Ivex-M Ltd.

Circular saws
Cutters
Cutter heads
Shank cutters
And many others by customer’s request.

Technical Data K5-320 K5-400
Planer
Max. Planer Width mm 320 400
Work Table Length mm 1560 1920
Max. Planing Thickness mm 4 4
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Cutter Shaft Dia. mm 86 86
El. Motor Power kW 2.2 3
Thicknesser
Max. Planer Width mm 320 400
Work Table Length mm 550 690
Max. Planing Thickness mm 180 220
Max. Planing Heigh mm 3 3
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Feeds m/min 8 8
El. Motor Power kW 2.2 3
Boring Device
Table Dimensions mm 400/250 (500) 400/250 (500)
Longitudinal Travel mm 100 (150) 100 (150)
Cross Travel mm 100 (150) 100 (150)
Vertical Travel mm 100 (150) 100 (150)
Max. Drill Dia. mm 16 16
Drill Speed R/min 5200 5200
Spindel Moulder
Spindle Diameter mm 30 (50) 30 (50)
Spindle Speed R/min. 6000 6000
Vertical Stroke of Spindle mm 130 130
Max.Ttool Diameter mm 170 170
Dimensions Of Worktable mm 850 / 450 850 / 450
El. Motor Power kW 2.2 2.2
Circular Saw
Saw Blade Diameter mm 300 300
Saw Blade Speed R/min. 3700 3700
Max. Depth Of Cut mm 85 85
Dimensions Of Worktable mm 850 / 450 850 / 450
Spindle Dia. mm 30 30
El. Motor Power kW 2.2 2.2 or 3
Tenoning carriage
Dimensions of worktable mm 450/750 450/750
Machine dimensions
Net weight of the machine Kg 540 580
Length mm 1600 2000
Width mm 1140 1700
Height mm 1000 1100

Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401
Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600
“T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18
Table swivel – left and right (º) 45 45 45 45 45
Longitudinal table travel
- manual mm 820 950 1000
(1250)* 1150
(1250)* 1250
- automatic mm 800 930 980
(1230)* 1130
(1230)* 1230
Cross table travel
- manual mm 280 320 360 360 360
- automatic mm 260 300 340 340 340
Vertical table travel
- manual mm 410 410 460 460 460
- automatic mm 390 390 440 440 440
Max. Distance from table top
to spindle axis mm 440 440 490 490 490
Spindle nose taper ISO 40 40 50 50 50
Number of spindle speeds 18 18 18 18 18
Spindle speed range rpm 40-2000
(50-2500)* 40-2000
(50-2500)* 32-1600
(40-2000)* 32-1600
(40-2000)* 32-1600
(40-2000)*
Number of table feeds 18 18 18 18 18
Table feed rate
- x,y mm/min 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)**
- z mm/min 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)**
Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040
Main motor power kW 4 5.5 7.5 7.5 7.5
Feed motor power kW 1.5 1.5 2.2 2.2 2.2
Machine weight kg 1975 2025 2850 2900 2925

* - option

Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds

Drilling capacity in:
- Concrete / steel / non-ferrous metals / wood: 22 / 13 / 22 / 30 mm
- Core cutter (TCT cutter only) in masonry up to: 60 mm
No load rpm: 0-1300 min–1
No load impact rate: 6200 min–1
Weight: 2.6 kg
Power input: 650 W.

Technical data
Type Rated output Basic supply Duty cycle Parameters at rated output starting characteristics weight
P1 U S Nn In Cosφ Is Ms Mmax
Kw Hp V - Min-1 A - A Nm Nm Kg
2p=2
A90ll-2ksr 5.5 7.5 230/400 S6-40% 2900 15.7/9.1 0.88 23 21 28.4 25.5
A90lx-2ksr 5.5 7.5 230/400 S1 2800 19.6/11.3 0.93 53 30 38
A100lk-2ksr 5.5 7.5 230/400 S6-40% 2820 11.5/6.6 0.82 39 25 30 29.0
2p=4
A90ll-4ksr 4.2 5.6 3x400 S6-40% 1250 6.5 0.92 22 39 39.6 26.0
A100lk-4ksr 4.0 5.6 230/400 S6-40% 1350 10.6/6 0.88 22 30 34 31.0
A100lx-4ksr
A100lx-4kr 8.0 10.7 230/400 S6-40% 1350 23.4/13.5 0.85 47 70 78 39.0
A100l-4ksr
A100l-4ksrs 5.5 7.5 230/400 S6-40% 1350 16/9.3 0.86 35 52 58 35.0
A112m-4ksr 4.8 6.4 400/690 S1 1420 8/4.6 0.86 26 62 73 41.0
The electric motors can also be produced at different basic supply voltages and frequency.


Three phase asynchronous electric motor with built-in electric-magnet brake
Technical data
Type Rated
Output Basic
Supply
Voltage Duty
Cycle Parameters at
Rated output Starting
Characteristics Rated brake
(Stopping) torque Rated output of
Brake electric
Magnet Basic
Supply
Voltage of brake electric
Magnet
P1 U S Nn In Cosφ Is Ms Mmax
Kw Hp V - Min-1 A - A Nm Nm Nm - -
A90lx-2kslb 5.5 7.5 400v/50hz S1 continuous 2800 11.3 0.93 42 38 42 10 50w 98v

M...EK
Wire rope hoist with monorail trolley and low headroom M...ED
Wire rope hoist with double-rail trolley
Capacity 1000 - 16 000 kg 3200 - 32 000 kg
(special executions - up to 100 000 kg)
Reeving 2/1; 4/1; 4/2 2/1; 4/1; 4/2
(special executions - 6/1; 8/2; 2x4/1)
Lifting height 5,5 - 40 m 5,5 - 44 m
Lifting speed 2,5 - 12 m/min
(special executions - up to 16 m/min)
speed ratio - 1:6; 1:4 1, 2 - 12 m/min
(special executions - 16 m/min)
speed ratio - 1:4; 1:6
Troley speed 12, 15, 20, 24, 30, 38 m/min
speed ratio - 1:4; 1:3 12, 16, 20, 25 m/min
speed ratio - 1:4; 1:3
Geuge 1000 - 2800

KT20H
Load-lifting capacity: 1000, 2000 and 2500 kg
Height of lifting: 115 mm
Length of the forks: from 750 up to 1800 mm
Width of the forks: 540, 685 mm

# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.

# Special callipers 3-point vernier calliper;
# 5-point vernier calliper;
# Marking-off vernier calliper;
# Weld seam gauge;
# Other types.

# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.

# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.

# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm

# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.

# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.

# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.

# Smooth rings Reference rings;
# Setting rings
Range: 6-150 mm.

# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.

# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°

# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.

Power Selections
38HP Gas
35HP Diesel
25HP 3Ph Electric

Max. Log Diameter 36"
Max. Width of Cut 28"
Wide - 34"
Max. Depth of Cut 10-1/2"
Max. Length of Cut 21'
Max. Length of Cut w/ Bed Extensions 45'
Bed Extensions 6', 12', or 24' Bed Extensions
Max. Log Weight 4,400 lbs
Sawhead Forward/Reverse
High-Output 12V Electric Power Feed

Sawhead Up/Down Electric with Accuset2 Setworks
Side Supports
4 Hydraulic Side Supports

Log Clamps 1 Hydraulic
Bed Leveling Feet 6 Adjustable Outriggers
Trailer Package Standard
Blade Lubrication 5 Gal. Water Tank with Automatic Flow