PD1700, D900, PD2000, OEM: 8000-0025, 9500-0229 OEM Criticare: 852, 853, 1073/S (3 Leads Snap) 1073/P (3 Leads Clip) 854, 1075/S (5 Leads Snap) 1075/P (5 Leads Clip) Zoll: 8000-0025-02
Ultrasound gel is commonly used for the conducting Ultrasonic scanning. Our brand name is Byorin, we manufacture in our dedicated facility which is located near Mumbai. We use best polymers and moisturing agents for perfect gel consistency and to keep the body moisturing where ever it is applied we offer this prdouct in 250 ml bottles and 5 kgs jars, we can offer packing as per customers demand.
Sizes : Square steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
The test systems generate lightning impulse voltage (li, 1.2/50 s), chopping lightning impulse voltages (lic, front time 1.2 |¨¬s, front, crest or tail chopped), and switching impulse voltage (si, 250/2500 s) in accordance with iec 60060-1; as well as iec 60076-3 for transformers, and iec 62067, 60840 und 60502-1 for cables). Depending on specifications
Raw material gray iron250 nature casting (1)Material: gray iron 250 (2)Weight: 20kg¡ª85kg (3)Chemical composition: C: 3.0-3.3% si: 1.6-1.9% mn: 0.7-0.9% P:
Similar grade: aisi-d2, skd11, dc11, k100, din 1.2379 Chemical composition: Steel grade: gb cr12mo1v1 C Si Mn P S Cr Mo V 1.40-1.60
Basic parametersZenith 940 S&C - Universal Traveller Machine for Multilayer ProductionFor the production of:- Low sized concrete elements,Website:http://www.qgmblockmachine.com, e.g. pavers and masonry blocks in multilayer production- Special elements e.g. kerbstones and palisades in singlelayer productionTable production:Max. mould area: 1.240 mm x 1.000 mmMin. block height: 50 mmMax. block height: 650 mmMax. block height inmultilayer production: 250 mmMax. stacking height, incl. pallet: 640 mmFloor production:Max. mould area: 1.240 mm x 1.240 mmMin. block height: 250 mmMax. block height: 1.000 mmFeatures The multi talent 940 offers the widest scope of production possibilities of all concrete block and paver machines available on the world market.1. Smart operation :The self-explanatory, menu-driven touch panel makes the machine operation very easy. The production parameters for different mould types and production program are entered and saved by using the well-arranged menu masks. A quick Siemens SPS is used for internal signal processingAdvantage Our machines, with harmonic cooperation between mechanical, electrical and hydraulic machines functions, guarantee a reliable and high output production of concrete products.1. Use Germany Siemens PLC control system and Siemens Touch Screen, use Schneider and Omron relays and contactors: A. Siemens PLC, with great adaptability, guarantees the stability and reliability of the machine; B. Visualization touch screen, with easy operation; C. High-quality electrical components from Schneider and Omron;Use the scene Packing and transportation:Cooperative customer situation Welcome to visit us.
D(mm) deviation of diameter L(mm) Deviation of Length 16-20 +1.0 300-1500 +2 20-30 +1.5 250-1500 +2 30-45 +1.5 200-1500 +3 45-60 +2.0 250-1300 +3 60-100 +3.0 205-800 +3 Element Content(%) Mo í¦ 99.95 Al 0.001 Ca 0.003 Cr 0.005 Cu 0.001 Fe 0.005 Pb 0.002 Mg 0.001 Mn 0.001 Ni 0.001 Si 0.003 Sn 0.003 Ti 0.002 It is fine and close product with grey metallic luster.Density>10.2g/cm3. Used for glass industry.it can serve a long life in glass solution at1300íµ.Also used in the fields of rare earth industry.
Steel Grade: DIN- 1.2714 % C Si Mn P S Cr Mo Ni V 0,50 - 0,60 0,10 - 0,40 0,65 - 0,95
ITEM SPECIFICATION MODEL WDE-5018 CAPACITY 250-350KG/H SCREW TYPE TWIN SCREW SCREW L/D 18:1 SCREW SPEED 0-700 R/MIN SCREW DIAMETER 50 MM MAIN MOTOR POWER 30 KW HEATING TYPE ELECTRICAL PIPES HEATING ZONE THREE COOLING TYPE WATER HEATING PIPES POWER 6.4 KW DRIVE MOTOR BRAND SIEMENS BRAND ELECTRICAL COMPONENTSBRAND Schneider FREQUENCY INVERTERBRAND Schneider ELECTRICAL POWER SPECIFICATION 380V 50 HZ, 3P.
High performance cutting tools for sheet upto 4mm thickness, trimming dies, blanking dies for paper and plastic, shear blades for cutting light gauge material, thread rolling dies , drawing, deep drawing, pressure pads and highly wear-resistant plastic moulds. Similar grade: aisi-d3, jis-skd1, din 1.2080 Chemical composition: Steel grade: gb cr12 C, si, mn, p, s, cr 2.0 - 2, 30,
Model:SKLON-N models ultrasonic cell processors Easy to operate.Crushing capacity from 0.5ml to 1200ml . (sonicator,ultrasonic homogenizers,ultrasonic processor,ultrasonic cell crusher,ultrasonic cell disrupter) Parameters: Models Ultrasonic Frequency(KHZ) Maximum Output Power Duty Ratio(%) Optional Variable Amplitude Lever(¡é) Included with Machine Capacity per time(ml) electricity Supplyl(V) Temperature Control SKL150-IIN 20-25 150 W 1-99% 3 mm 6mm 10-100ml 220/110 No SKL250-IIN 20-25 250 W 1-99% 3 mm 6mm 10-200ml 220/110 No SKL650-IIN 20-25 650 W 1-99% 2,3,8,10,12,15mm 6mm 0.5-500ml 220/110 No SKL650-IIDN 20-25 650 W 1-99% 2,3,8,10,12,15mm 6mm 0.5-600ml 220/110 YES SKL1200-IIIN 19.5-20.5 1200 W 1-99% 15,25mm 20mm 50-1000ml 220/110 No SKL1200-IIIDN 19.5-20.5 1200 W 0.1-99.9% 15,25mm 20mm 50-1000ml 220 or 110 V YES SKL1800-IIDN 19.5-20.5 1800 W 0.1-99.9% 25,28mm 25mm 50-1200ml 220 or 110 V YES Ultrasonic Dispersing and Deagglomeration: The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices. Ultrasonic cavitation generates high shear forces that break particle agglomerates into single dispersed particles. Ultrasonic Emulsifying: Emulsions are dispersions of two or more immiscible liquids. Highly intensive ultrasound supplies the power needed to disperse a liquid phase (dispersed phase) in small droplets in a second phase (continuous phase). In the dispersing zone, imploding cavitation bubbles cause intensive shock waves in the surrounding liquid and result in the formation of liquid jets of high liquid velocity. At appropriate energy density levels, ultrasound can well achieve a mean droplet sizes below 1 micron (micro-emulsion). A wide range of intermediate and consumer products, such as cosmetics and skin lotions, pharmaceutical ointments, varnishes, paints and lubricants and fuels are based wholly or in part of emulsions. Ultrasonic Cell Disintegration This effect can be used for fermentation, digestion and other conversion processes of organic matter. After milling and grinding, ultrasonication makes more of the intra-cellular material e.g. starch as well as the cell wall debris available to the enzymes that convert starch into sugars. It does also increase the surface area exposed to the enzymes during liquefaction or saccharification. This does typically increase the speed and yield of yeast fermentation and other conversion processes, e.g. to boost the ethanol production from biomass.ultrasonic treatment can disintegrate fibrous, cellulosic material into fine particles and break the walls of the cell structure. This releases more of the intra-cellular material, such as starch or sugar into the liquid. In addition to that the cell wall material is being broken into small debris. Ultrasonic Cell Extraction The extraction of enzymes and proteins stored in cells and subcellular particles is an effective application of high-intensity ultrasound, as the extraction of organic compounds contained within the body of plants and seeds by a solvent can be significantly improved. Ultrasound has a potential benefit in the extraction and isolation of novel potentially bioactive components, e.g. from non-utilized by-product streams formed in current processes.
Product Introduction: The machine is used for producing parallel paper barrel automatically. It consists of paper stand, gluing device (automatic cycle system with gear pump), paper cutting device, barrel forming device, cutting device, discharging device. It is controlled by Siemens PLC, Touching panel and Delta inverter. Model: SANPT250-650 Size of jumbo paper roll: 800mm/1000mm/1200mmx1300mm (Width*Dia.) Paper Barrel length: 800mm/1000mm/1200mm Paper barrel inner diameter: 250-650mm Paper barrel thickness: Normal 2-5mm. Paper grammage: 200-550gsm Gluing method: single side gluing Inline cutter: 3pcs Production speed: 5-7pcs/min Power: 7KW/380V/50HZ/3Phases Weight: ~1300kg Dimension: 3200X2600x1500mm
Commodity: USED RAILS (ISRI CODE R50-R65) Chemical composition: International Standards as follows: R50 51,67 kg/m GOST 7173-75 C: 0.67- 0.8%; Mn: 0,75 - 1.05 %,Si: 0.13 - 0.28 %; P: max. 0.035 %;S: max. 0.045 %; Ar: max. 0.15 % R65 64.72 kg/m GOST 8165-75 C: 0.6 - 0.82 %; n: 0.75 - 1.05 % ; Si: 0.13 - 0.28 %; P: max. 0.035 %; S: max. 0.045 %; Ar: max. 0.15 Specification: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75) 2.7 Length of commodity: CUT TO A DIMENSION OF 1.5m (m=meters) AS MAXIMUM, Or as the buyer requests, preferably the length is 12.5 meters, as is the original length of the product. Origin: Middle East , Russia , France Quantity Total: 6,000,000 MT Quantity per Month 500,000 MT per Month Contract Period: One year, 12 Months, with Extension Performance Bond: 2% Insurance 110% of the CIF Value for Shipment Price: 250 + 5 USD / MT Payment term: 100% DLC AT SIGHT / Documentary Letter of Credit, LC should covering at least 55% of full Deal value. payment against presentation of shipping documents at Loading port Payment method Irrevocable, Non-Transferable, Divisible & revolving DLC / Documentary Letter of Credit Payments conditions the Full Payment at Loading port, Against of Shipment Policy of Loading, Invoice, Origin Certificate, SGS Insurance Certificate. Inspection: BY SGS INSPECTION company, or Bureau Veritas, shall at the port of loading and port discharge, confirm weight and that the product conforms to the Contract specifications : skype = smartxLLC Delivery Time: within 30 Days after Financial Instrument. Delivery Terms: CIF - Recommended terms (according to Inco-terms 2000) - Buyer can visit the seller yart and verify the products.
Performance Characteristics: Widely used cold work mould steel, with good quench-hardening ability, good wear resistance , as well hot workability. Applications: Making efficient blanking mould, stamping mould, all kinds of scissors , cold shearing , drilling bushing , gauge, wortle, coining die, thread rolling die, screw thread rolling die, cold extrusion dies . Chemical Composition : C 2.00¡«2.30 Si 0.40 Mn 0.40 S 0.030 P 0.030 Cr 11.50¡«13.00 Ni 0.25 Cu 0.30 Co 1.00 Heat treatment standard: (1) Quenching, 950 ~ 1000 centigrade cold oil; (2) Quenching 980 centigrade, cold oil, 180 centigrade tempering 2 hours Annealing temperature: 800-850 Centigrade. Annealing hardness: 248 HB Max. Destressing temperature: 650 Centigrade Approx. Hot forming temperature: 1050-850 Centigrade. Quenching temperature: 940-970 Centigrade. Hardening media: oil quenching, salt bath 220-250 Centigrade or 500-550 Centigrade, air or compressed air. Quenching hardness: 63-65 HRC. Delivery condition : Annealing. Under the client's requirement
Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
DreamBox 500S(DM500S Satellite Receiver) Description: The Dreambox DM 500-Si is the first Linux based DVB Receiver. This receiver runs on open-source software developed by hundreds of developers around the world. This is the ultimate machine. It has many differnet skins that can be applied to make the user experience completely customizable. If you're looking for a VERY powerful Dreambox DM 500-Si, and something to have fun on, this is Dreambox DM 500-Si for you. This unit has a great EPG and supports Personal Video Recording. You can attach this unit to your Windows based network at home and record your favourite tv programs right onto your hard drive. DreamBox DM 500-Si : The DM500Si is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader. 250 MHz IBM PowerPC Processor (350 Mips) 2 LED status Linux Operating System Full automatic service scan Supports directly bouquet-lists (indirect unlimited) Supports multiple LNB-Switching control (supports DiSEqC) 1 x Smartcard-Reader Unlimited channel lists for TV/Radio SPDI/F nterface for digital bit stream out (AC-3 / DTS) MPEG2 Hardware decoding Channel-change time < 1 second Fully adaptable OSD in many languages (skin-support) 100Mbit full duplex Ethernet Interface Supports EPG (electronic program guide) 1 x Scart-interfaces (fully controlled by software) Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL and NTSC Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS,RGB,S-VHS over OSD selectable DBS-Tuner: Frequency Range 950 .. 2150 MHz Signal Level - 65 dBm .. - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Ethernet: 100 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming LNB Power and polarisation: LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Serielle Interface RS 232: Typ RS232 bidirectional Bit rate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Power consumption: < 10W / 12V Input voltage: DC12V,alternating acurrent +/- 15% Extern power supply: Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 1A Others: Ambient Temperature +15¿¬pC...+35¿¬pC Humidity < 80% Package Content: * DreamBox DM 500-S Satellite Receiver * AC Charger * Remote Control * AV Cable * User Manual.
The PA035XUJ is a 3.5 inch diagonal a-Si TFT-LCD display panel product from Prime View International Co., Ltd. (hereafter called PVI), with an integral CCFL backlight system, without backlight driver, without touch screen. It features an operating temperature range of 0 ~ 60C , a storage temperature range of -20 ~ 70C .This PVI TFT-LCD is a 3.5 inch with Consumer Lcd Display, it have LCD Controller, Backlight Cable and Tft Color Screen. PA035XUJ supports display 480 234 with aspect ratio of 7:5 (W:H), whose pixels are arranged in RGB Delta. As for mechanical detail, it features active area of 72(W) 50.544(H) mm, outline size of 83.7(W) 8.6(H) 6.6(D) mm, viewing area size of 74.0(W) 52.54(H) mm, with surface treament of Antiglare, net weight of 56.0�±5.0g. As a TN, Normally White, Transmissive LCM product, PA035XUJ can provides 250 cd/m display brightness 350:1 transimissive contrast ratio, 50/50/15/35 (Typ.)(CR10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 15/25 (Typ.)(Tr/Td) ms., thus presenting a palette of Full color colors. This product adopted 1 pcs CCFL as it's backlight systerm which was placed as Edge light type (Bottom side) and have a working life time of 20K hours, external backlight driver is additionally needed. PA035XUJ utilizes TFT Specific Analog RGB as it's signal inputting systerm, which connected by 28 pins FPC with power supply voltage of 3.3/3.3/5.0/17.0/-12.0V (Typ.)(VCC/VDD/AVDD2/VGH/VGL). It's typical vertical frame rate (Fv) is 60Hz.
