Ferric alum, also called as Aluminum Sulphate or Ferric Ammonium Sulphate or Iron Alum and has a melting point of 100�°C. Ferric alum is basically a less pure form of Aluminum Sulphate. When Bauxite and Sulphur Acid are cooked at a certain condition, leading to the formulation of Ferric Alum. It can also be prepared by the crystallization of Ferric Sulphate and Ammonium Sulphate. Its appearance is light violet in color and comes in various forms such as Powder, Lumps, Slabs and Crystal. It is also available in liquid form. Alum is a weak oxidizing agent and being paramagnetic and acidic in nature, itâ??s toxic towards microorganisms. Alum is ideal to prevent rust and been highly soluble in water helps in algae controlling too. Alum can be used in various industries from Chemical to Textile Industry, Automobile Industry to Iron and Steel Industry and even as an etching agent in production of electronic items. Alum can also be applied in several Laboratory such as of Biochemical Analysis, Organic Synthesis, Agri Products and Petrochemicals. Lower grades of alum are used in Paper Industry for loading and sizing purposes. Alum is a primary coagulant for waste water treatment. Jyoti Chemical supplied Alum is free from impurities and is processed through superior quality of raw ingredients. We offer you exactly as per your specified demand of your industrialized sector with the accurate chemical composition. Our offered product is strictly as per the norms set by the industry and its application. Jyoti Chemical from more than two decades provides you with the best quality of Ferric Alum at the lowest possible price, which are available in Powder, Lumps, Slabs and Crystal.
Ferric alum, also called as Aluminum Sulphate or Ferric Ammonium Sulphate or Iron Alum and has a melting point of 100�°C. Ferric alum is basically a less pure form of Aluminum Sulphate. When Bauxite and Sulphur Acid are cooked at a certain condition, leading to the formulation of Ferric Alum. It can also be prepared by the crystallization of Ferric Sulphate and Ammonium Sulphate. Its appearance is light violet in color and comes in various forms such as Powder, Lumps, Slabs and Crystal. It is also available in liquid form. Alum is a weak oxidizing agent and being paramagnetic and acidic in nature, itâ??s toxic towards microorganisms. Alum is ideal to prevent rust and been highly soluble in water helps in algae controlling too. Alum can be used in various industries from Chemical to Textile Industry, Automobile Industry to Iron and Steel Industry and even as an etching agent in production of electronic items. Alum can also be applied in several Laboratory such as of Biochemical Analysis, Organic Synthesis, Agri Products and Petrochemicals. Lower grades of alum are used in Paper Industry for loading and sizing purposes. Alum is a primary coagulant for waste water treatment. Jyoti Chemical supplied Alum is free from impurities and is processed through superior quality of raw ingredients. We offer you exactly as per your specified demand of your industrialized sector with the accurate chemical composition. Our offered product is strictly as per the norms set by the industry and its application. Jyoti Chemical from more than two decades provides you with the best quality of Ferric Alum at the lowest possible price, which are available in Powder, Lumps, Slabs and Crystal.
Ferric alum, also called as Aluminum Sulphate or Ferric Ammonium Sulphate or Iron Alum and has a melting point of 100�°C. Ferric alum is basically a less pure form of Aluminum Sulphate. When Bauxite and Sulphur Acid are cooked at a certain condition, leading to the formulation of Ferric Alum. It can also be prepared by the crystallization of Ferric Sulphate and Ammonium Sulphate. Its appearance is light violet in color and comes in various forms such as Powder, Lumps, Slabs and Crystal. It is also available in liquid form. Alum is a weak oxidizing agent and being paramagnetic and acidic in nature, itâ??s toxic towards microorganisms. Alum is ideal to prevent rust and been highly soluble in water helps in algae controlling too. Alum can be used in various industries from Chemical to Textile Industry, Automobile Industry to Iron and Steel Industry and even as an etching agent in production of electronic items. Alum can also be applied in several Laboratory such as of Biochemical Analysis, Organic Synthesis, Agri Products and Petrochemicals. Lower grades of alum are used in Paper Industry for loading and sizing purposes. Alum is a primary coagulant for waste water treatment. Jyoti Chemical supplied Alum is free from impurities and is processed through superior quality of raw ingredients. We offer you exactly as per your specified demand of your industrialized sector with the accurate chemical composition. Our offered product is strictly as per the norms set by the industry and its application. Jyoti Chemical from more than two decades provides you with the best quality of Ferric Alum at the lowest possible price, which are available in Powder, Lumps, Slabs and Crystal.
Ferric alum, also called as Aluminum Sulphate or Ferric Ammonium Sulphate or Iron Alum and has a melting point of 100�°C. Ferric alum is basically a less pure form of aluminum sulphate. When bauxite and Sulphur acid are cooked at a certain condition, leading to the formulation of ferric alum. It can also be prepared by the crystallization of ferric sulphate and ammonium sulphate. Its appearance is light violet in color and comes in various forms such as Powder, Lumps, Slabs and Crystal. It is also available in liquid form. Alum is a weak oxidizing agent and being paramagnetic and acidic in nature, itâ??s toxic towards microorganisms. Alum is ideal to prevent rust and been highly soluble in water helps in algae controlling too. Alum can be used in various industries from Chemical to Textile industry, Automobile industry to Iron and steel industry and even as an etching agent in production of electronic items. Alum can also be applied in several Laboratory such as of biochemical analysis, organic synthesis, Agri products and petrochemicals. Lower grades of alum are used in Paper industry for loading and sizing purposes. Alum is a primary coagulant for waste water treatment. Jyoti Chemical supplied alum is free from impurities and is processed through superior quality of raw ingredients. We offer you exactly as per your specified demand of your industrialized sector with the accurate chemical composition. Our offered product is strictly as per the norms set by the industry and its application. Jyoti Chemical from more than two decades provides you with the best quality of Ferric Alum at the lowest possible price, which are available in Powder, Lumps, Slabs and Crystal.
Product Data Sheet GENERAL DESCRIPTION An easy-to-use, water-based primer specifically formulated to �¢??lock-out�¢?? corrosion on a wide range of metals. Applied correctly, is guaranteed for years. USES Suitable on sheet metal, castings, wrought iron, TNT Bar, steel Bar and steelwork. This product is not recommended for automotive use. COLOURS Available in natural green. SIZES Available in 4 litre,10 litre and 20 litre COVERAGE Up to 14 square metres per litre depending upon surface porosity and application method. APPLICATION Roller, brush, dip or airless spray. Provide adequate ventilation during use. DRYING TIMES Touch Dry Time - 20 minutes. Recoat Dry Time - 2 hours. Drying times refer to normal conditions (30�?�°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary. DO NOT USE IN TEMPERATURES BELOW 10'c OR ABOVE 45C. DANGEROUS GOODS CLASSIFICATION Not classified as Dangerous Goods. SURFACE PREPERATION Previously Painted Surfaces : Scrape off loose and flaking paint and make sure the remainder is firmly attached. Sand glossy surfaces and enamels thoroughly and wipe clean. Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer. TNT BAR,STEEL BAR AND IRON: Remove all grease, dirt and other surface contaminants.Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust with. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties. Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc. The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments. Good deep-drawing and welding properties, easy to process into various shapes and sizes of products. Smooth surface, easy to perform surface treatment and painting. Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc. Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields. 3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity. Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability. Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities. The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil. For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil. Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
ShoHan Japanese Powder Hair Color has a unique water activated formulae that does not require ammonia nor peroxide The product does not contain any heavy metals or harmful ingredients that damages the hair cuticle or makes the hair dry unmanageable or causes hair fall Perfectly safe to use unisex and long lasting hair color that makes an impression everywhere you go 100 Grey coverage 100 Vegan and Cruelty Free Product GMP certified ISO and Halal certified product Available in 23 Vibrant Shades ShoHan Japanese Powder Hair Color has the following features No Ammonia No ammonia so no harsh smell No Peroxide No peroxide so no harm to hair root and shoot No bad odour Curling Iron Safe No affect to color by heat from curling irons etc Long Lasting Beautiful truetolife color which lasts up till 45 days EconomicalPrevents waste Use what quantity is required and rest can be used in future again Built In Conditioner Has built in conditioner to leave your hair conditioned and shining Does Not Stain Can be easily removed from skin and coloured hair will not dirty collars or pillows No Bad Odour Does not contain ammonia does not require peroxide for application so no bad odour Pleasant smell during application and post application Water Activated Simply Add Water mix and apply only hair color type that does not require developer or peroxide for application Unisex Can be used by any gender
Product Description Net Weight 1000 gr Ingredients Tuna galangal ginger chili lemongrass cumin coriander pepper onion garlic salt tamarind coconut milk Variant Flavor Original Spicy Shredded Tuna Fish is made from fresh tuna and natural and fresh spices such as galangal ginger chili lemongrass cumin coriander pepper shallots garlic salt tamarind coconut milk to produce the best quality taste and evocative aroma appetite Shredded fish can be taken anywhere when traveling and is definitely more suitable for breakfast mixed with porridge Nutrient content shredded fish The nutritional content of shredded fish below is based on RI Ministry of Health data Indonesian Food Composition Table TKPI Type of food Processed New Code GP054 Old Code Group Fish etc Species Anabas testudineus Genus Anabas Family Anabantidae English name Shredded fish Composition content of nutrition per 100 grams shredded fish with EDD 100 Edible Weight as follows in alphabetical order Please click on the blue nutritionvitaminsminerals to see the benefits and food ingredients that contain these nutrients Ash Ash 101 grams Water Water 64 grams Iron Fe Ferrum Iron Carotenes Carotenes Energy 435 Calories Phosphorus P Phosphorus Potassium K Potassium Calcium Ca Calcium Carbohydrates CHO 361 grams Total carotene Re Fat Fat 202 grams Sodium Na Sodium Niacin C6H5NO2 Niacin 243 milligrams Protein 272 grams Retinol vit A C20H30O Riboflavin vitamin B2 080 milligrams Zinc Zn Zinc Fiber Fiber Copper Cu Copper Thiamine vitamin B1 Vitamin C
One of the healthiest herbal drinks is the Moringa Ginger Infusion, which we present to you. A revitalizing cup of tea with many health advantages can be made by combining the pungent and spicy flavour of ginger with the bittersweet flavour of moringa. Ginger may boost the natural refreshing flavour of moringa and lessen its harshness. The moringa ginger herbal tea will relieve headaches and migraines, lower cholesterol, alleviate gut and stomach issues, prevent liver disease, and lessen malignant cells. Consume regular doses of moringa ginger infusion to maintain your health! Packaging type: 2g Tea Bags 100Pcs in a box Moringa Nutritional Facts Calories 28.70. Protein 2.74 grams Fat 0.29 grams Carbohydrates 3.81 grams Fiber 2.44 grams Vitamin B1 0.17 milligrams Vitamin C 2.02 milligrams Vitamin E 9.70 milligrams Calcium 182.77 milligrams Magnesium 29.60 milligrams Potassium 145.80 milligrams Iron 3.11 milligrams Ginger Nutritional Facts Energy 80 Kcal Carbohydrates 17.77 g Protein 1.82 g Total Fat 0.75 g Cholesterol 0 mg Dietary Fiber 2.0 g Folates 11 µg Niacin 0.750 mg Pantothenic acid 0.203 mg Pyridoxine 0.160 mg Vitamin A 0 IU Vitamin C 5 mg Vitamin E 0.26 mg Vitamin K 0.1 �µg Sodium 13 mg Potassium 415 mg Calcium 16 mg Copper 0.226 mg Iron 0.60 mg Magnesium 43 mg Manganese 0.229 mg Phosphorus 34 mg Zinc 0.34 mg Bulk Packaging Packaging Package Size Jute Bags/PP Bags 25kg/50kg/Customize Packaging Retail Packaging Paper Pouches 100g,250g,500g/Customize Packaging
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties. Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc. The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments. Good deep-drawing and welding properties, easy to process into various shapes and sizes of products. Smooth surface, easy to perform surface treatment and painting. Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc. Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields. 3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity. Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability. Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities. The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil. For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil. Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature) (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 5% 95% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25 C, 3000 cycles (80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45 C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature(%) 3%/month, 25 C 17 High temperature self-discharge rate (%) 5%/month, 45 C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2) 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 595% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25°C, 3000 cycles 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45°C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature 3%/month, 25°C 17 High temperature self-discharge rate 5%/month, 45°C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V discharged at 0.2C constant current to 2.5V at -20±2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Brief Introductions: Type: Non-standard Bond: Brazed Application: Machining Steel Specification: Customized Packages: Hard carton Delivery Time: 15 workdays by express grinding wheel vacuum brazed diamond blades adopt vacuum brazing technique, the toughness of diamond can be exploited fully, every diamond grit receives reasonable strength, making the diamond blades sharp and durable. Vacuum brazed blades are suitable for cutting granite, marble, aluminum, Cast Iron, copper pipe, corrugated Roofing, drywall, ductile iron pipe, fire door, masonry, steel metal, stucco, wood etc. Advantages of Brazed grinding wheel Higher quality process than sintered or laser welded wheel Long life High efficiency Single layer of fully exposed diamond fused with nickel at high temperatures and sharp cutting No pollution, low noise, never need dressing Service: Detailed Specifications can be customized Provide after-sales service. Technical support on usage. Return and exchange of products for non-human reasons. a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, is tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries. The 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. 10/8 E-M Slurry Pumps Applications: Iron Ore Dressing Plant, Copper Concentration Plant, Gold Mine Concentration Plant, Molybdenum Concentration Plant, Potash Fertilizer Plant, Other Mineral Processing Plants, Alumina Industry, Coal Washery, Power Plant, Sand Excavation, Building Material Industry, Chemical Industries, Other industries. Pump Design Features Modular design for ease of maintenance. Medium duty one piece frame base with lifting points for easy maintenance. Standard ductile iron outer casings for higher working pressures and incorporating lifting points. Standard or advanced bearing assembly improves reliability to extend bearing life reduce lubrication costs. Shaft sealing for increased reliability, stuffing box, expeller, elevated seal or mechanical seal options available. Standard or advanced impeller design options available. Allows ease of fitting multiple liner materials, including hard metal, thick section rubber or polyurethane. Single piece sleeve for stuffing box sealing, lowers stock holding and maintenance. Multi-purpose design allows for reduced inventory requirements and interchangeability. Belt guards allows for ease of maintenance and inspection of belt condition.
What is a fiber laser cutting machine A fiber laser cutting machine is a high quality, high speed, high precision and high efficiency fully automatic CNC laser metal cutting system, designed for all kinds of metal processing, it is your good partner for metal processing. Equipped with different laser power (1000W to 40,000W) to cut carbon steel, stainless steel, electrical steel, tool steel, galvanized steel, mild steel, aluminized zinc plate, aluminum alloy, aluminum, titanium alloy and other metal sheets and metal pipes, brass, copper, iron and many more metals of different thicknesses. Our fiber laser cutting machines are capable of cutting steel, brass, aluminum and stainless steel without the fear of back reflection damaging the machine. By using these fiber laser machines, you will reduce your maintenance needs and significantly lower your operating costs. Metal fabrication shops and companies that manufacture custom metal parts can use our fiber laser cutting machines to dramatically increase productivity. Find the right fiber laser cutting machine We offer 1000W, 1500W, 2000W, 2500W and 3000W laser power options. These fiber laser machines have a maximum cutting speed of 35 m/min, enabling fast completion of jobs with high precision. WID laser also offers full-cover fiber laser cutting machines to eliminate light pollution. Applications Used in manufacturing industries such as electronics, automotive, aviation, aerospace, auto parts, subway parts, electrical appliances, textile machinery, precision parts, engineering machinery, food machinery, shipbuilding, household appliances, metallurgical equipment, tool processing, elevators, hardware crafts, metal crafts, metal gifts, metal decorations, advertising, kitchenware, metal out-processing, etc. Cutting material It can cut carbon steel, stainless steel, silicon steel, alloy steel, spring steel, low carbon steel, aluminum, galvanized steel, tool steel, aluminized zinc plate, copper, brass, pickled plate, titanium, silver, gold, iron, alloy, and other metal plates and tubes. The more you can click here.
Ningxia Huiheng activated carbon Sales Co. Ltd. Anthracite under the conditions of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages and then made coke, this process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Due to its high mechanical strength, porous structure, good adsorption performance, strong ability to cut pollution, fast filtration speed, long service life and so on. The utility model is suitable for domestic water and industrial water treatment devices. 1.High mechanical strength, broken rate and wear rate of less than 2% (percent by mass). 2. Fixed carbon is greater than 80%, mud content is less than 1.5, the use of long cycle. 3. Product appearance of good gloss, moisture is less than 2.5%, porosity greater than 75%, filtration speed. 4. Chemical stability, non-toxic substances. In the general acidic, alkaline, neutral water are not dissolved. 5. Particles uniform, large gap, low resistance, porous structure is reasonable, good adsorption performance, strong ability to intercept sewage.
Ningxia Huiheng activated carbon Sales Co. Ltd. Anthracite under the conditions of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages and then made coke, this process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Due to its high mechanical strength, porous structure, good adsorption performance, strong ability to cut pollution, fast filtration speed, long service life and so on. The utility model is suitable for domestic water and industrial water treatment devices. 1.High mechanical strength, broken rate and wear rate of less than 2% (percent by mass). 2. Fixed carbon is greater than 80%, mud content is less than 1.5, the use of long cycle. 3. Product appearance of good gloss, moisture is less than 2.5%, porosity greater than 75%, filtration speed. 4. Chemical stability, non-toxic substances. In the general acidic, alkaline, neutral water are not dissolved. 5. Particles uniform, large gap, low resistance, porous structure is reasonable, good adsorption performance, strong ability to intercept sewage.
"In a 100 gram serving, the seeds are calorie-dense (574 kcal) and an excellent source (20% of the Daily Value, DV, and higher) of protein, dietary fiber, niacin, iron, zinc, manganese, magnesium and phosphorus (table). The seeds are a good source (10 19% DV) of riboflavin, folate, pantothenic acid, sodium and potassium (table). pumpkin and squash seed kernels, roasted, with salt added Nutritional value per 100 g (3.5 oz) Energy 2,401 kJ (574 kcal) Carbohydrates 14.71 g Sugars 1.29 g Dietary fiber 6.5 g Fat 49.05 g Saturated 8.544 g Monounsaturated 15.734 Polyunsaturated 19.856 Protein 29.84 g Vitamins (%DV)â? Qty Thiamine (B1) (6%) 0.07 mg Riboflavin (B2) (13%) 0.15 mg Niacin (B3) (30%) 4.43 mg Pantothenic acid (B5) (11%) 0.57 mg Vitamin B6 (8%) 0.1 mg Folate (B9) (14%) 57 �¼g Vitamin C (8%) 6.5 mg Vitamin E (4%) 0.56 mg Vitamin K (4%) 4.5 g Minerals Calcium (5%) 52 mg Iron (62%) 8.07 mg Magnesium (155%) 550 mg Manganese (214%) 4.49 mg Phosphorus (168%) 1174 mg Potassium (17%) 788 mg Sodium (17%) 256 mg Zinc (80%) 7.64 mg"
Semi Coke also called Lantan, it is made through burning up the good quality Jurassic coal produced in Shenfu, dong sheng Coal field. structured as a block.General more than 3mm size, the color appears light black. As the semi coke has features of high fixed carbon, high resistance, high chemical activity, low ash, low aluminium,low sulphur, low phosphorus, can instead of metallurgical coke, smoke free block and be used in the production of calcium carbide, ferro alloys, ferro silicon, silicon carbide, silicon metal, silicon manganese, fertilizer,etc. It becomes an irreplaceable carbon materials, it is widely used in chemical, metallurgical, smelting, and gas making industry. The lam coke can replace coke (met coke) and widely used in chemical industry, smelting, gas industry. The semi coke is using the fine quality fired Jurassic coal from Shenfu coalfield, as a new type of carbon materials, semi-coke with its high fixed carbon, high resistivity, high chemical activity, low ash, low sulphur and low phosphorus, is widely used among the Chinese smelting factories. In industry fields it is mainly used as additive ( carburetant, reducer, jetting material of blast furnace and so on) of iron manufacturing, manufacturing iron alloy calcium carbide and so on. It can also be used in chemical fertilizer factory to produce gas and cement and so on.
Model HQ15-A5 HQ15-A100 Rated primary current 5A AC 100A AC Output Voltage 10 mV AC/A 1mV AC/A Maximum input current 50A AC (Continuous) 130A AC (Continuous) (45-66Hz,Ambient temp.50C) Amplitude accuracy ±0.3%RD ±0.02%FS (10%-100%I1n),(45Hz- 66Hz) Phase accuracy ±2 (10%-100%I1n)(45Hz-5kHZ) The amplitude frequency characteristic ±0.1% (45Hz-5kHZ)(Deviation accuracy) Conductor impact ±0.5 (Off-center) The influence of external lectromagnetic fields 0.1A (In AC 400A / m electromagnetic fields) Temperature coefficient ±0.02%/C of the reading data Dielectric strength 3000 V AC rms/Continue 15 seconds(Circuits-iron core, iron core-shell) The maximum rated voltage 300V AC rms Applicable standards Safety: EN61010-2-032:2002,300V CAT III, Contamination II EMC: EN61326:1997+A1:1998+A2:2001+A3:2003(Class A) Mechanical parameters Measurable conductor diameter Max.15mm Cable length About 3m Dimension (W x H x D) About 46135 21 (Excluding protruding parts) Weight About 230g Environmental conditions Operating temperature 0 to 50 C (32-122 F) Operating humidity 80%RH(No condensate) Storage temperature -10 to 60 C (14-140F) Storage humidity 80%RH(No condensate) Operating environment Indoor, altitude up to 2000 meters
